@@ -15,3 +15,4 @@ common a set of Linux helpers for ELF sections are also documented.
background
section-core
+ ranges
new file mode 100644
@@ -0,0 +1,74 @@
+====================
+Linux section ranges
+====================
+
+This documents Linux' use of section ranges, how you can use
+them and how they work.
+
+About section ranges
+====================
+
+Introduction
+------------
+.. kernel-doc:: include/linux/ranges.h
+ :doc: Introduction
+
+Section range module support
+----------------------------
+.. kernel-doc:: include/linux/ranges.h
+ :doc: Section range module support
+
+Section range helpers
+=====================
+.. kernel-doc:: include/linux/ranges.h
+ :doc: Section range helpers
+
+SECTION_RANGE_START
+-------------------
+.. kernel-doc:: include/linux/ranges.h
+ :functions: SECTION_RANGE_START
+
+SECTION_RANGE_END
+-----------------
+.. kernel-doc:: include/linux/ranges.h
+ :functions: SECTION_RANGE_END
+
+SECTION_RANGE_SIZE
+------------------
+.. kernel-doc:: include/linux/ranges.h
+ :functions: SECTION_RANGE_SIZE
+
+SECTION_RANGE_EMPTY
+-------------------
+.. kernel-doc:: include/linux/ranges.h
+ :functions: SECTION_RANGE_EMPTY
+
+SECTION_RANGE_ADDR_WITHIN
+-------------------------
+.. kernel-doc:: include/linux/ranges.h
+ :functions: SECTION_RANGE_ADDR_WITHIN
+
+SECTION_RANGE_ALIGNMENT
+-------------------------
+.. kernel-doc:: include/linux/ranges.h
+ :functions: SECTION_RANGE_ALIGNMENT
+
+DECLARE_SECTION_RANGE
+---------------------
+.. kernel-doc:: include/linux/ranges.h
+ :functions: DECLARE_SECTION_RANGE
+
+DEFINE_SECTION_RANGE
+--------------------
+.. kernel-doc:: include/linux/ranges.h
+ :functions: DEFINE_SECTION_RANGE
+
+__LINUX_RANGE
+-------------
+.. kernel-doc:: include/asm-generic/ranges.h
+ :functions: __LINUX_RANGE
+
+__LINUX_RANGE_ORDER
+-------------------
+.. kernel-doc:: include/asm-generic/ranges.h
+ :functions: __LINUX_RANGE_ORDER
@@ -114,6 +114,11 @@ Linux .ref\* sections
.. kernel-doc:: include/asm-generic/section-core.h
:doc: .ref.rodata
+Linux section ordering
+======================
+.. kernel-doc:: include/asm-generic/section-core.h
+ :doc: Linux section ordering
+
Generic Linux kernel section helpers
====================================
@@ -5424,6 +5424,16 @@ S: Supported
F: drivers/base/power/domain*.c
F: include/linux/pm_domain.h
+GENERIC SECTION RANGES
+M: "Luis R. Rodriguez" <mcgrof@kernel.org>
+M: "H. Peter Anvin" <hpa@zytor.com>
+L: linux-arch@vger.kernel.org
+L: linux-kernel@vger.kernel.org
+S: Supported
+F: include/asm-generic/ranges.h
+F: include/linux/ranges.h
+F: Documentation/sections/ranges.rst
+
GENERIC SECTIONS
M: "Luis R. Rodriguez" <mcgrof@kernel.org>
M: Josh Poimboeuf <jpoimboe@redhat.com>
@@ -11,3 +11,4 @@ generic-y += preempt.h
generic-y += sections.h
generic-y += trace_clock.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -52,3 +52,4 @@ generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -42,3 +42,4 @@ generic-y += unaligned.h
generated-y += mach-types.h
generated-y += unistd-nr.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -46,3 +46,4 @@ generic-y += user.h
generic-y += vga.h
generic-y += xor.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -23,3 +23,4 @@ generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -48,3 +48,4 @@ generic-y += user.h
generic-y += word-at-a-time.h
generic-y += xor.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -63,3 +63,4 @@ generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -46,3 +46,4 @@ generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -9,3 +9,4 @@ generic-y += preempt.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -76,3 +76,4 @@ generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -61,3 +61,4 @@ generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -10,3 +10,4 @@ generic-y += trace_clock.h
generic-y += vtime.h
generic-y += word-at-a-time.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -12,3 +12,4 @@ generic-y += sections.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -35,3 +35,4 @@ generic-y += types.h
