From patchwork Sun Apr 3 05:12:45 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Rich Felker X-Patchwork-Id: 9260559 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id 9665A60865 for ; Wed, 3 Aug 2016 01:30:58 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 89D8928534 for ; Wed, 3 Aug 2016 01:30:58 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 7E6B02853D; Wed, 3 Aug 2016 01:30:58 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-3.5 required=2.0 tests=BAYES_00, DATE_IN_PAST_96_XX, RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id D396F28534 for ; Wed, 3 Aug 2016 01:30:57 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757324AbcHCBa5 (ORCPT ); Tue, 2 Aug 2016 21:30:57 -0400 Received: from 216-12-86-13.cv.mvl.ntelos.net ([216.12.86.13]:59471 "EHLO brightrain.aerifal.cx" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932221AbcHCB3b (ORCPT ); Tue, 2 Aug 2016 21:29:31 -0400 Received: from dalias by brightrain.aerifal.cx with local (Exim 3.15 #2) id 1bUkzw-0006sl-00; Wed, 03 Aug 2016 01:29:28 +0000 Message-Id: In-Reply-To: References: From: Rich Felker Date: Sun, 3 Apr 2016 05:12:45 +0000 Subject: [PATCH v5 2/2] spi: add driver for J-Core SPI controller To: linux-spi@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-sh@vger.kernel.org Cc: Mark Brown , Rob Herring , Mark Rutland Sender: linux-sh-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-sh@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP The J-Core "spi2" device is a PIO-based SPI master controller. It differs from "bitbang" devices in that that it's clocked in hardware rather than via soft clock modulation over gpio, and performs byte-at-a-time transfers between the cpu and SPI controller. This driver will be extended to support future versions of the J-Core SPI controller with DMA transfers when they become available. Signed-off-by: Rich Felker --- drivers/spi/Kconfig | 7 ++ drivers/spi/Makefile | 1 + drivers/spi/spi-jcore.c | 232 ++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 240 insertions(+) create mode 100644 drivers/spi/spi-jcore.c diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index d6fb8d4..1abb3d7 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -285,6 +285,13 @@ config SPI_IMX This enables using the Freescale i.MX SPI controllers in master mode. +config SPI_JCORE + tristate "J-Core SPI Master" + depends on OF && (SUPERH || COMPILE_TEST) + help + This enables support for the SPI master controller in the J-Core + synthesizable, open source SoC. + config SPI_LM70_LLP tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)" depends on PARPORT diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 185367e..8715fec 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_SPI_FSL_SPI) += spi-fsl-spi.o obj-$(CONFIG_SPI_GPIO) += spi-gpio.o obj-$(CONFIG_SPI_IMG_SPFI) += spi-img-spfi.o obj-$(CONFIG_SPI_IMX) += spi-imx.o +obj-$(CONFIG_SPI_JCORE) += spi-jcore.o obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o obj-$(CONFIG_SPI_LP8841_RTC) += spi-lp8841-rtc.o obj-$(CONFIG_SPI_MESON_SPIFC) += spi-meson-spifc.o diff --git a/drivers/spi/spi-jcore.c b/drivers/spi/spi-jcore.c new file mode 100644 index 0000000..7d2044a --- /dev/null +++ b/drivers/spi/spi-jcore.c @@ -0,0 +1,232 @@ +/* + * J-Core SPI controller driver + * + * Copyright (C) 2012-2016 Smart Energy Instruments, Inc. + * + * Current version by Rich Felker + * Based loosely on initial version by Oleksandr G Zhadan + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "jcore_spi" + +#define CTRL_REG 0x0 +#define DATA_REG 0x4 + +#define JCORE_SPI_CTRL_XMIT 0x02 +#define JCORE_SPI_STAT_BUSY 0x02 +#define JCORE_SPI_CTRL_LOOP 0x08 +#define JCORE_SPI_CTRL_CS_BITS 0x15 + +#define JCORE_SPI_WAIT_RDY_MAX_LOOP 2000000 + +struct jcore_spi { + struct spi_master *master; + void __iomem *base; + unsigned int cs_reg; + unsigned int speed_reg; + unsigned int speed_hz; + unsigned int clock_freq; +}; + +static int jcore_spi_wait(void __iomem *ctrl_reg) +{ + unsigned timeout = JCORE_SPI_WAIT_RDY_MAX_LOOP; + + do { + if (!(readl(ctrl_reg) & JCORE_SPI_STAT_BUSY)) + return 0; + cpu_relax(); + } while (--timeout); + + return -EBUSY; +} + +static void jcore_spi_program(struct jcore_spi *hw) +{ + void __iomem *ctrl_reg = hw->base + CTRL_REG; + + if (jcore_spi_wait(ctrl_reg)) + dev_err(hw->master->dev.parent, + "timeout waiting to program ctrl reg.