@@ -114,9 +114,20 @@ struct sh_mobile_ceu_dev {
};
struct sh_mobile_ceu_cam {
- struct v4l2_rect ceu_rect;
- unsigned int cam_width;
- unsigned int cam_height;
+ /* CEU offsets within scaled by the CEU camera output */
+ unsigned int ceu_left;
+ unsigned int ceu_top;
+ /* Client output, as seen by the CEU */
+ unsigned int width;
+ unsigned int height;
+ /*
+ * User window from S_CROP / G_CROP, produced by client cropping and
+ * scaling, CEU scaling and CEU cropping, mapped back onto the client
+ * input window
+ */
+ struct v4l2_rect subrect;
+ /* Camera cropping rectangle */
+ struct v4l2_rect rect;
const struct soc_mbus_pixelfmt *extra_fmt;
enum v4l2_mbus_pixelcode code;
};
@@ -564,38 +575,36 @@ static u16 calc_scale(unsigned int src, unsigned int *dst)
}
/* rect is guaranteed to not exceed the scaled camera rectangle */
-static void sh_mobile_ceu_set_rect(struct soc_camera_device *icd,
- unsigned int out_width,
- unsigned int out_height)
+static void sh_mobile_ceu_set_rect(struct soc_camera_device *icd)
{
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct sh_mobile_ceu_cam *cam = icd->host_priv;
- struct v4l2_rect *rect = &cam->ceu_rect;
struct sh_mobile_ceu_dev *pcdev = ici->priv;
unsigned int height, width, cdwdr_width, in_width, in_height;
unsigned int left_offset, top_offset;
u32 camor;
- dev_dbg(icd->dev.parent, "Crop %ux%u@%u:%u\n",
- rect->width, rect->height, rect->left, rect->top);
+ dev_geo(icd->dev.parent, "Crop %ux%u@%u:%u\n",
+ icd->user_width, icd->user_height, cam->ceu_left, cam->ceu_top);
- left_offset = rect->left;
- top_offset = rect->top;
+ left_offset = cam->ceu_left;
+ top_offset = cam->ceu_top;
+ /* CEU cropping (CFSZR) is applied _after_ the scaling filter (CFLCR) */
if (pcdev->image_mode) {
- in_width = rect->width;
+ in_width = cam->width;
if (!pcdev->is_16bit) {
in_width *= 2;
left_offset *= 2;
}
- width = out_width;
- cdwdr_width = out_width;
+ width = icd->user_width;
+ cdwdr_width = icd->user_width;
} else {
- int bytes_per_line = soc_mbus_bytes_per_line(out_width,
+ int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
icd->current_fmt->host_fmt);
unsigned int w_factor;
- width = out_width;
+ width = icd->user_width;
switch (icd->current_fmt->host_fmt->packing) {
case SOC_MBUS_PACKING_2X8_PADHI:
@@ -605,17 +614,17 @@ static void sh_mobile_ceu_set_rect(struct soc_camera_device *icd,
w_factor = 1;
}
- in_width = rect->width * w_factor;
+ in_width = cam->width * w_factor;
left_offset = left_offset * w_factor;
if (bytes_per_line < 0)
- cdwdr_width = out_width;
+ cdwdr_width = icd->user_width;
else
cdwdr_width = bytes_per_line;
}
- height = out_height;
- in_height = rect->height;
+ height = icd->user_height;
+ in_height = cam->height;
if (V4L2_FIELD_NONE != pcdev->field) {
height /= 2;
in_height /= 2;
@@ -774,9 +783,10 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
}
ceu_write(pcdev, CAIFR, value);
- sh_mobile_ceu_set_rect(icd, icd->user_width, icd->user_height);
+ sh_mobile_ceu_set_rect(icd);
mdelay(1);
+ dev_geo(icd->dev.parent, "CFLCR 0x%x\n", pcdev->cflcr);
ceu_write(pcdev, CFLCR, pcdev->cflcr);
/*
@@ -865,6 +875,8 @@ static bool sh_mobile_ceu_packing_supported(const struct soc_mbus_pixelfmt *fmt)
fmt->packing == SOC_MBUS_PACKING_EXTEND16);
}
+static int client_g_rect(struct v4l2_subdev *sd, struct v4l2_rect *rect);
+
static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, int idx,
struct soc_camera_format_xlate *xlate)
{
@@ -893,10 +905,55 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, int idx,
