diff mbox series

[v1,03/10] clk: ast2700: add clock controller

Message ID 20240726110355.2181563-4-kevin_chen@aspeedtech.com (mailing list archive)
State Changes Requested
Headers show
Series Introduce ASPEED AST27XX BMC SoC | expand

Commit Message

Kevin Chen July 26, 2024, 11:03 a.m. UTC
Signed-off-by: Kevin Chen <kevin_chen@aspeedtech.com>
---
 drivers/clk/Makefile      |    1 +
 drivers/clk/clk-ast2700.c | 1166 +++++++++++++++++++++++++++++++++++++
 2 files changed, 1167 insertions(+)
 create mode 100644 drivers/clk/clk-ast2700.c

Comments

Krzysztof Kozlowski July 26, 2024, 11:13 a.m. UTC | #1
On 26/07/2024 13:03, Kevin Chen wrote:
> Signed-off-by: Kevin Chen <kevin_chen@aspeedtech.com>

So you did not write commit msgs to none of the commits?

> ---
>  drivers/clk/Makefile      |    1 +
>  drivers/clk/clk-ast2700.c | 1166 +++++++++++++++++++++++++++++++++++++
>  2 files changed, 1167 insertions(+)
>  create mode 100644 drivers/clk/clk-ast2700.c
> 
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index f793a16cad40..0d5992ea0fa4 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -38,6 +38,7 @@ obj-$(CONFIG_COMMON_CLK_FSL_SAI)	+= clk-fsl-sai.o
>  obj-$(CONFIG_COMMON_CLK_GEMINI)		+= clk-gemini.o
>  obj-$(CONFIG_COMMON_CLK_ASPEED)		+= clk-aspeed.o
>  obj-$(CONFIG_MACH_ASPEED_G6)		+= clk-ast2600.o
> +obj-$(CONFIG_MACH_ASPEED_G7)		+= clk-ast2700.o

...

> +
> +static const char *const pspclk_sel[] = {
> +	"soc0-mpll",
> +	"soc0-hpll",
> +};
> +
> +static const char *const soc0_uartclk_sel[] = {
> +	"soc0-clk24Mhz",
> +	"soc0-clk192Mhz",
> +};
> +
> +static const char *const emmcclk_sel[] = {
> +	"soc0-mpll_div4",
> +	"soc0-hpll_div4",
> +};
> +
> +static int ast2700_soc0_clk_init(struct device_node *soc0_node)
> +{
> +	struct clk_hw_onecell_data *clk_data;
> +	void __iomem *clk_base;
> +	struct ast2700_reset *reset;
> +	struct clk_hw **clks;
> +	int div;
> +	u32 val;
> +	int ret;
> +
> +	clk_data = kzalloc(struct_size(clk_data, hws, SOC0_NUM_CLKS), GFP_KERNEL);
> +	if (!clk_data)
> +		return -ENOMEM;
> +
> +	clk_data->num = SOC0_NUM_CLKS;
> +	clks = clk_data->hws;
> +
> +	clk_base = of_iomap(soc0_node, 0);
> +	if (WARN_ON(IS_ERR(clk_base)))

Drop WARN_ON

> +		return PTR_ERR(clk_base);
> +
> +	reset = kzalloc(sizeof(*reset), GFP_KERNEL);
> +	if (!reset)
> +		return -ENOMEM;
> +
> +	reset->base = clk_base;
> +
> +	reset->rcdev.owner = THIS_MODULE;
> +	reset->rcdev.nr_resets = SOC0_RESET_NUMS;
> +	reset->rcdev.ops = &ast2700_reset_ops;
> +	reset->rcdev.of_node = soc0_node;
> +
> +	ret = reset_controller_register(&reset->rcdev);
> +	if (ret) {
> +		pr_err("soc0 failed to register reset controller\n");
> +		return ret;
> +	}
> +
> +	//refclk

Weird comment. Please read Coding Style.


