From patchwork Fri Mar 31 08:34:54 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Neil Armstrong X-Patchwork-Id: 13195510 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 41BA9C6FD18 for ; Fri, 31 Mar 2023 08:35:19 +0000 (UTC) Received: by smtp.kernel.org (Postfix) id E428FC433A8; Fri, 31 Mar 2023 08:35:18 +0000 (UTC) Received: from mail-wr1-f50.google.com (mail-wr1-f50.google.com [209.85.221.50]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.kernel.org (Postfix) with ESMTPS id 23F0AC43442 for ; Fri, 31 Mar 2023 08:35:07 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.1 smtp.kernel.org 23F0AC43442 Authentication-Results: smtp.kernel.org; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: smtp.kernel.org; spf=pass smtp.mailfrom=linaro.org Received: by mail-wr1-f50.google.com with SMTP id t4so16350012wra.7 for ; Fri, 31 Mar 2023 01:35:07 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1680251706; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=sR14Pzk1ZWPhY5OD69Rj27prrk3LKbGiHay2FBxMcv4=; b=Fty/aJcYkFZEKr2metM5EqkEKq17l5gJGQix+tZCxMOlAKB1AMO/oIkTZt9URAowwf RWICJqsjkouqcMT9vmE8IfKQP/DHvv9UkXQRhxf1Q+mimQtH5cxG/PhbPnk9w1TLrlYA AT8hUgqpZZAhjexFXTVWXk7iDen88KQTq1xUn9G6YnJTv4noraV6PymxxUwt1fBqooou HQcSuX+pCi41nBC6SYZ0CEIxhTt/9F6IwxjYEtO3fybv47zKTSc43Sy/DwIzgnv6/5km N5ydK4H27c9gO2NPO/42s0zygtKswLo05pSB9tKxjIogSH3waXuYQbnc4SyFxThsFPss UMTw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; t=1680251706; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=sR14Pzk1ZWPhY5OD69Rj27prrk3LKbGiHay2FBxMcv4=; b=JOIqspzzHerRIjpQrSDePMxFCCk3JALOH39E5+1aUq+4xQxcY9gIVV5qZasO4WrYhi FJskfk1MvcJcgEusdT76i3Q1qOGVKdiyWEN/sRDcQ+hKidsDidi+u7RrkSV8z6Nw4YLu ffbAaYCbaBXAz9zaKtYDcltv9bEC8nbeW/NhR/VTpP/X8qBaziIuaHSIBSxKePLoDn6C UAmOPdtdEXL4YQXQstkFz/9ucgkgOHhvndIK6DOUDW7EnhBhAn5ZkkcSpl+peaIIs7Rs Qq2d/8HgnMQp3DQYqmZ2wYfW/bCwpRlGhCtg2VeOzGwLYt622JSRGe6aCsVX7LrL1a+J Q7pA== X-Gm-Message-State: AAQBX9dCepO5Bcan2vtl9GvPbV46x2Lx1t8D33nYDgMoQPUhiU8ek/jo 0Q2zNhm2TwJGAtW92OPw8FyQTQ== X-Google-Smtp-Source: AKy350YkNKUXMSjTTKKpy6c26g6vAz/W5xiVHdg7Pfywz18Z1jB2OllrAaU4jJjzL55BSkouJUd0zA== X-Received: by 2002:adf:ed8c:0:b0:2cf:e868:f781 with SMTP id c12-20020adfed8c000000b002cfe868f781mr18949949wro.42.1680251706543; Fri, 31 Mar 2023 01:35:06 -0700 (PDT) Received: from arrakeen.starnux.net ([2a01:e0a:982:cbb0:8261:5fff:fe11:bdda]) by smtp.gmail.com with ESMTPSA id e11-20020a5d4e8b000000b002cde626cd96sm1563153wru.65.2023.03.31.01.35.05 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 31 Mar 2023 01:35:06 -0700 (PDT) From: Neil Armstrong Date: Fri, 31 Mar 2023 10:34:54 +0200 Subject: [PATCH RFC 16/20] power: reset: oxnas-restart: remove obsolete restart driver MIME-Version: 1.0 Message-Id: <20230331-topic-oxnas-upstream-remove-v1-16-5bd58fd1dd1f@linaro.org> References: <20230331-topic-oxnas-upstream-remove-v1-0-5bd58fd1dd1f@linaro.org> In-Reply-To: <20230331-topic-oxnas-upstream-remove-v1-0-5bd58fd1dd1f@linaro.org> List-Id: To: Arnd Bergmann , Olof Johansson , soc@kernel.org, Rob Herring , Krzysztof Kozlowski , Russell King , Michael Turquette , Stephen Boyd , Daniel Lezcano , Thomas Gleixner , Miquel Raynal , Richard Weinberger , Vignesh Raghavendra , Giuseppe Cavallaro , Alexandre Torgue , Jose Abreu , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Maxime Coquelin , Linus Walleij , Bartosz Golaszewski , Sebastian Reichel , Philipp Zabel , Marc Zyngier Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org, linux-mtd@lists.infradead.org, netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-gpio@vger.kernel.org, linux-pm@vger.kernel.org, Neil Armstrong X-Mailer: b4 0.12.1 Due to lack of maintainance and stall of development for a few years now, and since no new features will ever be added upstream, remove support for OX810 and OX820 restart feature. Signed-off-by: Neil Armstrong Acked-by: Sebastian Reichel --- drivers/power/reset/Kconfig | 7 -- drivers/power/reset/Makefile | 1 - drivers/power/reset/oxnas-restart.c | 233 ------------------------------------ 3 files changed, 241 deletions(-) diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index 8c87eeda0fec..cc734c1fe4c0 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -148,13 +148,6 @@ config POWER_RESET_ODROID_GO_ULTRA_POWEROFF help This driver supports Power off for Odroid Go Ultra device. -config POWER_RESET_OXNAS - bool "OXNAS SoC restart driver" - depends on ARCH_OXNAS - default MACH_OX820 - help - Restart support for OXNAS/PLXTECH OX820 SoC. - config POWER_RESET_PIIX4_POWEROFF tristate "Intel PIIX4 power-off driver" depends on PCI diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile index d763e6735ee3..a95d1bd275d1 100644 --- a/drivers/power/reset/Makefile +++ b/drivers/power/reset/Makefile @@ -14,7 +14,6 @@ obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o obj-$(CONFIG_POWER_RESET_LINKSTATION) += linkstation-poweroff.o obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o obj-$(CONFIG_POWER_RESET_MT6323) += mt6323-poweroff.o -obj-$(CONFIG_POWER_RESET_OXNAS) += oxnas-restart.o obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o obj-$(CONFIG_POWER_RESET_ODROID_GO_ULTRA_POWEROFF) += odroid-go-ultra-poweroff.o diff --git a/drivers/power/reset/oxnas-restart.c b/drivers/power/reset/oxnas-restart.c deleted file mode 100644 index 13090bec058a..000000000000 --- a/drivers/power/reset/oxnas-restart.c +++ /dev/null @@ -1,233 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0) -/* - * oxnas SoC reset driver - * based on: - * Microsemi MIPS SoC reset driver - * and ox820_assert_system_reset() written by Ma Hajun - * - * Copyright (c) 2013 Ma Hajun - * Copyright (c) 2017 Microsemi Corporation - * Copyright (c) 2020 Daniel Golle - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* bit numbers of reset control register */ -#define OX820_SYS_CTRL_RST_SCU 0 -#define OX820_SYS_CTRL_RST_COPRO 1 -#define OX820_SYS_CTRL_RST_ARM0 2 -#define OX820_SYS_CTRL_RST_ARM1 3 -#define OX820_SYS_CTRL_RST_USBHS 4 -#define OX820_SYS_CTRL_RST_USBHSPHYA 5 -#define OX820_SYS_CTRL_RST_MACA 6 -#define OX820_SYS_CTRL_RST_MAC OX820_SYS_CTRL_RST_MACA -#define OX820_SYS_CTRL_RST_PCIEA 7 -#define OX820_SYS_CTRL_RST_SGDMA 8 -#define OX820_SYS_CTRL_RST_CIPHER 9 -#define OX820_SYS_CTRL_RST_DDR 10 -#define OX820_SYS_CTRL_RST_SATA 11 -#define OX820_SYS_CTRL_RST_SATA_LINK 12 -#define OX820_SYS_CTRL_RST_SATA_PHY 13 -#define OX820_SYS_CTRL_RST_PCIEPHY 14 -#define OX820_SYS_CTRL_RST_STATIC 15 -#define OX820_SYS_CTRL_RST_GPIO 16 -#define OX820_SYS_CTRL_RST_UART1 17 -#define