diff mbox series

[1/2] arm64: dts: broadcom: Enable device-tree overlay support for RPi devices

Message ID 20230530175624.2360218-2-u.kleine-koenig@pengutronix.de (mailing list archive)
State Not Applicable
Headers show
Series arm*/dts: Enable symbols for rpi device trees | expand

Commit Message

Uwe Kleine-König May 30, 2023, 5:56 p.m. UTC 
From: Aurelien Jarno <aurelien@aurel32.net>

Add the '-@' DTC option for the Raspberry Pi devices. This option
populates the '__symbols__' node that contains all the necessary symbols
for supporting device-tree overlays (for instance from the firmware or
the bootloader) on these devices.

The Rasbperry Pi devices are well known for their GPIO header, that
allow various "HATs" or other modules do be connected and this enables
users to create out-of-tree device-tree overlays for these modules.

Please note that this change does increase the size of the resulting DTB
by ~40%. For example, with v6.4-rc1 increase in size is as follows:

  bcm2711-rpi-400.dtb       27556 -> 38141 bytes
  bcm2711-rpi-4-b.dtb       27484 -> 38069 bytes
  bcm2711-rpi-cm4-io.dtb    27373 -> 38076 bytes
  bcm2837-rpi-3-a-plus.dtb  14930 -> 20713 bytes
  bcm2837-rpi-3-b.dtb       15107 -> 20979 bytes
  bcm2837-rpi-3-b-plus.dtb  15463 -> 21443 bytes
  bcm2837-rpi-cm3-io3.dtb   14429 -> 20098 bytes
  bcm2837-rpi-zero-2-w.dtb  14781 -> 20524 bytes

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Link: https://lore.kernel.org/r/20220410225940.135744-2-aurelien@aurel32.net
[ukleinek: rebased to v6.4, replaced by a single assignment to DTC_FLAGS]
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm64/boot/dts/broadcom/Makefile | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index 05d8c5ecf3b0..8b4591ddd27c 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -1,4 +1,8 @@ 
 # SPDX-License-Identifier: GPL-2.0
+
+# Enables support for device-tree overlays
+DTC_FLAGS := -@
+
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
 			      bcm2711-rpi-4-b.dtb \
 			      bcm2711-rpi-cm4-io.dtb \