diff mbox

[05/06] iommu/ipmmu-vmsa: Break out 32-bit ARM mapping code

Message ID 20151215120258.26216.81905.sendpatchset@little-apple (mailing list archive)
State Under Review
Delegated to: Geert Uytterhoeven
Headers show

Commit Message

Magnus Damm Dec. 15, 2015, 12:02 p.m. UTC 
From: Magnus Damm <damm+renesas@opensource.se>

Make the driver compile on more than just 32-bit ARM
by breaking out and wrapping ARM specific functions
in #ifdefs. Needed to be able to use the driver on
other architectures.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
---

 drivers/iommu/ipmmu-vmsa.c |   94 +++++++++++++++++++++++++++++---------------
 1 file changed, 62 insertions(+), 32 deletions(-)

--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Laurent Pinchart Dec. 29, 2015, 12:26 a.m. UTC | #1 
Hi Magnus,

Thank you for the patch.

On Tuesday 15 December 2015 21:02:58 Magnus Damm wrote:
> From: Magnus Damm <damm+renesas@opensource.se>
> 
> Make the driver compile on more than just 32-bit ARM
> by breaking out and wrapping ARM specific functions
> in #ifdefs. Needed to be able to use the driver on
> other architectures.

The only other architecture where we need to use the driver is ARM64, and I'm 
not sure this is the right fix to correctly support ARM and ARM64. I believe 
we should instead improve the ARM implementation to get rid of 
arm_iommu_create_mapping() and arm_iommu_attach_device() the same way that 
ARM64 did.

> Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
> ---
> 
> drivers/iommu/ipmmu-vmsa.c |   94 ++++++++++++++++++++++++++---------------
> 1 file changed, 62 insertions(+), 32 deletions(-)
> 
> --- 0007/drivers/iommu/ipmmu-vmsa.c
> +++ work/drivers/iommu/ipmmu-vmsa.c	2015-12-15 13:20:26.580513000 +0900
> @@ -22,8 +22,10 @@
>  #include <linux/sizes.h>
>  #include <linux/slab.h>
> 
> +#ifdef CONFIG_ARM
>  #include <asm/dma-iommu.h>
>  #include <asm/pgalloc.h>
> +#endif
> 
>  #include "io-pgtable.h"
> 
> @@ -38,7 +40,9 @@ struct ipmmu_vmsa_device {
>  	DECLARE_BITMAP(ctx, IPMMU_CTX_MAX);
>  	struct ipmmu_vmsa_domain *domains[IPMMU_CTX_MAX];
> 
> +#ifdef CONFIG_ARM
>  	struct dma_iommu_mapping *mapping;
> +#endif
>  };
> 
>  struct ipmmu_vmsa_domain {
> @@ -621,6 +625,60 @@ static int ipmmu_find_utlbs(struct ipmmu
>  	return 0;
>  }
> 
> +#ifdef CONFIG_ARM
> +static int ipmmu_map_attach(struct device *dev, struct ipmmu_vmsa_device
> *mmu)
> +{
> +	int ret;
> +
> +	/*
> +	 * Create the ARM mapping, used by the ARM DMA mapping core to allocate
> +	 * VAs. This will allocate a corresponding IOMMU domain.
> +	 *
> +	 * TODO:
> +	 * - Create one mapping per context (TLB).
> +	 * - Make the mapping size configurable ? We currently use a 2GB mapping
> +	 *   at a 1GB offset to ensure that NULL VAs will fault.
> +	 */
> +	if (!mmu->mapping) {
> +		struct dma_iommu_mapping *mapping;
> +
> +		mapping = arm_iommu_create_mapping(&platform_bus_type,
> +						   SZ_1G, SZ_2G);
> +		if (IS_ERR(mapping)) {
> +			dev_err(mmu->dev, "failed to create ARM IOMMU mapping\n");
> +			return PTR_ERR(mapping);
> +		}
> +
> +		mmu->mapping = mapping;
> +	}
> +
> +	/* Attach the ARM VA mapping to the device. */
> +	ret = arm_iommu_attach_device(dev, mmu->mapping);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to attach device to VA mapping\n");
> +		arm_iommu_release_mapping(mmu->mapping);
> +	}
> +
> +	return ret;
> +}
> +static inline void ipmmu_detach(struct device *dev)
> +{
> +	arm_iommu_detach_device(dev);
> +}
> +static inline void ipmmu_release_mapping(struct ipmmu_vmsa_device *mmu)
> +{
> +	arm_iommu_release_mapping(mmu->mapping);
> +}
> +#else
> +static inline int ipmmu_map_attach(struct device *dev,
> +				   struct ipmmu_vmsa_device *mmu)
> +{
> +	return 0;
> +}
> +static inline void ipmmu_detach(struct device *dev) {}
> +static inline void ipmmu_release_mapping(struct ipmmu_vmsa_device *mmu) {}
> +#endif
> +
>  static int ipmmu_add_device(struct device *dev)
>  {
>  	struct ipmmu_vmsa_dev_data *dev_data = get_dev_data(dev);
> @@ -701,41 +759,13 @@ static int ipmmu_add_device(struct devic
>  	dev_data->num_utlbs = num_utlbs;
>  	set_dev_data(dev, dev_data);
> 
> -	/*
> -	 * Create the ARM mapping, used by the ARM DMA mapping core to allocate
> -	 * VAs. This will allocate a corresponding IOMMU domain.
> -	 *
> -	 * TODO:
> -	 * - Create one mapping per context (TLB).
> -	 * - Make the mapping size configurable ? We currently use a 2GB mapping
> -	 *   at a 1GB offset to ensure that NULL VAs will fault.
> -	 */
> -	if (!mmu->mapping) {
> -		struct dma_iommu_mapping *mapping;
> -
> -		mapping = arm_iommu_create_mapping(&platform_bus_type,
> -						   SZ_1G, SZ_2G);
> -		if (IS_ERR(mapping)) {
> -			dev_err(mmu->dev, "failed to create ARM IOMMU mapping\n");
> -			ret = PTR_ERR(mapping);
> -			goto error;
> -		}
> -
> -		mmu->mapping = mapping;
> -	}
> -
> -	/* Attach the ARM VA mapping to the device. */
> -	ret = arm_iommu_attach_device(dev, mmu->mapping);
> -	if (ret < 0) {
> -		dev_err(dev, "Failed to attach device to VA mapping\n");
> +	ret = ipmmu_map_attach(dev, mmu);
> +	if (ret < 0)
>  		goto error;
> -	}
> 
>  	return 0;
> 
>  error:
> -	arm_iommu_release_mapping(mmu->mapping);
> -
>  	kfree(dev_data);
>  	kfree(utlbs);
> 
> @@ -751,7 +781,7 @@ static void ipmmu_remove_device(struct d
>  {
>  	struct ipmmu_vmsa_dev_data *dev_data = get_dev_data(dev);
> 
> -	arm_iommu_detach_device(dev);
> +	ipmmu_detach(dev);
>  	iommu_group_remove_device(dev);
> 
>  	kfree(dev_data->utlbs);
> @@ -862,7 +892,7 @@ static int ipmmu_remove(struct platform_
>  	list_del(&mmu->list);
>  	spin_unlock(&ipmmu_devices_lock);
> 
> -	arm_iommu_release_mapping(mmu->mapping);
> +	ipmmu_release_mapping(mmu);
> 
>  	ipmmu_device_reset(mmu);
diff mbox

Patch

--- 0007/drivers/iommu/ipmmu-vmsa.c
+++ work/drivers/iommu/ipmmu-vmsa.c	2015-12-15 13:20:26.580513000 +0900
@@ -22,8 +22,10 @@ 
 #include <linux/sizes.h>
 #include <linux/slab.h>
 
+#ifdef CONFIG_ARM
 #include <asm/dma-iommu.h>
 #include <asm/pgalloc.h>
+#endif
 
 #include "io-pgtable.h"
 
@@ -38,7 +40,9 @@  struct ipmmu_vmsa_device {
 	DECLARE_BITMAP(ctx, IPMMU_CTX_MAX);
 	struct ipmmu_vmsa_domain *domains[IPMMU_CTX_MAX];
 
+#ifdef CONFIG_ARM
 	struct dma_iommu_mapping *mapping;
+#endif
 };
 
 struct ipmmu_vmsa_domain {
@@ -621,6 +625,60 @@  static int ipmmu_find_utlbs(struct ipmmu
 	return 0;
 }
 
