@@ -173,33 +173,20 @@ static int i2c_pca_pf_probe(struct platform_device *pdev)
i2c->adap.dev.parent = &pdev->dev;
i2c->adap.dev.of_node = np;
+ i2c->gpio = devm_gpiod_get_optional(&pdev->dev, "reset-gpios", GPIOD_OUT_LOW);
+ if (IS_ERR(i2c->gpio))
+ return PTR_ERR(i2c->gpio);
+
if (platform_data) {
i2c->adap.timeout = platform_data->timeout;
i2c->algo_data.i2c_clock = platform_data->i2c_clock_speed;
- if (gpio_is_valid(platform_data->gpio)) {
- ret = devm_gpio_request_one(&pdev->dev,
- platform_data->gpio,
- GPIOF_ACTIVE_LOW,
- i2c->adap.name);
- if (ret == 0) {
- i2c->gpio = gpio_to_desc(platform_data->gpio);
- gpiod_direction_output(i2c->gpio, 0);
- } else {
- dev_warn(&pdev->dev, "Registering gpio failed!\n");
- i2c->gpio = NULL;
- }
- }
} else if (np) {
i2c->adap.timeout = HZ;
- i2c->gpio = devm_gpiod_get_optional(&pdev->dev, "reset-gpios", GPIOD_OUT_LOW);
- if (IS_ERR(i2c->gpio))
- return PTR_ERR(i2c->gpio);
of_property_read_u32_index(np, "clock-frequency", 0,
&i2c->algo_data.i2c_clock);
} else {
i2c->adap.timeout = HZ;
i2c->algo_data.i2c_clock = 59000;
- i2c->gpio = NULL;
}
i2c->algo_data.data = i2c;
Allow for the reset-gpios property to be defined in the device tree or via a GPIO lookup table. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> --- Changes in v2: - move call up above platform_data usage drivers/i2c/busses/i2c-pca-platform.c | 21 ++++----------------- 1 file changed, 4 insertions(+), 17 deletions(-)