generic-y += word-at-a-time.h
generic-y += xor.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -56,3 +56,4 @@ generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -12,3 +12,4 @@ generic-y += syscalls.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -22,3 +22,4 @@ generic-y += user.h
generic-y += word-at-a-time.h
generic-y += xor.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -11,3 +11,4 @@ generic-y += sections.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -64,3 +64,4 @@ generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -72,3 +72,4 @@ generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -29,3 +29,4 @@ generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -9,3 +9,4 @@ generic-y += preempt.h
generic-y += rwsem.h
generic-y += vtime.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -107,6 +107,7 @@ SECTIONS
#endif
/* careful! __ftr_alt_* sections need to be close to .text */
*(.text .fixup __ftr_alt_* .ref.text)
+ *(SORT(.text.rng.*))
SCHED_TEXT
CPUIDLE_TEXT
LOCK_TEXT
@@ -9,3 +9,4 @@ generic-y += preempt.h
generic-y += trace_clock.h
generic-y += word-at-a-time.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -15,3 +15,4 @@ generic-y += xor.h
generic-y += serial.h
generic-y += word-at-a-time.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -40,3 +40,4 @@ generic-y += trace_clock.h
generic-y += ucontext.h
generic-y += xor.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -22,3 +22,4 @@ generic-y += trace_clock.h
generic-y += types.h
generic-y += word-at-a-time.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -41,3 +41,4 @@ generic-y += trace_clock.h
generic-y += types.h
generic-y += xor.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -27,3 +27,4 @@ generic-y += trace_clock.h
generic-y += word-at-a-time.h
generic-y += xor.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -61,3 +61,4 @@ generic-y += user.h
generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
+generic-y += ranges.h
@@ -13,3 +13,4 @@ generic-y += early_ioremap.h
generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
generic-y += section-core.h
+generic-y += ranges.h
@@ -68,6 +68,8 @@ static const char * const sym_regex_kernel[S_NSYMTYPES] = {
"__end_rodata|"
"__initramfs_start|"
"(jiffies|jiffies_64)|"
+ ".rodata..rng.*|"
+ ".init.text..rng.*|"
#if ELF_BITS == 64
"__per_cpu_load|"
"init_per_cpu__.*|"
@@ -33,3 +33,4 @@ generic-y += trace_clock.h
generic-y += word-at-a-time.h
generic-y += xor.h
generic-y += section-core.h
+generic-y += ranges.h
new file mode 100644
@@ -0,0 +1,93 @@
+#ifndef _ASM_GENERIC_RANGES_H_
+#define _ASM_GENERIC_RANGES_H_
+/*
+ * Copyright (C) 2016 Luis R. Rodriguez <mcgrof@kernel.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of copyleft-next (version 0.3.1 or later) as published
+ * at http://copyleft-next.org/.
+ */
+#include <asm/section-core.h>
+
+#ifndef set_section_rng
+# define set_section_rng(section, name, flags) \
+ set_section_core(section, rng, name, \
+ any, flags)
+#endif
+
+#ifndef set_section_rng_type
+# define set_section_rng_type(section, name, flags, type) \
+ set_section_core_type(section, rng, name, \
+ any, flags, type)
+#endif
+
+#ifndef set_section_rng_level
+# define set_section_rng_level(section, name, level, flags) \
+ set_section_core(section, rng, name, level, flags)
+#endif
+
+#ifndef push_section_rng
+# define push_section_rng(section, name, flags) \
+ push_section_core(section, rng, name, \
+ any, flags)
+#endif
+
+#ifndef push_section_rng_level
+# define push_section_rng_level(section, name, level, flags) \
+ push_section_core(section, rng, name, \
+ level, flags)
+#endif
+
+#ifndef __ASSEMBLY__
+/**
+ * __LINUX_RANGE - short hand association into a section range
+ *
+ * @section: ELF section name to place section range into
+ * @name: section range name
+ *
+ * This helper can be used by subsystems to define their own subsystem
+ * specific helpers to easily associate a piece of code being defined to a
+ * section range.
