diff mbox series

[2/2] spi: sh-msiof: Fill in controller speed limits

Message ID 20210113101916.1147695-3-geert+renesas@glider.be (mailing list archive)
State New, archived
Headers show
Series spi: sh-msiof: Advertize bit rate limits and actual speed | expand

Commit Message

Geert Uytterhoeven Jan. 13, 2021, 10:19 a.m. UTC 
Fill in the controller speed limits, so the SPI core can use them for
validating SPI transfers, and adjust or reject transfers when needed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 drivers/spi/spi-sh-msiof.c | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index 90b8aba8a4fd9f32..41ed9ff8fad0d3b3 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -1262,6 +1262,7 @@  static int sh_msiof_spi_probe(struct platform_device *pdev)
 	const struct sh_msiof_chipdata *chipdata;
 	struct sh_msiof_spi_info *info;
 	struct sh_msiof_spi_priv *p;
+	unsigned long clksrc;
 	int i;
 	int ret;
 
@@ -1337,6 +1338,9 @@  static int sh_msiof_spi_probe(struct platform_device *pdev)
 	/* init controller code */
 	ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
 	ctlr->mode_bits |= SPI_LSB_FIRST | SPI_3WIRE;
+	clksrc = clk_get_rate(p->clk);
+	ctlr->min_speed_hz = DIV_ROUND_UP(clksrc, 1024);
+	ctlr->max_speed_hz = DIV_ROUND_UP(clksrc, 1 << p->min_div_pow);
 	ctlr->flags = chipdata->ctlr_flags;
 	ctlr->bus_num = pdev->id;
 	ctlr->num_chipselect = p->info->num_chipselect;