return 0;
if (!icd->host_priv) {
+ struct v4l2_mbus_framefmt mf;
+ struct v4l2_rect rect;
+ struct device *dev = icd->dev.parent;
+ int shift = 0;
+
+ /* FIXME: subwindow is lost between close / open */
+
+ /* Cache current client geometry */
+ ret = client_g_rect(sd, &rect);
+ if (ret < 0)
+ return ret;
+
+ /* First time */
+ ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mf);
+ if (ret < 0)
+ return ret;
+
+ while ((mf.width > 2560 || mf.height > 1920) && shift < 4) {
+ /* Try 2560x1920, 1280x960, 640x480, 320x240 */
+ mf.width = 2560 >> shift;
+ mf.height = 1920 >> shift;
+ ret = v4l2_subdev_call(sd, video, s_mbus_fmt, &mf);
+ if (ret < 0)
+ return ret;
+ shift++;
+ }
+
+ if (shift == 4) {
+ dev_err(dev, "Failed to configure the client below %ux%x\n",
+ mf.width, mf.height);
+ return -EIO;
+ }
+
+ dev_geo(dev, "camera fmt %ux%u\n", mf.width, mf.height);
+
cam = kzalloc(sizeof(*cam), GFP_KERNEL);
if (!cam)
return -ENOMEM;
+ /* We are called with current camera crop, initialise subrect with it */
+ cam->rect = rect;
+ cam->subrect = rect;
+
+ cam->width = mf.width;
+ cam->height = mf.height;
+
+ cam->width = mf.width;
+ cam->height = mf.height;
+
icd->host_priv = cam;
} else {
cam = icd->host_priv;
@@ -978,16 +1035,12 @@ static unsigned int scale_down(unsigned int size, unsigned int scale)
return (size * 4096 + scale / 2) / scale;
}
-static unsigned int scale_up(unsigned int size, unsigned int scale)
-{
- return (size * scale + 2048) / 4096;
-}
-
static unsigned int calc_generic_scale(unsigned int input, unsigned int output)
{
return (input * 4096 + output / 2) / output;
}
+/* Get and store current client crop */
static int client_g_rect(struct v4l2_subdev *sd, struct v4l2_rect *rect)
{
struct v4l2_crop crop;
@@ -1006,25 +1059,51 @@ static int client_g_rect(struct v4l2_subdev *sd, struct v4l2_rect *rect)
cap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
ret = v4l2_subdev_call(sd, video, cropcap, &cap);
- if (ret < 0)
- return ret;
-
- *rect = cap.defrect;
+ if (!ret)
+ *rect = cap.defrect;
return ret;
}
+/* Client crop has changed, update our sub-rectangle to remain within the area */
+static void update_subrect(struct sh_mobile_ceu_cam *cam)
+{
+ struct v4l2_rect *rect = &cam->rect, *subrect = &cam->subrect;
+
+ if (rect->width < subrect->width)
+ subrect->width = rect->width;
+
+ if (rect->height < subrect->height)
+ subrect->height = rect->height;
+
+ if (rect->left > subrect->left)
+ subrect->left = rect->left;
+ else if (rect->left + rect->width >
+ subrect->left + subrect->width)
+ subrect->left = rect->left + rect->width -
+ subrect->width;
+
+ if (rect->top > subrect->top)
+ subrect->top = rect->top;
+ else if (rect->top + rect->height >
+ subrect->top + subrect->height)
+ subrect->top = rect->top + rect->height -
+ subrect->height;
+}
+
/*
* The common for both scaling and cropping iterative approach is:
* 1. try if the client can produce exactly what requested by the user
* 2. if (1) failed, try to double the client image until we get one big enough
* 3. if (2) failed, try to request the maximum image
*/
-static int client_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *crop,
+static int client_s_crop(struct soc_camera_device *icd, struct v4l2_crop *crop,
struct v4l2_crop *cam_crop)
{
+ struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
struct v4l2_rect *rect = &crop->c, *cam_rect = &cam_crop->c;
struct device *dev = sd->v4l2_dev->dev;
+ struct sh_mobile_ceu_cam *cam = icd->host_priv;
