| Message ID | 20221106154826.6687-11-andre.przywara@arm.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | ARM: suniv: USB and PopStick board support | expand |
于 2022年11月6日 GMT+08:00 下午11:48:25, Andre Przywara <andre.przywara@arm.com> 写到: >So far we were assigning some crude "type" (SoC name, really) to each >Allwinner USB PHY model, then guarding certain quirks based on this. >This does not only look weird, but gets more or more cumbersome to >maintain. > >Remove the bogus type names altogether, instead introduce flags for each >quirk, and explicitly check for them. >This improves readability, and simplifies future extensions. > >Signed-off-by: Andre Przywara <andre.przywara@arm.com> >--- > drivers/phy/allwinner/phy-sun4i-usb.c | 50 ++++++++------------------- > 1 file changed, 15 insertions(+), 35 deletions(-) > >diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c >index 51fb24c6dcb3..422129c66282 100644 >--- a/drivers/phy/allwinner/phy-sun4i-usb.c >+++ b/drivers/phy/allwinner/phy-sun4i-usb.c >@@ -99,27 +99,17 @@ > #define DEBOUNCE_TIME msecs_to_jiffies(50) > #define POLL_TIME msecs_to_jiffies(250) > >-enum sun4i_usb_phy_type { >- sun4i_a10_phy, >- sun6i_a31_phy, >- sun8i_a33_phy, >- sun8i_a83t_phy, >- sun8i_h3_phy, >- sun8i_r40_phy, >- sun8i_v3s_phy, >- sun50i_a64_phy, >- sun50i_h6_phy, >-}; >- > struct sun4i_usb_phy_cfg { > int num_phys; > int hsic_index; >- enum sun4i_usb_phy_type type; > u32 disc_thresh; > u32 hci_phy_ctl_clear; > u8 phyctl_offset; > bool dedicated_clocks; > bool phy0_dual_route; >+ bool phy2_is_hsic; Maybe use a `int hsic_phy` instead? But the problem is this practice is assuming USB0 could not be HSIC -- although USB0 is usually OTG. >+ bool siddq_in_base; >+ bool poll_vbusen; > int missing_phys; > }; > >@@ -251,7 +241,7 @@ static void sun4i_usb_phy_passby(struct sun4i_usb_phy *phy, int enable) > SUNXI_AHB_INCRX_ALIGN_EN | SUNXI_ULPI_BYPASS_EN; > > /* A83T USB2 is HSIC */ >- if (phy_data->cfg->type == sun8i_a83t_phy && phy->index == 2) >+ if (phy_data->cfg->phy2_is_hsic && phy->index == 2) > bits |= SUNXI_EHCI_HS_FORCE | SUNXI_HSIC_CONNECT_INT | > SUNXI_HSIC; > >@@ -295,8 +285,7 @@ static int sun4i_usb_phy_init(struct phy *_phy) > writel(val, phy->pmu + REG_HCI_PHY_CTL); > } > >- if (data->cfg->type == sun8i_a83t_phy || >- data->cfg->type == sun50i_h6_phy) { >+ if (data->cfg->siddq_in_base) { > if (phy->index == 0) { > val = readl(data->base + data->cfg->phyctl_offset); > val |= PHY_CTL_VBUSVLDEXT; >@@ -340,8 +329,7 @@ static int sun4i_usb_phy_exit(struct phy *_phy) > struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy); > > if (phy->index == 0) { >- if (data->cfg->type == sun8i_a83t_phy || >- data->cfg->type == sun50i_h6_phy) { >+ if (data->cfg->siddq_in_base) { > void __iomem *phyctl = data->base + > data->cfg->phyctl_offset; > >@@ -414,9 +402,8 @@ static bool sun4i_usb_phy0_poll(struct sun4i_usb_phy_data *data) > * vbus using the N_VBUSEN pin on the pmic, so we must poll > * when using the pmic for vbus-det _and_ we're driving vbus. > */ >- if ((data->cfg->type == sun6i_a31_phy || >- data->cfg->type == sun8i_a33_phy) && >- data->vbus_power_supply && data->phys[0].regulator_on) >+ if (data->cfg->poll_vbusen && data->vbus_power_supply && >+ data->phys[0].regulator_on) > return true; > > return false; >@@ -861,7 +848,6 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) > > static const struct sun4i_usb_phy_cfg suniv_f1c100s_cfg = { > .num_phys = 1, >- .type = sun4i_a10_phy, > .disc_thresh = 3, > .phyctl_offset = REG_PHYCTL_A10, > .dedicated_clocks = true, >@@ -869,7 +855,6 @@ static const struct sun4i_usb_phy_cfg suniv_f1c100s_cfg = { > > static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = { > .num_phys = 3, >- .type = sun4i_a10_phy, > .disc_thresh = 3, > .phyctl_offset = REG_PHYCTL_A10, > .dedicated_clocks = false, >@@ -877,7 +862,6 @@ static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = { > > static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = { > .num_phys = 2, >- .type = sun4i_a10_phy, > .disc_thresh = 2, > .phyctl_offset = REG_PHYCTL_A10, > .dedicated_clocks = false, >@@ -885,15 +869,14 @@ static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = { > > static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = { > .num_phys = 3, >- .type = sun6i_a31_phy, > .disc_thresh = 3, > .phyctl_offset = REG_PHYCTL_A10, > .dedicated_clocks = true, >+ .poll_vbusen = true, > }; > > static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = { > .num_phys = 3, >- .type = sun4i_a10_phy, > .disc_thresh = 2, > .phyctl_offset = REG_PHYCTL_A10, > .dedicated_clocks = false, >@@ -901,31 +884,31 @@ static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = { > > static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = { > .num_phys = 2, >- .type = sun6i_a31_phy, > .disc_thresh = 3, > .phyctl_offset = REG_PHYCTL_A10, > .dedicated_clocks = true, >+ .poll_vbusen = true, > }; > > static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = { > .num_phys = 2, >- .type = sun8i_a33_phy, > .disc_thresh = 3, > .phyctl_offset = REG_PHYCTL_A33, > .dedicated_clocks = true, >+ .poll_vbusen = true, > }; > > static const struct sun4i_usb_phy_cfg sun8i_a83t_cfg = { > .num_phys = 3, > .hsic_index = 2, >- .type = sun8i_a83t_phy, > .phyctl_offset = REG_PHYCTL_A33, > .dedicated_clocks = true, >+ .siddq_in_base = true, >+ .phy2_is_hsic = true, > }; > > static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = { > .num_phys = 4, >- .type = sun8i_h3_phy, > .disc_thresh = 3, > .phyctl_offset = REG_PHYCTL_A33, > .dedicated_clocks = true, >@@ -935,7 +918,6 @@ static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = { > > static const struct sun4i_usb_phy_cfg sun8i_r40_cfg = { > .num_phys = 3, >- .type = sun8i_r40_phy, > .disc_thresh = 3, > .phyctl_offset = REG_PHYCTL_A33, > .dedicated_clocks = true, >@@ -945,7 +927,6 @@ static const struct sun4i_usb_phy_cfg sun8i_r40_cfg = { > > static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = { > .num_phys = 1, >- .type = sun8i_v3s_phy, > .disc_thresh = 3, > .phyctl_offset = REG_PHYCTL_A33, > .dedicated_clocks = true, >@@ -955,16 +936,15 @@ static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = { > > static const struct sun4i_usb_phy_cfg sun20i_d1_cfg = { > .num_phys = 2, >- .type = sun50i_h6_phy, > .phyctl_offset = REG_PHYCTL_A33, > .dedicated_clocks = true, > .hci_phy_ctl_clear = PHY_CTL_SIDDQ, > .phy0_dual_route = true, >+ .siddq_in_base = true, > }; > > static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = { > .num_phys = 2, >- .type = sun50i_a64_phy, > .disc_thresh = 3, > .phyctl_offset = REG_PHYCTL_A33, > .dedicated_clocks = true, >@@ -974,11 +954,11 @@ static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = { > > static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = { > .num_phys = 4, >- .type = sun50i_h6_phy, > .phyctl_offset = REG_PHYCTL_A33, > .dedicated_clocks = true, > .phy0_dual_route = true, > .missing_phys = BIT(1) | BIT(2), >+ .siddq_in_base = true, > }; > > static const struct of_device_id sun4i_usb_phy_of_match[] = {
Dne nedelja, 06. november 2022 ob 16:48:25 CET je Andre Przywara napisal(a): > So far we were assigning some crude "type" (SoC name, really) to each > Allwinner USB PHY model, then guarding certain quirks based on this. > This does not only look weird, but gets more or more cumbersome to > maintain. > > Remove the bogus type names altogether, instead introduce flags for each > quirk, and explicitly check for them. > This improves readability, and simplifies future extensions. > > Signed-off-by: Andre Przywara <andre.przywara@arm.com> Thanks for working on that, nice cleanup! Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Best regards, Jernej
On 06-11-22, 23:54, Icenowy Zheng wrote: > > > 于 2022年11月6日 GMT+08:00 下午11:48:25, Andre Przywara <andre.przywara@arm.com> 写到: > >So far we were assigning some crude "type" (SoC name, really) to each > >Allwinner USB PHY model, then guarding certain quirks based on this. > >This does not only look weird, but gets more or more cumbersome to > >maintain. > > > >Remove the bogus type names altogether, instead introduce flags for each > >quirk, and explicitly check for them. > >This improves readability, and simplifies future extensions. > > > >Signed-off-by: Andre Przywara <andre.przywara@arm.com> > >--- > > drivers/phy/allwinner/phy-sun4i-usb.c | 50 ++++++++------------------- > > 1 file changed, 15 insertions(+), 35 deletions(-) > > > >diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c > >index 51fb24c6dcb3..422129c66282 100644 > >--- a/drivers/phy/allwinner/phy-sun4i-usb.c > >+++ b/drivers/phy/allwinner/phy-sun4i-usb.c > >@@ -99,27 +99,17 @@ > > #define DEBOUNCE_TIME msecs_to_jiffies(50) > > #define POLL_TIME msecs_to_jiffies(250) > > > >-enum sun4i_usb_phy_type { > >- sun4i_a10_phy, > >- sun6i_a31_phy, > >- sun8i_a33_phy, > >- sun8i_a83t_phy, > >- sun8i_h3_phy, > >- sun8i_r40_phy, > >- sun8i_v3s_phy, > >- sun50i_a64_phy, > >- sun50i_h6_phy, > >-}; > >- > > struct sun4i_usb_phy_cfg { > > int num_phys; > > int hsic_index; > >- enum sun4i_usb_phy_type type; > > u32 disc_thresh; > > u32 hci_phy_ctl_clear; > > u8 phyctl_offset; > > bool dedicated_clocks; > > bool phy0_dual_route; > >+ bool phy2_is_hsic; > > Maybe use a `int hsic_phy` instead? But the problem is this practice is > assuming USB0 could not be HSIC -- although USB0 is usually OTG. why should it be int.. dont think hsic_phy is improvement over phy2_is_hsic? > > >+ bool siddq_in_base; > >+ bool poll_vbusen; > > int missing_phys; > > }; > > > >@@ -251,7 +241,7 @@ static void sun4i_usb_phy_passby(struct sun4i_usb_phy *phy, int enable) > > SUNXI_AHB_INCRX_ALIGN_EN | SUNXI_ULPI_BYPASS_EN; > > > > /* A83T USB2 is HSIC */ > >- if (phy_data->cfg->type == sun8i_a83t_phy && phy->index == 2) > >+ if (phy_data->cfg->phy2_is_hsic && phy->index == 2) > > bits |= SUNXI_EHCI_HS_FORCE | SUNXI_HSIC_CONNECT_INT | > > SUNXI_HSIC; > > > >@@ -295,8 +285,7 @@ static int sun4i_usb_phy_init(struct phy *_phy) > > writel(val, phy->pmu + REG_HCI_PHY_CTL); > > } > > > >- if (data->cfg->type == sun8i_a83t_phy || > >- data->cfg->type == sun50i_h6_phy) { > >+ if (data->cfg->siddq_in_base) { > > if (phy->index == 0) { > > val = readl(data->base + data->cfg->phyctl_offset); > > val |= PHY_CTL_VBUSVLDEXT; > >@@ -340,8 +329,7 @@ static int sun4i_usb_phy_exit(struct phy *_phy) > > struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy); > > > > if (phy->index == 0) { > >- if (data->cfg->type == sun8i_a83t_phy || > >- data->cfg->type == sun50i_h6_phy) { > >+ if (data->cfg->siddq_in_base) { > > void __iomem *phyctl = data->base + > > data->cfg->phyctl_offset; > > > >@@ -414,9 +402,8 @@ static bool sun4i_usb_phy0_poll(struct sun4i_usb_phy_data *data) > > * vbus using the