OX820_SYS_CTRL_RST_UART2 18 -#define OX820_SYS_CTRL_RST_MISC 19 -#define OX820_SYS_CTRL_RST_I2S 20 -#define OX820_SYS_CTRL_RST_SD 21 -#define OX820_SYS_CTRL_RST_MACB 22 -#define OX820_SYS_CTRL_RST_PCIEB 23 -#define OX820_SYS_CTRL_RST_VIDEO 24 -#define OX820_SYS_CTRL_RST_DDR_PHY 25 -#define OX820_SYS_CTRL_RST_USBHSPHYB 26 -#define OX820_SYS_CTRL_RST_USBDEV 27 -#define OX820_SYS_CTRL_RST_ARMDBG 29 -#define OX820_SYS_CTRL_RST_PLLA 30 -#define OX820_SYS_CTRL_RST_PLLB 31 - -/* bit numbers of clock control register */ -#define OX820_SYS_CTRL_CLK_COPRO 0 -#define OX820_SYS_CTRL_CLK_DMA 1 -#define OX820_SYS_CTRL_CLK_CIPHER 2 -#define OX820_SYS_CTRL_CLK_SD 3 -#define OX820_SYS_CTRL_CLK_SATA 4 -#define OX820_SYS_CTRL_CLK_I2S 5 -#define OX820_SYS_CTRL_CLK_USBHS 6 -#define OX820_SYS_CTRL_CLK_MACA 7 -#define OX820_SYS_CTRL_CLK_MAC OX820_SYS_CTRL_CLK_MACA -#define OX820_SYS_CTRL_CLK_PCIEA 8 -#define OX820_SYS_CTRL_CLK_STATIC 9 -#define OX820_SYS_CTRL_CLK_MACB 10 -#define OX820_SYS_CTRL_CLK_PCIEB 11 -#define OX820_SYS_CTRL_CLK_REF600 12 -#define OX820_SYS_CTRL_CLK_USBDEV 13 -#define OX820_SYS_CTRL_CLK_DDR 14 -#define OX820_SYS_CTRL_CLK_DDRPHY 15 -#define OX820_SYS_CTRL_CLK_DDRCK 16 - -/* Regmap offsets */ -#define OX820_CLK_SET_REGOFFSET 0x2c -#define OX820_CLK_CLR_REGOFFSET 0x30 -#define OX820_RST_SET_REGOFFSET 0x34 -#define OX820_RST_CLR_REGOFFSET 0x38 -#define OX820_SECONDARY_SEL_REGOFFSET 0x14 -#define OX820_TERTIARY_SEL_REGOFFSET 0x8c -#define OX820_QUATERNARY_SEL_REGOFFSET 0x94 -#define OX820_DEBUG_SEL_REGOFFSET 0x9c -#define OX820_ALTERNATIVE_SEL_REGOFFSET 0xa4 -#define OX820_PULLUP_SEL_REGOFFSET 0xac -#define OX820_SEC_SECONDARY_SEL_REGOFFSET 0x100014 -#define OX820_SEC_TERTIARY_SEL_REGOFFSET 0x10008c -#define OX820_SEC_QUATERNARY_SEL_REGOFFSET 0x100094 -#define OX820_SEC_DEBUG_SEL_REGOFFSET 0x10009c -#define OX820_SEC_ALTERNATIVE_SEL_REGOFFSET 0x1000a4 -#define OX820_SEC_PULLUP_SEL_REGOFFSET 0x1000ac - -struct oxnas_restart_context { - struct regmap *sys_ctrl; - struct notifier_block restart_handler; -}; - -static int ox820_restart_handle(struct notifier_block *this, - unsigned long mode, void *cmd) -{ - struct oxnas_restart_context *ctx = container_of(this, struct - oxnas_restart_context, - restart_handler); - u32 value; - - /* - * Assert reset to cores as per power on defaults - * Don't touch the DDR interface as things will come to an impromptu - * stop NB Possibly should be asserting reset for PLLB, but there are - * timing concerns here according to the docs - */ - value = BIT(OX820_SYS_CTRL_RST_COPRO) | - BIT(OX820_SYS_CTRL_RST_USBHS) | - BIT(OX820_SYS_CTRL_RST_USBHSPHYA) | - BIT(OX820_SYS_CTRL_RST_MACA) | - BIT(OX820_SYS_CTRL_RST_PCIEA) | - BIT(OX820_SYS_CTRL_RST_SGDMA) | - BIT(OX820_SYS_CTRL_RST_CIPHER) | - BIT(OX820_SYS_CTRL_RST_SATA) | - BIT(OX820_SYS_CTRL_RST_SATA_LINK) | - BIT(OX820_SYS_CTRL_RST_SATA_PHY) | - BIT(OX820_SYS_CTRL_RST_PCIEPHY) | - BIT(OX820_SYS_CTRL_RST_STATIC) | - BIT(OX820_SYS_CTRL_RST_UART1) | - BIT(OX820_SYS_CTRL_RST_UART2) | - BIT(OX820_SYS_CTRL_RST_MISC) | - BIT(OX820_SYS_CTRL_RST_I2S) | - BIT(OX820_SYS_CTRL_RST_SD) | - BIT(OX820_SYS_CTRL_RST_MACB) | - BIT(OX820_SYS_CTRL_RST_PCIEB) | - BIT(OX820_SYS_CTRL_RST_VIDEO) | - BIT(OX820_SYS_CTRL_RST_USBHSPHYB) | - BIT(OX820_SYS_CTRL_RST_USBDEV); - - regmap_write(ctx->sys_ctrl, OX820_RST_SET_REGOFFSET, value); - - /* Release