[RFT,04/23] memory: ti-aemif: Rename SS to SSTROBE to avoid name conflicts

Commit Message

Krzysztof Kozlowski July 23, 2020, 7:37 a.m. UTC

SS conflicts with compile test build on i386:

    ../drivers/memory/ti-aemif.c:40:0: warning: "SS" redefined
    In file included from ../arch/x86/include/uapi/asm/ptrace.h:6:0,
                     from ../arch/x86/include/asm/ptrace.h:7,
                     from ../arch/x86/include/asm/math_emu.h:5,
                     from ../arch/x86/include/asm/processor.h:13,
                     from ../include/linux/mutex.h:19,
                     from ../include/linux/notifier.h:14,
                     from ../include/linux/clk.h:14,
                     from ../drivers/memory/ti-aemif.c:12:
    ../arch/x86/include/uapi/asm/ptrace-abi.h:23:0: note: this is the location of the previous definition
     #define SS   16

Use more descriptive name (SSTROBE) to avoid the conflict.

Signed-off-by: Krzysztof Kozlowski <[e-mail]>
---

Please kindly test.

---
 drivers/memory/ti-aemif.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

Patch

diff --git a/drivers/memory/ti-aemif.c b/drivers/memory/ti-aemif.c
index db526dbf71ee..159a16f5e7d6 100644
--- a/drivers/memory/ti-aemif.c
+++ b/drivers/memory/ti-aemif.c
@@ -27,7 +27,7 @@ 
 #define WSTROBE_SHIFT	20
 #define WSETUP_SHIFT	26
 #define EW_SHIFT	30
-#define SS_SHIFT	31
+#define SSTROBE_SHIFT	31
 
 #define TA(x)		((x) << TA_SHIFT)
 #define RHOLD(x)	((x) << RHOLD_SHIFT)
@@ -37,7 +37,7 @@ 
 #define WSTROBE(x)	((x) << WSTROBE_SHIFT)
 #define WSETUP(x)	((x) << WSETUP_SHIFT)
 #define EW(x)		((x) << EW_SHIFT)
-#define SS(x)		((x) << SS_SHIFT)
+#define SSTROBE(x)	((x) << SSTROBE_SHIFT)
 
 #define ASIZE_MAX	0x1
 #define TA_MAX		0x3
@@ -48,7 +48,7 @@ 
 #define WSTROBE_MAX	0x3f
 #define WSETUP_MAX	0xf
 #define EW_MAX		0x1
-#define SS_MAX		0x1
+#define SSTROBE_MAX	0x1
 #define NUM_CS		4
 
 #define TA_VAL(x)	(((x) & TA(TA_MAX)) >> TA_SHIFT)
@@ -59,7 +59,7 @@ 
 #define WSTROBE_VAL(x)	(((x) & WSTROBE(WSTROBE_MAX)) >> WSTROBE_SHIFT)
 #define WSETUP_VAL(x)	(((x) & WSETUP(WSETUP_MAX)) >> WSETUP_SHIFT)
 #define EW_VAL(x)	(((x) & EW(EW_MAX)) >> EW_SHIFT)
-#define SS_VAL(x)	(((x) & SS(SS_MAX)) >> SS_SHIFT)
+#define SSTROBE_VAL(x)	(((x) & SSTROBE(SSTROBE_MAX)) >> SSTROBE_SHIFT)
 
 #define NRCSR_OFFSET	0x00
 #define AWCCR_OFFSET	0x04
@@ -67,7 +67,7 @@ 
 
 #define ACR_ASIZE_MASK	0x3
 #define ACR_EW_MASK	BIT(30)
-#define ACR_SS_MASK	BIT(31)
+#define ACR_SSTROBE_MASK	BIT(31)
 #define ASIZE_16BIT	1
 
 #define CONFIG_MASK	(TA(TA_MAX) | \
@@ -77,7 +77,7 @@ 
 				WHOLD(WHOLD_MAX) | \
 				WSTROBE(WSTROBE_MAX) | \
 				WSETUP(WSETUP_MAX) | \
-				EW(EW_MAX) | SS(SS_MAX) | \
+				EW(EW_MAX) | SSTROBE(SSTROBE_MAX) | \
 				ASIZE_MAX)
 
 /**
@@ -204,7 +204,7 @@  static int aemif_config_abus(struct platform_device *pdev, int csnum)
 	if (data->enable_ew)
 		set |= ACR_EW_MASK;
 	if (data->enable_ss)
-		set |= ACR_SS_MASK;
+		set |= ACR_SSTROBE_MASK;
 
 	val = readl(aemif->base + offset);
 	val &= ~CONFIG_MASK;
@@ -246,7 +246,7 @@  static void aemif_get_hw_params(struct platform_device *pdev, int csnum)
 	data->wstrobe = aemif_cycles_to_nsec(WSTROBE_VAL(val), clk_rate);
 	data->wsetup = aemif_cycles_to_nsec(WSETUP_VAL(val), clk_rate);
 	data->enable_ew = EW_VAL(val);
-	data->enable_ss = SS_VAL(val);
+	data->enable_ss = SSTROBE_VAL(val);
 	data->asize = val & ASIZE_MAX;
 }