From patchwork Thu Feb 27 18:22:03 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andre Przywara X-Patchwork-Id: 11409407 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 4A61214D5 for ; Thu, 27 Feb 2020 18:22:33 +0000 (UTC) Received: from web01.groups.io (unknown [66.175.222.12]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 20DE4246A6 for ; Thu, 27 Feb 2020 18:22:33 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=linux.kernel.org header.i=@linux.kernel.org header.b="lWRT4o+C" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 20DE4246A6 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=arm.com Authentication-Results: mail.kernel.org; spf=pass smtp.mailfrom=bounce+26986+1485+1554929+3438807@linux.kernel.org X-Received: by 127.0.0.2 with SMTP id H8uiYY1556264xtP1lugGI00; Thu, 27 Feb 2020 10:22:32 -0800 X-Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by mx.groups.io with SMTP id smtpd.web10.133.1582827752455945676 for ; Thu, 27 Feb 2020 10:22:32 -0800 X-Received: by mail.kernel.org (Postfix) id 4411F246CB; Thu, 27 Feb 2020 18:22:32 +0000 (UTC) X-Received: from foss.arm.com (foss.arm.com [217.140.110.172]) by mail.kernel.org (Postfix) with ESMTP id EDD40246A6; Thu, 27 Feb 2020 18:22:31 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org EDD40246A6 X-Received: from usa-sjc-imap-foss1.foss.arm.com (unknown [10.121.207.14]) by usa-sjc-mx-foss1.foss.arm.com (Postfix) with ESMTP id B79DB30E; Thu, 27 Feb 2020 10:22:31 -0800 (PST) X-Received: from donnerap.arm.com (donnerap.cambridge.arm.com [10.1.197.25]) by usa-sjc-imap-foss1.foss.arm.com (Postfix) with ESMTPSA id F24703F73B; Thu, 27 Feb 2020 10:22:29 -0800 (PST) From: Andre Przywara To: Linuxkernel+Patchwork-Soc via Email Integration Cc: Maxime Ripard , Robert Richter , soc@kernel.org, Jon Loeliger , Mark Langsdorf , Eric Auger , Will Deacon , Catalin Marinas , Jens Axboe Subject: [PATCH v2 06/13] dt-bindings: sata: Convert Calxeda SATA controller to json-schema Date: Thu, 27 Feb 2020 18:22:03 +0000 Message-Id: <20200227182210.89512-7-andre.przywara@arm.com> In-Reply-To: <20200227182210.89512-1-andre.przywara@arm.com> References: <20200227182210.89512-1-andre.przywara@arm.com> Precedence: Bulk List-Unsubscribe: Sender: patchwork-soc@linux.kernel.org List-Id: Mailing-List: list patchwork-soc@linux.kernel.org; contact patchwork-soc+owner@linux.kernel.org Delivered-To: mailing list patchwork-soc@linux.kernel.org Reply-To: patchwork-soc+owner@linux.kernel.org X-Gm-Message-State: zGBQ3bQHH16pBlW68HGJBDdjx1554929AA= DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=linux.kernel.org; q=dns/txt; s=20140610; t=1582827752; bh=Zqkj/RBV4iT63R5GTXi70z5/Bey6bc/B4q1XpAxEFD0=; h=Cc:Date:From:Reply-To:Subject:To; b=lWRT4o+C8Dn/9LZpryBCEYC+9pWtXNcN0HruWwXF2XNujiPL2EQ8IcoKtM91XnFtvL2 nwjuw255zE3IeHsUKAEeZ41+wBswspbs+Ush9QrzBmJFK7+G55a7BQEvohcD/VrIKkhu2 +D/ryTp2LQMO7DlnlDDZvf4rT1a9rEZ64RM= Convert the Calxeda Highbank SATA controller binding to DT schema format using json-schema. Signed-off-by: Andre Przywara Cc: Jens Axboe --- .../devicetree/bindings/ata/sata_highbank.txt | 44 --------- .../bindings/ata/sata_highbank.yaml | 95 +++++++++++++++++++ 2 files changed, 95 insertions(+), 44 deletions(-) delete mode 100644 Documentation/devicetree/bindings/ata/sata_highbank.txt create mode 100644 Documentation/devicetree/bindings/ata/sata_highbank.yaml diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.txt b/Documentation/devicetree/bindings/ata/sata_highbank.txt deleted file mode 100644 index aa83407cb7a4..000000000000 --- a/Documentation/devicetree/bindings/ata/sata_highbank.txt +++ /dev/null @@ -1,44 +0,0 @@ -* Calxeda AHCI SATA Controller - -SATA nodes are defined to describe on-chip Serial ATA controllers. -The Calxeda SATA controller mostly conforms to the AHCI interface -with some special extensions to add functionality. -Each