mbox series

[0/3] pinctrl: Adding support for Microchip serial GPIO controller

Message ID 20200513141134.25819-1-lars.povlsen@microchip.com (mailing list archive)
Headers show
Series pinctrl: Adding support for Microchip serial GPIO controller | expand

Message

Lars Povlsen May 13, 2020, 2:11 p.m. UTC 
This is an add-on series to the main SoC Sparx5 series
(Message-ID: <20200513125532.24585-1-lars.povlsen@microchip.com>).

The series add support for the serial GPIO controller used by Sparx5,
as well as (MSCC) ocelot/jaguar2.

The GPIO controller only supports output mode currently.

It is expected that the DT patches are to be taken directly by the arm-soc
maintainers.

Lars Povlsen (3):
  dt-bindings: pinctrl: Add bindings for mscc,ocelot-sgpio
  pinctrl: mchp-sgpio: Add pinctrl driver for Microsemi Serial GPIO
  arm64: dts: sparx5: Add SGPIO devices

 .../bindings/pinctrl/mscc,ocelot-sgpio.yaml   |  66 ++
 MAINTAINERS                                   |   2 +
 arch/arm64/boot/dts/microchip/sparx5.dtsi     |  52 ++
 .../boot/dts/microchip/sparx5_pcb125.dts      |   5 +
 .../dts/microchip/sparx5_pcb134_board.dtsi    |   5 +
 drivers/pinctrl/Kconfig                       |  17 +
 drivers/pinctrl/Makefile                      |   1 +
 drivers/pinctrl/pinctrl-mchp-sgpio.c          | 569 ++++++++++++++++++
 include/dt-bindings/gpio/mchp-sgpio.h         |  21 +
 9 files changed, 738 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/mscc,ocelot-sgpio.yaml
 create mode 100644 drivers/pinctrl/pinctrl-mchp-sgpio.c
 create mode 100644 include/dt-bindings/gpio/mchp-sgpio.h

--
2.26.2