| Message ID | 20190320102141.19316-6-geert+renesas@glider.be (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | pinctrl: sh-pfc: Validation and compile-testing | expand |
On Wed, Mar 20, 2019 at 11:21:36AM +0100, Geert Uytterhoeven wrote: > Enable compile-testing of all Renesas SuperH and ARM pin control > drivers, in a similar way as was done before for clock and SoC drivers > in commits 371dd373c6edd557 ("clk: renesas: Allow compile-testing of all > (sub)drivers") and 8be381a131c29c47 ("soc: renesas: Rework Kconfig and > Makefile logic"). > > The SuperH pin control drivers need specific include files, hence make > sure they are always found when compile-testing. > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> > --- > v3: > - No changes, > > v2: > - Add proper COMPILE_TEST support, instead of just enabling all > drivers unconditionally, > - Drop RFC state. > --- > drivers/pinctrl/sh-pfc/Kconfig | 174 ++++++++++++++------------------ > drivers/pinctrl/sh-pfc/Makefile | 15 +++ > 2 files changed, 90 insertions(+), 99 deletions(-) > > diff --git a/drivers/pinctrl/sh-pfc/Kconfig b/drivers/pinctrl/sh-pfc/Kconfig > index 6a9e4334dbfa7ec0..2dd716b016a3f39b 100644 > --- a/drivers/pinctrl/sh-pfc/Kconfig > +++ b/drivers/pinctrl/sh-pfc/Kconfig > @@ -3,19 +3,53 @@ > # Renesas SH and SH Mobile PINCTRL drivers > # > > -if ARCH_RENESAS || SUPERH > - > config PINCTRL_SH_PFC > + bool "Renesas SoC pin control support" if COMPILE_TEST && !(ARCH_RENESAS || SUPERH) > + default y if ARCH_RENESAS || SUPERH > select PINMUX > select PINCONF > select GENERIC_PINCONF > - def_bool y > + select PINCTRL_PFC_EMEV2 if ARCH_EMEV2 > + select PINCTRL_PFC_R8A73A4 if ARCH_R8A73A4 > + select PINCTRL_PFC_R8A7740 if ARCH_R8A7740 > + select PINCTRL_PFC_R8A7743 if ARCH_R8A7743 > + select PINCTRL_PFC_R8A7744 if ARCH_R8A7744 > + select PINCTRL_PFC_R8A7745 if ARCH_R8A7745 > + select PINCTRL_PFC_R8A77470 if ARCH_R8A77470 > + select PINCTRL_PFC_R8A774A1 if ARCH_R8A774A1 > + select PINCTRL_PFC_R8A774C0 if ARCH_R8A774C0 > + select PINCTRL_PFC_R8A7778 if ARCH_R8A7778 > + select PINCTRL_PFC_R8A7779 if ARCH_R8A7779 > + select PINCTRL_PFC_R8A7790 if ARCH_R8A7790 > + select PINCTRL_PFC_R8A7791 if ARCH_R8A7791 > + select PINCTRL_PFC_R8A7792 if ARCH_R8A7792 > + select PINCTRL_PFC_R8A7793 if ARCH_R8A7793 > + select PINCTRL_PFC_R8A7794 if ARCH_R8A7794 > + select PINCTRL_PFC_R8A7795 if ARCH_R8A7795 > + select PINCTRL_PFC_R8A7796 if ARCH_R8A7796 > + select PINCTRL_PFC_R8A77965 if ARCH_R8A77965 > + select PINCTRL_PFC_R8A77970 if ARCH_R8A77970 > + select PINCTRL_PFC_R8A77980 if ARCH_R8A77980 > + select PINCTRL_PFC_R8A77990 if ARCH_R8A77990 > + select PINCTRL_PFC_R8A77995 if ARCH_R8A77995 > + select PINCTRL_PFC_SH7203 if CPU_SUBTYPE_SH7203 > + select PINCTRL_PFC_SH7264 if CPU_SUBTYPE_SH7264 > + select PINCTRL_PFC_SH7269 if CPU_SUBTYPE_SH7269 > + select PINCTRL_PFC_SH73A0 if ARCH_SH73A0 > + select PINCTRL_PFC_SH7720 if CPU_SUBTYPE_SH7720 > + select