struct v4l2_cropcap cap;
int ret;
unsigned int width, height;
@@ -1042,6 +1121,7 @@ static int client_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *crop,
/* Even if camera S_CROP failed, but camera rectangle matches */
dev_dbg(dev, "Camera S_CROP successful for %dx%d@%d:%d\n",
rect->width, rect->height, rect->left, rect->top);
+ cam->rect = *cam_rect;
return 0;
}
@@ -1056,6 +1136,7 @@ static int client_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *crop,
if (ret < 0)
return ret;
+ /* Put user requested rectangle within sensor bounds */
soc_camera_limit_side(&rect->left, &rect->width, cap.bounds.left, 2,
cap.bounds.width);
soc_camera_limit_side(&rect->top, &rect->height, cap.bounds.top, 4,
@@ -1068,6 +1149,10 @@ static int client_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *crop,
width = max(cam_rect->width, 2);
height = max(cam_rect->height, 2);
+ /*
+ * Loop as long as sensor is not covering the requested rectangle and
+ * is still within its bounds
+ */
while (!ret && (is_smaller(cam_rect, rect) ||
is_inside(cam_rect, rect)) &&
(cap.bounds.width > width || cap.bounds.height > height)) {
@@ -1085,6 +1170,7 @@ static int client_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *crop,
* target left, set it to the middle point between the current
* left and minimum left. But that would add too much
* complexity: we would have to iterate each border separately.
+ * Instead we just drop to the left and top bounds.
*/
if (cam_rect->left > rect->left)
cam_rect->left = cap.bounds.left;
@@ -1121,77 +1207,19 @@ static int client_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *crop,
cam_rect->left, cam_rect->top);
}
- return ret;
-}
-
-static int get_camera_scales(struct v4l2_subdev *sd, struct v4l2_rect *rect,
- unsigned int *scale_h, unsigned int *scale_v)
-{
- struct v4l2_mbus_framefmt mf;
- int ret;
-
- ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mf);
- if (ret < 0)
- return ret;
-
- *scale_h = calc_generic_scale(rect->width, mf.width);
- *scale_v = calc_generic_scale(rect->height, mf.height);
-
- return 0;
-}
-
-static int get_camera_subwin(struct soc_camera_device *icd,
- struct v4l2_rect *cam_subrect,
- unsigned int cam_hscale, unsigned int cam_vscale)
-{
- struct sh_mobile_ceu_cam *cam = icd->host_priv;
- struct v4l2_rect *ceu_rect = &cam->ceu_rect;
-
- if (!ceu_rect->width) {
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- struct device *dev = icd->dev.parent;
- struct v4l2_mbus_framefmt mf;
- int ret;
- /* First time */
-
- ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mf);
- if (ret < 0)
- return ret;
-
- dev_geo(dev, "camera fmt %ux%u\n", mf.width, mf.height);
-
- if (mf.width > 2560) {
- ceu_rect->width = 2560;
- ceu_rect->left = (mf.width - 2560) / 2;
- } else {
- ceu_rect->width = mf.width;
- ceu_rect->left = 0;
- }
-
- if (mf.height > 1920) {
- ceu_rect->height = 1920;
- ceu_rect->top = (mf.height - 1920) / 2;
- } else {
- ceu_rect->height = mf.height;
- ceu_rect->top = 0;
- }
-
- dev_geo(dev, "initialised CEU rect %ux%u@%u:%u\n",
- ceu_rect->width, ceu_rect->height,
- ceu_rect->left, ceu_rect->top);
+ if (!ret) {
+ cam->rect = *cam_rect;
+ update_subrect(cam);
}
- cam_subrect->width = scale_up(ceu_rect->width, cam_hscale);
- cam_subrect->left = scale_up(ceu_rect->left, cam_hscale);
- cam_subrect->height = scale_up(ceu_rect->height, cam_vscale);
- cam_subrect->top = scale_up(ceu_rect->top, cam_vscale);
-
- return 0;
+ return ret;
}
+/* Iterative s_mbus_fmt, also updates cached client crop on success */
