[2/3] ARM: dts: add Webasto ccbv2

Message ID	20201216133501.28135-3-r.czerwinski@pengutronix.de (mailing list archive)
State	Not Applicable
Headers	show Return-Path: <SRS0=dlKc=FU=czerwinskis.de=rouven@kernel.org> DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 2D7FD2255F From: Rouven Czerwinski <r.czerwinski@pengutronix.de> To: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>, soc@kernel.org, Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com> Cc: Rouven Czerwinski <r.czerwinski@pengutronix.de> Subject: [PATCH 2/3] ARM: dts: add Webasto ccbv2 Date: Wed, 16 Dec 2020 14:35:00 +0100 Message-Id: <20201216133501.28135-3-r.czerwinski@pengutronix.de> In-Reply-To: <20201216133501.28135-1-r.czerwinski@pengutronix.de> References: <20201216133501.28135-1-r.czerwinski@pengutronix.de> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit
Series	None \| expand [2/3] ARM: dts: add Webasto ccbv2

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index ce66ffd5a1bb..757e415a7979 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -626,6 +626,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-tx6ul-0010.dtb \ imx6ul-tx6ul-0011.dtb \ imx6ul-tx6ul-mainboard.dtb \ + imx6ul-webasto-ccbV2.dtb \ imx6ull-14x14-evk.dtb \ imx6ull-colibri-eval-v3.dtb \ imx6ull-colibri-wifi-eval-v3.dtb \ diff --git a/arch/arm/boot/dts/imx6ul-webasto-ccbv2.dts b/arch/arm/boot/dts/imx6ul-webasto-ccbv2.dts new file mode 100644 index 000000000000..5c3bca6d2698 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-webasto-ccbv2.dts @@ -0,0 +1,472 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2019, Webasto SE + */ + +/dts-v1/; + +#include "imx6ul.dtsi" + +/ { + model = "Webasto common communication board version 2"; + compatible = "webasto,imx6ul-ccbv2", "fsl,imx6ul"; + + chosen { + stdout-path = &uart7; + }; + + reg_4v: regulator-4v { + compatible = "regulator-fixed"; + regulator-name = "V_+4V"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <4000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_wl18xx_vmmc: regulator-wl18xx { + compatible = "regulator-fixed"; + regulator-name = "wl1837"; + vin-supply = <&reg_4v>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + + reg_dp83822_en: regulator-dp83822 { + compatible = "regulator-fixed"; + regulator-name = "dp83822"; + vin-supply = <&vcc_eth>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-supply = <&reg_dp83822_en>; + phy-handle = <&dp83822i>; + phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + dp83822i: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + pmic: mc34pf3000@8 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + regulators { + sw1a_reg: sw1a { + regulator-name = "V_+3V3_SW1A"; + vin-supply = <&reg_4v>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + vdd_soc_in: sw1b { + regulator-name = "V_+1V4_SW1B"; + vin-supply = <&reg_4v>; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-ramp-delay = <6250>; + regulator-boot-on; + regulator-always-on; + }; + sw2_reg: sw2 { + regulator-name = "V_+3V3_SW2"; + vin-supply = <&reg_4v>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + vcc_ddr3: sw3 { + regulator-name = "V_+1V35_SW3"; + vin-supply = <&reg_4v>; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + swbst_reg: swbst { + regulator-name = "V_+5V0_SWBST"; + vin-supply = <&reg_4v>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + vdd_snvs: vsnvs { + regulator-name = "V_+3V0_SNVS"; + vin-supply = <&reg_4v>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + vrefddr: vrefddr { + regulator-name = "V_+0V675_VREFDDR"; + vin-supply = <&vcc_ddr3>; + regulator-boot-on; + regulator-always-on; + }; + /* 3V3 Supply: i.MX6 modules */ + vgen1_reg: vldo1 { + regulator-name = "V_+3V3_LDO1"; + vin-supply = <&reg_4v>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + vgen2_reg: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + vgen3_reg: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + }; + vdd_high_in: v33 { + regulator-name = "V_+3V3_V33"; + vin-supply = <&reg_4v>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + vcc_eth: vldo3 { + regulator-name = "V_+1V8_LDO3"; + vin-supply = <&reg_4v>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + vgen6_reg: vldo4 { + regulator-name = "V_+1V8_LDO4"; + vin-supply = <&reg_4v>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + cs-gpios = < + &gpio3 26 GPIO_ACTIVE_LOW + &gpio3 10 GPIO_ACTIVE_LOW + &gpio3 12 GPIO_ACTIVE_LOW + >; + status = "okay"; + + cc2520: spi@0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cc2520>; + compatible = "ti,cc2520"; + reg = <0>; + spi-max-frequency = <4000000>; + fifo-gpio = <&gpio3 15 0>; + fifop-gpio = <&gpio3 16 0>; + sfd-gpio = <&gpio3 24 0>; + cca-gpio = <&gpio3 20 0>; + vreg-gpio = <&gpio3 19 0>; + reset-gpio = <&gpio3 23 0>; + vin-supply = <&sw2_reg>; + status = "okay"; + }; + qca7000: spi@1 { + compatible = "qca,qca7000"; + reg = <1>; + spi-max-frequency = <8000000>; + interrupt-parent = <&gpio4>; + interrupts = <16 0x1>; + spi-cpha; + spi-cpol; + status = "okay"; + }; + tfr7970: spi@2 { + compatible = "ti,trf7970a"; + reg = <3>; + spi-max-frequency = <2000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_trf7970>; + interrupt-parent = <&gpio3>; + interrupts = <14 0>; + ti,enable-gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>, <&gpio3 17 GPIO_ACTIVE_HIGH>; + vin-supply = <&reg_4v>; + vdd-io-supply = <&sw2_reg>; + autosuspend-delay = <30000>; + clock-frequency = <27120000>; + status = "okay"; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + uart-has-rtscts; + status = "okay"; + bluetooth { + compatible = "ti,wl1835-st"; + enable-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; + vin-supply = <&reg_4v>; + }; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart7>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + vmmc-supply = <&reg_wl18xx_vmmc>; + non-removable; + keep-power-in-suspend; + cap-power-off-card; + max-frequency = <25000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio4>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; + tcxo-clock-frequency = <26000000>; + }; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <8>; + vmmc-supply = <&sw1a_reg>; + no-1-8-v; + non-removable; + no-sd; + no-sdio; + keep-power-in-suspend; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_minipcie>; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&reg_arm { + vin-supply = <&vdd_soc_in>; + regulator-allow-bypass; +}; + +&reg_soc { + vin-supply = <&vdd_soc_in>; + regulator-allow-bypass; +}; + +&iomuxc { + pinctrl-names = "default"; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x13030 + MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x13030 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x10000 + >; + }; + + pinctrl_minipcie: minipciegrp { + fsl,pins = < + /* HYS=1, 100k PullDown, 50MHz, R0/6 */ + MX6UL_PAD_LCD_HSYNC__GPIO3_IO02 0x13030 + MX6UL_PAD_LCD_VSYNC__GPIO3_IO03 0x13030 + MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x13030 + MX6UL_PAD_LCD_DATA03__GPIO3_IO08 0x13030 + MX6UL_PAD_LCD_DATA04__GPIO3_IO09 0x13030 + >; + }; + + pinctrl_spi1: spi1grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x1b0b0 + MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x1b0b0 + MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x1b0b0 + MX6UL_PAD_LCD_DATA05__GPIO3_IO10 0x17030 + MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x17030 + MX6UL_PAD_LCD_DATA06__GPIO3_IO11 0x17030 + MX6UL_PAD_LCD_DATA13__GPIO3_IO18 0x10030 + >; + }; + + pinctrl_cc2520: cc2520grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA10__GPIO3_IO15 0x13030 + MX6UL_PAD_LCD_DATA11__GPIO3_IO16 0x13030 + MX6UL_PAD_LCD_DATA14__GPIO3_IO19 0x13030 + MX6UL_PAD_LCD_DATA15__GPIO3_IO20 0x13030 + MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x13030 + MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x13030 + MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x17030 + + >; + }; + + pinctrl_trf7970: trf7970grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA07__GPIO3_IO12 0x17030 + MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0x10030 + MX6UL_PAD_LCD_DATA12__GPIO3_IO17 0x10030 + MX6UL_PAD_LCD_DATA09__GPIO3_IO14 0x17000 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6UL_PAD_NAND_READY_B__UART3_DCE_TX 0x1b0b0 + MX6UL_PAD_NAND_CE0_B__UART3_DCE_RX 0x1b0b0 + MX6UL_PAD_NAND_CE1_B__UART3_DCE_CTS 0x1b0b0 + MX6UL_PAD_NAND_CLE__UART3_DCE_RTS 0x1b0b0 + MX6UL_PAD_LCD_DATA08__GPIO3_IO13 0x13030 + MX6UL_PAD_NAND_WP_B__GPIO4_IO11 0x13030 + MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x13030 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x1b0b0 + MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX 0x1b0b0 + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x1b0b0 + MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x1b0b0 + MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS 0x1b0b0 + MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x10030 + MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x00010 + >; + }; + + pinctrl_uart7: uart7grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x1b0b0 + MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x10059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x10059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x10059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x10059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x10059 + MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x17000 + MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x10030 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100e9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x100e9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x100e9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x100e9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x100e9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x100e9 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x100e9 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x100e9 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x100e9 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x100e9 + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x10030 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B 0x00b0 + >; + }; +};

[2/3] ARM: dts: add Webasto ccbv2

Commit Message

Patch