PINCTRL_PFC_SH7722 if CPU_SUBTYPE_SH7722 > + select PINCTRL_PFC_SH7723 if CPU_SUBTYPE_SH7723 > + select PINCTRL_PFC_SH7724 if CPU_SUBTYPE_SH7724 > + select PINCTRL_PFC_SH7734 if CPU_SUBTYPE_SH7734 > + select PINCTRL_PFC_SH7757 if CPU_SUBTYPE_SH7757 > + select PINCTRL_PFC_SH7785 if CPU_SUBTYPE_SH7785 > + select PINCTRL_PFC_SH7786 if CPU_SUBTYPE_SH7786 > + select PINCTRL_PFC_SHX3 if CPU_SUBTYPE_SHX3 > help > - This enables pin control drivers for SH and SH Mobile platforms > + This enables pin control drivers for Renesas SuperH and ARM platforms > > config PINCTRL_SH_PFC_GPIO > select GPIOLIB > - select PINCTRL_SH_PFC > bool > help > This enables pin control and GPIO drivers for SH/SH Mobile platforms > @@ -27,183 +61,125 @@ config PINCTRL_SH_FUNC_GPIO > This enables legacy function GPIOs for SH platforms > > config PINCTRL_PFC_EMEV2 > - def_bool y > - depends on ARCH_EMEV2 > - select PINCTRL_SH_PFC > + bool "Emma Mobile AV2 pin control support" if COMPILE_TEST > > config PINCTRL_PFC_R8A73A4 > - def_bool y > - depends on ARCH_R8A73A4 > + bool "R-Mobile APE6 pin control support" if COMPILE_TEST > select PINCTRL_SH_PFC_GPIO > > config PINCTRL_PFC_R8A7740 > - def_bool y > - depends on ARCH_R8A7740 > + bool "R-Mobile A1 pin control support" if COMPILE_TEST > select PINCTRL_SH_PFC_GPIO > > config PINCTRL_PFC_R8A7743 > - def_bool y > - depends on ARCH_R8A7743 > - select PINCTRL_SH_PFC > + bool "RZ/G1M pin control support" if COMPILE_TEST > > config PINCTRL_PFC_R8A7744 > - def_bool y > - depends on ARCH_R8A7744 > - select PINCTRL_SH_PFC > + bool "RZ/G1N pin control support" if COMPILE_TEST > > config PINCTRL_PFC_R8A7745 > - def_bool y > - depends on ARCH_R8A7745 > - select PINCTRL_SH_PFC > + bool "RZ/G1E pin control support" if COMPILE_TEST > > config PINCTRL_PFC_R8A77470 > - def_bool y > - depends on ARCH_R8A77470 > - select PINCTRL_SH_PFC > + bool "RZ/G1C pin control support" if COMPILE_TEST > > config PINCTRL_PFC_R8A774A1 > - def_bool y > - depends on ARCH_R8A774A1 > - select PINCTRL_SH_PFC > + bool "RZ/G2M pin control support" if COMPILE_TEST > > config PINCTRL_PFC_R8A774C0 > - def_bool y > - depends on ARCH_R8A774C0 > - select PINCTRL_SH_PFC > + bool "RZ/G2E pin control support" if COMPILE_TEST > > config PINCTRL_PFC_R8A7778 > - def_bool y > - depends on ARCH_R8A7778 > - select PINCTRL_SH_PFC > + bool "R-Car M1A pin control support" if COMPILE_TEST > > config PINCTRL_PFC_R8A7779 > - def_bool y > - depends on ARCH_R8A7779 > - select PINCTRL_SH_PFC > + bool "R-Car H1 pin control support" if COMPILE_TEST > > config PINCTRL_PFC_R8A7790 > - def_bool y > - depends on ARCH_R8A7790 > - select PINCTRL_SH_PFC > + bool "R-Car H2 pin control support" if COMPILE_TEST > > config PINCTRL_PFC_R8A7791 > - def_bool y > - depends on ARCH_R8A7791 > - select PINCTRL_SH_PFC > + bool "R-Car M2-W pin control support" if COMPILE_TEST > > config PINCTRL_PFC_R8A7792 > - def_bool y > - depends on ARCH_R8A7792 > - select PINCTRL_SH_PFC > + bool "R-Car V2H pin control support" if COMPILE_TEST > > config PINCTRL_PFC_R8A7793 > - def_bool y > - depends on ARCH_R8A7793 > - select PINCTRL_SH_PFC > + bool "R-Car M2-N pin control support" if COMPILE_TEST > > config PINCTRL_PFC_R8A7794 > - def_bool y > - depends on ARCH_R8A7794 > - select PINCTRL_SH_PFC > + bool "R-Car E2 pin control support" if COMPILE_TEST > > config PINCTRL_PFC_R8A7795 > - def_bool y > - depends on ARCH_R8A7795 > - select PINCTRL_SH_PFC > + bool "R-Car H3 pin control support" if COMPILE_TEST > > config PINCTRL_PFC_R8A7796 > - def_bool y > - depends on ARCH_R8A7796 > - select PINCTRL_SH_PFC > + bool "R-Car M3-W pin control support" if COMPILE_TEST > > config PINCTRL_PFC_R8A77965 > - def_bool y > - depends on ARCH_R8A77965 > - select PINCTRL_SH_PFC > + bool "R-Car M3-N pin control support" if COMPILE_TEST > > config PINCTRL_PFC_R8A77970 > - def_bool y > - depends on ARCH_R8A77970 > - select PINCTRL_SH_PFC > + bool "R-Car V3M pin control support" if COMPILE_TEST > > config PINCTRL_PFC_R8A77980 > - def_bool y > - depends on ARCH_R8A77980 > - select PINCTRL_SH_PFC > + bool "R-Car V3H pin control support" if COMPILE_TEST > > config PINCTRL_PFC_R8A77990 > - def_bool y > - depends on ARCH_R8A77990 > - select PINCTRL_SH_PFC > + bool "R-Car E3 pin control support" if COMPILE_TEST > > config PINCTRL_PFC_R8A77995 > - def_bool y > - depends on ARCH_R8A77995 > - select PINCTRL_SH_PFC > + bool "R-Car D3 pin control support" if COMPILE_TEST > > config PINCTRL_PFC_SH7203 > - def_bool y > - depends on CPU_SUBTYPE_SH7203 > + bool "SH7203 pin control support" if COMPILE_TEST > select PINCTRL_SH_FUNC_GPIO > > config PINCTRL_PFC_SH7264 > - def_bool y > - depends on CPU_SUBTYPE_SH7264 > + bool "SH7264 pin control support" if COMPILE_TEST > select PINCTRL_SH_FUNC_GPIO > > config PINCTRL_PFC_SH7269 > - def_bool y > - depends on CPU_SUBTYPE_SH7269 > + bool "SH7269 pin control support" if COMPILE_TEST > select PINCTRL_SH_FUNC_GPIO > > config PINCTRL_PFC_SH73A0 > - def_bool y > - depends on ARCH_SH73A0 > + bool "SH-Mobile AG5 pin control support" if COMPILE_TEST > select PINCTRL_SH_PFC_GPIO > select REGULATOR > > config PINCTRL_PFC_SH7720 > - def_bool y > - depends on CPU_SUBTYPE_SH7720 > + bool "SH7720 pin control support" if COMPILE_TEST > select PINCTRL_SH_FUNC_GPIO > > config PINCTRL_PFC_SH7722 > - def_bool y > - depends on CPU_SUBTYPE_SH7722 > + bool "SH7722 pin control support" if COMPILE_TEST > select PINCTRL_SH_FUNC_GPIO > > config PINCTRL_PFC_SH7723 > - def_bool y > - depends on CPU_SUBTYPE_SH7723 > + bool "SH-Mobile R2 pin control support" if COMPILE_TEST > select PINCTRL_SH_FUNC_GPIO > > config PINCTRL_PFC_SH7724 > - def_bool y > - depends on CPU_SUBTYPE_SH7724 > + bool "SH-Mobile R2R pin control support" if COMPILE_TEST > select PINCTRL_SH_FUNC_GPIO > > config PINCTRL_PFC_SH7734 > - def_bool y > - depends on CPU_SUBTYPE_SH7734 > + bool "SH7734 pin control support" if COMPILE_TEST > select PINCTRL_SH_FUNC_GPIO > > config PINCTRL_PFC_SH7757 > - def_bool y > - depends on CPU_SUBTYPE_SH7757 > + bool "SH7757 pin control support" if COMPILE_TEST > select PINCTRL_SH_FUNC_GPIO > > config PINCTRL_PFC_SH7785 > - def_bool y > - depends on CPU_SUBTYPE_SH7785 > + bool "SH7785 pin control support" if COMPILE_TEST > select PINCTRL_SH_FUNC_GPIO > > config PINCTRL_PFC_SH7786 > - def_bool y > - depends on CPU_SUBTYPE_SH7786 > + bool "SH7786 pin control support" if COMPILE_TEST > select PINCTRL_SH_FUNC_GPIO > > config PINCTRL_PFC_SHX3 > - def_bool y > - depends on CPU_SUBTYPE_SHX3 > + bool "SH-X3 pin control support" if COMPILE_TEST > select PINCTRL_SH_FUNC_GPIO > -endif > diff --git a/drivers/pinctrl/sh-pfc/Makefile b/drivers/pinctrl/sh-pfc/Makefile > index 82ebb2a91ee0f998..8c95abcfcc006371 100644 > --- a/drivers/pinctrl/sh-pfc/Makefile > +++ b/drivers/pinctrl/sh-pfc/Makefile > @@ -38,3 +38,18 @@ obj-$(CONFIG_PINCTRL_PFC_SH7757) += pfc-sh7757.o > obj-$(CONFIG_PINCTRL_PFC_SH7785) += pfc-sh7785.o > obj-$(CONFIG_PINCTRL_PFC_SH7786) += pfc-sh7786.o > obj-$(CONFIG_PINCTRL_PFC_SHX3) += pfc-shx3.o > + > +ifeq ($(CONFIG_COMPILE_TEST),y) > +CFLAGS_pfc-sh7203.o += -I$(srctree)/arch/sh/include/cpu-sh2a > +CFLAGS_pfc-sh7264.o += -I$(srctree)/arch/sh/include/cpu-sh2a > +CFLAGS_pfc-sh7269.o += -I$(srctree)/arch/sh/include/cpu-sh2a > +CFLAGS_pfc-sh7720.o += -I$(srctree)/arch/sh/include/cpu-sh3 > +CFLAGS_pfc-sh7722.o += -I$(srctree)/arch/sh/include/cpu-sh4 > +CFLAGS_pfc-sh7723.o += -I$(srctree)/arch/sh/include/cpu-sh4 > +CFLAGS_pfc-sh7724.o += -I$(srctree)/arch/sh/include/cpu-sh4 > +CFLAGS_pfc-sh7734.o += -I$(srctree)/arch/sh/include/cpu-sh4 > +CFLAGS_pfc-sh7757.o += -I$(srctree)/arch/sh/include/cpu-sh4 > +CFLAGS_pfc-sh7785.o += -I$(srctree)/arch/sh/include/cpu-sh4 > +CFLAGS_pfc-sh7786.o += -I$(srctree)/arch/sh/include/cpu-sh4 > +CFLAGS_pfc-shx3.o += -I$(srctree)/arch/sh/include/cpu-sh4 > +endif > -- > 2.17.1 >
diff --git a/drivers/pinctrl/sh-pfc/Kconfig b/drivers/pinctrl/sh-pfc/Kconfig index 6a9e4334dbfa7ec0..2dd716b016a3f39b 100644 --- a/drivers/pinctrl/sh-pfc/Kconfig +++ b/drivers/pinctrl/sh-pfc/Kconfig @@ -3,19 +3,53 @@ # Renesas SH and SH Mobile PINCTRL drivers # -if ARCH_RENESAS || SUPERH - config PINCTRL_SH_PFC + bool "Renesas SoC pin control support" if COMPILE_TEST && !(ARCH_RENESAS || SUPERH) + default y if ARCH_RENESAS || SUPERH select PINMUX select PINCONF select GENERIC_PINCONF - def_bool y + select PINCTRL_PFC_EMEV2 if ARCH_EMEV2 + select PINCTRL_PFC_R8A73A4 if ARCH_R8A73A4 + select PINCTRL_PFC_R8A7740 if ARCH_R8A7740 + select PINCTRL_PFC_R8A7743 if ARCH_R8A7743 + select PINCTRL_PFC_R8A7744 if ARCH_R8A7744 + select PINCTRL_PFC_R8A7745 if ARCH_R8A7745 + select PINCTRL_PFC_R8A77470 if ARCH_R8A77470 + select PINCTRL_PFC_R8A774A1 if ARCH_R8A774A1 + select PINCTRL_PFC_R8A774C0 if ARCH_R8A774C0 + select PINCTRL_PFC_R8A7778 if ARCH_R8A7778 + select PINCTRL_PFC_R8A7779 if ARCH_R8A7779 + select