static int client_s_fmt(struct soc_camera_device *icd,
struct v4l2_mbus_framefmt *mf, bool ceu_can_scale)
{
+ struct sh_mobile_ceu_cam *cam = icd->host_priv;
struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
struct device *dev = icd->dev.parent;
unsigned int width = mf->width, height = mf->height, tmp_w, tmp_h;
@@ -1199,6 +1227,15 @@ static int client_s_fmt(struct soc_camera_device *icd,
struct v4l2_cropcap cap;
int ret;
+ ret = v4l2_subdev_call(sd, video, s_mbus_fmt, mf);
+ if (ret < 0)
+ return ret;
+
+ dev_geo(dev, "camera scaled to %ux%u\n", mf->width, mf->height);
+
+ if ((width == mf->width && height == mf->height) || !ceu_can_scale)
+ goto update_cache;
+
cap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
ret = v4l2_subdev_call(sd, video, cropcap, &cap);
@@ -1208,15 +1245,6 @@ static int client_s_fmt(struct soc_camera_device *icd,
max_width = min(cap.bounds.width, 2560);
max_height = min(cap.bounds.height, 1920);
- ret = v4l2_subdev_call(sd, video, s_mbus_fmt, mf);
- if (ret < 0)
- return ret;
-
- dev_geo(dev, "camera scaled to %ux%u\n", mf->width, mf->height);
-
- if ((width == mf->width && height == mf->height) || !ceu_can_scale)
- return 0;
-
/* Camera set a format, but geometry is not precise, try to improve */
tmp_w = mf->width;
tmp_h = mf->height;
@@ -1238,26 +1266,37 @@ static int client_s_fmt(struct soc_camera_device *icd,
}
}
+update_cache:
+ /* Update cache */
+ ret = client_g_rect(sd, &cam->rect);
+ if (ret < 0)
+ return ret;
+
+ update_subrect(cam);
+
return 0;
}
/**
- * @rect - camera cropped rectangle
- * @sub_rect - CEU cropped rectangle, mapped back to camera input area
- * @ceu_rect - on output calculated CEU crop rectangle
+ * @width - on output: user width, mapped back to input
+ * @height - on output: user height, mapped back to input
+ * @mf - in- / output camera output window
*/
-static int client_scale(struct soc_camera_device *icd, struct v4l2_rect *rect,
- struct v4l2_rect *sub_rect, struct v4l2_rect *ceu_rect,
- struct v4l2_mbus_framefmt *mf, bool ceu_can_scale)
+static int client_scale(struct soc_camera_device *icd,
+ struct v4l2_mbus_framefmt *mf,
+ unsigned int *width, unsigned int *height,
+ bool ceu_can_scale)
{
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
struct sh_mobile_ceu_cam *cam = icd->host_priv;
struct device *dev = icd->dev.parent;
struct v4l2_mbus_framefmt mf_tmp = *mf;
unsigned int scale_h, scale_v;
int ret;
- /* 5. Apply iterative camera S_FMT for camera user window. */
+ /*
+ * 5. Apply iterative camera S_FMT for camera user window (also updates
+ * client crop cache and the imaginary sub-rectangle).
+ */
ret = client_s_fmt(icd, &mf_tmp, ceu_can_scale);
if (ret < 0)
return ret;
@@ -1269,60 +1308,22 @@ static int client_scale(struct soc_camera_device *icd, struct v4l2_rect *rect,
/* unneeded - it is already in "mf_tmp" */
- /* 7. Calculate new camera scales. */
- ret = get_camera_scales(sd, rect, &scale_h, &scale_v);
- if (ret < 0)
- return ret;
-
- dev_geo(dev, "7: camera scales %u:%u\n", scale_h, scale_v);
+ /* 7. Calculate new client scales. */
+ scale_h = calc_generic_scale(cam->rect.width, mf_tmp.width);
+ scale_v = calc_generic_scale(cam->rect.height, mf_tmp.height);
- cam->cam_width = mf_tmp.width;
- cam->cam_height = mf_tmp.height;
mf->width = mf_tmp.width;
mf->height = mf_tmp.height;
mf->colorspace = mf_tmp.colorspace;
/*
* 8. Calculate new CEU crop - apply camera scales to previously
- * calculated "effective" crop.
+ * updated "effective" crop.
*/
- ceu_rect->left = scale_down(sub_rect->left, scale_h);
- ceu_rect->width = scale_down(sub_rect->width, scale_h);
- ceu_rect->top = scale_down(sub_rect->top, scale_v);
- ceu_rect->height = scale_down(sub_rect->height, scale_v);
+ *width = scale_down(cam->subrect.width, scale_h);
+ *height = scale_down(cam->subrect.height, scale_v);
- dev_geo(dev, "8: new CEU rect %ux%u@%u:%u\n",
- ceu_rect->width, ceu_rect->height,
- ceu_rect->left, ceu_rect->top);
-
- return 0;
-}
-
-/* Get combined scales */
-static int get_scales(struct soc_camera_device *icd,
- unsigned int *scale_h, unsigned int *scale_v)
-{
- struct sh_mobile_ceu_cam *cam = icd->host_priv;
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- struct v4l2_crop cam_crop;
- unsigned int width_in, height_in;
- int ret;
-
- cam_crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-
- ret = client_g_rect(sd, &cam_crop.c);
- if (ret < 0)
- return ret;
-
- ret = get_camera_scales(sd, &cam_crop.c, scale_h, scale_v);
- if (ret < 0)
- return ret;
-
- width_in = scale_up(cam->ceu_rect.width, *scale_h);
- height_in = scale_up(cam->ceu_rect.height, *scale_v);
-
- *scale_h = calc_generic_scale(width_in, icd->user_width);
- *scale_v = calc_generic_scale(height_in, icd->user_height);
+ dev_geo(dev, "8: new client sub-window %ux%u\n", *width, *height);
return 0;
}
@@ -1341,115 +1342,165 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd,
struct sh_mobile_ceu_dev *pcdev = ici->priv;
struct v4l2_crop cam_crop;
struct sh_mobile_ceu_cam *cam = icd->host_priv;
- struct v4l2_rect *cam_rect = &cam_crop.c, *ceu_rect = &cam->ceu_rect;
+ struct v4l2_rect *cam_rect = &cam_crop.c;
struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
struct device *dev = icd->dev.parent;
struct v4l2_mbus_framefmt mf;
- unsigned int scale_comb_h, scale_comb_v, scale_ceu_h, scale_ceu_v,
- out_width, out_height;
+ unsigned int scale_cam_h, scale_cam_v, scale_ceu_h, scale_ceu_v,
+ out_width, out_height, scale_h, scale_v;
+ int interm_width, interm_height;
u32 capsr, cflcr;
int ret;
- /* 1. Calculate current combined scales. */
- ret = get_scales(icd, &scale_comb_h, &scale_comb_v);
- if (ret < 0)
- return ret;
+ dev_geo(dev, "S_CROP(%ux%u@%u:%u)\n", rect->width, rect->height,
+ rect->left, rect->top);
- dev_geo(dev, "1: combined scales %u:%u\n", scale_comb_h, scale_comb_v);
+ /* During camera cropping its output window can change too, stop CEU */
+ capsr = capture_save_reset(pcdev);
+ dev_dbg(dev, "CAPSR 0x%x, CFLCR 0x%x\n", capsr, pcdev->cflcr);
- /* 2. Apply iterative camera S_CROP for new input window. */
- ret = client_s_crop(sd, a, &cam_crop);
+ /* 1. - 2. Apply iterative camera S_CROP for new input window. */
+ ret = client_s_crop(icd, a, &cam_crop);
if (ret < 0)
return ret;
- dev_geo(dev, "2: camera cropped to %ux%u@%u:%u\n",
+ dev_geo(dev, "1-2: camera cropped to %ux%u@%u:%u\n",
cam_rect->width, cam_rect->height,
cam_rect->left, cam_rect->top);
/* On success cam_crop contains current camera crop */
- /*
- * 3. If old combined scales applied to new crop produce an impossible
- * user window, adjust scales to produce nearest possible window.
- */
- out_width = scale_down(rect->width, scale_comb_h);
- out_height = scale_down(rect->height, scale_comb_v);
-
- if (out_width > 2560)
- out_width = 2560;
- else if (out_width < 2)
- out_width = 2;
-
- if (out_height > 1920)
- out_height = 1920;
- else if (out_height < 4)
- out_height = 4;
-
- dev_geo(dev, "3: Adjusted output %ux%u\n", out_width, out_height);
-
- /* 4. Use G_CROP to retrieve actual input window: already in cam_crop */
-
- /*
- * 5. Using actual input window and calculated combined scales calculate
- * camera target output window.
