diff mbox series

[RFT,09/11] arm64: dts: intel: socfpga_agilex: align node names with dtschema

Message ID 20210210171823.333802-9-krzk@kernel.org (mailing list archive)
State RFC
Headers show
Series [01/11] arm64: defconfig: enable Intel's eASIC N5X SoCFPGA and Keem Bay SoC | expand

Commit Message

Krzysztof Kozlowski Feb. 10, 2021, 5:18 p.m. UTC 
Align the NAND, GIC and UART node names with dtschema to silence
dtbs_check warnings like:

    arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dt.yaml:
        intc@fffc1000: $nodename:0: 'intc@fffc1000' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
    arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dt.yaml:
        serial0@ffc02000: $nodename:0: 'serial0@ffc02000' does not match '^serial(@[0-9a-f,]+)*$'

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm64/boot/dts/intel/socfpga_agilex.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
index 8e6ba1c06938..860a80c4258f 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
@@ -78,7 +78,7 @@  psci {
 		method = "smc";
 	};
 
-	intc: intc@fffc1000 {
+	intc: interrupt-controller@fffc1000 {
 		compatible = "arm,gic-400", "arm,cortex-a15-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
@@ -316,7 +316,7 @@  mmc: dwmmc0@ff808000 {
 			status = "disabled";
 		};
 
-		nand: nand@ffb90000 {
+		nand: nand-controller@ffb90000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "altr,socfpga-denali-nand";
@@ -479,7 +479,7 @@  timer3: timer3@ffd00100 {
 			clock-names = "timer";
 		};
 
-		uart0: serial0@ffc02000 {
+		uart0: serial@ffc02000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xffc02000 0x100>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
@@ -490,7 +490,7 @@  uart0: serial0@ffc02000 {
 			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
 		};
 
-		uart1: serial1@ffc02100 {
+		uart1: serial@ffc02100 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xffc02100 0x100>;
 			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;