mbox series

[GIT,PULL] Qualcomm DTS more changes for v5.16

Message ID 20211026135855.1205262-1-bjorn.andersson@linaro.org (mailing list archive)
State Mainlined
Headers show
Series [GIT,PULL] Qualcomm DTS more changes for v5.16 | expand

Pull-request

https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-dts-for-5.16-2

Message

Bjorn Andersson Oct. 26, 2021, 1:58 p.m. UTC
The following changes since commit 9304af37d07b63244e4b3c80e5a245c978beb015:

  dt-bindings: arm: qcom, add missing devices (2021-09-19 23:33:06 -0500)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-dts-for-5.16-2

for you to fetch changes up to 036e6c9f0336f50532ad6bedfaebf01856168a1d:

  ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node (2021-10-24 18:45:29 -0500)

----------------------------------------------------------------
Qualcomm DTS more changes for v5.16

The multi-purpose-pin (MPP) driver is finally migrated to use
hierarchical IRQ domains, so this bring the associated changes.

The remainder of the changes are correcting binding issues, primarily
found through DT validation.

----------------------------------------------------------------
David Heidelberg (9):
      ARM: dts: qcom: mdm9615: fix memory node for Sierra Wireless WP8548
      dt-bindings: arm: qcom-ipq4019: add missing device compatible
      ARM: dts: ipq4019-ap.dk01.1-c1: add device compatible in the dts
      dt-bindings: arm: qcom: Fix Nexus 4 vendor prefix
      ARM: dts: qcom: fix memory and mdio nodes naming for RB3011
      ARM: dts: qcom: correct mmc node naming
      ARM: dts: qcom: fix flash node naming for RB3011
      ARM: dts: qcom: fix thermal zones naming
      ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node

Dmitry Baryshkov (14):
      ARM: dts: qcom-apq8064: stop using legacy clock names for HDMI
      ARM: dts: qcom-apq8064: add gpio-ranges to mpps nodes
      ARM: dts: qcom-msm8660: add gpio-ranges to mpps nodes
      ARM: dts: qcom-pm8841: add gpio-ranges to mpps nodes
      ARM: dts: qcom-pm8941: add gpio-ranges to mpps nodes
      ARM: dts: qcom-pma8084: add gpio-ranges to mpps nodes
      ARM: dts: qcom-mdm9615: add gpio-ranges to mpps node, fix its name
      ARM: dts: qcom-apq8060-dragonboard: fix mpps state names
      ARM: dts: qcom-apq8064: add interrupt controller properties
      ARM: dts: qcom-mdm9615: add interrupt controller properties
      ARM: dts: qcom-msm8660: add interrupt controller properties
      ARM: dts: qcom-pm8841: add interrupt controller properties
      ARM: dts: qcom-pm8941: add interrupt controller properties
      ARM: dts: qcom-pma8084: add interrupt controller properties

Luca Weiss (2):
      dt-bindings: arm: qcom: rename vendor of apq8026-lenok
      ARM: dts: qcom: apq8026-lg-lenok: rename board vendor

Shawn Guo (1):
      ARM: dts: qcom: sdx55: Drop '#clock-cells' from QMP PHY node

 Documentation/devicetree/bindings/arm/qcom.yaml    |  5 ++-
 arch/arm/boot/dts/Makefile                         |  2 +-
 ...026-lge-lenok.dts => qcom-apq8026-lg-lenok.dts} |  2 +-
 arch/arm/boot/dts/qcom-apq8060-dragonboard.dts     | 10 ++---
 arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts |  2 +-
 arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts        |  6 +--
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts         |  6 +--
 .../arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts |  4 +-
 arch/arm/boot/dts/qcom-apq8064.dtsi                | 45 ++++++++--------------
 arch/arm/boot/dts/qcom-apq8084.dtsi                |  8 ++--
 arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts    |  2 +-
 arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi      |  1 -
 arch/arm/boot/dts/qcom-ipq8064-rb3011.dts          |  8 ++--
 arch/arm/boot/dts/qcom-ipq8064.dtsi                | 26 ++++++-------
 arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi         |  2 +-
 arch/arm/boot/dts/qcom-mdm9615.dtsi                | 16 +++-----
 arch/arm/boot/dts/qcom-msm8660-surf.dts            |  4 +-
 arch/arm/boot/dts/qcom-msm8660.dtsi                | 27 ++++---------
 arch/arm/boot/dts/qcom-msm8960-cdp.dts             |  4 +-
 arch/arm/boot/dts/qcom-msm8960.dtsi                |  4 +-
 arch/arm/boot/dts/qcom-msm8974.dtsi                | 12 +++---
 arch/arm/boot/dts/qcom-pm8841.dtsi                 |  7 ++--
 arch/arm/boot/dts/qcom-pm8941.dtsi                 | 11 ++----
 arch/arm/boot/dts/qcom-pma8084.dtsi                | 11 ++----
 arch/arm/boot/dts/qcom-sdx55.dtsi                  |  1 -
 25 files changed, 94 insertions(+), 132 deletions(-)
 rename arch/arm/boot/dts/{qcom-apq8026-lge-lenok.dts => qcom-apq8026-lg-lenok.dts} (99%)