- */
- mf.width = scale_down(cam_rect->width, scale_comb_h);
- mf.height = scale_down(cam_rect->height, scale_comb_v);
-
- dev_geo(dev, "5: camera target %ux%u\n", mf.width, mf.height);
-
- /* 6. - 9. */
- mf.code = cam->code;
- mf.field = pcdev->field;
-
- capsr = capture_save_reset(pcdev);
- dev_dbg(dev, "CAPSR 0x%x, CFLCR 0x%x\n", capsr, pcdev->cflcr);
+ /* 3. Retrieve camera output window */
+ ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mf);
+ if (ret < 0)
+ return ret;
- /* Make relative to camera rectangle */
- rect->left -= cam_rect->left;
- rect->top -= cam_rect->top;
+ if (mf.width > 2560 || mf.height > 1920)
+ return -EINVAL;
- ret = client_scale(icd, cam_rect, rect, ceu_rect, &mf,
- pcdev->image_mode &&
- V4L2_FIELD_NONE == pcdev->field);
+ /* Cache camera output window */
+ cam->width = mf.width;
+ cam->height = mf.height;
- dev_geo(dev, "6-9: %d\n", ret);
+ /* 4. Calculate camera scales */
+ scale_cam_h = calc_generic_scale(cam_rect->width, mf.width);
+ scale_cam_v = calc_generic_scale(cam_rect->height, mf.height);
- /* 10. Use CEU cropping to crop to the new window. */
- sh_mobile_ceu_set_rect(icd, out_width, out_height);
+ /* Calculate intermediate window */
+ interm_width = scale_down(rect->width, scale_cam_h);
+ interm_height = scale_down(rect->height, scale_cam_v);
- dev_geo(dev, "10: CEU cropped to %ux%u@%u:%u\n",
- ceu_rect->width, ceu_rect->height,
- ceu_rect->left, ceu_rect->top);
+ if (pcdev->image_mode) {
+ out_width = min(interm_width, icd->user_width);
+ out_height = min(interm_height, icd->user_height);
+ } else {
+ out_width = interm_width;
+ out_height = interm_height;
+ }
/*
- * 11. Calculate CEU scales from camera scales from results of (10) and
- * user window from (3)
+ * 5. Calculate CEU scales from camera scales from results of (5) and
+ * the user window
*/
- scale_ceu_h = calc_scale(ceu_rect->width, &out_width);
- scale_ceu_v = calc_scale(ceu_rect->height, &out_height);
+ scale_ceu_h = calc_scale(interm_width, &out_width);
+ scale_ceu_v = calc_scale(interm_height, &out_height);
- dev_geo(dev, "11: CEU scales %u:%u\n", scale_ceu_h, scale_ceu_v);
+ /* Calculate camera scales */
+ scale_h = calc_generic_scale(cam_rect->width, out_width);
+ scale_v = calc_generic_scale(cam_rect->height, out_height);
- /* 12. Apply CEU scales. */
+ dev_geo(dev, "5: CEU scales %u:%u\n", scale_ceu_h, scale_ceu_v);
+
+ /* Apply CEU scales. */
cflcr = scale_ceu_h | (scale_ceu_v << 16);
if (cflcr != pcdev->cflcr) {
pcdev->cflcr = cflcr;
ceu_write(pcdev, CFLCR, cflcr);
}
+ icd->user_width = out_width;
+ icd->user_height = out_height;
+ cam->ceu_left = scale_down(rect->left - cam_rect->left, scale_h) & ~1;
+ cam->ceu_top = scale_down(rect->top - cam_rect->top, scale_v) & ~1;
+
+ /* 6. Use CEU cropping to crop to the new window. */
+ sh_mobile_ceu_set_rect(icd);
+
+ cam->subrect = *rect;
+
+ dev_geo(dev, "6: CEU cropped to %ux%u@%u:%u\n",
+ icd->user_width, icd->user_height,
+ cam->ceu_left, cam->ceu_top);
+
/* Restore capture */
if (pcdev->active)
capsr |= 1;
capture_restore(pcdev, capsr);
- icd->user_width = out_width;
- icd->user_height = out_height;
-
/* Even if only camera cropping succeeded */
return ret;
}
+static int sh_mobile_ceu_get_crop(struct soc_camera_device *icd,
+ struct v4l2_crop *a)
+{
+ struct sh_mobile_ceu_cam *cam = icd->host_priv;
+
+ a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ a->c = cam->subrect;
+
+ return 0;
+}
+
+/*
+ * Calculate real client output window by applying new scales to the current
+ * client crop. New scales are calculated from the requested output format and
+ * CEU crop, mapped backed onto the client input (subrect).