> +	clks[SCU0_CLKIN] =
> +		clk_hw_register_fixed_rate(NULL, "soc0-clkin", NULL, 0, SCU_CLK_25MHZ);
> +
> +	clks[SCU0_CLK_24M] =
> +		clk_hw_register_fixed_rate(NULL, "soc0-clk24Mhz", NULL, 0, SCU_CLK_24MHZ);
> +
> +	clks[SCU0_CLK_192M] =
> +		clk_hw_register_fixed_rate(NULL, "soc0-clk192Mhz", NULL, 0, SCU_CLK_192MHZ);
> +
> +	//hpll
> +	val = readl(clk_base + SCU0_HWSTRAP1);
> +	if ((val & GENMASK(3, 2)) != 0) {
> +		switch ((val & GENMASK(3, 2)) >> 2) {
> +		case 1:
> +			clks[SCU0_CLK_HPLL] =
> +				clk_hw_register_fixed_rate(NULL, "soc0-hpll", NULL, 0, 1900000000);
> +			break;
> +		case 2:
> +			clks[SCU0_CLK_HPLL] =
> +				clk_hw_register_fixed_rate(NULL, "soc0-hpll", NULL, 0, 1800000000);
> +			break;
> +		case 3:
> +			clks[SCU0_CLK_HPLL] =
> +				clk_hw_register_fixed_rate(NULL, "soc0-hpll", NULL, 0, 1700000000);
> +			break;
> +		}
> +	} else {
> +		val = readl(clk_base + SCU0_HPLL_PARAM);
> +		clks[SCU0_CLK_HPLL] = ast2700_soc0_hw_pll("soc0-hpll", "soc0-clkin", val);
> +	}
> +	clks[SCU0_CLK_HPLL_DIV2] = clk_hw_register_fixed_factor(NULL, "soc0-hpll_div2", "soc0-hpll", 0, 1, 2);
> +	clks[SCU0_CLK_HPLL_DIV4] = clk_hw_register_fixed_factor(NULL, "soc0-hpll_div4", "soc0-hpll", 0, 1, 4);
> +
> +	//dpll



Best regards,
Krzysztof
Kevin Chen Aug. 15, 2024, 5:50 a.m. UTC | #2
Hi Krzk,

I will speperate clock part in the v3 patch into Ryan's clock series.


>So you did not write commit msgs to none of the commits?
>
>> ---
>>  drivers/clk/Makefile      |    1 +
>>  drivers/clk/clk-ast2700.c | 1166 +++++++++++++++++++++++++++++++++++++
>>  2 files changed, 1167 insertions(+)
>>  create mode 100644 drivers/clk/clk-ast2700.c
>>
>> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
>> index f793a16cad40..0d5992ea0fa4 100644
>> --- a/drivers/clk/Makefile
>> +++ b/drivers/clk/Makefile
>> @@ -38,6 +38,7 @@ obj-$(CONFIG_COMMON_CLK_FSL_SAI)    += clk-fsl-sai.o
>>  obj-$(CONFIG_COMMON_CLK_GEMINI)              += clk-gemini.o
>>  obj-$(CONFIG_COMMON_CLK_ASPEED)              += clk-aspeed.o
>>  obj-$(CONFIG_MACH_ASPEED_G6)         += clk-ast2600.o
>> +obj-$(CONFIG_MACH_ASPEED_G7)         += clk-ast2700.o
>
>...
>
>> +
>> +static const char *const pspclk_sel[] = {
>> +     "soc0-mpll",
>> +     "soc0-hpll",
>> +};
>> +
>> +static const char *const soc0_uartclk_sel[] = {
>> +     "soc0-clk24Mhz",
>> +     "soc0-clk192Mhz",
>> +};
>> +
>> +static const char *const emmcclk_sel[] = {
>> +     "soc0-mpll_div4",
>> +     "soc0-hpll_div4",
>> +};
>> +
>> +static int ast2700_soc0_clk_init(struct device_node *soc0_node)
>> +{
>> +     struct clk_hw_onecell_data *clk_data;
>> +     void __iomem *clk_base;
>> +     struct ast2700_reset *reset;
>> +     struct clk_hw **clks;
>> +     int div;
>> +     u32 val;
>> +     int ret;
>> +
>> +     clk_data = kzalloc(struct_size(clk_data, hws, SOC0_NUM_CLKS), GFP_KERNEL);
>> +     if (!clk_data)
>> +             return -ENOMEM;
>> +
>> +     clk_data->num = SOC0_NUM_CLKS;
>> +     clks = clk_data->hws;
>> +
>> +     clk_base = of_iomap(soc0_node, 0);
>> +     if (WARN_ON(IS_ERR(clk_base)))
>
>Drop WARN_ON
I remind Ryan for this fix. He will reply in these series.
[4/4] dt-bindings: clock: Add AST2700 clock bindings - Patchwork (kernel.org)<https://patchwork.kernel.org/project/linux-clk/patch/20240808075937.2756733-5-ryan_chen@aspeedtech.com/>