\n"); + + writel(hw->cs_reg | hw->speed_reg, ctrl_reg); +} + +static void jcore_spi_chipsel(struct spi_device *spi, bool value) +{ + struct jcore_spi *hw = spi_master_get_devdata(spi->master); + u32 csbit = 1U << (2 * spi->chip_select); + + dev_dbg(hw->master->dev.parent, "chipselect %d\n", spi->chip_select); + + if (value) + hw->cs_reg |= csbit; + else + hw->cs_reg &= ~csbit; + + jcore_spi_program(hw); +} + +static void jcore_spi_baudrate(struct jcore_spi *hw, int speed) +{ + if (speed == hw->speed_hz) return; + hw->speed_hz = speed; + if (speed >= hw->clock_freq / 2) + hw->speed_reg = 0; + else + hw->speed_reg = ((hw->clock_freq / 2 / speed) - 1) << 27; + jcore_spi_program(hw); + dev_dbg(hw->master->dev.parent, "speed=%d reg=0x%x\n", + speed, hw->speed_reg); +} + +static int jcore_spi_txrx(struct spi_master *master, struct spi_device *spi, + struct spi_transfer *t) +{ + struct jcore_spi *hw = spi_master_get_devdata(master); + + void __iomem *ctrl_reg = hw->base + CTRL_REG; + void __iomem *data_reg = hw->base + DATA_REG; + u32 xmit; + + /* data buffers */ + const unsigned char *tx; + unsigned char *rx; + unsigned int len; + unsigned int count; + + jcore_spi_baudrate(hw, t->speed_hz); + + xmit = hw->cs_reg | hw->speed_reg | JCORE_SPI_CTRL_XMIT; + tx = t->tx_buf; + rx = t->rx_buf; + len = t->len; + + for (count = 0; count < len; count++) { + if (jcore_spi_wait(ctrl_reg)) + break; + + writel(tx ? *tx++ : 0, data_reg); + writel(xmit, ctrl_reg); + + if (jcore_spi_wait(ctrl_reg)) + break; + + if (rx) + *rx++ = readl(data_reg); + } + + spi_finalize_current_transfer(master); + + if (count < len) + return -EREMOTEIO; + + return 0; +} + +static int jcore_spi_probe(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct jcore_spi *hw; + struct spi_master *master; + struct resource *res; + u32 clock_freq; + struct clk *clk; + int err = -ENODEV; + + master = spi_alloc_master(&pdev->dev, sizeof(struct jcore_spi)); + if (!master) + return err; + + /* Setup the master state. */ + master->num_chipselect = 3; + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + master->transfer_one = jcore_spi_txrx; + master->set_cs = jcore_spi_chipsel; + master->dev.of_node = node; + master->bus_num = pdev->id; + + hw = spi_master_get_devdata(master); + hw->master = master; + platform_set_drvdata(pdev, hw); + + /* Find and map our resources */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + goto exit_busy; + if (!devm_request_mem_region(&pdev->dev, res->start, + resource_size(res), pdev->name)) + goto exit_busy; + hw->base = devm_ioremap_nocache(&pdev->dev, res->start, + resource_size(res)); + if (!hw->base) + goto exit_busy; + + /* + * The SPI clock rate controlled via a configurable clock divider + * which is applied to the reference clock. A 50 MHz reference is + * most suitable for obtaining standard SPI clock rates, but some + * designs may have a different reference clock, and the DT must + * make the driver aware so that it can properly program the + * requested rate. If the clock is omitted, 50 MHz is assumed. + */ + clock_freq = 50000000; + clk = devm_clk_get(&pdev->dev, "ref_clk"); + if (!IS_ERR_OR_NULL(clk)) { + if (clk_enable(clk) == 0) + clock_freq = clk_get_rate(clk); + else + dev_warn(&pdev->dev, "could not enable ref_clk\n"); + } + hw->clock_freq = clock_freq; + + /* Initialize all CS bits to high. */ + hw->cs_reg = JCORE_SPI_CTRL_CS_BITS; + jcore_spi_baudrate(hw, 400000); + + /* Register our spi controller */ + err = devm_spi_register_master(&pdev->dev, master); + if (err) + goto exit; + + return 0; + +exit_busy: + err = -EBUSY; +exit: + platform_set_drvdata(pdev, NULL); + spi_master_put(master); + return err; +} + +static const struct of_device_id jcore_spi_of_match[] = { + { .compatible = "jcore,spi2" }, + {}, +}; + +static struct platform_driver jcore_spi_driver = { + .probe = jcore_spi_probe, + .driver = { + .name = DRV_NAME, + .of_match_table = jcore_spi_of_match, + }, +}; + +module_platform_driver(jcore_spi_driver); + +MODULE_DESCRIPTION("J-Core SPI driver"); +MODULE_AUTHOR("Rich Felker "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME);