| Message ID | 20240213-arm-dt-cleanups-v1-2-f2dee1292525@kernel.org (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 96fd598e9c34cfa68402a4da3020c9236cfacf35 |
| Headers | show |
| Series | dts: Fix dtc interrupt warnings | expand |
On Tue, 2024-02-13 at 13:34 -0600, Rob Herring wrote: > The dtc interrupt_provider warning is off by default. Fix all the warnings > so it can be enabled. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- > arch/arm/boot/dts/amazon/alpine.dtsi | 1 - > arch/arm/boot/dts/aspeed/aspeed-g4.dtsi | 14 -------------- > arch/arm/boot/dts/aspeed/aspeed-g5.dtsi | 15 +-------------- > arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 18 ++---------------- I wrote a very similar patch just a day or so ago, so thanks :) For the Aspeed portions: Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Hi Rob On 2/13/24 20:34, Rob Herring wrote: > The dtc interrupt_provider warning is off by default. Fix all the warnings > so it can be enabled. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- > arch/arm/boot/dts/amazon/alpine.dtsi | 1 - > arch/arm/boot/dts/aspeed/aspeed-g4.dtsi | 14 -------------- > arch/arm/boot/dts/aspeed/aspeed-g5.dtsi | 15 +-------------- > arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 18 ++---------------- > arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi | 3 +++ > arch/arm/boot/dts/broadcom/bcm-hr2.dtsi | 1 + > arch/arm/boot/dts/broadcom/bcm-nsp.dtsi | 2 ++ > arch/arm/boot/dts/marvell/kirkwood-l-50.dts | 2 ++ > arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi | 2 ++ > arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi | 1 - > arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi | 1 - > arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi | 1 - > arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts | 3 --- > arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi | 2 +- > arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi | 1 - > arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi | 1 - > arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi | 1 - > arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi | 1 + > .../boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi | 1 + > arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts | 1 + > arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts | 1 + > arch/arm/boot/dts/st/stm32429i-eval.dts | 1 - > arch/arm/boot/dts/st/stm32mp157c-dk2.dts | 1 - > arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts | 1 - > 24 files changed, 18 insertions(+), 58 deletions(-) > For ST part: Reviewed-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Thanks Alex > diff --git a/arch/arm/boot/dts/amazon/alpine.dtsi b/arch/arm/boot/dts/amazon/alpine.dtsi > index ff68dfb4eb78..90bd12feac01 100644 > --- a/arch/arm/boot/dts/amazon/alpine.dtsi > +++ b/arch/arm/boot/dts/amazon/alpine.dtsi > @@ -167,7 +167,6 @@ pcie@fbc00000 { > msix: msix@fbe00000 { > compatible = "al,alpine-msix"; > reg = <0x0 0xfbe00000 0x0 0x100000>; > - interrupt-controller; > msi-controller; > al,msi-base-spi = <96>; > al,msi-num-spis = <64>; > diff --git a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi > index 530491ae5eb2..857cb26ed6d7 100644 > --- a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi > +++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi > @@ -466,7 +466,6 @@ i2c_ic: interrupt-controller@0 { > i2c0: i2c-bus@40 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0x40 0x40>; > compatible = "aspeed,ast2400-i2c-bus"; > @@ -482,7 +481,6 @@ i2c0: i2c-bus@40 { > i2c1: i2c-bus@80 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0x80 0x40>; > compatible = "aspeed,ast2400-i2c-bus"; > @@ -498,7 +496,6 @@ i2c1: i2c-bus@80 { > i2c2: i2c-bus@c0 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0xc0 0x40>; > compatible = "aspeed,ast2400-i2c-bus"; > @@ -515,7 +512,6 @@ i2c2: i2c-bus@c0 { > i2c3: i2c-bus@100 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0x100 0x40>; > compatible = "aspeed,ast2400-i2c-bus"; > @@ -532,7 +528,6 @@ i2c3: i2c-bus@100 { > i2c4: i2c-bus@140 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0x140 0x40>; > compatible = "aspeed,ast2400-i2c-bus"; > @@ -549,7 +544,6 @@ i2c4: i2c-bus@140 { > i2c5: i2c-bus@180 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0x180 0x40>; > compatible = "aspeed,ast2400-i2c-bus"; > @@ -566,7 +560,6 @@ i2c5: i2c-bus@180 { > i2c6: i2c-bus@1c0 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0x1c0 0x40>; > compatible = "aspeed,ast2400-i2c-bus"; > @@ -583,7 +576,6 @@ i2c6: i2c-bus@1c0 { > i2c7: i2c-bus@300 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0x300 0x40>; > compatible = "aspeed,ast2400-i2c-bus"; > @@ -600,7 +592,6 @@ i2c7: i2c-bus@300 { > i2c8: i2c-bus@340 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0x340 0x40>; > compatible = "aspeed,ast2400-i2c-bus"; > @@ -617,7 +608,6 @@ i2c8: i2c-bus@340 { > i2c9: i2c-bus@380 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0x380 0x40>; > compatible = "aspeed,ast2400-i2c-bus"; > @@ -634,7 +624,6 @@ i2c9: i2c-bus@380 { > i2c10: i2c-bus@3c0 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0x3c0 0x40>; > compatible = "aspeed,ast2400-i2c-bus"; > @@ -651,7 +640,6 @@ i2c10: i2c-bus@3c0 { > i2c11: i2c-bus@400 