>> +             return PTR_ERR(clk_base);
>> +
>> +     reset = kzalloc(sizeof(*reset), GFP_KERNEL);
>> +     if (!reset)
>> +             return -ENOMEM;
>> +
>> +     reset->base = clk_base;
>> +
>> +     reset->rcdev.owner = THIS_MODULE;
>> +     reset->rcdev.nr_resets = SOC0_RESET_NUMS;
>> +     reset->rcdev.ops = &ast2700_reset_ops;
>> +     reset->rcdev.of_node = soc0_node;
>> +
>> +     ret = reset_controller_register(&reset->rcdev);
>> +     if (ret) {
>> +             pr_err("soc0 failed to register reset controller\n");
>> +             return ret;
>> +     }
>> +
>> +     //refclk
>
>Weird comment. Please read Coding Style.
I remind Ryan for this fix. He will reply in these series.
[4/4] dt-bindings: clock: Add AST2700 clock bindings - Patchwork (kernel.org)<https://patchwork.kernel.org/project/linux-clk/patch/20240808075937.2756733-5-ryan_chen@aspeedtech.com/>

>
>
>> +     clks[SCU0_CLKIN] =
>> +             clk_hw_register_fixed_rate(NULL, "soc0-clkin", NULL, 0, SCU_CLK_25MHZ);
>> +
>> +     clks[SCU0_CLK_24M] =
>> +             clk_hw_register_fixed_rate(NULL, "soc0-clk24Mhz", NULL, 0, SCU_CLK_24MHZ);
>> +
>> +     clks[SCU0_CLK_192M] =
>> +             clk_hw_register_fixed_rate(NULL, "soc0-clk192Mhz", NULL, 0, SCU_CLK_192MHZ);
>> +
>> +     //hpll
>> +     val = readl(clk_base + SCU0_HWSTRAP1);
>> +     if ((val & GENMASK(3, 2)) != 0) {
>> +             switch ((val & GENMASK(3, 2)) >> 2) {
>> +             case 1:
>> +                     clks[SCU0_CLK_HPLL] =
>> +                             clk_hw_register_fixed_rate(NULL, "soc0-hpll", NULL, 0, 1900000000);
>> +                     break;
>> +             case 2:
>> +                     clks[SCU0_CLK_HPLL] =
>> +                             clk_hw_register_fixed_rate(NULL, "soc0-hpll", NULL, 0, 1800000000);
>> +                     break;
>> +             case 3:
>> +                     clks[SCU0_CLK_HPLL] =
>> +                             clk_hw_register_fixed_rate(NULL, "soc0-hpll", NULL, 0, 1700000000);
>> +                     break;
>> +             }
>> +     } else {
>> +             val = readl(clk_base + SCU0_HPLL_PARAM);
>> +             clks[SCU0_CLK_HPLL] = ast2700_soc0_hw_pll("soc0-hpll", "soc0-clkin", val);
>> +     }
>> +     clks[SCU0_CLK_HPLL_DIV2] = clk_hw_register_fixed_factor(NULL, "soc0-hpll_div2", "soc0-hpll", 0, 1, 2);
>> +     clks[SCU0_CLK_HPLL_DIV4] = clk_hw_register_fixed_factor(NULL, "soc0-hpll_div4", "soc0-hpll", 0, 1, 4);
>> +
>> +     //dpll
>

--
Best Regards,
Kevin. Chen
Kevin Chen Aug. 16, 2024, 4:06 a.m. UTC | #3
Hi Krzk,

