diff mbox series

[v3,5/6] arm64: dts: lg: Fix SP805 clocks

Message ID 20200907121831.242281-6-andre.przywara@arm.com (mailing list archive)
State Accepted
Commit fc772314a3683ab3f19aa68a660a0f70a8e836a4
Headers show
Series ARM/arm64: dts: Fix SP804/SP805 users | expand

Commit Message

Andre Przywara Sept. 7, 2020, 12:18 p.m. UTC 
The SP805 DT binding requires two clocks to be specified, but the two
LG platform DTs currently only specify one clock.

In practice, Linux would pick a clock named "apb_pclk" for the bus
clock, and the Linux (and U-Boot) SP805 driver would use the first clock
to derive the actual watchdog counter frequency.

Since currently both are the very same clock, we can just double the
clock reference, and add the correct clock-names, to match the binding.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chanho Min <chanho.min@lge.com>
---
 arch/arm64/boot/dts/lg/lg1312.dtsi | 4 ++--
 arch/arm64/boot/dts/lg/lg1313.dtsi | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi
index e2a1564597c8..081fe7a9f605 100644
--- a/arch/arm64/boot/dts/lg/lg1312.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1312.dtsi
@@ -141,8 +141,8 @@ 
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xfd200000 0x1000>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "wdog_clk", "apb_pclk";
 		};
 		uart0: serial@fe000000 {
 			compatible = "arm,pl011", "arm,primecell";
diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi
index a54d14d7ae6f..604bb6975337 100644
--- a/arch/arm64/boot/dts/lg/lg1313.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1313.dtsi
@@ -141,8 +141,8 @@ 
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xfd200000 0x1000>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_bus>;
-			clock-names = "apb_pclk";
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "wdog_clk", "apb_pclk";
 		};
 		uart0: serial@fe000000 {
 			compatible = "arm,pl011", "arm,primecell";