@@ -246,109 +246,38 @@ unsigned long long poke_real_address_q(unsigned long long addr,
#define phys_to_virt(address) (__va(address))
#endif
-/*
- * On 32-bit SH, we traditionally have the whole physical address space
- * mapped at all times (as MIPS does), so "ioremap()" and "iounmap()" do
- * not need to do anything but place the address in the proper segment.
- * This is true for P1 and P2 addresses, as well as some P3 ones.
- * However, most of the P3 addresses and newer cores using extended
- * addressing need to map through page tables, so the ioremap()
- * implementation becomes a bit more complicated.
- *
- * See arch/sh/mm/ioremap.c for additional notes on this.
- *
- * We cheat a bit and always return uncachable areas until we've fixed
- * the drivers to handle caching properly.
- *
- * On the SH-5 the concept of segmentation in the 1:1 PXSEG sense simply
- * doesn't exist, so everything must go through page tables.
- */
#ifdef CONFIG_MMU
+void iounmap(void __iomem *addr);
void __iomem *__ioremap_caller(phys_addr_t offset, unsigned long size,
pgprot_t prot, void *caller);
-void iounmap(void __iomem *addr);
-
-static inline void __iomem *
-__ioremap(phys_addr_t offset, unsigned long size, pgprot_t prot)
-{
- return __ioremap_caller(offset, size, prot, __builtin_return_address(0));
-}
-
-static inline void __iomem *
-__ioremap_29bit(phys_addr_t offset, unsigned long size, pgprot_t prot)
-{
-#ifdef CONFIG_29BIT
- phys_addr_t last_addr = offset + size - 1;
-
- /*
- * For P1 and P2 space this is trivial, as everything is already
- * mapped. Uncached access for P1 addresses are done through P2.
- * In the P3 case or for addresses outside of the 29-bit space,
- * mapping must be done by the PMB or by using page tables.
- */
- if (likely(PXSEG(offset) < P3SEG && PXSEG(last_addr) < P3SEG)) {
- u64 flags = pgprot_val(prot);
-
- /*
- * Anything using the legacy PTEA space attributes needs
- * to be kicked down to page table mappings.
- */
- if (unlikely(flags & _PAGE_PCC_MASK))
- return NULL;
- if (unlikely(flags & _PAGE_CACHABLE))
- return (void __iomem *)P1SEGADDR(offset);
-
- return (void __iomem *)P2SEGADDR(offset);
- }
-
- /* P4 above the store queues are always mapped. */
- if (unlikely(offset >= P3_ADDR_MAX))
- return (void __iomem *)P4SEGADDR(offset);
-#endif
-
- return NULL;
-}
-
-static inline void __iomem *
-__ioremap_mode(phys_addr_t offset, unsigned long size, pgprot_t prot)
-{
- void __iomem *ret;
-
- ret = __ioremap_trapped(offset, size);
- if (ret)
- return ret;
-
- ret = __ioremap_29bit(offset, size, prot);
- if (ret)
- return ret;
-
- return __ioremap(offset, size, prot);
-}
-#else
-#define __ioremap(offset, size, prot) ((void __iomem *)(offset))
-#define __ioremap_mode(offset, size, prot) ((void __iomem *)(offset))
-#define iounmap(addr) do { } while (0)
-#endif /* CONFIG_MMU */
static inline void __iomem *ioremap(phys_addr_t offset, unsigned long size)
{
- return __ioremap_mode(offset, size, PAGE_KERNEL_NOCACHE);
+ return __ioremap_caller(offset, size, PAGE_KERNEL_NOCACHE,
+ __builtin_return_address(0));
}
static inline void __iomem *
ioremap_cache(phys_addr_t offset, unsigned long size)
{
- return __ioremap_mode(offset, size, PAGE_KERNEL);
+ return __ioremap_caller(offset, size, PAGE_KERNEL,
+ __builtin_return_address(0));
}