+ */
+#define __LINUX_RANGE(section, name) \
+ __attribute__((__section__(#section "..rng.name.any")))
+
+/**
+ * __LINUX_RANGE_ORDER - short hand association into a section range of order
+ *
+ * @section: ELF section name to place section range into
+ * @name: section range name
+ * @level: order level, a number. The order level gets tucked into the
+ * section as a postfix string. Order levels are sorted using
+ * binutils SORT(), the number is sorted as a string, as such be
+ * sure to fill with zeroes any empty digits. For instance if you are
+ * using 3 levels of digits for order levels, use 001 for the first entry,
+ * 0002 for the second, 999 for the last entry. You can use however many
+ * digits you need.
+ *
+ * This helper can be used by subsystems to define their own subsystem specific
+ * helpers to easily associate a piece of code being defined to a section range
+ * with an associated specific order level. The order level provides the
+ * ability for explicit user ordering of code. Sorting takes place at link
+ * time, after compilation.
+ */
+#define __LINUX_RANGE_ORDER(section, name, level) \
+ __attribute__((__section__(#section "..rng.name." #level)))
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __ASSEMBLER__
+
+#ifndef DEFINE_SECTION_RANGE
+#define DEFINE_SECTION_RANGE(section, name) \
+ push_section_rng_level(section, name,,) ; \
+ .globl name ; \
+name: ; \
+ .popsection \
+ \
+ push_section_rng_level(section, name, ~,) ; \
+ .popsection
+#endif
+#endif /* __ASSEMBLER__ */
+
+#endif /* _ASM_GENERIC_RANGES_H_ */
@@ -183,6 +183,47 @@
* or data structures part of the init sections.
*/
+/**
+ * DOC: Linux section ordering
+ *
+ * Linux may use binutils linker-script 'SORT()' on sections to sort Linux
+ * sections alpha numerically. Linux has historically used 'SORT()' in
+ * ``include/asm-generic/vmlinux.lds.h``, its a well established practice. If
+ * 'SORT()' is used on a section one can provide ordering using a postfix on
+ * each section entry added. For instance if a linker script uses::
+ *
+ * SORT(.foo.*)
+ *
+ * one can then add entries with explicit ordering using numeric postfixes for
+ * each entry, we refer to these as 'order levels'. Since 'SORT()' sorts alpha
+ * numerically a specific series set of digits must be agreed a-priori which
+ * would give also an idea of the max expected number of entries added to a
+ * section. For instance, if you expect a maximum of 999 entries you can use
+ * 3 digits for a section order level. If you wanted an entry to be ordered
+ * first you could use the postfix '000', if you wanted an entry to follow this
+ * you could use '001', and so on. We could for instance have::
+ *
+ * .foo.000
+ * .foo.001
+ * .foo.002
+ *
+ * Often times one may want the option to specify no order is required for
+ * certain elements added to a section which does use 'SORT()' on the linker
+ * script. You can use any arbitrary string value to to specify no order is
+ * used, so long as its used consistantly. For instance, one possibility is to
+ * use the 'any' postfix. All entries on the section would then have no
+ * specific ordering::
+ *
+ * .foo.any
+ * .foo.any
+ * .foo.any
+ *
+ * To help establish a convention we reserve the special name 'any' for this
+ * purpose. Developers can use and expect the 'any' postfix string on sections
+ * as a helper to annotate section ordering at link time is not relevant
+ * for entries on a section.
+ */
+
/* Can be used on foo.S for instance */
#ifndef __set_section_core_type
# define __set_section_core_type(___section, ___core, ___name, \
@@ -56,6 +56,7 @@
#include <linux/export.h>
#include <asm/section-core.h>
+#include <asm/ranges.h>
/* Align . to a 8 byte boundary equals to maximum function alignment. */
#define ALIGN_FUNCTION() . = ALIGN(8)
@@ -205,6 +206,7 @@
*/
#define DATA_DATA \
*(.data .data.[0-9a-zA-Z_]*) \
+ *(SORT(.data..rng.*)) \
*(.ref.data) \
*(.data..shared_aligned) /* percpu related */ \
MEM_KEEP(init.data) \
@@ -273,7 +275,9 @@
. = ALIGN((align)); \
.rodata : AT(ADDR(.rodata) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start_rodata) = .; \
- *(.rodata) *(.rodata.*) \
+ *(.rodata) \
+ *(SORT(.rodata..rng.*)) \
+ *(.rodata.*) \
RO_AFTER_INIT_DATA /* Read only after init */ \
KEEP(*(__vermagic)) /* Kernel version magic */ \
. = ALIGN(8); \
@@ -446,7 +450,9 @@
* conflicting section names, and must pull in .text.[0-9a-zA-Z_]* */
#define TEXT_TEXT \
ALIGN_FUNCTION(); \
- *(.text.hot .text .text.fixup .text.unlikely) \
+ *(.text.hot .text) \
+ *(SORT(.text..rng.*)) \
+ *(.text.fixup .text.unlikely) \
*(.ref.text) \
MEM_KEEP(init.text) \
MEM_KEEP(exit.text) \
@@ -549,6 +555,7 @@
#define INIT_DATA \
KEEP(*(SORT(___kentry+*))) \
*(.init.data) \
+ *(SORT(.init.data..rng.*)) \
MEM_DISCARD(init.data) \
KERNEL_CTORS() \
MCOUNT_REC() \
@@ -572,6 +579,7 @@
#define INIT_TEXT \
*(.init.text) \
+ *(SORT(.init.text..rng.*)) \
*(.text.startup) \
MEM_DISCARD(init.text)
new file mode 100644
@@ -0,0 +1,183 @@
+#ifndef _LINUX_RANGES_H
+#define _LINUX_RANGES_H
+/*
+ * Linux section ranges
+ *
+ * Copyright (C) 2016 Luis R. Rodriguez <mcgrof@kernel.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of copyleft-next (version 0.3.1 or later) as published
+ * at http://copyleft-next.org/.