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0x400 0x40>; > compatible = "aspeed,ast2400-i2c-bus"; > @@ -668,7 +656,6 @@ i2c11: i2c-bus@400 { > i2c12: i2c-bus@440 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0x440 0x40>; > compatible = "aspeed,ast2400-i2c-bus"; > @@ -685,7 +672,6 @@ i2c12: i2c-bus@440 { > i2c13: i2c-bus@480 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0x480 0x40>; > compatible = "aspeed,ast2400-i2c-bus"; > diff --git a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi > index 04f98d1dbb97..e6f3cf3c721e 100644 > --- a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi > +++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi > @@ -363,6 +363,7 @@ sgpio: sgpio@1e780200 { > interrupts = <40>; > reg = <0x1e780200 0x0100>; > clocks = <&syscon ASPEED_CLK_APB>; > + #interrupt-cells = <2>; > interrupt-controller; > bus-frequency = <12000000>; > pinctrl-names = "default"; > @@ -594,7 +595,6 @@ i2c_ic: interrupt-controller@0 { > i2c0: i2c-bus@40 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0x40 0x40>; > compatible = "aspeed,ast2500-i2c-bus"; > @@ -610,7 +610,6 @@ i2c0: i2c-bus@40 { > i2c1: i2c-bus@80 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0x80 0x40>; > compatible = "aspeed,ast2500-i2c-bus"; > @@ -626,7 +625,6 @@ i2c1: i2c-bus@80 { > i2c2: i2c-bus@c0 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0xc0 0x40>; > compatible = "aspeed,ast2500-i2c-bus"; > @@ -643,7 +641,6 @@ i2c2: i2c-bus@c0 { > i2c3: i2c-bus@100 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0x100 0x40>; > compatible = "aspeed,ast2500-i2c-bus"; > @@ -660,7 +657,6 @@ i2c3: i2c-bus@100 { > i2c4: i2c-bus@140 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0x140 0x40>; > compatible = "aspeed,ast2500-i2c-bus"; > @@ -677,7 +673,6 @@ i2c4: i2c-bus@140 { > i2c5: i2c-bus@180 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0x180 0x40>; > compatible = "aspeed,ast2500-i2c-bus"; > @@ -694,7 +689,6 @@ i2c5: i2c-bus@180 { > i2c6: i2c-bus@1c0 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0x1c0 0x40>; > compatible = "aspeed,ast2500-i2c-bus"; > @@ -711,7 +705,6 @@ i2c6: i2c-bus@1c0 { > i2c7: i2c-bus@300 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0x300 0x40>; > compatible = "aspeed,ast2500-i2c-bus"; > @@ -728,7 +721,6 @@ i2c7: i2c-bus@300 { > i2c8: i2c-bus@340 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0x340 0x40>; > compatible = "aspeed,ast2500-i2c-bus"; > @@ -745,7 +737,6 @@ i2c8: i2c-bus@340 { > i2c9: i2c-bus@380 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0x380 0x40>; > compatible = "aspeed,ast2500-i2c-bus"; > @@ -762,7 +753,6 @@ i2c9: i2c-bus@380 { > i2c10: i2c-bus@3c0 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0x3c0 0x40>; > compatible = "aspeed,ast2500-i2c-bus"; > @@ -779,7 +769,6 @@ i2c10: i2c-bus@3c0 { > i2c11: i2c-bus@400 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0x400 0x40>; > compatible = "aspeed,ast2500-i2c-bus"; > @@ -796,7 +785,6 @@ i2c11: i2c-bus@400 { > i2c12: i2c-bus@440 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0x440 0x40>; > compatible = "aspeed,ast2500-i2c-bus"; > @@ -813,7 +801,6 @@ i2c12: i2c-bus@440 { > i2c13: i2c-bus@480 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > > reg = <0x480 0x40>; > compatible = "aspeed,ast2500-i2c-bus"; > diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi > index c4d1faade8be..29f94696d8b1 100644 > --- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi > +++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi > @@ -474,6 +474,7 @@ sgpiom0: sgpiom@1e780500 { > reg = <0x1e780500 0x100>; > interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&syscon ASPEED_CLK_APB2>; > + #interrupt-cells = <2>; > interrupt-controller; > bus-frequency = <12000000>; > pinctrl-names = "default"; > @@ -488,6 +489,7 @@ sgpiom1: sgpiom@1e780600 { > reg = <0x1e780600 0x100>; > interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&syscon ASPEED_CLK_APB2>; > + #interrupt-cells = <2>; > interrupt-controller; > bus-frequency = <12000000>; > pinctrl-names = "default"; > @@ -902,7 +904,6 @@ &i2c { > i2c0: i2c-bus@80 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > reg = <0x80 0x80>; > compatible = "aspeed,ast2600-i2c-bus"; > clocks = <&syscon ASPEED_CLK_APB2>; > @@ -917,7 +918,6 @@ i2c0: i2c-bus@80 { > i2c1: i2c-bus@100 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > reg = <0x100 0x80>; > compatible = "aspeed,ast2600-i2c-bus"; > clocks = <&syscon ASPEED_CLK_APB2>; > @@ -932,7 +932,6 @@ i2c1: i2c-bus@100 { > i2c2: i2c-bus@180 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > reg = <0x180 0x80>; > compatible = "aspeed,ast2600-i2c-bus"; > clocks = <&syscon ASPEED_CLK_APB2>; > @@ -947,7 +946,6 @@ i2c2: i2c-bus@180 { > i2c3: i2c-bus@200 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > reg = <0x200 0x80>; > compatible = "aspeed,ast2600-i2c-bus"; > clocks = <&syscon ASPEED_CLK_APB2>; > @@ -962,7 +960,6 @@ i2c3: i2c-bus@200 { > i2c4: i2c-bus@280 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > reg = <0x280 0x80>; > compatible = "aspeed,ast2600-i2c-bus"; > clocks = <&syscon ASPEED_CLK_APB2>; > @@ -977,7 +974,6 @@ i2c4: i2c-bus@280 { > i2c5: i2c-bus@300 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > reg = <0x300 0x80>; > compatible = "aspeed,ast2600-i2c-bus"; > clocks = <&syscon ASPEED_CLK_APB2>; > @@ -992,7 +988,6 @@ i2c5: i2c-bus@300 { > i2c6: i2c-bus@380 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > reg = <0x380 0x80>; > compatible = "aspeed,ast2600-i2c-bus"; > clocks = <&syscon ASPEED_CLK_APB2>; > @@ -1007,7 +1002,6 @@ i2c6: i2c-bus@380 { > i2c7: i2c-bus@400 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > reg = <0x400 0x80>; > compatible = "aspeed,ast2600-i2c-bus"; > clocks = <&syscon ASPEED_CLK_APB2>; > @@ -1022,7 +1016,6 @@ i2c7: i2c-bus@400 { > i2c8: i2c-bus@480 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > reg = <0x480 0x80>; > compatible = "aspeed,ast2600-i2c-bus"; > clocks = <&syscon ASPEED_CLK_APB2>; > @@ -1037,7 +1030,6 @@ i2c8: i2c-bus@480 { > i2c9: i2c-bus@500 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > reg = <0x500 0x80>; > compatible = "aspeed,ast2600-i2c-bus"; > clocks = <&syscon ASPEED_CLK_APB2>; > @@ -1052,7 +1044,6 @@ i2c9: i2c-bus@500 { > i2c10: i2c-bus@580 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > reg = <0x580 0x80>; > compatible = "aspeed,ast2600-i2c-bus"; > clocks = <&syscon ASPEED_CLK_APB2>; > @@ -1067,7 +1058,6 @@ i2c10: i2c-bus@580 { > i2c11: i2c-bus@600 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > reg = <0x600 0x80>; > compatible = "aspeed,ast2600-i2c-bus"; > clocks = <&syscon ASPEED_CLK_APB2>; > @@ -1082,7 +1072,6 @@ i2c11: i2c-bus@600 { > i2c12: i2c-bus@680 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > reg = <0x680 0x80>; > compatible = "aspeed,ast2600-i2c-bus"; > clocks = <&syscon ASPEED_CLK_APB2>; > @@ -1097,7 +1086,6 @@ i2c12: i2c-bus@680 { > i2c13: i2c-bus@700 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > reg = <0x700 0x80>; > compatible = "aspeed,ast2600-i2c-bus"; > clocks = <&syscon ASPEED_CLK_APB2>; > @@ -1112,7 +1100,6 @@ i2c13: i2c-bus@700 { > i2c14: i2c-bus@780 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > reg = <0x780 0x80>; > compatible = "aspeed,ast2600-i2c-bus"; > clocks = <&syscon ASPEED_CLK_APB2>; > @@ -1127,7 +1114,6 @@ i2c14: i2c-bus@780 { > i2c15: i2c-bus@800 { > #address-cells = <1>; > #size-cells = <0>; > - #interrupt-cells = <1>; > reg = <0x800 0x80>; > compatible = "aspeed,ast2600-i2c-bus"; > clocks = <&syscon ASPEED_CLK_APB2>; > diff --git a/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi > index f9f79ed82518..07ca0d993c9f 100644 > --- a/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi > +++ b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi > @@ -167,6 +167,7 @@ gpio_crmu: gpio@3024800 { > #gpio-cells = <2>; > gpio-controller; > interrupt-controller; > + #interrupt-cells = <2>; > interrupt-parent = <&mailbox>; > interrupts = <0>; > }; > @@ -247,6 +248,7 @@ gpio_ccm: gpio@1800a000 { > gpio-controller; > interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; > interrupt-controller; > + #interrupt-cells = <2>; > }; > > i2c1: i2c@1800b000 { > @@ -518,6 +520,7 @@ gpio_asiu: gpio@180a5000 { > gpio-controller; > > interrupt-controller; > + #interrupt-cells = <2>; > interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; > gpio-ranges = <&pinctrl 0 42 1>, > <&pinctrl 1 44 3>, > diff --git a/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi > index 788a6806191a..75545b10ef2f 100644 > --- a/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi > +++ b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi > @@ -200,6 +200,7 @@ gpiob: gpio@30000 { > gpio-controller; > ngpios = <4>; > interrupt-controller; > + #interrupt-cells = <2>; > interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; > }; > > diff --git a/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi > index 9d20ba3b1ffb..6a4482c93167 100644 > --- a/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi > +++ b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi > @@ -180,6 +180,7 @@ gpioa: gpio@20 { > gpio-controller; > ngpios = <32>; > interrupt-controller; > + #interrupt-cells = <2>; > interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; > gpio-ranges = <&pinctrl 0 0 32>; > }; > @@ -352,6 +353,7 @@ gpiob: gpio@30000 { > gpio-controller; > ngpios = <4>; > interrupt-controller; > + #interrupt-cells = <2>; > interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; > }; > > diff --git a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts > index dffb9f84e67c..c841eb8e7fb1 100644 > --- a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts > +++ b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts > @@ -65,6 +65,7 @@ i2c@11000 { > gpio2: gpio-expander@20 { > #gpio-cells = <2>; > #interrupt-cells = <2>; > + interrupt-controller; > compatible = "semtech,sx1505q"; > reg = <0x20>; > > @@ -79,6 +80,7 @@ gpio2: gpio-expander@20 { > gpio3: gpio-expander@21 { > #gpio-cells = <2>; > #interrupt-cells = <2>; > + interrupt-controller; > compatible = "semtech,sx1505q"; > reg = <0x21>; > > diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi > index fd671c7a1e5d..6e1f0f164cb4 100644 > --- a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi > +++ b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi > @@ -120,6 +120,7 @@ gpio0: gpio@0 { > interrupts = <2 IRQ_TYPE_LEVEL_HIGH>, > <3 IRQ_TYPE_LEVEL_HIGH>, > <4 IRQ_TYPE_LEVEL_HIGH>; > + #interrupt-cells = <2>; > interrupt-controller; > }; > > @@ -128,6 +129,7 @@ gpio1: gpio@1 { > gpio-controller; > #gpio-cells = <2>; > interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; > + #interrupt-cells = <2>; > interrupt-controller; > }; > > diff --git a/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi > index 1640763fd4af..ff0d684622f7 100644 > --- a/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi > +++ b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi > @@ -997,7 +997,6 @@ touchscreen@41 { > compatible = "st,stmpe811"; > reg = <0x41>; > irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; > - interrupt-controller; > id = <0>; > blocks = <0x5>; > irq-trigger = <0x1>; > diff --git a/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi b/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi > index 3b6fad273cab..d38f1dd38a90 100644 > --- a/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi > +++ b/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi > @@ -980,7 +980,6 @@ touchscreen@41 { > compatible = "st,stmpe811"; > reg = <0x41>; > irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; > - interrupt-controller; > id = <0>; > blocks = <0x5>; > irq-trigger = <0x1>; > diff --git a/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi b/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi > index 4eb526fe9c55..81c8a5fd92cc 100644 > --- a/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi > +++ b/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi > @@ -861,7 +861,6 @@ touchscreen@41 { > compatible = "st,stmpe811"; > reg = <0x41>; > irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; > - interrupt-controller; > id = <0>; > blocks = <0x5>; > irq-trigger = <0x1>; > diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts > index db8c332df6a1..cad112e05475 100644 > --- a/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts > +++ b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts > @@ -227,7 +227,6 @@ bridge@1,0 { > > #address-cells = <3>; > #size-cells = <2>; > - #interrupt-cells = <1>; > > bridge@2,1 { > compatible = "pci10b5,8605"; > @@ -235,7 +234,6 @@ bridge@2,1 { > > #address-cells = <3>; > #size-cells = <2>; > - #interrupt-cells = <1>; > > /* Intel Corporation I210 Gigabit Network Connection */ > ethernet@3,0 { > @@ -250,7 +248,6 @@ bridge@2,2 { > > #address-cells = <3>; > #size-cells = <2>; > - #interrupt-cells = <1>; > > /* Intel Corporation I210 Gigabit Network Connection */ > switch_nic: ethernet@4,0 { > diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi > index 99f4f6ac71d4..c1ae7c47b442 100644 > --- a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi > +++ b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi > @@ -245,6 +245,7 @@ pca9539: pca9539@74 { > reg = <0x74>; > gpio-controller; > #gpio-cells = <2>; > + #interrupt-cells = <2>; > interrupt-controller; > interrupt-parent = <&gpio2>; > interrupts = <3 IRQ_TYPE_LEVEL_LOW>; > @@ -390,7 +391,6 @@ pci_root: root@0,0 { > > #address-cells = <3>; > #size-cells = <2>; > - #interrupt-cells = <1>; > }; > }; > > diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi > index 2ae93f57fe5a..ea40623d12e5 100644 > --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi > +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi > @@ -626,7 +626,6 @@ stmpe811@41 { > blocks = <0x5>; > id = <0>; > interrupts = <10 IRQ_TYPE_LEVEL_LOW>; > - interrupt-controller; > interrupt-parent = <&gpio4>; > irq-trigger = <0x1>; > pinctrl-names = "default"; > diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi > index 55c90f6393ad..d3a7a6eeb8e0 100644 > --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi > +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi > @@ -550,7 +550,6 @@ stmpe811@41 { > blocks = <0x5>; > interrupts = <20 IRQ_TYPE_LEVEL_LOW>; > interrupt-parent = <&gpio6>; > - interrupt-controller; > id = <0>; > irq-trigger = <0x1>; > pinctrl-names = "default"; > diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi > index a63e73adc1fc..42b2ba23aefc 100644 > --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi > +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi > @@ -225,7 +225,6 @@ da9063: pmic@58 { > pinctrl-0 = <&pinctrl_pmic>; > interrupt-parent = <&gpio2>; > interrupts = <8 IRQ_TYPE_LEVEL_LOW>; > - interrupt-controller; > > onkey { > compatible = "dlg,da9063-onkey"; > diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi > index 113974520d54..c0c47adc5866 100644 > --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi > +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi > @@ -124,6 +124,7 @@ pmic@58 { > reg = <0x58>; > interrupt-parent = <&gpio2>; > interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */ > + #interrupt-cells = <2>; > interrupt-controller; > > regulators { > diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi > index 86b4269e0e01..85e278eb2016 100644 > --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi > +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi > @@ -100,6 +100,7 @@ pmic: pmic@58 { > interrupt-parent = <&gpio1>; > interrupts = <2 IRQ_TYPE_LEVEL_LOW>; > interrupt-controller; > + #interrupt-cells = <2>; > gpio-controller; > #gpio-cells = <2>; > > diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts > index 12361fcbe24a..1b965652291b 100644 > --- a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts > +++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts > @@ -63,6 +63,7 @@ pca9554: io-expander@25 { > gpio-controller; > #gpio-cells = <2>; > #interrupt-cells = <2>; > + interrupt-controller; > reg = <0x25>; > }; > > diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts > index b0ed68af0546..029f49be40e3 100644 > --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts > +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts > @@ -338,6 +338,7 @@ gpio6: io-expander@22 { > reg = <0x22>; > gpio-controller; > #gpio-cells = <2>; > + #interrupt-cells = <2>; > interrupt-controller; > interrupt-parent = <&gpio3>; > interrupts = <2 IRQ_TYPE_LEVEL_LOW>; > diff --git a/arch/arm/boot/dts/st/stm32429i-eval.dts b/arch/arm/boot/dts/st/stm32429i-eval.dts > index 576235ec3c51..afa417b34b25 100644 > --- a/arch/arm/boot/dts/st/stm32429i-eval.dts > +++ b/arch/arm/boot/dts/st/stm32429i-eval.dts > @@ -222,7 +222,6 @@ stmpe1600: stmpe1600@42 { > reg = <0x42>; > interrupts = <8 3>; > interrupt-parent = <&gpioi>; > - interrupt-controller; > wakeup-source; > > stmpegpio: stmpe_gpio { > diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts > index 510cca5acb79..7a701f7ef0c7 100644 > --- a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts > +++ b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts > @@ -64,7 +64,6 @@ touchscreen@38 { > reg = <0x38>; > interrupts = <2 2>; > interrupt-parent = <&gpiof>; > - interrupt-controller; > touchscreen-size-x = <480>; > touchscreen-size-y = <800>; > status = "okay"; > diff --git a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts > index c8e55642f9c6..3e834fc7e370 100644 > --- a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts > +++ b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts > @@ -415,7 +415,6 @@ stmpe811@41 { > reg = <0x41>; > interrupts = <30 IRQ_TYPE_LEVEL_LOW>; > interrupt-parent = <&gpio2>; > - interrupt-controller; > id = <0>; > blocks = <0x5>; > irq-trigger = <0x1>; >
On 2/13/24 11:34, Rob Herring wrote: > The dtc interrupt_provider warning is off by default. Fix all the warnings > so it can be enabled. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- > arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi | 3 +++ > arch/arm/boot/dts/broadcom/bcm-hr2.dtsi | 1 + > arch/arm/boot/dts/broadcom/bcm-nsp.dtsi | 2 ++ Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> #Broadcom
On Tue Feb 13, 2024 at 8:34 PM CET, Rob Herring wrote: [...] > arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi | 1 - > arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi | 1 - > arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi | 1 - [...] Acked-by: Thierry Reding <treding@nvidia.com>
diff --git a/arch/arm/boot/dts/amazon/alpine.dtsi b/arch/arm/boot/dts/amazon/alpine.dtsi index ff68dfb4eb78..90bd12feac01 100644 --- a/arch/arm/boot/dts/amazon/alpine.dtsi +++ b/arch/arm/boot/dts/amazon/alpine.dtsi @@ -167,7 +167,6 @@ pcie@fbc00000 { msix: msix@fbe00000 { compatible = "al,alpine-msix"; reg = <0x0 0xfbe00000 0x0 0x100000>; - interrupt-controller; msi-controller; al,msi-base-spi = <96>; al,msi-num-spis = <64>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi index 530491ae5eb2..857cb26ed6d7 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi @@ -466,7 +466,6 @@ i2c_ic: interrupt-controller@0 { i2c0: i2c-bus@40 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x40 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -482,7 +481,6 @@ i2c0: i2c-bus@40 { i2c1: i2c-bus@80 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x80 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -498,7 +496,6 @@ i2c1: i2c-bus@80 { i2c2: i2c-bus@c0 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0xc0 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -515,7 +512,6 @@ i2c2: i2c-bus@c0 { i2c3: i2c-bus@100 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x100 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -532,7 +528,6 @@ i2c3: i2c-bus@100 { i2c4: i2c-bus@140 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x140 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -549,7 +544,6 @@ i2c4: i2c-bus@140 { i2c5: i2c-bus@180 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x180 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -566,7 +560,6 @@ i2c5: i2c-bus@180 { i2c6: i2c-bus@1c0 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x1c0 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -583,7 +576,6 @@ i2c6: i2c-bus@1c0 { i2c7: i2c-bus@300 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x300 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -600,7 +592,6 @@ i2c7: i2c-bus@300 { i2c8: i2c-bus@340 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x340 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -617,7 +608,6 @@ i2c8: i2c-bus@340 { i2c9: i2c-bus@380 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x380 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -634,7 +624,6 @@ i2c9: i2c-bus@380 { i2c10: i2c-bus@3c0 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x3c0 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -651,7 +640,6 @@ i2c10: i2c-bus@3c0 { i2c11: i2c-bus@400 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x400 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -668,7 +656,6 @@ i2c11: