[GIT,PULL] Qualcomm Arm32 DeviceTree updates for v6.11

Pull-request

https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-arm32-for-6.11

Message

Bjorn Andersson July 5, 2024, 3:29 a.m. UTC

The following changes since commit 1613e604df0cd359cf2a7fbd9be7a0bcfacfabd0:

  Linux 6.10-rc1 (2024-05-26 15:20:12 -0700)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-arm32-for-6.11

for you to fetch changes up to 2a5454d0fe5684855581f8ad958afbcdc476fd64:

  ARM: dts: qcom: qcom-msm8226-samsung-ms013g: Add initial device tree (2024-07-02 22:15:57 -0500)

----------------------------------------------------------------
Qualcomm Arm32 DeviceTree updates for v6.11

This introduces new support for the Sony Xperia Z3 Compact, HTC One
(M8), Samsung Galaxy Tab 4 8.0 Wi-Fi, Samsung Galaxy Grand 2, and
Samsung Galaxy Note 3 devices.

The Motorola Moto G and Motorola Moto G 4G gains accelerometer and
magnetometer support, with the latter also getting framebuffer supplies
and a temperature sensor wired up.

The SMBB (charger block) is enabled across all MSM8x26 Lumia devices, as
this is used for USB state changes.

The operating mode for SDC regulator is set to HPM on Sony Xperia
"Shinano" family to avoid brownouts on uSD-cards.

The panel on LGE Nexus 5 is connected to the backlight, to make this
turn off on blanking.

MSM8974 is transitioned to use the mailbox-abstraction for invoking
PC interrupts on remote processors.

----------------------------------------------------------------
Adam Honse (1):
      ARM: dts: qcom: msm8974: Add Samsung Galaxy Note 3

Alexandre Messier (1):
      ARM: dts: qcom: Add initial support for HTC One (M8)

André Apitzsch (3):
      ARM: dts: qcom: msm8926-motorola-peregrine: Add accelerometer, magnetometer, regulator
      ARM: dts: qcom: msm8926-motorola-peregrine: Update temperature sensor
      ARM: dts: qcom: msm8926-motorola-peregrine: Add framebuffer supplies

Bryant Mairs (1):
      ARM: dts: qcom: Add support for Samsung Galaxy Tab 4 8.0 Wi-Fi

Dmitry Baryshkov (6):
      ARM: dts: qcom: apq8064: drop #power-domain-cells property of GCC
      ARM: dts: qcom: msm8660: drop #power-domain-cells property of GCC
      ARM: dts: qcom: msm8960: drop #power-domain-cells property of GCC
      ARM: dts: qcom: ipq4019: drop #power-domain-cells property of GCC
      ARM: dts: qcom: ipq8064: drop #power-domain-cells property of GCC
      ARM: dts: qcom: mdm9615: drop #power-domain-cells property of GCC

Krzysztof Kozlowski (2):
      ARM: dts: qcom: use generic node names for Adreno and QFPROM
      ARM: dts: qcom: apq8064: drop incorrect ranges from QFPROM

Luca Weiss (5):
      ARM: dts: qcom: msm8974-hammerhead: Hook up backlight
      ARM: dts: qcom: msm8974-hammerhead: Update gpio hog node name
      ARM: dts: qcom: msm8974: Use proper compatible for APCS syscon
      ARM: dts: qcom: msm8974: Use mboxes properties for APCS
      ARM: dts: qcom: msm8974: Use mboxes in smsm node

Raymond Hackley (1):
      ARM: dts: qcom: qcom-msm8226-samsung-ms013g: Add initial device tree

Rayyan Ansari (1):
      ARM: dts: qcom: msm8226-microsoft-common: Enable smbb explicitly

Stanislav Jakubek (1):
      ARM: dts: qcom: motorola-falcon: add accelerometer, magnetometer

Valeriy Klimin (2):
      ARM: dts: qcom: Add Sony Xperia Z3 Compact smartphone
      ARM: dts: qcom: msm8974-sony-shinano: increase load on l21 for sdhc2

 arch/arm/boot/dts/qcom/Makefile                    |   5 +
 arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts |  53 ++
 .../dts/qcom/qcom-apq8026-samsung-milletwifi.dts   | 573 +++++++++++++++++++++
 arch/arm/boot/dts/qcom/qcom-apq8064.dtsi           |   7 +-
 arch/arm/boot/dts/qcom/qcom-apq8084.dtsi           |   2 +-
 arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi           |   1 -
 arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi           |   3 +-
 arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi           |   1 -
 .../dts/qcom/qcom-msm8226-microsoft-common.dtsi    |   4 +
 .../boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts  | 386 ++++++++++++++
 arch/arm/boot/dts/qcom/qcom-msm8226.dtsi           |   4 +-
 arch/arm/boot/dts/qcom/qcom-msm8660.dtsi           |   1 -
 .../dts/qcom/qcom-msm8926-motorola-peregrine.dts   | 121 +++++
 arch/arm/boot/dts/qcom/qcom-msm8960.dtsi           |   1 -
 .../qcom/qcom-msm8974-lge-nexus5-hammerhead.dts    |   6 +-
 .../boot/dts/qcom/qcom-msm8974-samsung-hlte.dts    | 401 ++++++++++++++
 arch/arm/boot/dts/qcom/qcom-msm8974.dtsi           |  28 +-
 arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts  | 353 +++++++++++++
 .../qcom-msm8974pro-sony-xperia-shinano-aries.dts  |  44 ++
 ...qcom-msm8974pro-sony-xperia-shinano-common.dtsi |   2 +
 20 files changed, 1967 insertions(+), 29 deletions(-)
 create mode 100644 arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts
 create mode 100644 arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
 create mode 100644 arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts
 create mode 100644 arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts
 create mode 100644 arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-aries.dts

Comments

[e-mail] July 8, 2024, 3:11 p.m. UTC | #1

Hello:

This pull request was applied to soc/soc.git (for-next)
by Arnd Bergmann <[e-mail]>:

On Thu,  4 Jul 2024 22:29:24 -0500 you wrote:
> The following changes since commit 1613e604df0cd359cf2a7fbd9be7a0bcfacfabd0:
> 
>   Linux 6.10-rc1 (2024-05-26 15:20:12 -0700)
> 
> are available in the Git repository at:
> 
>   https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-arm32-for-6.11
> 
> [...]

Here is the summary with links:
  - [GIT,PULL] Qualcomm Arm32 DeviceTree updates for v6.11
    https://git.kernel.org/soc/soc/c/a9fe0720f244

You are awesome, thank you!