I will separate clock part in the v3 patch into Ryan's clock series.
>
> So you did not write commit msgs to none of the commits?
>
> > ---
> >  drivers/clk/Makefile      |    1 +
> >  drivers/clk/clk-ast2700.c | 1166
> > +++++++++++++++++++++++++++++++++++++
> >  2 files changed, 1167 insertions(+)
> >  create mode 100644 drivers/clk/clk-ast2700.c
> >
> > diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index
> > f793a16cad40..0d5992ea0fa4 100644
> > --- a/drivers/clk/Makefile
> > +++ b/drivers/clk/Makefile
> > @@ -38,6 +38,7 @@ obj-$(CONFIG_COMMON_CLK_FSL_SAI)  += clk-fsl-sai.o
> >  obj-$(CONFIG_COMMON_CLK_GEMINI)            += clk-gemini.o
> >  obj-$(CONFIG_COMMON_CLK_ASPEED)            += clk-aspeed.o
> >  obj-$(CONFIG_MACH_ASPEED_G6)               += clk-ast2600.o
> > +obj-$(CONFIG_MACH_ASPEED_G7)               += clk-ast2700.o
>
> ...
>
> > +
> > +static const char *const pspclk_sel[] = {
> > +   "soc0-mpll",
> > +   "soc0-hpll",
> > +};
> > +
> > +static const char *const soc0_uartclk_sel[] = {
> > +   "soc0-clk24Mhz",
> > +   "soc0-clk192Mhz",
> > +};
> > +
> > +static const char *const emmcclk_sel[] = {
> > +   "soc0-mpll_div4",
> > +   "soc0-hpll_div4",
> > +};
> > +
> > +static int ast2700_soc0_clk_init(struct device_node *soc0_node) {
> > +   struct clk_hw_onecell_data *clk_data;
> > +   void __iomem *clk_base;
> > +   struct ast2700_reset *reset;
> > +   struct clk_hw **clks;
> > +   int div;
> > +   u32 val;
> > +   int ret;
> > +
> > +   clk_data = kzalloc(struct_size(clk_data, hws, SOC0_NUM_CLKS),
> GFP_KERNEL);
> > +   if (!clk_data)
> > +           return -ENOMEM;
> > +
> > +   clk_data->num = SOC0_NUM_CLKS;
> > +   clks = clk_data->hws;
> > +
> > +   clk_base = of_iomap(soc0_node, 0);
> > +   if (WARN_ON(IS_ERR(clk_base)))
>
> Drop WARN_ON
I remind Ryan for this fix. He will reply in these series.
https://patchwork.kernel.org/project/linux-clk/patch/20240808075937.2756733-5-ryan_chen@aspeedtech.com/

>
> > +           return PTR_ERR(clk_base);
> > +
> > +   reset = kzalloc(sizeof(*reset), GFP_KERNEL);
> > +   if (!reset)
> > +           return -ENOMEM;
> > +
> > +   reset->base = clk_base;
> > +
> > +   reset->rcdev.owner = THIS_MODULE;
> > +   reset->rcdev.nr_resets = SOC0_RESET_NUMS;
> > +   reset->rcdev.ops = &ast2700_reset_ops;
> > +   reset->rcdev.of_node = soc0_node;
> > +
> > +   ret = reset_controller_register(&reset->rcdev);
> > +   if (ret) {
> > +           pr_err("soc0 failed to register reset controller\n");
> > +           return ret;
> > +   }
> > +
> > +   //refclk
>
> Weird comment. Please read Coding Style.
I remind Ryan for this fix. He will reply in these series.
https://patchwork.kernel.org/project/linux-clk/patch/20240808075937.2756733-5-ryan_chen@aspeedtech.com/

>
>
> > +   clks[SCU0_CLKIN] =
> > +           clk_hw_register_fixed_rate(NULL, "soc0-clkin", NULL, 0,
> > +SCU_CLK_25MHZ);
> > +
> > +   clks[SCU0_CLK_24M] =
> > +           clk_hw_register_fixed_rate(NULL, "soc0-clk24Mhz", NULL, 0,
> > +SCU_CLK_24MHZ);
> > +
> > +   clks[SCU0_CLK_192M] =
> > +           clk_hw_register_fixed_rate(NULL, "soc0-clk192Mhz", NULL, 0,
> > +SCU_CLK_192MHZ);
> > +
> > +   //hpll
> > +   val = readl(clk_base + SCU0_HWSTRAP1);
> > +   if ((val & GENMASK(3, 2)) != 0) {
> > +           switch ((val & GENMASK(3, 2)) >> 2) {
> > +           case 1:
> > +                   clks[SCU0_CLK_HPLL] =
> > +                           clk_hw_register_fixed_rate(NULL, "soc0-hpll", NULL, 0,
> 1900000000);
> > +                   break;
> > +           case 2:
> > +                   clks[SCU0_CLK_HPLL] =
> > +                           clk_hw_register_fixed_rate(NULL, "soc0-hpll", NULL, 0,
> 1800000000);
> > +                   break;
> > +           case 3:
> > +                   clks[SCU0_CLK_HPLL] =
> > +                           clk_hw_register_fixed_rate(NULL, "soc0-hpll", NULL, 0,
> 1700000000);
> > +                   break;
> > +           }
> > +   } else {
> > +           val = readl(clk_base + SCU0_HPLL_PARAM);
> > +           clks[SCU0_CLK_HPLL] = ast2700_soc0_hw_pll("soc0-hpll",
> "soc0-clkin", val);
> > +   }
> > +   clks[SCU0_CLK_HPLL_DIV2] = clk_hw_register_fixed_factor(NULL,
> "soc0-hpll_div2", "soc0-hpll", 0, 1, 2);
> > +   clks[SCU0_CLK_HPLL_DIV4] = clk_hw_register_fixed_factor(NULL,
> > +"soc0-hpll_div4", "soc0-hpll", 0, 1, 4);
> > +
> > +   //dpll
>
>
>
> Best regards,
> Krzysztof

