| Message ID | 20240701113010.16447-9-kabel@kernel.org (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | ade990619444234d96ee5a79ca6305474c6c687b |
| Delegated to: | Arnd Bergmann |
| Headers | show |
| Series | Turris Omnia MCU driver | expand |
On Mon, Jul 01, 2024 at 01:30:10PM +0200, Marek Behún wrote: > Now that we have the MCU device-tree node, which acts as a GPIO > controller, add GPIO key node for the front button. > > Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Andrew
Marek Behún <kabel@kernel.org> writes: > Now that we have the MCU device-tree node, which acts as a GPIO > controller, add GPIO key node for the front button. > > Signed-off-by: Marek Behún <kabel@kernel.org> Applied on mvebu/dt Thanks, Gregory > --- > .../boot/dts/marvell/armada-385-turris-omnia.dts | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts > index 59079d63fe27..43202890c959 100644 > --- a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts > +++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts > @@ -112,6 +112,19 @@ sfp: sfp { > status = "disabled"; > }; > > + gpio-keys { > + compatible = "gpio-keys"; > + > + front-button { > + label = "Front Button"; > + linux,code = <KEY_VENDOR>; > + linux,can-disable; > + gpios = <&mcu 0 12 GPIO_ACTIVE_HIGH>; > + /* debouncing is done by the microcontroller */ > + debounce-interval = <0>; > + }; > + }; > + > sound { > compatible = "simple-audio-card"; > simple-audio-card,name = "SPDIF"; > -- > 2.44.2
diff --git a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts index 59079d63fe27..43202890c959 100644 --- a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts @@ -112,6 +112,19 @@ sfp: sfp { status = "disabled"; }; + gpio-keys { + compatible = "gpio-keys"; + + front-button { + label = "Front Button"; + linux,code = <KEY_VENDOR>; + linux,can-disable; + gpios = <&mcu 0 12 GPIO_ACTIVE_HIGH>; + /* debouncing is done by the microcontroller */ + debounce-interval = <0>; + }; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "SPDIF";
Now that we have the MCU device-tree node, which acts as a GPIO controller, add GPIO key node for the front button. Signed-off-by: Marek Behún <kabel@kernel.org> --- .../boot/dts/marvell/armada-385-turris-omnia.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+)