+ */
+static void calculate_client_output(struct soc_camera_device *icd,
+ struct v4l2_pix_format *pix, struct v4l2_mbus_framefmt *mf)
+{
+ struct sh_mobile_ceu_cam *cam = icd->host_priv;
+ struct device *dev = icd->dev.parent;
+ struct v4l2_rect *cam_subrect = &cam->subrect;
+ unsigned int scale_v, scale_h;
+
+ if (cam_subrect->width == cam->rect.width &&
+ cam_subrect->height == cam->rect.height) {
+ /* No sub-cropping */
+ mf->width = pix->width;
+ mf->height = pix->height;
+ return;
+ }
+
+ /* 1.-2. Current camera scales and subwin - cached. */
+
+ dev_geo(dev, "2: subwin %ux%u@%u:%u\n",
+ cam_subrect->width, cam_subrect->height,
+ cam_subrect->left, cam_subrect->top);
+
+ /*
+ * 3. Calculate new combined scales from input sub-window to requested
+ * user window.
+ */
+
+ /*
+ * TODO: CEU cannot scale images larger than VGA to smaller than SubQCIF
+ * (128x96) or larger than VGA
+ */
+ scale_h = calc_generic_scale(cam_subrect->width, pix->width);
+ scale_v = calc_generic_scale(cam_subrect->height, pix->height);
+
+ dev_geo(dev, "3: scales %u:%u\n", scale_h, scale_v);
+
+ /*
+ * 4. Calculate client output window by applying combined scales to real
+ * input window.
+ */
+ mf->width = scale_down(cam->rect.width, scale_h);
+ mf->height = scale_down(cam->rect.height, scale_v);
+}
+
/* Similar to set_crop multistage iterative algorithm */
static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
struct v4l2_format *f)
@@ -1459,18 +1510,17 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
struct sh_mobile_ceu_cam *cam = icd->host_priv;
struct v4l2_pix_format *pix = &f->fmt.pix;
struct v4l2_mbus_framefmt mf;
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
struct device *dev = icd->dev.parent;
__u32 pixfmt = pix->pixelformat;
const struct soc_camera_format_xlate *xlate;
- struct v4l2_crop cam_crop;
- struct v4l2_rect *cam_rect = &cam_crop.c, cam_subrect, ceu_rect;
- unsigned int scale_cam_h, scale_cam_v;
+ unsigned int ceu_sub_width, ceu_sub_height;
u16 scale_v, scale_h;
int ret;
bool image_mode;
enum v4l2_field field;
+ dev_geo(dev, "S_FMT(pix=0x%x, %ux%u)\n", pixfmt, pix->width, pix->height);
+
switch (pix->field) {
default:
pix->field = V4L2_FIELD_NONE;
@@ -1491,46 +1541,8 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
return -EINVAL;
}
- /* 1. Calculate current camera scales. */
- cam_crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-
- ret = client_g_rect(sd, cam_rect);
- if (ret < 0)
- return ret;
-
- ret = get_camera_scales(sd, cam_rect, &scale_cam_h, &scale_cam_v);
- if (ret < 0)
- return ret;
-
- dev_geo(dev, "1: camera scales %u:%u\n", scale_cam_h, scale_cam_v);
-
- /*
- * 2. Calculate "effective" input crop (sensor subwindow) - CEU crop
- * scaled back at current camera scales onto input window.
- */
- ret = get_camera_subwin(icd, &cam_subrect, scale_cam_h, scale_cam_v);
- if (ret < 0)
- return ret;
-
- dev_geo(dev, "2: subwin %ux%u@%u:%u\n",
- cam_subrect.width, cam_subrect.height,
- cam_subrect.left, cam_subrect.top);
-
- /*
- * 3. Calculate new combined scales from "effective" input window to
- * requested user window.
- */
- scale_h = calc_generic_scale(cam_subrect.width, pix->width);
- scale_v = calc_generic_scale(cam_subrect.height, pix->height);
-
- dev_geo(dev, "3: scales %u:%u\n", scale_h, scale_v);
-
- /*
- * 4. Calculate camera output window by applying combined scales to real
- * input window.
