===================================================================
@@ -135,6 +135,11 @@
renesas,groups = "usb1";
renesas,function = "usb1";
};
+
+ vin0_pins: vin0 {
+ renesas,groups = "vin0_data8", "vin0_clk";
+ renesas,function = "vin0";
+ };
};
&scif0 {
@@ -191,6 +196,19 @@
status = "okay";
clock-frequency = <400000>;
+
+ composite-in@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ remote = <&vin0>;
+
+ port {
+ adv7180: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin0ep>;
+ };
+ };
+ };
};
&qspi {
@@ -260,3 +278,20 @@
&pciec {
status = "okay";
};
+
+/* composite video input */
+&vin0 {
+ status = "ok";
+ pinctrl-0 = <&vin0_pins>;
+ pinctrl-names = "default";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin0ep: endpoint {
+ remote-endpoint = <&adv7180>;
+ bus-width = <8>;
+ };
+ };
+};
Define the Henninger board dependent part of the VIN0 device node. Add the device node for Analog Devices ADV7180 video decoder to I2C2 bus. Add the necessary subnodes to interconnect VIN0 and ADV7180 devices. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> --- Changes in version 2: - refreshed the patch. arch/arm/boot/dts/r8a7791-henninger.dts | 35 ++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html