--
Best Regards,
Kevin.Chen
************* Email Confidentiality Notice ********************
免責聲明:
本信件(或其附件)可能包含機密資訊,並受法律保護。如 台端非指定之收件者,請以電子郵件通知本電子郵件之發送者, 並請立即刪除本電子郵件及其附件和銷毀所有複印件。謝謝您的合作!

DISCLAIMER:
This message (and any attachments) may contain legally privileged and/or other confidential information. If you have received it in error, please notify the sender by reply e-mail and immediately delete the e-mail and any attachments without copying or disclosing the contents. Thank you.
diff mbox series

Patch

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index f793a16cad40..0d5992ea0fa4 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -38,6 +38,7 @@  obj-$(CONFIG_COMMON_CLK_FSL_SAI)	+= clk-fsl-sai.o
 obj-$(CONFIG_COMMON_CLK_GEMINI)		+= clk-gemini.o
 obj-$(CONFIG_COMMON_CLK_ASPEED)		+= clk-aspeed.o
 obj-$(CONFIG_MACH_ASPEED_G6)		+= clk-ast2600.o
+obj-$(CONFIG_MACH_ASPEED_G7)		+= clk-ast2700.o
 obj-$(CONFIG_ARCH_HIGHBANK)		+= clk-highbank.o
 obj-$(CONFIG_CLK_HSDK)			+= clk-hsdk-pll.o
 obj-$(CONFIG_COMMON_CLK_K210)		+= clk-k210.o
diff --git a/drivers/clk/clk-ast2700.c b/drivers/clk/clk-ast2700.c
new file mode 100644
index 000000000000..04049f1f1661
--- /dev/null
+++ b/drivers/clk/clk-ast2700.c
@@ -0,0 +1,1166 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright ASPEED Technology
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/reset-controller.h>
+
+#include <dt-bindings/clock/aspeed,ast2700-clk.h>
+#include <dt-bindings/reset/aspeed,ast2700-reset.h>
+
+#define SCU_CLK_24MHZ 24000000
+#define SCU_CLK_25MHZ 25000000
+#define SCU_CLK_192MHZ 192000000
+/* SOC0 USB2 PHY CLK*/
+#define SCU_CLK_12MHZ 12000000
+/* SOC0 */
+#define SCU0_HWSTRAP1 0x010
+#define SCU0_CLK_STOP 0x240
+#define SCU0_CLK_SEL1 0x280
+#define SCU0_CLK_SEL2 0x284
+#define GET_USB_REFCLK_DIV(x) ((GENMASK(23, 20) & (x)) >> 20)
+#define UART_DIV13_EN BIT(30)
+#define SCU0_HPLL_PARAM 0x300
+#define SCU0_DPLL_PARAM 0x308
+#define SCU0_MPLL_PARAM 0x310
+#define SCU0_D1CLK_PARAM 0x320
+#define SCU0_D2CLK_PARAM 0x330
+#define SCU0_CRT1CLK_PARAM 0x340
+#define SCU0_CRT2CLK_PARAM 0x350
+#define SCU0_MPHYCLK_PARAM 0x360
+
+/* SOC1 */
+#define SCU1_CLK_STOP 0x240
+#define SCU1_CLK_STOP2 0x260
+#define SCU1_CLK_SEL1 0x280
+#define SCU1_CLK_SEL2 0x284
+#define UXCLK_MASK GENMASK(1, 0)
+#define HUXCLK_MASK GENMASK(4, 3)
+#define SCU1_HPLL_PARAM 0x300
+#define SCU1_APLL_PARAM 0x310
+#define SCU1_DPLL_PARAM 0x320