+ */
+#include <linux/sections.h>
+#include <asm/ranges.h>
+
+#ifndef __ASSEMBLY__
+
+/**
+ * DOC: Introduction
+ *
+ * A section ranges consists of explicitly annotated series executable code
+ * stitched together for the purpose of selective placement into standard or
+ * architecture specific ELF sections. What ELF section is used is utility
+ * specific. Linux has historically implicitly used section ranges, however
+ * they were all built in an adhoc manner and typically required linker script
+ * modifications per architecture. The section range API allows adding new
+ * bundles of stiched executable code into custom ELF sections by only
+ * modifying C or asm code in an architecture agnostic form.
+ *
+ * This documents the set of helpers available to declare, and define section
+ * ranges and associate each section range to a specific Linux ELF section.
+ */
+
+/**
+ * DOC: Section range module support
+ *
+ * Modules can use section ranges, however the section range definition must be
+ * built-in to the kernel. That is, the code that implements
+ * DEFINE_SECTION_RANGE() must be built-in, and modular code cannot add more
+ * items in to the section range (with __LINUX_RANGE() or
+ * __LINUX_RANGE_ORDER()), unless kernel/module.c find_module_sections() and
+ * module-common.lds.S are updated accordingly with a respective module
+ * notifier to account for updates. This restriction may be enhanced in the
+ * future.
+ */
+
+/**
+ * DOC: Section range helpers
+ *
+ * These are helpers for section ranges.
+ */
+
+/**
+ * SECTION_RANGE_START - get address of start of section range
+ *
+ * @name: name of the section range
+ *
+ * This gives you the start address of the section range.
+ * This should give you the address of the first entry.
+ *
+ */
+#define SECTION_RANGE_START(name) LINUX_SECTION_START(name)
+
+/**
+ * SECTION_RANGE_END - get address of end of the section range
+ *
+ * @name: name of the section range
+ *
+ * This gives you the end address of the linker table.
+ * This will match the start address if the linker table
+ * is empty.
+ */
+#define SECTION_RANGE_END(name) LINUX_SECTION_END(name)
+
+/**
+ * SECTION_RANGE_SIZE - get number of entries in the section range
+ *
+ * @name: name of the section range
+ *
+ * This gives you the number of entries in the section range.
+ * Example usage:
+ *
+ * unsigned int num_ents = LINKTABLE_SIZE(some_fns);
+ */
+#define SECTION_RANGE_SIZE(name) \
+ ((SECTION_RANGE_END(name)) - (SECTION_RANGE_START(name)))
+
+/**
+ * SECTION_RANGE_EMPTY - check if section range has no entries
+ *
+ * @name: name of the section range
+ *
+ * Returns true if the section range is emtpy.
+ *
+ * bool is_empty = LINKTABLE_EMPTY(some_fns);
+ */
+#define SECTION_RANGE_EMPTY(name) (SECTION_RANGE_SIZE(name) == 0)
+
+/**
+ * SECTION_RANGE_ADDR_WITHIN - returns true if address is in the section range
+ *
+ * @name: name of the section range
+ * @addr: address to query for
+ *
+ * Returns true if the address is in the section range.