i2c-bus@400 { i2c12: i2c-bus@440 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x440 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -685,7 +672,6 @@ i2c12: i2c-bus@440 { i2c13: i2c-bus@480 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x480 0x40>; compatible = "aspeed,ast2400-i2c-bus"; diff --git a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi index 04f98d1dbb97..e6f3cf3c721e 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi @@ -363,6 +363,7 @@ sgpio: sgpio@1e780200 { interrupts = <40>; reg = <0x1e780200 0x0100>; clocks = <&syscon ASPEED_CLK_APB>; + #interrupt-cells = <2>; interrupt-controller; bus-frequency = <12000000>; pinctrl-names = "default"; @@ -594,7 +595,6 @@ i2c_ic: interrupt-controller@0 { i2c0: i2c-bus@40 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x40 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -610,7 +610,6 @@ i2c0: i2c-bus@40 { i2c1: i2c-bus@80 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x80 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -626,7 +625,6 @@ i2c1: i2c-bus@80 { i2c2: i2c-bus@c0 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0xc0 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -643,7 +641,6 @@ i2c2: i2c-bus@c0 { i2c3: i2c-bus@100 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x100 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -660,7 +657,6 @@ i2c3: i2c-bus@100 { i2c4: i2c-bus@140 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x140 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -677,7 +673,6 @@ i2c4: i2c-bus@140 { i2c5: i2c-bus@180 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x180 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -694,7 +689,6 @@ i2c5: i2c-bus@180 { i2c6: i2c-bus@1c0 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x1c0 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -711,7 +705,6 @@ i2c6: i2c-bus@1c0 { i2c7: i2c-bus@300 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x300 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -728,7 +721,6 @@ i2c7: i2c-bus@300 { i2c8: i2c-bus@340 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x340 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -745,7 +737,6 @@ i2c8: i2c-bus@340 { i2c9: i2c-bus@380 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x380 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -762,7 +753,6 @@ i2c9: i2c-bus@380 { i2c10: i2c-bus@3c0 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x3c0 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -779,7 +769,6 @@ i2c10: i2c-bus@3c0 { i2c11: i2c-bus@400 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x400 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -796,7 +785,6 @@ i2c11: i2c-bus@400 { i2c12: i2c-bus@440 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x440 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -813,7 +801,6 @@ i2c12: i2c-bus@440 { i2c13: i2c-bus@480 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x480 0x40>; compatible = "aspeed,ast2500-i2c-bus"; diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi index c4d1faade8be..29f94696d8b1 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi @@ -474,6 +474,7 @@ sgpiom0: sgpiom@1e780500 { reg = <0x1e780500 0x100>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; clocks = <&syscon ASPEED_CLK_APB2>; + #interrupt-cells = <2>; interrupt-controller; bus-frequency = <12000000>; pinctrl-names = "default"; @@ -488,6 +489,7 @@ sgpiom1: sgpiom@1e780600 { reg = <0x1e780600 0x100>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; clocks = <&syscon ASPEED_CLK_APB2>; + #interrupt-cells = <2>; interrupt-controller; bus-frequency = <12000000>; pinctrl-names = "default"; @@ -902,7 +904,6 @@ &i2c { i2c0: i2c-bus@80 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x80 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -917,7 +918,6 @@ i2c0: i2c-bus@80 { i2c1: i2c-bus@100 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x100 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -932,7 +932,6 @@ i2c1: i2c-bus@100 { i2c2: i2c-bus@180 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x180 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -947,7 +946,6 @@ i2c2: i2c-bus@180 { i2c3: i2c-bus@200 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x200 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -962,7 +960,6 @@ i2c3: i2c-bus@200 { i2c4: i2c-bus@280 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x280 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -977,7 +974,6 @@ i2c4: i2c-bus@280 { i2c5: i2c-bus@300 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x300 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -992,7 +988,6 @@ i2c5: i2c-bus@300 { i2c6: i2c-bus@380 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x380 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1007,7 +1002,6 @@ i2c6: i2c-bus@380 { i2c7: i2c-bus@400 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x400 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1022,7 +1016,6 @@ i2c7: i2c-bus@400 { i2c8: i2c-bus@480 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x480 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1037,7 +1030,6 @@ i2c8: i2c-bus@480 { i2c9: i2c-bus@500 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x500 