From patchwork Wed Mar 25 09:57:21 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Geert Uytterhoeven X-Patchwork-Id: 11457359 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id ACF9814B4 for ; Wed, 25 Mar 2020 09:57:33 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 7493820772 for ; Wed, 25 Mar 2020 09:57:33 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727158AbgCYJ5d (ORCPT ); Wed, 25 Mar 2020 05:57:33 -0400 Received: from baptiste.telenet-ops.be ([195.130.132.51]:56402 "EHLO baptiste.telenet-ops.be" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726239AbgCYJ5c (ORCPT ); Wed, 25 Mar 2020 05:57:32 -0400 Received: from ramsan ([84.195.182.253]) by baptiste.telenet-ops.be with bizsmtp id JZxS220015USYZQ01ZxScQ; Wed, 25 Mar 2020 10:57:28 +0100 Received: from rox.of.borg ([192.168.97.57]) by ramsan with esmtp (Exim 4.90_1) (envelope-from ) id 1jH2mr-0002yM-T9; Wed, 25 Mar 2020 10:57:25 +0100 Received: from geert by rox.of.borg with local (Exim 4.90_1) (envelope-from ) id 1jH2mr-00037V-PX; Wed, 25 Mar 2020 10:57:25 +0100 From: Geert Uytterhoeven To: Rob Herring , Greg Kroah-Hartman Cc: Ulrich Hecht , Chris Brandt , Yoshinori Sato , Rich Felker , linux-serial@vger.kernel.org, devicetree@vger.kernel.org, linux-renesas-soc@vger.kernel.org, linux-sh@vger.kernel.org, uclinux-h8-devel@lists.sourceforge.jp, Geert Uytterhoeven Subject: [PATCH v2] dt-bindings: serial: sh-sci: Convert to json-schema Date: Wed, 25 Mar 2020 10:57:21 +0100 Message-Id: <20200325095721.11946-1-geert+renesas@glider.be> X-Mailer: git-send-email 2.17.1 Sender: linux-sh-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-sh@vger.kernel.org Convert the Renesas Serial Communication Interface ((H)SCI(F)(A|B)) Device Tree binding documentation to json-schema. Split the bindings in 5 files, one per major type, to ease expressing constraints. Signed-off-by: Geert Uytterhoeven --- v2: - Drop paragraph about aliases, - Fix power-domains and resets to maxItems 1, - Use a single const compatible value for SCI, - Use lists of descriptions and const values for interrupts resp. interrupt-names for SCI and SCIF, - Use multiple possible lists of descriptions and const values for interrupts resp. interrupt-names for SCIF. --- .../bindings/serial/renesas,hscif.yaml | 135 ++++++++++++++ .../bindings/serial/renesas,sci-serial.txt | 150 --------------- .../bindings/serial/renesas,sci.yaml | 69 +++++++ .../bindings/serial/renesas,scif.yaml | 172 ++++++++++++++++++ .../bindings/serial/renesas,scifa.yaml | 107 +++++++++++ .../bindings/serial/renesas,scifb.yaml | 98 ++++++++++ 6 files changed, 581 insertions(+), 150 deletions(-) create mode 100644 Documentation/devicetree/bindings/serial/renesas,hscif.yaml delete mode 100644 Documentation/devicetree/bindings/serial/renesas,sci-serial.txt create mode 100644 Documentation/devicetree/bindings/serial/renesas,sci.yaml create mode 100644 Documentation/devicetree/bindings/serial/renesas,scif.yaml create mode 100644 Documentation/devicetree/bindings/serial/renesas,scifa.yaml create mode 100644 Documentation/devicetree/bindings/serial/renesas,scifb.yaml diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml new file mode 100644 index 0000000000000000..91101521ef078c19 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/serial/renesas,hscif.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas High Speed Serial Communication Interface with FIFO (HSCIF) + +maintainers: + - Geert Uytterhoeven + +allOf: + - $ref: serial.