N_VBUSEN pin on the pmic, so we must poll > > * when using the pmic for vbus-det _and_ we're driving vbus. > > */ > >- if ((data->cfg->type == sun6i_a31_phy || > >- data->cfg->type == sun8i_a33_phy) && > >- data->vbus_power_supply && data->phys[0].regulator_on) > >+ if (data->cfg->poll_vbusen && data->vbus_power_supply && > >+ data->phys[0].regulator_on) > > return true; > > > > return false; > >@@ -861,7 +848,6 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) > > > > static const struct sun4i_usb_phy_cfg suniv_f1c100s_cfg = { > > .num_phys = 1, > >- .type = sun4i_a10_phy, > > .disc_thresh = 3, > > .phyctl_offset = REG_PHYCTL_A10, > > .dedicated_clocks = true, > >@@ -869,7 +855,6 @@ static const struct sun4i_usb_phy_cfg suniv_f1c100s_cfg = { > > > > static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = { > > .num_phys = 3, > >- .type = sun4i_a10_phy, > > .disc_thresh = 3, > > .phyctl_offset = REG_PHYCTL_A10, > > .dedicated_clocks = false, > >@@ -877,7 +862,6 @@ static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = { > > > > static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = { > > .num_phys = 2, > >- .type = sun4i_a10_phy, > > .disc_thresh = 2, > > .phyctl_offset = REG_PHYCTL_A10, > > .dedicated_clocks = false, > >@@ -885,15 +869,14 @@ static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = { > > > > static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = { > > .num_phys = 3, > >- .type = sun6i_a31_phy, > > .disc_thresh = 3, > > .phyctl_offset = REG_PHYCTL_A10, > > .dedicated_clocks = true, > >+ .poll_vbusen = true, > > }; > > > > static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = { > > .num_phys = 3, > >- .type = sun4i_a10_phy, > > .disc_thresh = 2, > > .phyctl_offset = REG_PHYCTL_A10, > > .dedicated_clocks = false, > >@@ -901,31 +884,31 @@ static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = { > > > > static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = { > > .num_phys = 2, > >- .type = sun6i_a31_phy, > > .disc_thresh = 3, > > .phyctl_offset = REG_PHYCTL_A10, > > .dedicated_clocks = true, > >+ .poll_vbusen = true, > > }; > > > > static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = { > > .num_phys = 2, > >- .type = sun8i_a33_phy, > > .disc_thresh = 3, > > .phyctl_offset = REG_PHYCTL_A33, > > .dedicated_clocks = true, > >+ .poll_vbusen = true, > > }; > > > > static const struct sun4i_usb_phy_cfg sun8i_a83t_cfg = { > > .num_phys = 3, > > .hsic_index = 2, > >- .type = sun8i_a83t_phy, > > .phyctl_offset = REG_PHYCTL_A33, > > .dedicated_clocks = true, > >+ .siddq_in_base = true, > >+ .phy2_is_hsic = true, > > }; > > > > static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = { > > .num_phys = 4, > >- .type = sun8i_h3_phy, > > .disc_thresh = 3, > > .phyctl_offset = REG_PHYCTL_A33, > > .dedicated_clocks = true, > >@@ -935,7 +918,6 @@ static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = { > > > > static const struct sun4i_usb_phy_cfg sun8i_r40_cfg = { > > .num_phys = 3, > >- .type = sun8i_r40_phy, > > .disc_thresh = 3, > > .phyctl_offset = REG_PHYCTL_A33, > > .dedicated_clocks = true, > >@@ -945,7 +927,6 @@ static const struct sun4i_usb_phy_cfg sun8i_r40_cfg = { > > > > static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = { > > .num_phys = 1, > >- .type = sun8i_v3s_phy, > > .disc_thresh = 3, > > .phyctl_offset = REG_PHYCTL_A33, > > .dedicated_clocks = true, > >@@ -955,16 +936,15 @@ static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = { > > > > static const struct sun4i_usb_phy_cfg sun20i_d1_cfg = { > > .num_phys = 2, > >- .type = sun50i_h6_phy, > > .phyctl_offset = REG_PHYCTL_A33, > > .dedicated_clocks = true, > > .hci_phy_ctl_clear = PHY_CTL_SIDDQ, > > .phy0_dual_route = true, > >+ .siddq_in_base = true, > > }; > > > > static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = { > > .num_phys = 2, > >- .type = sun50i_a64_phy, > > .disc_thresh = 3, > > .phyctl_offset = REG_PHYCTL_A33, > > .dedicated_clocks = true, > >@@ -974,11 +954,11 @@ static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = { > > > > static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = { > > .num_phys = 4, > >- .type = sun50i_h6_phy, > > .phyctl_offset = REG_PHYCTL_A33, > > .dedicated_clocks = true, > > .phy0_dual_route = true, > > .missing_phys = BIT(1) | BIT(2), > >+ .siddq_in_base = true, > > }; > > > > static const struct of_device_id sun4i_usb_phy_of_match[] = {
在 2022-11-10星期四的 13:04 +0530，Vinod Koul写道： > On 06-11-22, 23:54, Icenowy Zheng wrote: > > > > > > 于 2022年11月6日 GMT+08:00 下午11:48:25, Andre Przywara > > <andre.przywara@arm.com> 写到: > > > So far we were assigning some crude "type" (SoC name, really) to > > > each > > > Allwinner USB PHY model, then guarding certain quirks based on > > > this. > > > This does not only look weird, but gets more or more cumbersome > > > to > > > maintain. > > > > > > Remove the bogus type names altogether, instead introduce flags > > > for each > > > quirk, and explicitly check for them. > > > This improves readability, and simplifies future extensions. > > > > > > Signed-off-by: Andre Przywara <andre.przywara@arm.com> > > > --- > > > drivers/phy/allwinner/phy-sun4i-usb.c | 50 ++++++++-------------- > > > ----- > > > 1 file changed, 15 insertions(+), 35 deletions(-) > > > > > > diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c > > > b/drivers/phy/allwinner/phy-sun4i-usb.c > > > index 51fb24c6dcb3..422129c66282 100644 > > > --- a/drivers/phy/allwinner/phy-sun4i-usb.c > > > +++ b/drivers/phy/allwinner/phy-sun4i-usb.c > > > @@ -99,27 +99,17 @@ > > > #define DEBOUNCE_TIME msecs_to_jiffies(50) > > > #define POLL_TIME msecs_to_jiffies(250) > > > > > > -enum sun4i_usb_phy_type { > > > - sun4i_a10_phy, > > > - sun6i_a31_phy, > > > - sun8i_a33_phy, > > > - sun8i_a83t_phy, > > > - sun8i_h3_phy, > > > - sun8i_r40_phy, > > > - sun8i_v3s_phy, > > > - sun50i_a64_phy, > > > - sun50i_h6_phy, > > > -}; > > > - > > > struct sun4i_usb_phy_cfg { > > > int num_phys; > > > int hsic_index; > > > - enum sun4i_usb_phy_type type; > > > u32 disc_thresh; > > > u32 hci_phy_ctl_clear; > > > u8 phyctl_offset; > > > bool dedicated_clocks; > > > bool phy0_dual_route; > > > + bool phy2_is_hsic; > > > > Maybe use a `int hsic_phy` instead? But the problem is this > > practice is > > assuming USB0 could not be HSIC -- although USB0 is usually OTG. > > why should it be int.. dont think hsic_phy is improvement over > phy2_is_hsic? Yes because it may express phy1_is_hsic, etc (although this kind of thing hadn't happened yet). > > > > > > + bool siddq_in_base; > > > + bool poll_vbusen; > > > int missing_phys; > > > }; > > > > > > @@ -251,7 +241,7 @@ static void sun4i_usb_phy_passby(struct > > > sun4i_usb_phy *phy, int enable) > > > SUNXI_AHB_INCRX_ALIGN_EN | SUNXI_ULPI_BYPASS_EN; > > > > > > /* A83T USB2 is HSIC */ > > > - if (phy_data->cfg->type == sun8i_a83t_phy && phy->index > > > == 2) > > > + if (phy_data->cfg->phy2_is_hsic && phy->index == 2) > > > bits |= SUNXI_EHCI_HS_FORCE | > > > SUNXI_HSIC_CONNECT_INT | > > > SUNXI_HSIC; > > > > > > @@ -295,8 +285,7 @@ static int sun4i_usb_phy_init(struct phy > > > *_phy) > > > writel(val, phy->pmu + REG_HCI_PHY_CTL); > > > } > > > > > > - if (data->cfg->type == sun8i_a83t_phy || > > > - data->cfg->type == sun50i_h6_phy) { > > > + if (data->cfg->siddq_in_base) { > > > if (phy->index == 0) { > > > val = readl(data->base + data->cfg- > > > >phyctl_offset); > > > val |= PHY_CTL_VBUSVLDEXT; > > > @@ -340,8 +329,7 @@ static int sun4i_usb_phy_exit(struct phy > > > *_phy) > > > struct sun4i_usb_phy_data *data = > > > to_sun4i_usb_phy_data(phy); > > > > > > if (phy->index == 0) { > > > - if (data->cfg->type == sun8i_a83t_phy || > > > - data->cfg->type == sun50i_h6_phy) { > > > + if (data->cfg->siddq_in_base) { > > > void __iomem *phyctl = data->base + > > > data->cfg->phyctl_offset; > > > > > > @@ -414,9 +402,8 @@ static bool sun4i_usb_phy0_poll(struct > > > sun4i_usb_phy_data *data) > > > * vbus using the N_VBUSEN pin on the pmic, so we must > > > poll > > > * when using the pmic for vbus-det _and_ we're driving > > > vbus. > > > */ > > > - if ((data->cfg->type == sun6i_a31_phy || > > > - data->cfg->type == sun8i_a33_phy) && > > > - data->vbus_power_supply && data- > > > >phys[0].regulator_on) > > > + if (data->cfg->poll_vbusen && data->vbus_power_supply && > > > + data->phys[0].regulator_on) > > > return true; > > > > > > return false; > > > @@ -861,7 +848,6 @@ static int sun4i_usb_phy_probe(struct > > > platform_device *pdev) > > > > > > static const struct sun4i_usb_phy_cfg suniv_f1c100s_cfg = { > > > .num_phys = 1, > > > - .type = sun4i_a10_phy, > > > .disc_thresh = 3, > > > .phyctl_offset = REG_PHYCTL_A10, > > > .dedicated_clocks = true, > > > @@ -869,7 +855,6 @@ static const struct sun4i_usb_phy_cfg > > > suniv_f1c100s_cfg = { > > > > > > static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = { > > > .num_phys = 3, > > > - .type = sun4i_a10_phy, > > > .disc_thresh = 3, > > > .phyctl_offset = REG_PHYCTL_A10, > > > .dedicated_clocks = false, > > > @@ -877,7 +862,6 @@ static const struct sun4i_usb_phy_cfg > > > sun4i_a10_cfg = { > > > > > > static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = { > > > .num_phys = 2, > > > - .type = sun4i_a10_phy, > > > .disc_thresh = 2, > > > .phyctl_offset = REG_PHYCTL_A10, > > > .dedicated_clocks = false, > > > @@ -885,15 +869,14 @@ static const struct sun4i_usb_phy_cfg > > > sun5i_a13_cfg = { > > > > > > static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = { > > > .num_phys = 3, > > > - .type = sun6i_a31_phy, > > > .disc_thresh = 3, > > > .phyctl_offset = REG_PHYCTL_A10, > > > .dedicated_clocks = true, > > > + .poll_vbusen = true, > > > }; > > > > > > static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = { > > > .num_phys = 3, > > > - .type = sun4i_a10_phy, > > > .disc_thresh = 2, > > > .phyctl_offset = REG_PHYCTL_A10, > > > .dedicated_clocks = false, > > > @@ -901,31 +884,31 @@ static const struct sun4i_usb_phy_cfg > > > sun7i_a20_cfg = { > > > > > > static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = { > > > .num_phys = 2, > > > - .type = sun6i_a31_phy, > > > .disc_thresh = 3, > > > .phyctl_offset = REG_PHYCTL_A10, > > > .dedicated_clocks = true, > > > + .poll_vbusen = true, > > > }; > > > > > > static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = { > > > .num_phys = 2, > > > - .type = sun8i_a33_phy, > > > .disc_thresh = 3, > > > .phyctl_offset = REG_PHYCTL_A33, > > > .dedicated_clocks = true, > > > + .poll_vbusen = true, > > > }; > > > > > > static const struct sun4i_usb_phy_cfg sun8i_a83t_cfg = { > > > .num_phys = 3, > > > .hsic_index = 2, > > > - .type = sun8i_a83t_phy, > > > .phyctl_offset = REG_PHYCTL_A33, > > > .dedicated_clocks = true, > > > + .siddq_in_base = true, > > > + .phy2_is_hsic = true, > > > }; > > > > > > static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = { > > > .num_phys = 4, > > > - .type = sun8i_h3_phy, > > > .disc_thresh = 3, > > > .phyctl_offset = REG_PHYCTL_A33, > > > .dedicated_clocks = true, > > > @@ -935,7 +918,6 @@ static const struct sun4i_usb_phy_cfg > > > sun8i_h3_cfg = { > > > > > > static const struct sun4i_usb_phy_cfg sun8i_r40_cfg = { > > > .num_phys = 3, > > > - .type = sun8i_r40_phy, > > > .disc_thresh = 3, > > > .phyctl_offset = REG_PHYCTL_A33, > > > .dedicated_clocks = true, > > > @@ -945,7 +927,6 @@ static const struct sun4i_usb_phy_cfg > > > sun8i_r40_cfg = { > > > > > > static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = { > > > .num_phys = 1, > > > - .type = sun8i_v3s_phy, > > > .disc_thresh = 3, > > > .phyctl_offset = REG_PHYCTL_A33, > > > .dedicated_clocks = true, > > > @@ -955,16 +936,15 @@ static const struct sun4i_usb_phy_cfg > > > sun8i_v3s_cfg = { > > > > > > static const struct sun4i_usb_phy_cfg sun20i_d1_cfg = { > > > .num_phys = 2, > > > - .type = sun50i_h6_phy, > > > .phyctl_offset = REG_PHYCTL_A33, > > > .dedicated_clocks = true, > > > .hci_phy_ctl_clear = PHY_CTL_SIDDQ, > > > .phy0_dual_route = true, > > > + .siddq_in_base = true, > > > }; > > > > > > static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = { > > > .num_phys = 2, > > > - .type = sun50i_a64_phy, > > > .disc_thresh = 3, > > > .phyctl_offset = REG_PHYCTL_A33, > > > .dedicated_clocks = true, > > > @@ -974,11 +954,11 @@ static const struct sun4i_usb_phy_cfg > > > sun50i_a64_cfg = { > > > > > > static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = { > > > .num_phys = 4, > > > - .type = sun50i_h6_phy, > > > .phyctl_offset = REG_PHYCTL_A33, > > > .dedicated_clocks = true, > > > .phy0_dual_route = true, > > > .missing_phys = BIT(1) | BIT(2), > > > + .siddq_in_base = true, > > > }; > > > > > > static const struct of_device_id sun4i_usb_phy_of_match[] = { >
On Thu, 10 Nov 2022 19:40:58 +0800 Icenowy Zheng <uwu@icenowy.me> wrote: Hi, > 在 2022-11-10星期四的 13:04 +0530，Vinod Koul写道： > > On 06-11-22, 23:54, Icenowy Zheng wrote: > > > > > > > > > 于 2022年11月6日 GMT+08:00 下午11:48:25, Andre Przywara > > > <andre.przywara@arm.com> 写到: > > > > So far we were assigning some crude "type" (SoC name, really) to > > > > each > > > > Allwinner USB PHY model, then guarding certain quirks based on > > > > this. > > > > This does not only look weird, but gets more or more cumbersome > > > > to > > > > maintain. > > > > > > > > Remove the bogus type names altogether, instead introduce flags > > > > for each > > > > quirk, and explicitly check for them. > > > > This improves readability, and simplifies future extensions. > > > > > > > > Signed-off-by: Andre Przywara <andre.przywara@arm.com> > > > > --- > > > > drivers/phy/allwinner/phy-sun4i-usb.c | 50 ++++++++-------------- > > > > ----- > > > > 1 file changed, 15 insertions(+), 35 deletions(-) > > > > > > > > diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c > > > > b/drivers/phy/allwinner/phy-sun4i-usb.c > > > > index 51fb24c6dcb3..422129c66282 100644 > > > > --- a/drivers/phy/allwinner/phy-sun4i-usb.c > > > > +++ b/drivers/phy/allwinner/phy-sun4i-usb.c > > > > @@ -99,27 +99,17 @@ > > > > #define DEBOUNCE_TIME msecs_to_jiffies(50) > > > > #define POLL_TIME msecs_to_jiffies(250) > > > > > > > > -enum sun4i_usb_phy_type { > > > > - sun4i_a10_phy, > > > > - sun6i_a31_phy, > > > > - sun8i_a33_phy, > > > > - sun8i_a83t_phy, > > > > - sun8i_h3_phy, > > > > - sun8i_r40_phy, > > > > - sun8i_v3s_phy, > > > > - sun50i_a64_phy, > > > > - sun50i_h6_phy, > > > > -}; > > > > - > > > > struct sun4i_usb_phy_cfg { > > > > int num_phys; > > > > int hsic_index; > > > > - enum sun4i_usb_phy_type type; > > > > u32 disc_thresh; > > > > u32 hci_phy_ctl_clear; > > > > u8 phyctl_offset; > > > > bool dedicated_clocks; > > > > bool phy0_dual_route; > > > > + bool phy2_is_hsic; > > > > > > Maybe use a `int hsic_phy` instead? But the problem is this > > > practice is > > > assuming USB0 could not be HSIC -- although USB0 is usually OTG. > > > > why should it be int.. dont think hsic_phy is improvement over > > phy2_is_hsic? > > Yes because it may express phy1_is_hsic, etc (although this kind of > thing hadn't happened yet). Yeah, I tried to not interpret too much into this, instead just named it as it is used today. I don't have any insight into the A83T PHY or in Allwinner's plans regarding this. So far this seems like a one-off hack that is needed for this particular PHY on this particular SoC. It it code-internal anyway, so we can change it at any time later should the need arise. If people like another name better, I am of course happy to use that. Cheers, Andre > > > > > > > > > > + bool siddq_in_base; > > > > + bool poll_vbusen; > > > > int missing_phys; > > > > }; > > > > > > > > @@ -251,7 +241,7 @@ static void sun4i_usb_phy_passby(struct > > > > sun4i_usb_phy *phy, int enable) > > > > SUNXI_AHB_INCRX_ALIGN_EN | SUNXI_ULPI_BYPASS_EN; > > > > > > > > /* A83T USB2 is HSIC */ > > > > - if (phy_data->cfg->type == sun8i_a83t_phy && phy->index > > > > == 2) > > > > + if (phy_data->cfg->phy2_is_hsic && phy->index == 2) > > > > bits |= SUNXI_EHCI_HS_FORCE | > > > > SUNXI_HSIC_CONNECT_INT | > > > > SUNXI_HSIC; > > > > > > > > @@ -295,8 +285,7 @@ static int sun4i_usb_phy_init(struct phy > > > > *_phy) > > > > writel(val, phy->pmu + REG_HCI_PHY_CTL); > > > > } > > > > > > > > - if (data->cfg->type == sun8i_a83t_phy || > > > > - data->cfg->type == sun50i_h6_phy) { > > > > + if (data->cfg->siddq_in_base) { > > > > if (phy->index == 0) { > > > > val = readl(data->base + data->cfg- > > > > >phyctl_offset); > > > > val |= PHY_CTL_VBUSVLDEXT; > > > > @@ -340,8 +329,7 @@ static int sun4i_usb_phy_exit(struct phy > > > > *_phy) > > > > struct sun4i_usb_phy_data *data = > > > > to_sun4i_usb_phy_data(phy); > > > > > > > > if (phy->index == 0) { > > > > - if (data->cfg->type == sun8i_a83t_phy || > > > > - data->cfg->type == sun50i_h6_phy) { > > > > + if (data->cfg->siddq_in_base) { > > > > void __iomem *phyctl = data->base + > > > > data->cfg->phyctl_offset; > > > > > > > > @@ -414,9 +402,8 @@ static bool sun4i_usb_phy0_poll(struct > > > > sun4i_usb_phy_data *data) > > > > * vbus using the N_VBUSEN pin on the pmic, so we must > > > > poll > > > > * when using the pmic for vbus-det _and_ we're driving > > > > vbus. > > > > */ > > > > - if ((data->cfg->type == sun6i_a31_phy || > > > > - data->cfg->type == sun8i_a33_phy) && > > > > - data->vbus_power_supply && data- > > > > >phys[0].regulator_on) > > > > + if (data->cfg->poll_vbusen && data->vbus_power_supply && > > > > + data->phys[0].regulator_on) > > > > return true; > > > > > > > > return false; > > > > @@ -861,7 +848,6 @@ static int sun4i_usb_phy_probe(struct > > > > platform_device *pdev) > > > > > > > > static const struct sun4i_usb_phy_cfg suniv_f1c100s_cfg = { > > > > .num_phys = 1, > > > > - .type = sun4i_a10_phy, > > > > .disc_thresh = 3, > > > > .phyctl_offset = REG_PHYCTL_A10, > > > > .dedicated_clocks = true, > > > > @@ -869,7 +855,6 @@ static const struct sun4i_usb_phy_cfg > > > > suniv_f1c100s_cfg = { > > > > > > > > static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = { > > > > .num_phys = 3, > > > > - .type = sun4i_a10_phy, > > > > .disc_thresh = 3, > > > > .phyctl_offset = REG_PHYCTL_A10, > > > > .dedicated_clocks = false, > > > > @@ -877,7 +862,6 @@ static const struct sun4i_usb_phy_cfg > > > > sun4i_a10_cfg = { > > > > > > > > static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = { > > > > .num_phys = 2, > > > > - .type = sun4i_a10_phy, > > > > .disc_thresh = 2, > > > > .phyctl_offset = REG_PHYCTL_A10, > > > > .dedicated_clocks = false, > > > > @@ -885,15 +869,14 @@ static const struct sun4i_usb_phy_cfg > > > > sun5i_a13_cfg = { > > > > > > > > static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = { > > > > .num_phys = 3, > > > > - .type = sun6i_a31_phy, > > > > .disc_thresh = 3, > > > > .phyctl_offset = REG_PHYCTL_A10, > > > > .dedicated_clocks = true, > > > > + .poll_vbusen = true, > > > > }; > > > > > > > > static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = { > > > > .num_phys = 3, > > > > - .type = sun4i_a10_phy, > > > > .disc_thresh = 2, > > > > .phyctl_offset = REG_PHYCTL_A10, > > > > .dedicated_clocks = false, > > > > @@ -901,31 +884,31 @@ static const struct sun4i_usb_phy_cfg > > > > sun7i_a20_cfg = { > > > > > > > > static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = { > > > > .num_phys = 2, > > > > - .type = sun6i_a31_phy, > > > > .disc_thresh = 3, > > > > .phyctl_offset = REG_PHYCTL_A10, > > > > .dedicated_clocks = true, > > > > + .poll_vbusen = true, > > > > }; > > > > > > > > static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = { > > > > .num_phys = 2, > > > > - .type = sun8i_a33_phy, > > > > .disc_thresh = 3, > > > > .phyctl_offset = REG_PHYCTL_A33, > > > > .dedicated_clocks = true, > > > > + .poll_vbusen = true, > > > > }; > > > > > > > > static const struct sun4i_usb_phy_cfg sun8i_a83t_cfg = { > > > > .num_phys = 3, > > > > .hsic_index = 2, > > > > - .type = sun8i_a83t_phy, > > > > .phyctl_offset = REG_PHYCTL_A33, > > > > .dedicated_clocks = true, > > > > + .siddq_in_base = true, > > > > + .phy2_is_hsic = true, > > > > }; > > > > > > > > static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = { > > > > .num_phys = 4, > > > > - .type = sun8i_h3_phy, > > > > .disc_thresh = 3, > > > > .phyctl_offset = REG_PHYCTL_A33, > > > > .dedicated_clocks = true, > > > > @@ -935,7 +918,6 @@ static const struct sun4i_usb_phy_cfg > > > > sun8i_h3_cfg = { > > > > > > > > static const struct sun4i_usb_phy_cfg sun8i_r40_cfg = { > > > > .num_phys = 3, > > > > - .type = sun8i_r40_phy, > > > > .disc_thresh = 3, > > > > .phyctl_offset = REG_PHYCTL_A33, > > > > .dedicated_clocks = true, > > > > @@ -945,7 +927,6 @@ static const struct sun4i_usb_phy_cfg > > > > sun8i_r40_cfg = { > > > > > > > > static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = { > > > > .num_phys = 1, > > > > - .type = sun8i_v3s_phy, > > > > .disc_thresh = 3, > > > > .phyctl_offset = REG_PHYCTL_A33, > > > > .dedicated_clocks = true, > > > > @@ -955,16 +936,15 @@ static const struct sun4i_usb_phy_cfg > > > > sun8i_v3s_cfg = { > > > > > > > > static const struct sun4i_usb_phy_cfg sun20i_d1_cfg = { > > > > .num_phys = 2, > > > > - .type = sun50i_h6_phy, > > > > .phyctl_offset = REG_PHYCTL_A33, > > > > .dedicated_clocks = true, > > > > .hci_phy_ctl_clear = PHY_CTL_SIDDQ, > > > > .phy0_dual_route = true, > > > > + .siddq_in_base = true, > > > > }; > > > > > > > > static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = { > > > > .num_phys = 2, > > > > - .type = sun50i_a64_phy, > > > > .disc_thresh = 3, > > > > .phyctl_offset = REG_PHYCTL_A33, > > > > .dedicated_clocks = true, > > > > @@ -974,11 +954,11 @@ static const struct sun4i_usb_phy_cfg > > > > sun50i_a64_cfg = { > > > > > > > > static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = { > > > > .num_phys = 4, > > > > - .type = sun50i_h6_phy, > > > > .phyctl_offset = REG_PHYCTL_A33, > > > > .dedicated_clocks = true, > > > > .phy0_dual_route = true, > > > > .missing_phys = BIT(1) | BIT(2), > > > > + .siddq_in_base = true, > > > > }; > > > > > > > > static const struct of_device_id sun4i_usb_phy_of_match[] = { > > >