+#ifdef CONFIG_ARM
+static int ipmmu_map_attach(struct device *dev, struct ipmmu_vmsa_device *mmu)
+{
+	int ret;
+
+	/*
+	 * Create the ARM mapping, used by the ARM DMA mapping core to allocate
+	 * VAs. This will allocate a corresponding IOMMU domain.
+	 *
+	 * TODO:
+	 * - Create one mapping per context (TLB).
+	 * - Make the mapping size configurable ? We currently use a 2GB mapping
+	 *   at a 1GB offset to ensure that NULL VAs will fault.
+	 */
+	if (!mmu->mapping) {
+		struct dma_iommu_mapping *mapping;
+
+		mapping = arm_iommu_create_mapping(&platform_bus_type,
+						   SZ_1G, SZ_2G);
+		if (IS_ERR(mapping)) {
+			dev_err(mmu->dev, "failed to create ARM IOMMU mapping\n");
+			return PTR_ERR(mapping);
+		}
+
+		mmu->mapping = mapping;
+	}
+
+	/* Attach the ARM VA mapping to the device. */
+	ret = arm_iommu_attach_device(dev, mmu->mapping);
+	if (ret < 0) {
+		dev_err(dev, "Failed to attach device to VA mapping\n");
+		arm_iommu_release_mapping(mmu->mapping);
+	}
+
+	return ret;
+}
+static inline void ipmmu_detach(struct device *dev)
+{
+	arm_iommu_detach_device(dev);
+}
+static inline void ipmmu_release_mapping(struct ipmmu_vmsa_device *mmu)
+{
+	arm_iommu_release_mapping(mmu->mapping);
+}
+#else
+static inline int ipmmu_map_attach(struct device *dev,
+				   struct ipmmu_vmsa_device *mmu)
+{
+	return 0;
+}
+static inline void ipmmu_detach(struct device *dev) {}
+static inline void ipmmu_release_mapping(struct ipmmu_vmsa_device *mmu) {}
+#endif
+
 static int ipmmu_add_device(struct device *dev)
 {
 	struct ipmmu_vmsa_dev_data *dev_data = get_dev_data(dev);
@@ -701,41 +759,13 @@  static int ipmmu_add_device(struct devic
 	dev_data->num_utlbs = num_utlbs;
 	set_dev_data(dev, dev_data);
 
-	/*
-	 * Create the ARM mapping, used by the ARM DMA mapping core to allocate
-	 * VAs. This will allocate a corresponding IOMMU domain.
-	 *
-	 * TODO:
-	 * - Create one mapping per context (TLB).
-	 * - Make the mapping size configurable ? We currently use a 2GB mapping
-	 *   at a 1GB offset to ensure that NULL VAs will fault.
-	 */
-	if (!mmu->mapping) {
-		struct dma_iommu_mapping *mapping;
-
-		mapping = arm_iommu_create_mapping(&platform_bus_type,
-						   SZ_1G, SZ_2G);
-		if (IS_ERR(mapping)) {
-			dev_err(mmu->dev, "failed to create ARM IOMMU mapping\n");
-			ret = PTR_ERR(mapping);
-			goto error;
-		}
-
-		mmu->mapping = mapping;
-	}
-
-	/* Attach the ARM VA mapping to the device. */
-	ret = arm_iommu_attach_device(dev, mmu->mapping);
-	if (ret < 0) {
-		dev_err(dev, "Failed to attach device to VA mapping\n");
+	ret = ipmmu_map_attach(dev, mmu);
+	if (ret < 0)
 		goto error;
-	}
 
 	return 0;
 
 error:
-	arm_iommu_release_mapping(mmu->mapping);
-
 	kfree(dev_data);
 	kfree(utlbs);
 
@@ -751,7 +781,7 @@  static void ipmmu_remove_device(struct d
 {
 	struct ipmmu_vmsa_dev_data *dev_data = get_dev_data(dev);
 
-	arm_iommu_detach_device(dev);
+	ipmmu_detach(dev);
 	iommu_group_remove_device(dev);
 
 	kfree(dev_data->utlbs);
@@ -862,7 +892,7 @@  static int ipmmu_remove(struct platform_
 	list_del(&mmu->list);
 	spin_unlock(&ipmmu_devices_lock);
 
-	arm_iommu_release_mapping(mmu->mapping);
+	ipmmu_release_mapping(mmu);
 
 	ipmmu_device_reset(mmu);