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,hscif-r8a7778 # R-Car M1 + - renesas,hscif-r8a7779 # R-Car H1 + - const: renesas,rcar-gen1-hscif # R-Car Gen1 + - const: renesas,hscif # generic HSCIF compatible UART + + - items: + - enum: + - renesas,hscif-r8a7743 # RZ/G1M + - renesas,hscif-r8a7744 # RZ/G1N + - renesas,hscif-r8a7745 # RZ/G1E + - renesas,hscif-r8a77470 # RZ/G1C + - renesas,hscif-r8a7790 # R-Car H2 + - renesas,hscif-r8a7791 # R-Car M2-W + - renesas,hscif-r8a7792 # R-Car V2H + - renesas,hscif-r8a7793 # R-Car M2-N + - renesas,hscif-r8a7794 # R-Car E2 + - const: renesas,rcar-gen2-hscif # R-Car Gen2 and RZ/G1 + - const: renesas,hscif # generic HSCIF compatible UART + + - items: + - enum: + - renesas,hscif-r8a774a1 # RZ/G2M + - renesas,hscif-r8a774b1 # RZ/G2N + - renesas,hscif-r8a774c0 # RZ/G2E + - renesas,hscif-r8a7795 # R-Car H3 + - renesas,hscif-r8a7796 # R-Car M3-W + - renesas,hscif-r8a77961 # R-Car M3-W+ + - renesas,hscif-r8a77965 # R-Car M3-N + - renesas,hscif-r8a77970 # R-Car V3M + - renesas,hscif-r8a77980 # R-Car V3H + - renesas,hscif-r8a77990 # R-Car E3 + - renesas,hscif-r8a77995 # R-Car D3 + - const: renesas,rcar-gen3-hscif # R-Car Gen3 and RZ/G2 + - const: renesas,hscif # generic HSCIF compatible UART + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + items: + enum: + - fck # UART functional clock + - hsck # optional external clock input + - brg_int # optional internal clock source for BRG frequency divider + - scif_clk # optional external clock source for BRG frequency divider + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + description: + Must contain a list of pairs of references to DMA specifiers, one for + transmission, and one for reception. + + dma-names: + minItems: 2 + maxItems: 4 + items: + enum: + - tx + - rx + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + +if: + properties: + compatible: + contains: + enum: + - renesas,rcar-gen2-hscif + - renesas,rcar-gen3-hscif +then: + required: + - resets + +examples: + - | + #include + #include + #include + aliases { + serial1 = &hscif1; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a7795", "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0xe6550000 96>; + interrupts = ; + clocks = <&cpg CPG_MOD 519>, <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 519>; + uart-has-rtscts; + }; diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt deleted file mode 100644 index 5816e7d739f618e4..0000000000000000 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ /dev/null @@ -1,150 +0,0 @@ -* Renesas SH-Mobile Serial Communication Interface - -Required properties: - - - compatible: Must contain one or more of the following: - - - "renesas,scif-r7s72100" for R7S72100 (RZ/A1H) SCIF compatible UART. - - "renesas,scif-r7s9210" for R7S9210 (RZ/A2) SCIF compatible UART. - - "renesas,scifa-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFA compatible UART. - - "renesas,scifb-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFB compatible UART. - - "renesas,scifa-r8a7740" for R8A7740 (R-Mobile A1) SCIFA compatible UART. - - "renesas,scifb-r8a7740" for R8A7740 (R-Mobile A1) SCIFB compatible UART. - - "renesas,scif-r8a7743" for R8A7743 (RZ/G1M) SCIF compatible UART. - - "renesas,scifa-r8a7743" for R8A7743 (RZ/G1M) SCIFA compatible UART. - - "renesas,scifb-r8a7743" for R8A7743 (RZ/G1M) SCIFB compatible UART. - - "renesas,hscif-r8a7743" for R8A7743 (RZ/G1M) HSCIF compatible UART. - - "renesas,scif-r8a7744" for R8A7744 (RZ/G1N) SCIF compatible UART. - - "renesas,scifa-r8a7744" for R8A7744 (RZ/G1N) SCIFA compatible UART. - - "renesas,scifb-r8a7744" for R8A7744 (RZ/G1N) SCIFB compatible UART. - - "renesas,hscif-r8a7744" for R8A7744 (RZ/G1N) HSCIF compatible UART. - - "renesas,scif-r8a7745" for R8A7745 (RZ/G1E) SCIF compatible UART. - - "renesas,scifa-r8a7745" for R8A7745 (RZ/G1E) SCIFA compatible UART. - - "renesas,scifb-r8a7745" for R8A7745 (RZ/G1E) SCIFB compatible UART. - - "renesas,hscif-r8a7745" for R8A7745 (RZ/G1E) HSCIF compatible UART. - - "renesas,scif-r8a77470" for R8A77470 (RZ/G1C) SCIF compatible UART. - - "renesas,hscif-r8a77470" for R8A77470 (RZ/G1C) HSCIF compatible UART. - - "renesas,scif-r8a774a1" for R8A774A1 (RZ/G2M) SCIF compatible UART. - - "renesas,hscif-r8a774a1" for R8A774A1 (RZ/G2M) HSCIF compatible UART. - - "renesas,scif-r8a774b1" for R8A774B1 (RZ/G2N) SCIF compatible UART. - - "renesas,hscif-r8a774b1" for R8A774B1 (RZ/G2N) HSCIF compatible UART. - - "renesas,scif-r8a774c0" for R8A774C0 (RZ/G2E) SCIF compatible UART. - - "renesas,hscif-r8a774c0" for R8A774C0 (RZ/G2E) HSCIF compatible UART. - - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART. - - "renesas,hscif-r8a7778" for R8A7778 (R-Car M1) HSCIF compatible UART. - - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART. - - "renesas,hscif-r8a7779" for R8A7779 (R-Car H1) HSCIF compatible UART. - - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART. - - "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART. - - "renesas,scifb-r8a7790" for R8A7790 (R-Car H2) SCIFB compatible UART. - - "renesas,hscif-r8a7790" for R8A7790 (R-Car H2) HSCIF compatible UART. - - "renesas,scif-r8a7791" for R8A7791 (R-Car M2-W) SCIF compatible UART. - - "renesas,scifa-r8a7791" for R8A7791 (R-Car M2-W) SCIFA compatible UART. - - "renesas,scifb-r8a7791" for R8A7791 (R-Car M2-W) SCIFB compatible UART. - - "renesas,hscif-r8a7791" for R8A7791 (R-Car M2-W) HSCIF compatible UART. - - "renesas,scif-r8a7792" for R8A7792 (R-Car V2H) SCIF compatible UART. - - "renesas,hscif-r8a7792" for R8A7792 (R-Car V2H) HSCIF compatible UART. - - "renesas,scif-r8a7793" for R8A7793 (R-Car M2-N) SCIF compatible UART. - - "renesas,scifa-r8a7793" for R8A7793 (R-Car M2-N) SCIFA compatible UART. - - "renesas,scifb-r8a7793" for R8A7793 (R-Car M2-N) SCIFB compatible UART. - - "renesas,hscif-r8a7793" for R8A7793 (R-Car M2-N) HSCIF compatible UART. - - "renesas,scif-r8a7794" for R8A7794 (R-Car E2) SCIF compatible UART. - - "renesas,scifa-r8a7794" for R8A7794 (R-Car E2) SCIFA compatible UART. - - "renesas,scifb-r8a7794" for R8A7794 (R-Car E2) SCIFB compatible UART. - - "renesas,hscif-r8a7794" for R8A7794 (R-Car E2) HSCIF compatible UART. - - "renesas,scif-r8a7795" for R8A7795 (R-Car H3) SCIF compatible UART. - - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART. - - "renesas,scif-r8a7796" for R8A77960 (R-Car M3-W) SCIF compatible UART. - - "renesas,hscif-r8a7796" for R8A77960 (R-Car M3-W) HSCIF compatible UART. - - "renesas,scif-r8a77961" for R8A77961 (R-Car M3-W+) SCIF compatible UART. - - "renesas,hscif-r8a77961" for R8A77961 (R-Car M3-W+) HSCIF compatible UART. - - "renesas,scif-r8a77965" for R8A77965 (R-Car M3-N) SCIF compatible UART. - - "renesas,hscif-r8a77965" for R8A77965 (R-Car M3-N) HSCIF compatible UART. - - "renesas,scif-r8a77970" for R8A77970 (R-Car V3M) SCIF compatible UART. - - "renesas,hscif-r8a77970" for R8A77970 (R-Car V3M) HSCIF compatible UART. - - "renesas,scif-r8a77980" for R8A77980 (R-Car V3H) SCIF compatible UART. - - "renesas,hscif-r8a77980" for R8A77980 (R-Car V3H) HSCIF compatible UART. - - "renesas,scif-r8a77990" for R8A77990 (R-Car E3) SCIF compatible UART. - - "renesas,hscif-r8a77990" for R8A77990 (R-Car E3) HSCIF compatible UART. - - "renesas,scif-r8a77995" for R8A77995 (R-Car D3) SCIF compatible UART. - - "renesas,hscif-r8a77995" for R8A77995 (R-Car D3) HSCIF compatible UART. - - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART. - - "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART. - - "renesas,rcar-gen1-scif" for R-Car Gen1 SCIF compatible UART, - - "renesas,rcar-gen2-scif" for R-Car Gen2 and RZ/G1 SCIF compatible UART, - - "renesas,rcar-gen3-scif" for R-Car Gen3 and RZ/G2 SCIF compatible UART, - - "renesas,rcar-gen2-scifa" for R-Car Gen2 and RZ/G1 SCIFA compatible UART, - - "renesas,rcar-gen2-scifb" for R-Car Gen2 and RZ/G1 SCIFB compatible UART, - - "renesas,rcar-gen1-hscif" for R-Car Gen1 HSCIF compatible UART, - - "renesas,rcar-gen2-hscif" for R-Car Gen2 and RZ/G1 HSCIF compatible UART, - - "renesas,rcar-gen3-hscif" for