===================================================================
@@ -530,7 +530,6 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
r8a7778-bockw.dtb \
r8a7779-marzen.dtb \
r8a7790-lager.dtb \
- r8a7791-henninger.dtb \
r8a7791-koelsch.dtb \
r8a7791-porter.dtb \
r8a7793-gose.dtb \
===================================================================
@@ -1,320 +0,0 @@
-/*
- * Device Tree Source for the Henninger board
- *
- * Copyright (C) 2014 Renesas Solutions Corp.
- * Copyright (C) 2014 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7791.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Henninger";
- compatible = "renesas,henninger", "renesas,r8a7791";
-
- aliases {
- serial0 = &scif0;
- };
-
- chosen {
- bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp";
- stdout-path = &scif0;
- };
-
- memory@40000000 {
- device_type = "memory";
- reg = <0 0x40000000 0 0x40000000>;
- };
-
- memory@200000000 {
- device_type = "memory";
- reg = <2 0x00000000 0 0x40000000>;
- };
-
- vcc_sdhi0: regulator@0 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI0 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vccq_sdhi0: regulator@1 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI0 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
- };
-
- vcc_sdhi2: regulator@2 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI2 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vccq_sdhi2: regulator@3 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI2 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
- };
-};
-
-&extal_clk {
- clock-frequency = <20000000>;
-};
-
-&pfc {
- scif0_pins: serial0 {
- renesas,groups = "scif0_data_d";
- renesas,function = "scif0";
- };
-
- ether_pins: ether {
- renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
- renesas,function = "eth";
- };
-
- phy1_pins: phy1 {
- renesas,groups = "intc_irq0";
- renesas,function = "intc";
- };
-
- sdhi0_pins: sd0 {
- renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
- renesas,function = "sdhi0";
- };
-
- sdhi2_pins: sd2 {
- renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
- renesas,function = "sdhi2";
- };
-
- i2c2_pins: i2c2 {
- renesas,groups = "i2c2";
- renesas,function = "i2c2";
- };
-
- qspi_pins: spi0 {
- renesas,groups = "qspi_ctrl", "qspi_data4";
- renesas,function = "qspi";
- };
-
- msiof0_pins: spi1 {
- renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
- "msiof0_tx";
- renesas,function = "msiof0";
- };
-
- usb0_pins: usb0 {
- renesas,groups = "usb0";
- renesas,function = "usb0";
- };
-
- usb1_pins: usb1 {
- renesas,groups = "usb1";
- renesas,function = "usb1";
- };
-
- vin0_pins: vin0 {
- renesas,groups = "vin0_data8", "vin0_clk";
- renesas,function = "vin0";
- };
-
- can0_pins: can0 {
- renesas,groups = "can0_data";
- renesas,function = "can0";
- };
-};
-
-&scif0 {
- pinctrl-0 = <&scif0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-ðer {
- pinctrl-0 = <ðer_pins &phy1_pins>;
- pinctrl-names = "default";
-
- phy-handle = <&phy1>;
- renesas,ether-link-active-low;
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- interrupt-parent = <&irqc0>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- micrel,led-mode = <1>;
- };
-};
-
-&sata0 {
- status = "okay";
-};
-
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-names = "default";
-
- vmmc-supply = <&vcc_sdhi0>;
- vqmmc-supply = <&vccq_sdhi0>;
- cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-&sdhi2 {
- pinctrl-0 = <&sdhi2_pins>;
- pinctrl-names = "default";
-
- vmmc-supply = <&vcc_sdhi2>;
- vqmmc-supply = <&vccq_sdhi2>;
- cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-0 = <&i2c2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
- clock-frequency = <400000>;
-
- composite-in@20 {
- compatible = "adi,adv7180";
- reg = <0x20>;
- remote = <&vin0>;
-
- port {
- adv7180: endpoint {
- bus-width = <8>;
- remote-endpoint = <&vin0ep>;
- };
- };
- };
-};
-
-&qspi {
- pinctrl-0 = <&qspi_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25fl512s", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <30000000>;
- spi-tx-bus-width = <4>;
- spi-rx-bus-width = <4>;
- m25p,fast-read;
-
- partition@0 {
- label = "loader_prg";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition@40000 {
- label = "user_prg";
- reg = <0x00040000 0x00400000>;
- read-only;
- };
- partition@440000 {
- label = "flash_fs";
- reg = <0x00440000 0x03bc0000>;
- };
- };
-};
-
-&msiof0 {
- pinctrl-0 = <&msiof0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- pmic@0 {
- compatible = "renesas,r2a11302ft";
- reg = <0>;
- spi-max-frequency = <6000000>;
- spi-cpol;
- spi-cpha;
- };
-};
-
-&pci0 {
- status = "okay";
- pinctrl-0 = <&usb0_pins>;
- pinctrl-names = "default";
-};
-
-&pci1 {
- status = "okay";
- pinctrl-0 = <&usb1_pins>;
- pinctrl-names = "default";
-};
-
-&hsusb {
- status = "okay";
- pinctrl-0 = <&usb0_pins>;
- pinctrl-names = "default";
- renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
-};
-
-&usbphy {
- status = "okay";
-};
-
-&pcie_bus_clk {
- status = "okay";
-};
-
-&pciec {
- status = "okay";
-};
-
-/* composite video input */
-&vin0 {
- status = "okay";
- pinctrl-0 = <&vin0_pins>;
- pinctrl-names = "default";
-
- port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- vin0ep: endpoint {
- remote-endpoint = <&adv7180>;
- bus-width = <8>;
- };
- };
-};
-
-&can0 {
- pinctrl-0 = <&can0_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
The Henninger low cost board was never sold and so had no users outside Renesas (and Cogent Embedded). Instead Renesas has made the Porter board which has mostly similar hardware. Now that the Porter board support is on par with Henninger, we can remove the Henninger's device tree file. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> --- This patch is against 'renesas-devel-20151028-v4.3-rc7' tag of Simon Horman's 'renesas.git' repo. arch/arm/boot/dts/Makefile | 1 arch/arm/boot/dts/r8a7791-henninger.dts | 320 -------------------------------- 2 files changed, 321 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html