#define ioremap_cache ioremap_cache
#ifdef CONFIG_HAVE_IOREMAP_PROT
-static inline void __iomem *
-ioremap_prot(phys_addr_t offset, unsigned long size, unsigned long flags)
+static inline void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
+ unsigned long flags)
{
- return __ioremap_mode(offset, size, __pgprot(flags));
+ return __ioremap_caller(offset, size, __pgprot(flags),
+ __builtin_return_address(0));
}
-#endif
+#endif /* CONFIG_HAVE_IOREMAP_PROT */
+
+#else /* CONFIG_MMU */
+#define iounmap(addr) do { } while (0)
+#define ioremap(offset, size) ((void __iomem *)(unsigned long)(offset))
+#endif /* CONFIG_MMU */
#define ioremap_uc ioremap
@@ -26,6 +26,55 @@
#include <asm/mmu.h>
#include "ioremap.h"
+/*
+ * On 32-bit SH, we traditionally have the whole physical address space mapped
+ * at all times (as MIPS does), so "ioremap()" and "iounmap()" do not need to do
+ * anything but place the address in the proper segment. This is true for P1
+ * and P2 addresses, as well as some P3 ones. However, most of the P3 addresses
+ * and newer cores using extended addressing need to map through page tables, so
+ * the ioremap() implementation becomes a bit more complicated.
+ *
+ * On the SH-5 the concept of segmentation in the 1:1 PXSEG sense simply doesn't
+ * exist, so everything must go through page tables.
+ */
+
+#ifdef CONFIG_29BIT
+static void __iomem *
+__ioremap_29bit(phys_addr_t offset, unsigned long size, pgprot_t prot)
+{
+ phys_addr_t last_addr = offset + size - 1;
+
+ /*
+ * For P1 and P2 space this is trivial, as everything is already
+ * mapped. Uncached access for P1 addresses are done through P2.
+ * In the P3 case or for addresses outside of the 29-bit space,
+ * mapping must be done by the PMB or by using page tables.
+ */
+ if (likely(PXSEG(offset) < P3SEG && PXSEG(last_addr) < P3SEG)) {
+ u64 flags = pgprot_val(prot);
+
+ /*
+ * Anything using the legacy PTEA space attributes needs
+ * to be kicked down to page table mappings.
+ */
+ if (unlikely(flags & _PAGE_PCC_MASK))
+ return NULL;
+ if (unlikely(flags & _PAGE_CACHABLE))
+ return (void __iomem *)P1SEGADDR(offset);
+
+ return (void __iomem *)P2SEGADDR(offset);
+ }
+
+ /* P4 above the store queues are always mapped. */
+ if (unlikely(offset >= P3_ADDR_MAX))
+ return (void __iomem *)P4SEGADDR(offset);
+
+ return NULL;
+}
+#else
+#define __ioremap_29bit(offset, size, prot) NULL
+#endif /* CONFIG_29BIT */
+
/*
* Remap an arbitrary physical address space into the kernel virtual
* address space. Needed when the kernel wants to access high addresses
@@ -43,6 +92,14 @@ __ioremap_caller(phys_addr_t phys_addr, unsigned long size,
unsigned long offset, last_addr, addr, orig_addr;
void __iomem *mapped;
+ mapped = __ioremap_trapped(phys_addr, size);
+ if (mapped)
+ return mapped;
+
+ mapped = __ioremap_29bit(phys_addr, size, pgprot);
+ if (mapped)
+ return mapped;
+
/* Don't allow wraparound or zero size */
last_addr = phys_addr + size - 1;
if (!size || last_addr < phys_addr)
Move the internal implementation details of ioremap out of line, no need to expose any of this to drivers for a slow path API. Signed-off-by: Christoph Hellwig <hch@lst.de> --- arch/sh/include/asm/io.h | 101 ++++++--------------------------------- arch/sh/mm/ioremap.c | 57 ++++++++++++++++++++++ 2 files changed, 72 insertions(+), 86 deletions(-)