+ */
+#define SECTION_RANGE_ADDR_WITHIN(name, addr) \
+ (addr >= (unsigned long) SECTION_RANGE_START(name) && \
+ addr < (unsigned long) SECTION_RANGE_END(name))
+
+/**
+ * SECTION_RANGE_ALIGNMENT - get the alignment of the section range
+ *
+ * @name: name of linker table
+ *
+ * Gives you the alignment for the section range.
+ */
+#define SECTION_RANGE_ALIGNMENT(name) LINUX_SECTION_ALIGNMENT(name)
+
+/**
+ * DECLARE_SECTION_RANGE - Declares a section range
+ *
+ * @name: section range name
+ *
+ * Declares a section range to help code access the range. Typically if
+ * a subsystems needs code to have direct access to the section range the
+ * subsystem's header file would declare the section range. Care should be
+ * taken to only declare the section range in a header file if access to it
+ * is truly needed outside of the code defining it. You typically would
+ * rather instead provide helpers which access the section range with special
+ * code on behalf of the caller.
+ */
+#define DECLARE_SECTION_RANGE(name) \
+ DECLARE_LINUX_SECTION_RO(char, name)
+
+/**
+ * __SECTION_RANGE_BEGIN - Constructs the beginning of a section range
+ *
+ * @name: section range name
+ * @__section: ELF section to place section range into
+ *
+ * Constructs the beginning of a section range. You will typically not need
+ * to use this directly.
+ */
+#define __SECTION_RANGE_BEGIN(name, __section) \
+ const __typeof__(SECTION_RANGE_START(name)[0]) \
+ __attribute__((used, \
+ weak, \
+ __aligned__(SECTION_RANGE_ALIGNMENT(name)),\
+ section(#__section "..rng.name.")))
+
+/**
+ * __SECTION_RANGE_END - Constructs the end of a section range
+ *
+ * @name: section range name
+ * @__section: ELF section to place section range into
+ *
+ * Constructs the end of a section range. You will typically not need
+ * to use this directly.
+ */
+#define __SECTION_RANGE_END(name, __section) \
+ const __typeof__(SECTION_RANGE_START(name)[0]) \
+ __attribute__((used, \
+ __aligned__(SECTION_RANGE_ALIGNMENT(name)),\
+ section(#__section "..rng.name.~")))
+
+/**
+ * DEFINE_SECTION_RANGE - Defines a section range
+ *
+ * @name: section range name
+ * @section: ELF section name to place section range into
+ *
+ * Defines a section range, used for executable code. Section ranges are
+ * defined in the code that takes ownership and makes use of the section
+ * range.
+ */
+#define DEFINE_SECTION_RANGE(name, section) \
+ DECLARE_LINUX_SECTION_RO(char, name); \
+ __SECTION_RANGE_BEGIN(name, section) SECTION_RANGE_START(name)[0] = {};\
+ __SECTION_RANGE_END(name, section) SECTION_RANGE_END(name)[0] = {}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _LINUX_RANGES_H */
Section ranges are on one of the types of custom sections types used in Linux. This provides a series of helpers for defining them and using them. Most importantly this also enables us to avoid modifying the linker script when we add a new section range. It turns out a lot of custom sections are actually section ranges, and these are typically spelled out in their architecture specific asm/sections.h file -- we enable architectures to override what asm is used for section ranges but start by default trusting the asm-generic version all around. Although typically you will not want to have section ranges ordered we must use SORT() on vmlinux.lds.S for section ranges to enable us to extend a section range without modifying the linker script. To accomplish this we use a special order string for the first element of a section range -- the empty string "" (refer to __SECTION_RANGE_BEGIN()), then "~" for the last element (refer to __SECTION_RANGE_BEGIN()). If you use the "any" order for elements in between and use SORT() you end up keeping any added element in betweeen and a reference to the beginning and end of the section range without requiring custom linker script modifications. Specific order annotations are also supported to help construct synthetic functions, a demo for which will be provided later. v5: o Use ..rng.* instead of .rng.