diff mbox

[5/9,v3] mmc: tmio: check ILL_FUNC instead of CBSY

Message ID 874mx1tgqe.wl%kuninori.morimoto.gx@gmail.com (mailing list archive)
State Awaiting Upstream
Headers show

Commit Message

Kuninori Morimoto Aug. 25, 2014, 3:01 a.m. UTC 
From: Shinobu Uehara <shinobu.uehara.xc@renesas.com>

Some controllers need to check SD bus status when writing data.
Then, it checks ILL_FUNC bit on SD_INFO2 register,
and this method is controlled via TMIO_MMC_HAS_IDLE_WAIT flags.
Same method is required on tmio_mmc_data_irq() which will
be called after writing data.

Current driver is checking CBSY bit for this purpose,
but, some controllers doesn't have CBSY bit.
This patch checks ILL_FUNC bit instead of CBSY bit
if it has TMIO_MMC_HAS_IDLE_WAIT flags

[Kuninori Morimoto: tidyuped for upstreaming]

Tested-by: Nguyen Xuan Nui <nx-nui@jinso.co.jp>
Tested-by: Hiep Cao Minh <cm-hiep@jinso.co.jp>
Signed-off-by: Shinobu Uehara <shinobu.uehara.xc@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
v2 -> v3

 - no change

 drivers/mmc/host/tmio_mmc_pio.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index e51a993..b19d0cd 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -475,6 +475,9 @@  static void tmio_mmc_data_irq(struct tmio_mmc_host *host)
 		goto out;
 
 	if (host->chan_tx && (data->flags & MMC_DATA_WRITE) && !host->force_pio) {
+		u32 status = sd_ctrl_read32(host, CTL_STATUS);
+		bool done = false;
+
 		/*
 		 * Has all data been written out yet? Testing on SuperH showed,
 		 * that in most cases the first interrupt comes already with the
@@ -483,7 +486,15 @@  static void tmio_mmc_data_irq(struct tmio_mmc_host *host)
 		 * DATAEND interrupt with the BUSY bit set, in this cases
 		 * waiting for one more interrupt fixes the problem.
 		 */
-		if (!(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_CMD_BUSY)) {
+		if (host->pdata->flags & TMIO_MMC_HAS_IDLE_WAIT) {
+			if (status & TMIO_STAT_ILL_FUNC)
+				done = true;
+		} else {
+			if (!(status & TMIO_STAT_CMD_BUSY))
+				done = true;
+		}
+
+		if (done) {
 			tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
 			tasklet_schedule(&host->dma_complete);
 		}