@@ -190,6 +190,13 @@ config SH_SH7763RDP
Select SH7763RDP if configuring for a Renesas SH7763
evaluation board.
+config SH_ESPT
+ bool "ESPT"
+ depends on CPU_SUBTYPE_SH7763
+ help
+ Select ESPT if configuring for a Renesas SH7763
+ with gigabit ether evaluation board.
+
config SH_EDOSK7705
bool "EDOSK7705"
depends on CPU_SUBTYPE_SH7705
@@ -7,3 +7,4 @@ obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o
obj-$(CONFIG_SH_URQUELL) += board-urquell.o
obj-$(CONFIG_SH_SHMIN) += board-shmin.o
obj-$(CONFIG_SH_EDOSK7760) += board-edosk7760.o
+obj-$(CONFIG_SH_ESPT) += board-espt.o
new file mode 100644
@@ -0,0 +1,105 @@
+/*
+ * linux/arch/sh/boards/renesas/espt/setup.c
+ *
+ * Data Technology Inc. ESPT-GIGA board suport
+ *
+ * Copyright (C) 2008, 2009 Renesas Solutions Corp.
+ * Copyright (C) 2008, 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+#include <asm/sh_eth.h>
+//#include <mach/espt.h>
+
+/* NOR Flash */
+static struct mtd_partition espt_nor_flash_partitions[] = {
+ {
+ .name = "U-Boot",
+ .offset = 0,
+ .size = (2 * SZ_128K),
+ .mask_flags = MTD_WRITEABLE, /* Read-only */
+ }, {
+ .name = "Linux-Kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = (20 * SZ_128K),
+ }, {
+ .name = "Root Filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data espt_nor_flash_data = {
+ .width = 2,
+ .parts = espt_nor_flash_partitions,
+ .nr_parts = ARRAY_SIZE(espt_nor_flash_partitions),
+};
+
+static struct resource espt_nor_flash_resources[] = {
+ [0] = {
+ .name = "NOR Flash",
+ .start = 0,
+ .end = SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device espt_nor_flash_device = {
+ .name = "physmap-flash",
+ .resource = espt_nor_flash_resources,
+ .num_resources = ARRAY_SIZE(espt_nor_flash_resources),
+ .dev = {
+ .platform_data = &espt_nor_flash_data,
+ },
+};
+
+/* SH-Ether */
+static struct resource sh_eth_resources[] = {
+ {
+ .start = 0xFEE00800, /* use eth1 */
+ .end = 0xFEE00F7C - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 57, /* irq number */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct sh_eth_plat_data sh7763_eth_pdata = {
+ .phy = 0,
+ .edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device espt_eth_device = {
+ .name = "sh-eth",
+ .resource = sh_eth_resources,
+ .num_resources = ARRAY_SIZE(sh_eth_resources),
+ .dev = {
+ .platform_data = &sh7763_eth_pdata,
+ },
+};
+
+static struct platform_device *espt_devices[] __initdata = {
+ &espt_nor_flash_device,
+ &espt_eth_device,
+};
+
+static int __init espt_devices_setup(void)
+{
+ return platform_add_devices(espt_devices,
+ ARRAY_SIZE(espt_devices));
+}
+device_initcall(espt_devices_setup);
+
+static struct sh_machine_vector mv_espt __initmv = {
+ .mv_name = "ESPT-GIGA",
+};
@@ -53,3 +53,4 @@ AP325RXA SH_AP325RXA
SH7763RDP SH_SH7763RDP
SH7785LCR SH_SH7785LCR
URQUELL SH_URQUELL
+ESPT SH_ESPT
Espt-giga is the board which used SH7763. This supports serial, Gigabit ether, USB host and MTD. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> --- arch/sh/boards/Kconfig | 7 +++ arch/sh/boards/Makefile | 1 + arch/sh/boards/board-espt.c | 105 +++++++++++++++++++++++++++++++++++++++++++ arch/sh/tools/mach-types | 1 + 4 files changed, 114 insertions(+), 0 deletions(-) create mode 100644 arch/sh/boards/board-espt.c