@@ -1160,6 +1160,24 @@ static void usbhsf_dma_complete(void *arg)
usbhs_pipe_number(pipe), ret);
}
+void usbhs_fifo_clear_dcp(struct usbhs_pipe *pipe)
+{
+ struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+ struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */
+
+ /* clear DCP FIFO of transmission */
+ if (usbhsf_fifo_select(pipe, fifo, 1) < 0)
+ return;
+ usbhsf_fifo_clear(pipe, fifo);
+ usbhsf_fifo_unselect(pipe, fifo);
+
+ /* clear DCP FIFO of reception */
+ if (usbhsf_fifo_select(pipe, fifo, 0) < 0)
+ return;
+ usbhsf_fifo_clear(pipe, fifo);
+ usbhsf_fifo_unselect(pipe, fifo);
+}
+
/*
* fifo init
*/
@@ -74,6 +74,7 @@ int usbhs_fifo_probe(struct usbhs_priv *priv);
void usbhs_fifo_remove(struct usbhs_priv *priv);
void usbhs_fifo_init(struct usbhs_priv *priv);
void usbhs_fifo_quit(struct usbhs_priv *priv);
+void usbhs_fifo_clear_dcp(struct usbhs_pipe *pipe);
/*
* packet info
@@ -782,9 +782,9 @@ static int usbhsg_try_start(struct usbhs_priv *priv, u32 status)
/*
* pipe initialize and enable DCP
*/
+ usbhs_fifo_init(priv);
usbhs_pipe_init(priv,
usbhsg_dma_map_ctrl);
- usbhs_fifo_init(priv);
/* dcp init instead of usbhsg_ep_enable() */
dcp->pipe = usbhs_dcp_malloc(priv);
@@ -1474,9 +1474,9 @@ static int usbhsh_start(struct usbhs_priv *priv)
/*
* pipe initialize and enable DCP
*/
+ usbhs_fifo_init(priv);
usbhs_pipe_init(priv,
usbhsh_dma_map_ctrl);
- usbhs_fifo_init(priv);
usbhsh_pipe_init_for_host(priv);
/*
@@ -618,8 +618,12 @@ void usbhs_pipe_data_sequence(struct usbhs_pipe *pipe, int sequence)
void usbhs_pipe_clear(struct usbhs_pipe *pipe)
{
- usbhsp_pipectrl_set(pipe, ACLRM, ACLRM);
- usbhsp_pipectrl_set(pipe, ACLRM, 0);
+ if (usbhs_pipe_is_dcp(pipe)) {
+ usbhs_fifo_clear_dcp(pipe);
+ } else {
+ usbhsp_pipectrl_set(pipe, ACLRM, ACLRM);
+ usbhsp_pipectrl_set(pipe, ACLRM, 0);
+ }
}
static struct usbhs_pipe *usbhsp_get_pipe(struct usbhs_priv *priv, u32 type)
Since the DCPCTR doesn't have the ACLRM bit, the usbus_pipe_clear() should not call the usbhsp_pipectrl_set() with ACLRM. So, this patch fixes this issue to add the usbhs_fifo_clear_dcp() in fifo.c because the controller needs the CFIFO to clear the DCP PIPE. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> --- drivers/usb/renesas_usbhs/fifo.c | 18 ++++++++++++++++++ drivers/usb/renesas_usbhs/fifo.h | 1 + drivers/usb/renesas_usbhs/mod_gadget.c | 2 +- drivers/usb/renesas_usbhs/mod_host.c | 2 +- drivers/usb/renesas_usbhs/pipe.c | 8 ++++++-- 5 files changed, 27 insertions(+), 4 deletions(-)