reset to cores as per power on defaults */ - regmap_write(ctx->sys_ctrl, OX820_RST_CLR_REGOFFSET, - BIT(OX820_SYS_CTRL_RST_GPIO)); - - /* - * Disable clocks to cores as per power-on defaults - must leave DDR - * related clocks enabled otherwise we'll stop rather abruptly. - */ - value = BIT(OX820_SYS_CTRL_CLK_COPRO) | - BIT(OX820_SYS_CTRL_CLK_DMA) | - BIT(OX820_SYS_CTRL_CLK_CIPHER) | - BIT(OX820_SYS_CTRL_CLK_SD) | - BIT(OX820_SYS_CTRL_CLK_SATA) | - BIT(OX820_SYS_CTRL_CLK_I2S) | - BIT(OX820_SYS_CTRL_CLK_USBHS) | - BIT(OX820_SYS_CTRL_CLK_MAC) | - BIT(OX820_SYS_CTRL_CLK_PCIEA) | - BIT(OX820_SYS_CTRL_CLK_STATIC) | - BIT(OX820_SYS_CTRL_CLK_MACB) | - BIT(OX820_SYS_CTRL_CLK_PCIEB) | - BIT(OX820_SYS_CTRL_CLK_REF600) | - BIT(OX820_SYS_CTRL_CLK_USBDEV); - - regmap_write(ctx->sys_ctrl, OX820_CLK_CLR_REGOFFSET, value); - - /* Enable clocks to cores as per power-on defaults */ - - /* Set sys-control pin mux'ing as per power-on defaults */ - regmap_write(ctx->sys_ctrl, OX820_SECONDARY_SEL_REGOFFSET, 0); - regmap_write(ctx->sys_ctrl, OX820_TERTIARY_SEL_REGOFFSET, 0); - regmap_write(ctx->sys_ctrl, OX820_QUATERNARY_SEL_REGOFFSET, 0); - regmap_write(ctx->sys_ctrl, OX820_DEBUG_SEL_REGOFFSET, 0); - regmap_write(ctx->sys_ctrl, OX820_ALTERNATIVE_SEL_REGOFFSET, 0); - regmap_write(ctx->sys_ctrl, OX820_PULLUP_SEL_REGOFFSET, 0); - - regmap_write(ctx->sys_ctrl, OX820_SEC_SECONDARY_SEL_REGOFFSET, 0); - regmap_write(ctx->sys_ctrl, OX820_SEC_TERTIARY_SEL_REGOFFSET, 0); - regmap_write(ctx->sys_ctrl, OX820_SEC_QUATERNARY_SEL_REGOFFSET, 0); - regmap_write(ctx->sys_ctrl, OX820_SEC_DEBUG_SEL_REGOFFSET, 0); - regmap_write(ctx->sys_ctrl, OX820_SEC_ALTERNATIVE_SEL_REGOFFSET, 0); - regmap_write(ctx->sys_ctrl, OX820_SEC_PULLUP_SEL_REGOFFSET, 0); - - /* - * No need to save any state, as the ROM loader can determine whether - * reset is due to power cycling or programatic action, just hit the - * (self-clearing) CPU reset bit of the block reset register - */ - value = - BIT(OX820_SYS_CTRL_RST_SCU) | - BIT(OX820_SYS_CTRL_RST_ARM0) | - BIT(OX820_SYS_CTRL_RST_ARM1); - - regmap_write(ctx->sys_ctrl, OX820_RST_SET_REGOFFSET, value); - - pr_emerg("Unable to restart system\n"); - return NOTIFY_DONE; -} - -static int ox820_restart_probe(struct platform_device *pdev) -{ - struct oxnas_restart_context *ctx; - struct regmap *sys_ctrl; - struct device *dev = &pdev->dev; - int err = 0; - - sys_ctrl = syscon_node_to_regmap(pdev->dev.of_node); - if (IS_ERR(sys_ctrl)) - return PTR_ERR(sys_ctrl); - - ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); - if (!ctx) - return -ENOMEM; - - ctx->sys_ctrl = sys_ctrl; - ctx->restart_handler.notifier_call = ox820_restart_handle; - ctx->restart_handler.priority = 192; - err = register_restart_handler(&ctx->restart_handler); - if (err) - dev_err(dev, "can't register restart notifier (err=%d)\n", err); - - return err; -} - -static const struct of_device_id ox820_restart_of_match[] = { - { .compatible = "oxsemi,ox820-sys-ctrl" }, - {} -}; - -static struct platform_driver ox820_restart_driver = { - .probe = ox820_restart_probe, - .driver = { - .name = "ox820-chip-reset", - .of_match_table = ox820_restart_of_match, - }, -}; -builtin_platform_driver(ox820_restart_driver);