PINCTRL_PFC_R8A7790 if ARCH_R8A7790 + select PINCTRL_PFC_R8A7791 if ARCH_R8A7791 + select PINCTRL_PFC_R8A7792 if ARCH_R8A7792 + select PINCTRL_PFC_R8A7793 if ARCH_R8A7793 + select PINCTRL_PFC_R8A7794 if ARCH_R8A7794 + select PINCTRL_PFC_R8A7795 if ARCH_R8A7795 + select PINCTRL_PFC_R8A7796 if ARCH_R8A7796 + select PINCTRL_PFC_R8A77965 if ARCH_R8A77965 + select PINCTRL_PFC_R8A77970 if ARCH_R8A77970 + select PINCTRL_PFC_R8A77980 if ARCH_R8A77980 + select PINCTRL_PFC_R8A77990 if ARCH_R8A77990 + select PINCTRL_PFC_R8A77995 if ARCH_R8A77995 + select PINCTRL_PFC_SH7203 if CPU_SUBTYPE_SH7203 + select PINCTRL_PFC_SH7264 if CPU_SUBTYPE_SH7264 + select PINCTRL_PFC_SH7269 if CPU_SUBTYPE_SH7269 + select PINCTRL_PFC_SH73A0 if ARCH_SH73A0 + select PINCTRL_PFC_SH7720 if CPU_SUBTYPE_SH7720 + select PINCTRL_PFC_SH7722 if CPU_SUBTYPE_SH7722 + select PINCTRL_PFC_SH7723 if CPU_SUBTYPE_SH7723 + select PINCTRL_PFC_SH7724 if CPU_SUBTYPE_SH7724 + select PINCTRL_PFC_SH7734 if CPU_SUBTYPE_SH7734 + select PINCTRL_PFC_SH7757 if CPU_SUBTYPE_SH7757 + select PINCTRL_PFC_SH7785 if CPU_SUBTYPE_SH7785 + select PINCTRL_PFC_SH7786 if CPU_SUBTYPE_SH7786 + select PINCTRL_PFC_SHX3 if CPU_SUBTYPE_SHX3 help - This enables pin control drivers for SH and SH Mobile platforms + This enables pin control drivers for Renesas SuperH and ARM platforms config PINCTRL_SH_PFC_GPIO select GPIOLIB - select PINCTRL_SH_PFC bool help This enables pin control and GPIO drivers for SH/SH Mobile platforms @@ -27,183 +61,125 @@ config PINCTRL_SH_FUNC_GPIO This enables legacy function GPIOs for SH platforms config PINCTRL_PFC_EMEV2 - def_bool y - depends on ARCH_EMEV2 - select PINCTRL_SH_PFC + bool "Emma Mobile AV2 pin control support" if COMPILE_TEST config PINCTRL_PFC_R8A73A4 - def_bool y - depends on ARCH_R8A73A4 + bool "R-Mobile APE6 pin control support" if COMPILE_TEST select PINCTRL_SH_PFC_GPIO config PINCTRL_PFC_R8A7740 - def_bool y - depends on ARCH_R8A7740 + bool "R-Mobile A1 pin control support" if COMPILE_TEST select PINCTRL_SH_PFC_GPIO config PINCTRL_PFC_R8A7743 - def_bool y - depends on ARCH_R8A7743 - select PINCTRL_SH_PFC + bool "RZ/G1M pin control support" if COMPILE_TEST config PINCTRL_PFC_R8A7744 - def_bool y - depends on ARCH_R8A7744 - select PINCTRL_SH_PFC + bool "RZ/G1N pin control support" if COMPILE_TEST config PINCTRL_PFC_R8A7745 - def_bool y - depends on ARCH_R8A7745 - select PINCTRL_SH_PFC + bool "RZ/G1E pin control support" if COMPILE_TEST config PINCTRL_PFC_R8A77470 - def_bool y - depends on ARCH_R8A77470 - select PINCTRL_SH_PFC + bool "RZ/G1C pin control support" if COMPILE_TEST config PINCTRL_PFC_R8A774A1 - def_bool y - depends on ARCH_R8A774A1 - select PINCTRL_SH_PFC + bool "RZ/G2M pin control support" if COMPILE_TEST config PINCTRL_PFC_R8A774C0 - def_bool y - depends on ARCH_R8A774C0 - select PINCTRL_SH_PFC + bool "RZ/G2E pin control support" if COMPILE_TEST config PINCTRL_PFC_R8A7778 - def_bool y - depends on ARCH_R8A7778 - select