* as suggested by Nicholas Piggin. This is the typical way to avoid clash with compiler generated section. o Replace section macros with section names o Extend commit log to justify SORT() and explain why and how we use specific special strings for the beginning, end elements of a section range and the "any" order for elements in between. o Drop SECTION_RNG_ALL() -- we no longer need this on linker scripts o To make this easier to read, as per Nicholas Piggin, add our own SECTION_RANGE_START(), SECTION_RANGE_END(). After reviewing the changes affected by this it seemed clearer and better then to also use our own specific SECTION_RANGE_SIZE(), and SECTION_RANGE_EMPTY(), and SECTION_RANGE_ALIGNMENT() as well. o We were using LINUX_SECTION_START() and LINUX_SECTION_END() in some places but in some other places VMLINUX_SYMBOL(name), VMLINUX_SYMBOL(name##__end). Since we are adding SECTION_RANGE_START() and SECTION_RANGE_END() just use those consistently. o Move the linker table *(SORT(.data.rng.*)) to be present before the recently added *(.data.[0-9a-zA-Z_]*) to ensure we keep sort order on the section range. o Adds the "Linux section ordering" documentation, as its much more relevant after this patch, in particular when treating the "any" order level. o Fix powerpc .text use: -- it does not use TEXT_TEXT so we must add our *(SORT(.text.rng.*)) to its linker script manually. v4: o tons of documentation love o fix arch/x86/tools/relocs.c typo - which caused compilation issues on old toolchains o port to new shiny sphinx documentation o sprinkle a few more needed VMLINUX_SYMBOL() - fixes compilation on blackfin o name changes as suggested by Boris: - %s/SECTION_TYPE_RANGES/rng/g - %s/SECTION_TYPE/SECTION_CORE/g - %s/section_type_asmtype/section_core_type/g - %s/section_type/section_core/g - %s/section_rng/set_section_rng/g - rebrand DECLARE_SECTION_RNG() as DEFINE_SECTION_RANGE() - this is the asm version of the respective C version, this will have a userspace C demo added later. o move __LINUX_RANGE() and __LINUX_RANGE_ORDER() - fixes builds on sparc o adds section ranges to linker script o rename SECTION_RANGE_ALL() o use default alignment, fixes builds on powerpc and arm for both __LINUX_RANGE() and __LINUX_RANGE_ORDER() o expand documentation to document modules support o add maintainers o use generic-y v3: new in this series, uses copyleft-next Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> --- Documentation/sections/index.rst | 1 + Documentation/sections/ranges.rst | 74 +++++++++++++ Documentation/sections/section-core.rst | 5 + MAINTAINERS | 10 ++ arch/alpha/include/asm/Kbuild | 1 + arch/arc/include/asm/Kbuild | 1 + arch/arm/include/asm/Kbuild | 1 + arch/arm64/include/asm/Kbuild | 1 + arch/avr32/include/asm/Kbuild | 1 + arch/blackfin/include/asm/Kbuild | 1 + arch/c6x/include/asm/Kbuild | 1 + arch/cris/include/asm/Kbuild | 1 + arch/frv/include/asm/Kbuild | 1 + arch/h8300/include/asm/Kbuild | 1 + arch/hexagon/include/asm/Kbuild | 1 + arch/ia64/include/asm/Kbuild | 1 + arch/m32r/include/asm/Kbuild | 1 + arch/m68k/include/asm/Kbuild | 1 + arch/metag/include/asm/Kbuild | 1 + arch/microblaze/include/asm/Kbuild | 1 + arch/mips/include/asm/Kbuild | 1 + arch/mn10300/include/asm/Kbuild | 1 + arch/nios2/include/asm/Kbuild | 1 + arch/openrisc/include/asm/Kbuild | 1 + arch/parisc/include/asm/Kbuild | 1 + arch/powerpc/include/asm/Kbuild | 1 + arch/powerpc/kernel/vmlinux.lds.S | 1 + arch/s390/include/asm/Kbuild | 1 + arch/score/include/asm/Kbuild | 1 + arch/sh/include/asm/Kbuild | 1 + arch/sparc/include/asm/Kbuild | 1 + arch/tile/include/asm/Kbuild | 1 + arch/um/include/asm/Kbuild | 1 + arch/unicore32/include/asm/Kbuild | 1 + arch/x86/include/asm/Kbuild | 1 + arch/x86/tools/relocs.c | 2 + arch/xtensa/include/asm/Kbuild | 1 + include/asm-generic/ranges.h | 93 ++++++++++++++++ include/asm-generic/section-core.h | 41 +++++++ include/asm-generic/vmlinux.lds.h | 12 ++- include/linux/ranges.h | 183 ++++++++++++++++++++++++++++++++ 41 files changed, 451 insertions(+), 2 deletions(-) create mode 100644 Documentation/sections/ranges.rst create mode 100644 include/asm-generic/ranges.h create mode 100644 include/linux/ranges.h