On 11/6/22 09:54, Icenowy Zheng wrote: > > > 于 2022年11月6日 GMT+08:00 下午11:48:25, Andre Przywara <andre.przywara@arm.com> 写到: >> So far we were assigning some crude "type" (SoC name, really) to each >> Allwinner USB PHY model, then guarding certain quirks based on this. >> This does not only look weird, but gets more or more cumbersome to >> maintain. >> >> Remove the bogus type names altogether, instead introduce flags for each >> quirk, and explicitly check for them. >> This improves readability, and simplifies future extensions. >> >> Signed-off-by: Andre Przywara <andre.przywara@arm.com> >> --- >> drivers/phy/allwinner/phy-sun4i-usb.c | 50 ++++++++------------------- >> 1 file changed, 15 insertions(+), 35 deletions(-) >> >> diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c >> index 51fb24c6dcb3..422129c66282 100644 >> --- a/drivers/phy/allwinner/phy-sun4i-usb.c >> +++ b/drivers/phy/allwinner/phy-sun4i-usb.c >> @@ -99,27 +99,17 @@ >> #define DEBOUNCE_TIME msecs_to_jiffies(50) >> #define POLL_TIME msecs_to_jiffies(250) >> >> -enum sun4i_usb_phy_type { >> - sun4i_a10_phy, >> - sun6i_a31_phy, >> - sun8i_a33_phy, >> - sun8i_a83t_phy, >> - sun8i_h3_phy, >> - sun8i_r40_phy, >> - sun8i_v3s_phy, >> - sun50i_a64_phy, >> - sun50i_h6_phy, >> -}; >> - >> struct sun4i_usb_phy_cfg { >> int num_phys; >> int hsic_index; >> - enum sun4i_usb_phy_type type; >> u32 disc_thresh; >> u32 hci_phy_ctl_clear; >> u8 phyctl_offset; >> bool dedicated_clocks; >> bool phy0_dual_route; >> + bool phy2_is_hsic; > > Maybe use a `int hsic_phy` instead? But the problem is this practice is > assuming USB0 could not be HSIC -- although USB0 is usually OTG. There is already a `hsic_index` variable in the struct we can use. Regards, Samuel
On Sun, 13 Nov 2022 17:52:33 -0600 Samuel Holland <samuel@sholland.org> wrote: > On 11/6/22 09:54, Icenowy Zheng wrote: > > > > > > 于 2022年11月6日 GMT+08:00 下午11:48:25, Andre Przywara <andre.przywara@arm.com> 写到: > >> So far we were assigning some crude "type" (SoC name, really) to each > >> Allwinner USB PHY model, then guarding certain quirks based on this. > >> This does not only look weird, but gets more or more cumbersome to > >> maintain. > >> > >> Remove the bogus type names altogether, instead introduce flags for each > >> quirk, and explicitly check for them. > >> This improves readability, and simplifies future extensions. > >> > >> Signed-off-by: Andre Przywara <andre.przywara@arm.com> > >> --- > >> drivers/phy/allwinner/phy-sun4i-usb.c | 50 ++++++++------------------- > >> 1 file changed, 15 insertions(+), 35 deletions(-) > >> > >> diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c > >> index 51fb24c6dcb3..422129c66282 100644 > >> --- a/drivers/phy/allwinner/phy-sun4i-usb.c > >> +++ b/drivers/phy/allwinner/phy-sun4i-usb.c > >> @@ -99,27 +99,17 @@ > >> #define DEBOUNCE_TIME msecs_to_jiffies(50) > >> #define POLL_TIME msecs_to_jiffies(250) > >> > >> -enum sun4i_usb_phy_type { > >> - sun4i_a10_phy, > >> - sun6i_a31_phy, > >> - sun8i_a33_phy, > >> - sun8i_a83t_phy, > >> - sun8i_h3_phy, > >> - sun8i_r40_phy, > >> - sun8i_v3s_phy, > >> - sun50i_a64_phy, > >> - sun50i_h6_phy, > >> -}; > >> - > >> struct sun4i_usb_phy_cfg { > >> int num_phys; > >> int hsic_index; > >> - enum sun4i_usb_phy_type type; > >> u32 disc_thresh; > >> u32 hci_phy_ctl_clear; > >> u8 phyctl_offset; > >> bool dedicated_clocks; > >> bool phy0_dual_route; > >> + bool phy2_is_hsic; > > > > Maybe use a `int hsic_phy` instead? But the problem is this practice is > > assuming USB0 could not be HSIC -- although USB0 is usually OTG. > > There is already a `hsic_index` variable in the struct we can use. Ha, indeed, good find! And we are already checking for the same condition (is this the HSIC port?) using this variable. Saves one more member in the struct. Thanks! Andre > > Regards, > Samuel > >
diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c index 51fb24c6dcb3..422129c66282 100644 --- a/drivers/phy/allwinner/phy-sun4i-usb.c +++ b/drivers/phy/allwinner/phy-sun4i-usb.c @@ -99,27 +99,17 @@ #define DEBOUNCE_TIME msecs_to_jiffies(50) #define POLL_TIME msecs_to_jiffies(250) -enum sun4i_usb_phy_type { - sun4i_a10_phy, - sun6i_a31_phy, - sun8i_a33_phy, - sun8i_a83t_phy, - sun8i_h3_phy, - sun8i_r40_phy, - sun8i_v3s_phy, - sun50i_a64_phy, - sun50i_h6_phy, -}; - struct sun4i_usb_phy_cfg { int num_phys; int hsic_index; - enum sun4i_usb_phy_type type; u32 disc_thresh; u32 hci_phy_ctl_clear; u8 phyctl_offset; bool dedicated_clocks; bool phy0_dual_route; + bool phy2_is_hsic; + bool siddq_in_base; + bool poll_vbusen; int missing_phys; }; @@ -251,7 +241,7 @@ static void sun4i_usb_phy_passby(struct sun4i_usb_phy *phy, int enable) SUNXI_AHB_INCRX_ALIGN_EN | SUNXI_ULPI_BYPASS_EN; /* A83T USB2 is HSIC */ - if (phy_data->cfg->type == sun8i_a83t_phy && phy->index == 2) + if (phy_data->cfg->phy2_is_hsic && phy->index == 2) bits |= SUNXI_EHCI_HS_FORCE | SUNXI_HSIC_CONNECT_INT | SUNXI_HSIC; @@ -295,8 +285,7 @@ static int sun4i_usb_phy_init(struct phy *_phy) writel(val, phy->pmu + REG_HCI_PHY_CTL); } - if (data->cfg->type == sun8i_a83t_phy || - data->cfg->type == sun50i_h6_phy) { + if (data->cfg->siddq_in_base) { if (phy->index == 0) { val = readl(data->base + data->cfg->phyctl_offset); val |= PHY_CTL_VBUSVLDEXT; @@ -340,8 +329,7 @@ static int sun4i_usb_phy_exit(struct phy *_phy) struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy); if (phy->index == 0) { - if (data->cfg->type == sun8i_a83t_phy || - data->cfg->type == sun50i_h6_phy) { + if (data->cfg->siddq_in_base) { void __iomem *phyctl = data->base + data->cfg->phyctl_offset; @@ -414,9 +402,8 @@ static bool sun4i_usb_phy0_poll(struct sun4i_usb_phy_data *data) * vbus using the N_VBUSEN pin on the pmic, so we must poll * when using the pmic for vbus-det _and_ we're driving vbus. */ - if ((data->cfg->type == sun6i_a31_phy || - data->cfg->type == sun8i_a33_phy) && - data->vbus_power_supply && data->phys[0].regulator_on) + if (data->cfg->poll_vbusen && data->vbus_power_supply && + data->phys[0].regulator_on) return true; return false; @@ -861,7 +848,6 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) static const struct sun4i_usb_phy_cfg suniv_f1c100s_cfg = { .num_phys = 1, - .type = sun4i_a10_phy, .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A10, .dedicated_clocks = true, @@ -869,7 +855,6 @@ static const struct sun4i_usb_phy_cfg suniv_f1c100s_cfg = { static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = { .num_phys = 3, - .type = sun4i_a10_phy, .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A10, .dedicated_clocks = false, @@ -877,7 +862,6 @@ static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = { static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = { .num_phys = 2, - .type = sun4i_a10_phy, .disc_thresh = 2, .phyctl_offset = REG_PHYCTL_A10, .dedicated_clocks = false, @@ -885,15 +869,14 @@ static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = { static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = { .num_phys = 3, - .type = sun6i_a31_phy, .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A10, .dedicated_clocks = true, + .poll_vbusen = true, }; static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = { .num_phys = 3, - .type = sun4i_a10_phy, .disc_thresh = 2, .phyctl_offset = REG_PHYCTL_A10, .dedicated_clocks = false, @@ -901,31 +884,31 @@ static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = { static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = { .num_phys = 2, - .type = sun6i_a31_phy, .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A10, .dedicated_clocks = true, + .poll_vbusen = true, }; static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = { .num_phys = 2, - .type = sun8i_a33_phy, .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A33, .dedicated_clocks = true, + .poll_vbusen = true, }; static const struct sun4i_usb_phy_cfg sun8i_a83t_cfg = { .num_phys = 3, .hsic_index = 2, - .type = sun8i_a83t_phy, .phyctl_offset = REG_PHYCTL_A33, .dedicated_clocks = true, + .siddq_in_base = true, + .phy2_is_hsic = true, }; static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = { .num_phys = 4, - .type = sun8i_h3_phy, .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A33, .dedicated_clocks = true, @@ -935,7 +918,6 @@ static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = { static const struct sun4i_usb_phy_cfg sun8i_r40_cfg = { .num_phys = 3, - .type = sun8i_r40_phy, .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A33, .dedicated_clocks = true, @@ -945,7 +927,6 @@ static const struct sun4i_usb_phy_cfg sun8i_r40_cfg = { static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = { .num_phys = 1, - .type = sun8i_v3s_phy, .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A33, .dedicated_clocks = true, @@ -955,16 +936,15 @@ static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = { static const struct sun4i_usb_phy_cfg sun20i_d1_cfg = { .num_phys = 2, - .type = sun50i_h6_phy, .phyctl_offset = REG_PHYCTL_A33, .dedicated_clocks = true, .hci_phy_ctl_clear = PHY_CTL_SIDDQ, .phy0_dual_route = true, + .siddq_in_base = true, }; static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = { .num_phys = 2, - .type = sun50i_a64_phy, .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A33, .dedicated_clocks = true, @@ -974,11 +954,11 @@ static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = { static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = { .num_phys = 4, - .type = sun50i_h6_phy, .phyctl_offset = REG_PHYCTL_A33, .dedicated_clocks = true, .phy0_dual_route = true, .missing_phys = BIT(1) | BIT(2), + .siddq_in_base = true, }; static const struct of_device_id sun4i_usb_phy_of_match[] = {
So far we were assigning some crude "type" (SoC name, really) to each Allwinner USB PHY model, then guarding certain quirks based on this. This does not only look weird, but gets more or more cumbersome to maintain. Remove the bogus type names altogether, instead introduce flags for each quirk, and explicitly check for them. This improves readability, and simplifies future extensions. Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- drivers/phy/allwinner/phy-sun4i-usb.c | 50 ++++++++------------------- 1 file changed, 15 insertions(+), 35 deletions(-)