R-Car Gen3 and RZ/G2 HSCIF compatible UART, - - "renesas,scif" for generic SCIF compatible UART. - - "renesas,scifa" for generic SCIFA compatible UART. - - "renesas,scifb" for generic SCIFB compatible UART. - - "renesas,hscif" for generic HSCIF compatible UART. - - "renesas,sci" for generic SCI compatible UART. - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first, followed by the - family-specific and/or generic versions. - - - reg: Base address and length of the I/O registers used by the UART. - - interrupts: Must contain one or more interrupt-specifiers for the SCIx. - If a single interrupt is expressed, then all events are - multiplexed into this single interrupt. - - If multiple interrupts are provided by the hardware, the order - in which the interrupts are listed must match order below. Note - that some HW interrupt events may be muxed together resulting - in duplicate entries. - The interrupt order is as follows: - 1. Error (ERI) - 2. Receive buffer full (RXI) - 3. Transmit buffer empty (TXI) - 4. Break (BRI) - 5. Data Ready (DRI) - 6. Transmit End (TEI) - - - clocks: Must contain a phandle and clock-specifier pair for each entry - in clock-names. - - clock-names: Must contain "fck" for the SCIx UART functional clock. - Apart from the divided functional clock, there may be other possible - sources for the sampling clock, depending on SCIx variant. - On (H)SCI(F) and some SCIFA, an additional clock may be specified: - - "hsck" for the optional external clock input (on HSCIF), - - "sck" for the optional external clock input (on other variants). - On UARTs equipped with a Baud Rate Generator for External Clock (BRG) - (some SCIF and HSCIF), additional clocks may be specified: - - "brg_int" for the optional internal clock source for the frequency - divider (typically the (AXI or SHwy) bus clock), - - "scif_clk" for the optional external clock source for the frequency - divider (SCIF_CLK). - -Note: Each enabled SCIx UART may have an optional "serialN" alias in the -"aliases" node. - -Optional properties: - - dmas: Must contain a list of two references to DMA specifiers, one for - transmission, and one for reception. - - dma-names: Must contain a list of two DMA names, "tx" and "rx". - - {cts,dsr,dcd,rng,rts,dtr}-gpios: Specify GPIOs for modem lines, cfr. the - generic serial DT bindings in serial.yaml. - - uart-has-rtscts: Indicates dedicated lines for RTS/CTS hardware flow - control, cfr. the generic serial DT bindings in serial.yaml. - -Example: - aliases { - serial0 = &scifa0; - }; - - scifa0: serial@e6c40000 { - compatible = "renesas,scifa-r8a7790", - "renesas,rcar-gen2-scifa", "renesas,scifa"; - reg = <0 0xe6c40000 0 64>; - interrupt-parent = <&gic>; - interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>; - clock-names = "fck"; - dmas = <&dmac0 0x21>, <&dmac0 0x22>; - dma-names = "tx", "rx"; - }; diff --git a/Documentation/devicetree/bindings/serial/renesas,sci.yaml b/Documentation/devicetree/bindings/serial/renesas,sci.yaml new file mode 100644 index 0000000000000000..4183b7311f373abd --- /dev/null +++ b/Documentation/devicetree/bindings/serial/renesas,sci.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/serial/renesas,sci.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas Serial Communication Interface + +maintainers: + - Geert Uytterhoeven + +allOf: + - $ref: serial.yaml# + +properties: + compatible: + const: renesas,sci + + reg: + maxItems: 1 + + interrupts: + items: + - description: Error interrupt + - description: Receive buffer full interrupt + - description: Transmit buffer empty interrupt + - description: Transmit end interrupt + + interrupt-names: + items: + - const: eri + - const: rxi + - const: txi + - const: tei + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + items: + enum: + - fck # UART functional clock + - sck # optional external clock input + + uart-has-rtscts: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + aliases { + serial0 = &sci0; + }; + + sci0: serial@ffff78 { + compatible = "renesas,sci"; + reg = <0xffff78 8>; + interrupts = <88 0>, <89 0>, <90 0>, <91 0>; + clocks = <&fclk>; + clock-names = "fck"; + }; diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml new file mode 100644 index 0000000000000000..70392b9bd97724f9 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml @@ -0,0 +1,172 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/serial/renesas,scif.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas Serial Communication Interface with FIFO (SCIF) + +maintainers: + - Geert Uytterhoeven + +allOf: + - $ref: serial.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,scif-r7s72100 # RZ/A1H + - const: renesas,scif # generic SCIF compatible UART + + - items: + - enum: + - renesas,scif-r7s9210 # RZ/A2 + + - items: + - enum: + - renesas,scif-r8a7778 # R-Car M1 + - renesas,scif-r8a7779 # R-Car H1 + - const: renesas,rcar-gen1-scif # R-Car Gen1 + - const: renesas,scif # generic SCIF compatible UART + + - items: + - enum: + - renesas,scif-r8a7743 # RZ/G1M + - renesas,scif-r8a7744 # RZ/G1N + - renesas,scif-r8a7745 # RZ/G1E + - renesas,scif-r8a77470 # RZ/G1C + - renesas,scif-r8a7790 # R-Car H2 + - renesas,scif-r8a7791 # R-Car M2-W + - renesas,scif-r8a7792 # R-Car V2H + - renesas,scif-r8a7793 # R-Car M2-N + - renesas,scif-r8a7794 # R-Car E2 + - const: renesas,rcar-gen2-scif # R-Car Gen2 and RZ/G1 + - const: renesas,scif # generic SCIF compatible UART + + - items: + - enum: + - renesas,scif-r8a774a1 # RZ/G2M + - renesas,scif-r8a774b1 # RZ/G2N + - renesas,scif-r8a774c0 # RZ/G2E + - renesas,scif-r8a7795 # R-Car H3 + - renesas,scif-r8a7796 # R-Car M3-W + - renesas,scif-r8a77961 # R-Car M3-W+ + - renesas,scif-r8a77965 # R-Car M3-N + - renesas,scif-r8a77970 # R-Car V3M + - renesas,scif-r8a77980 # R-Car V3H + - renesas,scif-r8a77990 # R-Car E3 + - renesas,scif-r8a77995 # R-Car D3 + - const: renesas,rcar-gen3-scif # R-Car Gen3 and RZ/G2 + - const: renesas,scif # generic SCIF compatible UART + + reg: + maxItems: 1 + + interrupts: + oneOf: + - items: + - description: A combined interrupt + - items: + - description: Error interrupt + - description: Receive buffer full interrupt + - description: Transmit buffer empty interrupt + - description: Transmit End interrupt + - items: + - description: Error interrupt + - description: Receive buffer full interrupt + - description: Transmit buffer empty interrupt + - description: Break interrupt + - description: Data Ready interrupt + - description: Transmit End interrupt + + interrupt-names: + oneOf: + - items: + - const: eri + - const: rxi + - const: txi + - const: tei + - items: + - const: eri + - const: rxi + - const: txi + - const: bri + - const: dri + - const: tei + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + items: + enum: + - fck # UART functional clock + - sck # optional external clock input + - brg_int # optional internal clock source for BRG frequency divider + - scif_clk # optional external clock source for BRG frequency divider + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + description: + Must contain a list of pairs of references to DMA specifiers, one for + transmission, and one for reception. + + dma-names: + minItems: 2 + maxItems: 4 + items: + enum: + - tx + - rx + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + +if: + properties: + compatible: + contains: + enum: + - renesas,rcar-gen2-scif + - renesas,rcar-gen3-scif +then: + required: + - resets + +examples: + - | + #include + #include + #include + aliases { + serial0 = &scif0; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif", + "renesas,scif"; + reg = <0xe6e60000 64>; + interrupts = ; + clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 721>; + }; diff --git a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml new file mode 100644 index 0000000000000000..b28bcb268854e844 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/serial/renesas,scifa.