- */
- mf.width = scale_down(cam_rect->width, scale_h);
- mf.height = scale_down(cam_rect->height, scale_v);
+ /* 1.-4. Calculate client output geometry */
+ calculate_client_output(icd, &f->fmt.pix, &mf);
mf.field = pix->field;
mf.colorspace = pix->colorspace;
mf.code = xlate->code;
@@ -1546,17 +1558,17 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
image_mode = false;
}
- dev_geo(dev, "4: camera output %ux%u\n", mf.width, mf.height);
+ dev_geo(dev, "4: request camera output %ux%u\n", mf.width, mf.height);
/* 5. - 9. */
- ret = client_scale(icd, cam_rect, &cam_subrect, &ceu_rect, &mf,
+ ret = client_scale(icd, &mf, &ceu_sub_width, &ceu_sub_height,
image_mode && V4L2_FIELD_NONE == field);
- dev_geo(dev, "5-9: client scale %d\n", ret);
+ dev_geo(dev, "5-9: client scale return %d\n", ret);
/* Done with the camera. Now see if we can improve the result */
- dev_dbg(dev, "Camera %d fmt %ux%u, requested %ux%u\n",
+ dev_geo(dev, "Camera %d fmt %ux%u, requested %ux%u\n",
ret, mf.width, mf.height, pix->width, pix->height);
if (ret < 0)
return ret;
@@ -1564,40 +1576,44 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
if (mf.code != xlate->code)
return -EINVAL;
+ /* 9. Prepare CEU crop */
+ cam->width = mf.width;
+ cam->height = mf.height;
+
/* 10. Use CEU scaling to scale to the requested user window. */
/* We cannot scale up */
- if (pix->width > mf.width)
- pix->width = mf.width;
- if (pix->width > ceu_rect.width)
- pix->width = ceu_rect.width;
+ if (pix->width > ceu_sub_width)
+ ceu_sub_width = pix->width;
- if (pix->height > mf.height)
- pix->height = mf.height;
- if (pix->height > ceu_rect.height)
- pix->height = ceu_rect.height;
+ if (pix->height > ceu_sub_height)
+ ceu_sub_height = pix->height;
pix->colorspace = mf.colorspace;
if (image_mode) {
/* Scale pix->{width x height} down to width x height */
- scale_h = calc_scale(ceu_rect.width, &pix->width);
- scale_v = calc_scale(ceu_rect.height, &pix->height);
-
- pcdev->cflcr = scale_h | (scale_v << 16);
+ scale_h = calc_scale(ceu_sub_width, &pix->width);
+ scale_v = calc_scale(ceu_sub_height, &pix->height);
} else {
- pix->width = ceu_rect.width;
- pix->height = ceu_rect.height;
- scale_h = scale_v = 0;
- pcdev->cflcr = 0;
+ pix->width = ceu_sub_width;
+ pix->height = ceu_sub_height;
+ scale_h = 0;
+ scale_v = 0;
}
+ pcdev->cflcr = scale_h | (scale_v << 16);
+
+ /*
+ * We have calculated CFLCR, the actual configuration will be performed
+ * in sh_mobile_ceu_set_bus_param()
+ */
+
dev_geo(dev, "10: W: %u : 0x%x = %u, H: %u : 0x%x = %u\n",
- ceu_rect.width, scale_h, pix->width,
- ceu_rect.height, scale_v, pix->height);
+ ceu_sub_width, scale_h, pix->width,
+ ceu_sub_height, scale_v, pix->height);
cam->code = xlate->code;
- cam->ceu_rect = ceu_rect;
icd->current_fmt = xlate;
pcdev->field = field;
@@ -1819,6 +1835,7 @@ static struct soc_camera_host_ops sh_mobile_ceu_host_ops = {
.remove = sh_mobile_ceu_remove_device,
.get_formats = sh_mobile_ceu_get_formats,
.put_formats = sh_mobile_ceu_put_formats,
+ .get_crop = sh_mobile_ceu_get_crop,
.set_crop = sh_mobile_ceu_set_crop,
.set_fmt = sh_mobile_ceu_set_fmt,
.try_fmt = sh_mobile_ceu_try_fmt,