diff mbox series

[2/2] arm64: defconfig: Enable ptn5150 extcon driver

Message ID 20200812163342.6547-2-krzk@kernel.org (mailing list archive)
State Superseded
Headers show
Series [1/2] arm64: defconfig: Enable USB gadget with configfs | expand

Commit Message

Krzysztof Kozlowski Aug. 12, 2020, 4:33 p.m. UTC
Enable the extcon driver for NXP PTN5150A chips (CC logic for USB Type-C
applications) present on some of i.MX8 evaluation boards (e.g. Variscite
Symphony board).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

Comments

Krzysztof Kozlowski Aug. 12, 2020, 4:39 p.m. UTC | #1
On Wed, Aug 12, 2020 at 06:33:42PM +0200, Krzysztof Kozlowski wrote:
> Enable the extcon driver for NXP PTN5150A chips (CC logic for USB Type-C
> applications) present on some of i.MX8 evaluation boards (e.g. Variscite
> Symphony board).
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
>  arch/arm64/configs/defconfig | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index 2b02a5a179d7..e2346ad6ba90 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -926,6 +926,7 @@ CONFIG_ARCH_TEGRA_194_SOC=y
>  CONFIG_ARCH_K3_AM6_SOC=y
>  CONFIG_ARCH_K3_J721E_SOC=y
>  CONFIG_TI_SCI_PM_DOMAINS=y
> +CONFIG_EXTCON_PTN5150=y

Ah, this should be a module. Works as =m as well, so either this could
be fixed while applying or I can send a v2.

Best regards,
Krzysztof


>  CONFIG_EXTCON_USB_GPIO=y
>  CONFIG_EXTCON_USBC_CROS_EC=y
>  CONFIG_IIO=y
> -- 
> 2.17.1
>
diff mbox series

Patch

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 2b02a5a179d7..e2346ad6ba90 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -926,6 +926,7 @@  CONFIG_ARCH_TEGRA_194_SOC=y
 CONFIG_ARCH_K3_AM6_SOC=y
 CONFIG_ARCH_K3_J721E_SOC=y
 CONFIG_TI_SCI_PM_DOMAINS=y
+CONFIG_EXTCON_PTN5150=y
 CONFIG_EXTCON_USB_GPIO=y
 CONFIG_EXTCON_USBC_CROS_EC=y
 CONFIG_IIO=y