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1052,7 +1044,6 @@ i2c9: i2c-bus@500 { i2c10: i2c-bus@580 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x580 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1067,7 +1058,6 @@ i2c10: i2c-bus@580 { i2c11: i2c-bus@600 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x600 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1082,7 +1072,6 @@ i2c11: i2c-bus@600 { i2c12: i2c-bus@680 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x680 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1097,7 +1086,6 @@ i2c12: i2c-bus@680 { i2c13: i2c-bus@700 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x700 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1112,7 +1100,6 @@ i2c13: i2c-bus@700 { i2c14: i2c-bus@780 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x780 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1127,7 +1114,6 @@ i2c14: i2c-bus@780 { i2c15: i2c-bus@800 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x800 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; diff --git a/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi index f9f79ed82518..07ca0d993c9f 100644 --- a/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi @@ -167,6 +167,7 @@ gpio_crmu: gpio@3024800 { #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; interrupt-parent = <&mailbox>; interrupts = <0>; }; @@ -247,6 +248,7 @@ gpio_ccm: gpio@1800a000 { gpio-controller; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; + #interrupt-cells = <2>; }; i2c1: i2c@1800b000 { @@ -518,6 +520,7 @@ gpio_asiu: gpio@180a5000 { gpio-controller; interrupt-controller; + #interrupt-cells = <2>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; gpio-ranges = <&pinctrl 0 42 1>, <&pinctrl 1 44 3>, diff --git a/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi index 788a6806191a..75545b10ef2f 100644 --- a/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi @@ -200,6 +200,7 @@ gpiob: gpio@30000 { gpio-controller; ngpios = <4>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi index 9d20ba3b1ffb..6a4482c93167 100644 --- a/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi @@ -180,6 +180,7 @@ gpioa: gpio@20 { gpio-controller; ngpios = <32>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; gpio-ranges = <&pinctrl 0 0 32>; }; @@ -352,6 +353,7 @@ gpiob: gpio@30000 { gpio-controller; ngpios = <4>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts index dffb9f84e67c..c841eb8e7fb1 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts @@ -65,6 +65,7 @@ i2c@11000 { gpio2: gpio-expander@20 { #gpio-cells = <2>; #interrupt-cells = <2>; + interrupt-controller; compatible = "semtech,sx1505q"; reg = <0x20>; @@ -79,6 +80,7 @@ gpio2: gpio-expander@20 { gpio3: gpio-expander@21 { #gpio-cells = <2>; #interrupt-cells = <2>; + interrupt-controller; compatible = "semtech,sx1505q"; reg = <0x21>; diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi index fd671c7a1e5d..6e1f0f164cb4 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi +++ b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi @@ -120,6 +120,7 @@ gpio0: gpio@0 { interrupts = <2 IRQ_TYPE_LEVEL_HIGH>, <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; interrupt-controller; }; @@ -128,6 +129,7 @@ gpio1: gpio@1 { gpio-controller; #gpio-cells = <2>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; interrupt-controller; }; diff --git a/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi index 1640763fd4af..ff0d684622f7 100644 --- a/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi @@ -997,7 +997,6 @@ touchscreen@41 { compatible = "st,stmpe811"; reg = <0x41>; irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; - interrupt-controller; id = <0>; blocks = <0x5>; irq-trigger = <0x1>; diff --git a/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi b/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi index 3b6fad273cab..d38f1dd38a90 100644 --- a/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi @@ -980,7 +980,6 @@ touchscreen@41 { compatible = "st,stmpe811"; reg = <0x41>; irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; - interrupt-controller; id = <0>; blocks = <0x5>; irq-trigger = <0x1>; diff --git a/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi b/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi index 4eb526fe9c55..81c8a5fd92cc 100644 --- a/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi @@ -861,7 +861,6 @@ touchscreen@41 { compatible = "st,stmpe811"; reg = <0x41>; irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; - interrupt-controller; id = <0>; blocks = <0x5>; irq-trigger = <0x1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts index db8c332df6a1..cad112e05475 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts @@ -227,7 +227,6 @@ bridge@1,0 { #address-cells = <3>; #size-cells = <2>; - #interrupt-cells = <1>; bridge@2,1 { compatible = "pci10b5,8605"; @@ -235,7 +234,6 @@ bridge@2,1 { #address-cells = <3>; #size-cells = <2>; - #interrupt-cells = <1>; /* Intel Corporation I210 Gigabit Network Connection */ ethernet@3,0 { @@ -250,7 +248,6 @@ bridge@2,2 { #address-cells = <3>; #size-cells = <2>; - #interrupt-cells = <1>; /* Intel Corporation I210 Gigabit Network Connection */ switch_nic: ethernet@4,0 { diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi index 99f4f6ac71d4..c1ae7c47b442 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi @@ -245,6 +245,7 @@ pca9539: pca9539@74 { reg = <0x74>; gpio-controller; #gpio-cells = <2>; + #interrupt-cells = <2>; interrupt-controller; interrupt-parent = <&gpio2>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; @@ -390,7 +391,6 @@ pci_root: root@0,0 { #address-cells = <3>; #size-cells = <2>; - #interrupt-cells = <1>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi index 2ae93f57fe5a..ea40623d12e5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi @@ -626,7 +626,6 @@ stmpe811@41 { blocks = <0x5>; id = <0>; interrupts = <10 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; interrupt-parent = <&gpio4>; irq-trigger = <0x1>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi index 55c90f6393ad..d3a7a6eeb8e0 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi @@ -550,7 +550,6 @@ stmpe811@41 { blocks = <0x5>; interrupts = <20 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpio6>; - interrupt-controller; id = <0>; irq-trigger = <0x1>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi index a63e73adc1fc..42b2ba23aefc 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi @@ -225,7 +225,6 @@ da9063: pmic@58 { pinctrl-0 = <&pinctrl_pmic>; interrupt-parent = <&gpio2>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; onkey { compatible = "dlg,da9063-onkey"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi index 113974520d54..c0c47adc5866 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi @@ -124,6 +124,7 @@ pmic@58 { reg = <0x58>; interrupt-parent = <&gpio2>; interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */ + #interrupt-cells = <2>; interrupt-controller; regulators { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi index 86b4269e0e01..85e278eb2016 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi @@ -100,6 +100,7 @@ pmic: pmic@58 { interrupt-parent = <&gpio1>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts index 12361fcbe24a..1b965652291b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts @@ -63,6 +63,7 @@ pca9554: io-expander@25 { gpio-controller; #gpio-cells = <2>; #interrupt-cells = <2>; + interrupt-controller; reg = <0x25>; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts index b0ed68af0546..029f49be40e3 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts @@ -338,6 +338,7 @@ gpio6: io-expander@22 { reg = <0x22>; gpio-controller; #gpio-cells = <2>; + #interrupt-cells = <2>; interrupt-controller; interrupt-parent = <&gpio3>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/st/stm32429i-eval.dts b/arch/arm/boot/dts/st/stm32429i-eval.dts index 576235ec3c51..afa417b34b25 100644 --- a/arch/arm/boot/dts/st/stm32429i-eval.dts +++ b/arch/arm/boot/dts/st/stm32429i-eval.dts @@ -222,7 +222,6 @@ stmpe1600: stmpe1600@42 { reg = <0x42>; interrupts = <8 3>; interrupt-parent = <&gpioi>; - interrupt-controller; wakeup-source; stmpegpio: stmpe_gpio { diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts index 510cca5acb79..7a701f7ef0c7 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts @@ -64,7 +64,6 @@ touchscreen@38 { reg = <0x38>; interrupts = <2 2>; interrupt-parent = <&gpiof>; - interrupt-controller; touchscreen-size-x = <480>; touchscreen-size-y = <800>; status = "okay"; diff --git a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts index c8e55642f9c6..3e834fc7e370 100644 --- a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts +++ b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts @@ -415,7 +415,6 @@ stmpe811@41 { reg = <0x41>; interrupts = <30 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpio2>; - interrupt-controller; id = <0>; blocks = <0x5>; irq-trigger = <0x1>;
The dtc interrupt_provider warning is off by default. Fix all the warnings so it can be enabled. Signed-off-by: Rob Herring <robh@kernel.org> --- arch/arm/boot/dts/amazon/alpine.dtsi | 1 - arch/arm/boot/dts/aspeed/aspeed-g4.dtsi | 14 -------------- arch/arm/boot/dts/aspeed/aspeed-g5.dtsi | 15 +-------------- arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 18 ++---------------- arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi | 3 +++ arch/arm/boot/dts/broadcom/bcm-hr2.dtsi | 1 + arch/arm/boot/dts/broadcom/bcm-nsp.dtsi | 2 ++ arch/arm/boot/dts/marvell/kirkwood-l-50.dts | 2 ++ arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi | 2 ++ arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi | 1 - arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi | 1 - arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi | 1 - arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts | 3 --- arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi | 1 - arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi | 1 - arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi | 1 - arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi | 1 + .../boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi | 1 + arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts | 1 + arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts | 1 + arch/arm/boot/dts/st/stm32429i-eval.dts | 1 - arch/arm/boot/dts/st/stm32mp157c-dk2.dts | 1 - arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts | 1 - 24 files changed, 18 insertions(+), 58 deletions(-)