deleted file mode 100644
@@ -1,38 +0,0 @@
-Marvell Armada 370, 375, 38x, XP Interrupt Controller
------------------------------------------------------
-
-Required properties:
-- compatible: Should be "marvell,mpic"
-- interrupt-controller: Identifies the node as an interrupt controller.
-- msi-controller: Identifies the node as an PCI Message Signaled
- Interrupt controller.
-- #interrupt-cells: The number of cells to define the interrupts. Should be 1.
- The cell is the IRQ number
-
-- reg: Should contain PMIC registers location and length. First pair
- for the main interrupt registers, second pair for the per-CPU
- interrupt registers. For this last pair, to be compliant with SMP
- support, the "virtual" must be use (For the record, these registers
- automatically map to the interrupt controller registers of the
- current CPU)
-
-Optional properties:
-
-- interrupts: If defined, then it indicates that this MPIC is
- connected as a slave to another interrupt controller. This is
- typically the case on Armada 375 and Armada 38x, where the MPIC is
- connected as a slave to the Cortex-A9 GIC. The provided interrupt
- indicate to which GIC interrupt the MPIC output is connected.
-
-Example:
-
- mpic: interrupt-controller@d0020000 {
- compatible = "marvell,mpic";
- #interrupt-cells = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-controller;
- msi-controller;
- reg = <0xd0020a00 0x1d0>,
- <0xd0021070 0x58>;
- };
new file mode 100644
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/marvell,mpic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 370, 375, 38x, 39x, XP Interrupt Controller
+
+maintainers:
+ - Marek Behún <kabel@kernel.org>
+
+description: |
+ The top-level interrupt controller on Marvell Armada 370 and XP. On these
+ platforms it also provides inter-processor interrupts.
+
+ On Marvell Armada 375, 38x and 39x this controller is wired under ARM GIC.
+
+ Provides MSI handling for the PCIe controllers.
+
+properties:
+ compatible:
+ const: marvell,mpic
+
+ reg:
+ items:
+ - description: main registers
+ - description: per-cpu registers
+
+ interrupts:
+ items:
+ - description: |
+ Parent interrupt on platforms where MPIC is not the top-level
+ interrupt controller.
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 1
+
+ msi-controller: true
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - '#interrupt-cells'
+ - msi-controller
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ interrupt-controller@20a00 {
+ compatible = "marvell,mpic";
+ reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ msi-controller;
+ };
@@ -2211,6 +2211,7 @@ F: Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm
F: Documentation/devicetree/bindings/bus/moxtet.txt
F: Documentation/devicetree/bindings/firmware/cznic,turris-mox-rwtm.txt
F: Documentation/devicetree/bindings/gpio/gpio-moxtet.txt
+F: Documentation/devicetree/bindings/interrupt-controller/marvell,mpic.yaml
F: Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
F: Documentation/devicetree/bindings/watchdog/armada-37xx-wdt.txt
F: drivers/bus/moxtet.c
Convert the marvell,mpic device-tree binding to YAML. Add myself as maintainer. Signed-off-by: Marek Behún <kabel@kernel.org> --- .../marvell,armada-370-xp-mpic.txt | 38 ----------- .../interrupt-controller/marvell,mpic.yaml | 63 +++++++++++++++++++ MAINTAINERS | 1 + 3 files changed, 64 insertions(+), 38 deletions(-) delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,armada-370-xp-mpic.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,mpic.yaml