PINCTRL_SH_PFC + bool "R-Car M1A pin control support" if COMPILE_TEST config PINCTRL_PFC_R8A7779 - def_bool y - depends on ARCH_R8A7779 - select PINCTRL_SH_PFC + bool "R-Car H1 pin control support" if COMPILE_TEST config PINCTRL_PFC_R8A7790 - def_bool y - depends on ARCH_R8A7790 - select PINCTRL_SH_PFC + bool "R-Car H2 pin control support" if COMPILE_TEST config PINCTRL_PFC_R8A7791 - def_bool y - depends on ARCH_R8A7791 - select PINCTRL_SH_PFC + bool "R-Car M2-W pin control support" if COMPILE_TEST config PINCTRL_PFC_R8A7792 - def_bool y - depends on ARCH_R8A7792 - select PINCTRL_SH_PFC + bool "R-Car V2H pin control support" if COMPILE_TEST config PINCTRL_PFC_R8A7793 - def_bool y - depends on ARCH_R8A7793 - select PINCTRL_SH_PFC + bool "R-Car M2-N pin control support" if COMPILE_TEST config PINCTRL_PFC_R8A7794 - def_bool y - depends on ARCH_R8A7794 - select PINCTRL_SH_PFC + bool "R-Car E2 pin control support" if COMPILE_TEST config PINCTRL_PFC_R8A7795 - def_bool y - depends on ARCH_R8A7795 - select PINCTRL_SH_PFC + bool "R-Car H3 pin control support" if COMPILE_TEST config PINCTRL_PFC_R8A7796 - def_bool y - depends on ARCH_R8A7796 - select PINCTRL_SH_PFC + bool "R-Car M3-W pin control support" if COMPILE_TEST config PINCTRL_PFC_R8A77965 - def_bool y - depends on ARCH_R8A77965 - select PINCTRL_SH_PFC + bool "R-Car M3-N pin control support" if COMPILE_TEST config PINCTRL_PFC_R8A77970 - def_bool y - depends on ARCH_R8A77970 - select PINCTRL_SH_PFC + bool "R-Car V3M pin control support" if COMPILE_TEST config PINCTRL_PFC_R8A77980 - def_bool y - depends on ARCH_R8A77980 - select PINCTRL_SH_PFC + bool "R-Car V3H pin control support" if COMPILE_TEST config PINCTRL_PFC_R8A77990 - def_bool y - depends on ARCH_R8A77990 - select PINCTRL_SH_PFC + bool "R-Car E3 pin control support" if COMPILE_TEST config PINCTRL_PFC_R8A77995 - def_bool y - depends on ARCH_R8A77995 - select PINCTRL_SH_PFC + bool "R-Car D3 pin control support" if COMPILE_TEST config PINCTRL_PFC_SH7203 - def_bool y - depends on CPU_SUBTYPE_SH7203 + bool "SH7203 pin control support" if COMPILE_TEST select PINCTRL_SH_FUNC_GPIO config PINCTRL_PFC_SH7264 - def_bool y - depends on CPU_SUBTYPE_SH7264 + bool "SH7264 pin control support" if COMPILE_TEST select PINCTRL_SH_FUNC_GPIO config PINCTRL_PFC_SH7269 - def_bool y - depends on CPU_SUBTYPE_SH7269 + bool "SH7269 pin control support" if COMPILE_TEST select PINCTRL_SH_FUNC_GPIO config PINCTRL_PFC_SH73A0 - def_bool y - depends on ARCH_SH73A0 + bool "SH-Mobile AG5 pin control support" if COMPILE_TEST select PINCTRL_SH_PFC_GPIO select REGULATOR config PINCTRL_PFC_SH7720 - def_bool y - depends on CPU_SUBTYPE_SH7720 + bool "SH7720 pin control support" if COMPILE_TEST select PINCTRL_SH_FUNC_GPIO config PINCTRL_PFC_SH7722 - def_bool y - depends on CPU_SUBTYPE_SH7722 + bool "SH7722 pin control support" if COMPILE_TEST select PINCTRL_SH_FUNC_GPIO config PINCTRL_PFC_SH7723 - def_bool y - depends on CPU_SUBTYPE_SH7723 + bool "SH-Mobile R2 pin control support" if COMPILE_TEST select PINCTRL_SH_FUNC_GPIO config PINCTRL_PFC_SH7724 - def_bool y - depends on CPU_SUBTYPE_SH7724 + bool "SH-Mobile R2R pin control support" if COMPILE_TEST select PINCTRL_SH_FUNC_GPIO config PINCTRL_PFC_SH7734 - def_bool y - depends on CPU_SUBTYPE_SH7734 + bool "SH7734 pin control support" if COMPILE_TEST select PINCTRL_SH_FUNC_GPIO config PINCTRL_PFC_SH7757 - def_bool y - depends on CPU_SUBTYPE_SH7757 + bool "SH7757 pin control support" if COMPILE_TEST select PINCTRL_SH_FUNC_GPIO config PINCTRL_PFC_SH7785 - def_bool y - depends on CPU_SUBTYPE_SH7785 + bool "SH7785 pin control support" if COMPILE_TEST select PINCTRL_SH_FUNC_GPIO config PINCTRL_PFC_SH7786 - def_bool y - depends on CPU_SUBTYPE_SH7786 + bool "SH7786 pin control support" if COMPILE_TEST select PINCTRL_SH_FUNC_GPIO config PINCTRL_PFC_SHX3 - def_bool y - depends on CPU_SUBTYPE_SHX3 + bool "SH-X3 pin control support" if COMPILE_TEST select PINCTRL_SH_FUNC_GPIO -endif diff --git a/drivers/pinctrl/sh-pfc/Makefile b/drivers/pinctrl/sh-pfc/Makefile index 82ebb2a91ee0f998..8c95abcfcc006371 100644 --- a/drivers/pinctrl/sh-pfc/Makefile +++ b/drivers/pinctrl/sh-pfc/Makefile @@ -38,3 +38,18 @@ obj-$(CONFIG_PINCTRL_PFC_SH7757) += pfc-sh7757.o obj-$(CONFIG_PINCTRL_PFC_SH7785) += pfc-sh7785.o obj-$(CONFIG_PINCTRL_PFC_SH7786) += pfc-sh7786.o obj-$(CONFIG_PINCTRL_PFC_SHX3) += pfc-shx3.o + +ifeq ($(CONFIG_COMPILE_TEST),y) +CFLAGS_pfc-sh7203.o += -I$(srctree)/arch/sh/include/cpu-sh2a +CFLAGS_pfc-sh7264.o += -I$(srctree)/arch/sh/include/cpu-sh2a +CFLAGS_pfc-sh7269.o += -I$(srctree)/arch/sh/include/cpu-sh2a +CFLAGS_pfc-sh7720.o += -I$(srctree)/arch/sh/include/cpu-sh3 +CFLAGS_pfc-sh7722.o += -I$(srctree)/arch/sh/include/cpu-sh4 +CFLAGS_pfc-sh7723.o += -I$(srctree)/arch/sh/include/cpu-sh4 +CFLAGS_pfc-sh7724.o += -I$(srctree)/arch/sh/include/cpu-sh4 +CFLAGS_pfc-sh7734.o += -I$(srctree)/arch/sh/include/cpu-sh4 +CFLAGS_pfc-sh7757.o += -I$(srctree)/arch/sh/include/cpu-sh4 +CFLAGS_pfc-sh7785.o += -I$(srctree)/arch/sh/include/cpu-sh4 +CFLAGS_pfc-sh7786.o += -I$(srctree)/arch/sh/include/cpu-sh4 +CFLAGS_pfc-shx3.o += -I$(srctree)/arch/sh/include/cpu-sh4 +endif
Enable compile-testing of all Renesas SuperH and ARM pin control drivers, in a similar way as was done before for clock and SoC drivers in commits 371dd373c6edd557 ("clk: renesas: Allow compile-testing of all (sub)drivers") and 8be381a131c29c47 ("soc: renesas: Rework Kconfig and Makefile logic"). The SuperH pin control drivers need specific include files, hence make sure they are always found when compile-testing. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- v3: - No changes, v2: - Add proper COMPILE_TEST support, instead of just enabling all drivers unconditionally, - Drop RFC state. --- drivers/pinctrl/sh-pfc/Kconfig | 174 ++++++++++++++------------------ drivers/pinctrl/sh-pfc/Makefile | 15 +++ 2 files changed, 90 insertions(+), 99 deletions(-)