SATA controller should have its own node. - -Required properties: -- compatible : compatible list, contains "calxeda,hb-ahci" -- interrupts : -- reg : - -Optional properties: -- dma-coherent : Present if dma operations are coherent -- calxeda,port-phys : phandle-combophy and lane assignment, which maps each - SATA port to a combophy and a lane within that - combophy -- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off, - which indicates that the driver supports SGPIO - indicator lights using the indicated GPIOs -- calxeda,led-order : a u32 array that map port numbers to offsets within the - SGPIO bitstream. -- calxeda,tx-atten : a u32 array that contains TX attenuation override - codes, one per port. The upper 3 bytes are always - 0 and thus ignored. -- calxeda,pre-clocks : a u32 that indicates the number of additional clock - cycles to transmit before sending an SGPIO pattern -- calxeda,post-clocks: a u32 that indicates the number of additional clock - cycles to transmit after sending an SGPIO pattern - -Example: - sata@ffe08000 { - compatible = "calxeda,hb-ahci"; - reg = <0xffe08000 0x1000>; - interrupts = <115>; - dma-coherent; - calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1 - &combophy0 2 &combophy0 3>; - calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>; - calxeda,led-order = <4 0 1 2 3>; - calxeda,tx-atten = <0xff 22 0xff 0xff 23>; - calxeda,pre-clocks = <10>; - calxeda,post-clocks = <0>; - }; diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.yaml b/Documentation/devicetree/bindings/ata/sata_highbank.yaml new file mode 100644 index 000000000000..6dcf91e1bac0 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/sata_highbank.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/sata_highbank.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Calxeda AHCI SATA Controller + +description: | + The Calxeda SATA controller mostly conforms to the AHCI interface + with some special extensions to add functionality, to map GPIOs for + activity LEDs and for mapping the ComboPHYs. + +maintainers: + - Andre Przywara + +properties: + compatible: + const: calxeda,hb-ahci + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + dma-coherent: true + + calxeda,pre-clocks: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Indicates the number of additional clock cycles to transmit before + sending an SGPIO pattern. + + calxeda,post-clocks: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Indicates the number of additional clock cycles to transmit after + sending an SGPIO pattern. + + calxeda,led-order: + description: Maps port numbers to offsets within the SGPIO bitstream. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 1 + maxItems: 8 + + calxeda,port-phys: + description: | + phandle-combophy and lane assignment, which maps each SATA port to a + combophy and a lane within that combophy + allOf: + - $ref: /schemas/types.yaml#/definitions/phandle-array + - minItems: 1 + maxItems: 8 + + calxeda,tx-atten: + description: | + Contains TX attenuation override codes, one per port. + The upper 24 bits of each entry are always 0 and thus ignored. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 1 + maxItems: 8 + + calxeda,sgpio-gpio: + description: | + phandle-gpio bank, bit offset, and default on or off, which indicates + that the driver supports SGPIO indicator lights using the indicated + GPIOs. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + sata@ffe08000 { + compatible = "calxeda,hb-ahci"; + reg = <0xffe08000 0x1000>; + interrupts = <115>; + dma-coherent; + calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1 + &combophy0 2 &combophy0 3>; + calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>; + calxeda,led-order = <4 0 1 2 3>; + calxeda,tx-atten = <0xff 22 0xff 0xff 23>; + calxeda,pre-clocks = <10>; + calxeda,post-clocks = <0>; + }; + +...