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas Serial Communications Interface with FIFO A (SCIFA) + +maintainers: + - Geert Uytterhoeven + +allOf: + - $ref: serial.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,scifa-r8a73a4 # R-Mobile APE6 + - renesas,scifa-r8a7740 # R-Mobile A1 + - renesas,scifa-sh73a0 # SH-Mobile AG5 + - const: renesas,scifa # generic SCIFA compatible UART + + - items: + - enum: + - renesas,scifa-r8a7743 # R8A7743 RZ/G1M + - renesas,scifa-r8a7744 # R8A7744 RZ/G1N + - renesas,scifa-r8a7745 # R8A7745 RZ/G1E + - renesas,scifa-r8a7790 # R8A7790 R-Car H2 + - renesas,scifa-r8a7791 # R8A7791 R-Car M2-W + - renesas,scifa-r8a7793 # R8A7793 R-Car M2-N + - renesas,scifa-r8a7794 # R8A7794 R-Car E2 + - const: renesas,rcar-gen2-scifa # R-Car Gen2 and RZ/G1 + - const: renesas,scifa # generic SCIFA compatible UART + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + enum: + - fck # UART functional clock + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + description: + Must contain a list of pairs of references to DMA specifiers, one for + transmission, and one for reception. + + dma-names: + minItems: 2 + maxItems: 4 + items: + enum: + - tx + - rx + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + +if: + properties: + compatible: + contains: + enum: + - renesas,rcar-gen2-scifa +then: + required: + - resets + +examples: + - | + #include + #include + #include + aliases { + serial0 = &scifa0; + }; + + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a7790", "renesas,rcar-gen2-scifa", + "renesas,scifa"; + reg = <0xe6c40000 64>; + interrupts = ; + clocks = <&cpg CPG_MOD 204>; + clock-names = "fck"; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 204>; + dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>; + dma-names = "tx", "rx", "tx", "rx"; + }; diff --git a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml new file mode 100644 index 0000000000000000..57205cb1dcd42183 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/serial/renesas,scifb.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Renesas Serial Communications Interface with FIFO B (SCIFB) + +maintainers: + - Geert Uytterhoeven + +allOf: + - $ref: serial.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,scifb-r8a73a4 # R-Mobile APE6 + - renesas,scifb-r8a7740 # R-Mobile A1 + - renesas,scifb-sh73a0 # SH-Mobile AG5 + - const: renesas,scifb # generic SCIFB compatible UART + + - items: + - enum: + - renesas,scifb-r8a7743 # RZ/G1M + - renesas,scifb-r8a7744 # RZ/G1N + - renesas,scifb-r8a7745 # RZ/G1E + - renesas,scifb-r8a7790 # R-Car H2 + - renesas,scifb-r8a7791 # R-Car M2-W + - renesas,scifb-r8a7793 # R-Car M2-N + - renesas,scifb-r8a7794 # R-Car E2 + - const: renesas,rcar-gen2-scifb # R-Car Gen2 and RZ/G1 + - const: renesas,scifb # generic SCIFB compatible UART + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + enum: + - fck # UART functional clock + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + dmas: + description: + Must contain a list of pairs of references to DMA specifiers, one for + transmission, and one for reception. + + dma-names: + minItems: 2 + maxItems: 4 + items: + enum: + - tx + - rx + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + +if: + properties: + compatible: + contains: + enum: + - renesas,rcar-gen2-scifb +then: + required: + - resets + +examples: + - | + #include + #include + scifb: serial@e6c30000 { + compatible = "renesas,scifb-r8a7740", "renesas,scifb"; + reg = <0xe6c30000 0x100>; + interrupts = ; + clocks = <&mstp2_clks R8A7740_CLK_SCIFB>; + clock-names = "fck"; + power-domains = <&pd_a3sp>; + };