+#define SCU1_UXCLK_CTRL 0x330
+#define SCU1_HUXCLK_CTRL 0x334
+#define SCU1_MAC12_CLK_DLY 0x390
+#define SCU1_MAC12_CLK_DLY_100M 0x394
+#define SCU1_MAC12_CLK_DLY_10M 0x398
+
+/*
+ * MAC Clock Delay settings
+ */
+#define MAC_CLK_RMII1_50M_RCLK_O_CTRL		BIT(30)
+#define   MAC_CLK_RMII1_50M_RCLK_O_DIS		0
+#define   MAC_CLK_RMII1_50M_RCLK_O_EN		1
+#define MAC_CLK_RMII0_50M_RCLK_O_CTRL		BIT(29)
+#define   MAC_CLK_RMII0_5M_RCLK_O_DIS		0
+#define   MAC_CLK_RMII0_5M_RCLK_O_EN		1
+#define MAC_CLK_RMII_TXD_FALLING_2		BIT(27)
+#define MAC_CLK_RMII_TXD_FALLING_1		BIT(26)
+#define MAC_CLK_RXCLK_INV_2			BIT(25)
+#define MAC_CLK_RXCLK_INV_1			BIT(24)
+#define MAC_CLK_1G_INPUT_DELAY_2		GENMASK(23, 18)
+#define MAC_CLK_1G_INPUT_DELAY_1		GENMASK(17, 12)
+#define MAC_CLK_1G_OUTPUT_DELAY_2		GENMASK(11, 6)
+#define MAC_CLK_1G_OUTPUT_DELAY_1		GENMASK(5, 0)
+
+#define MAC_CLK_100M_10M_RESERVED		GENMASK(31, 26)
+#define MAC_CLK_100M_10M_RXCLK_INV_2		BIT(25)
+#define MAC_CLK_100M_10M_RXCLK_INV_1		BIT(24)
+#define MAC_CLK_100M_10M_INPUT_DELAY_2		GENMASK(23, 18)
+#define MAC_CLK_100M_10M_INPUT_DELAY_1		GENMASK(17, 12)
+#define MAC_CLK_100M_10M_OUTPUT_DELAY_2		GENMASK(11, 6)
+#define MAC_CLK_100M_10M_OUTPUT_DELAY_1		GENMASK(5, 0)
+
+#define AST2700_DEF_MAC12_DELAY_1G	0x00CF4D75
+#define AST2700_DEF_MAC12_DELAY_100M	0x00410410
+#define AST2700_DEF_MAC12_DELAY_10M	0x00410410
+
+struct mac_delay_config {
+	u32 tx_delay_1000;
+	u32 rx_delay_1000;
+	u32 tx_delay_100;
+	u32 rx_delay_100;
+	u32 tx_delay_10;
+	u32 rx_delay_10;
+};
+
+/* Globally visible clocks */
+static DEFINE_SPINLOCK(ast2700_clk_lock);
+
+/* Division of RGMII Clock */
+static const struct clk_div_table ast2700_rgmii_div_table[] = {
+	{ 0x0, 4 },
+	{ 0x1, 4 },
+	{ 0x2, 6 },
+	{ 0x3, 8 },
+	{ 0x4, 10 },
+	{ 0x5, 12 },
+	{ 0x6, 14 },
+	{ 0x7, 16 },
+	{ 0 }
+};
+
+/* Division of RMII Clock */
+static const struct clk_div_table ast2700_rmii_div_table[] = {
+	{ 0x0, 8 },
+	{ 0x1, 8 },
+	{ 0x2, 12 },
+	{ 0x3, 16 },
+	{ 0x4, 20 },
+	{ 0x5, 24 },
+	{ 0x6, 28 },
+	{ 0x7, 32 },
+	{ 0 }
+};
+
+/* Division of HCLK/SDIO/MAC/apll_divn CLK */
+static const struct clk_div_table ast2700_clk_div_table[] = {
+	{ 0x0, 2 },
+	{ 0x1, 2 },
+	{ 0x2, 3 },
+	{ 0x3, 4 },
+	{ 0x4, 5 },
+	{ 0x5, 6 },
+	{ 0x6, 7 },
+	{ 0x7, 8 },
+	{ 0 }
+};
+
+/* Division of PCLK/EMMC CLK */
+static const struct clk_div_table ast2700_clk_div_table2[] = {
+	{ 0x0, 2 },
+	{ 0x1, 4 },
+	{ 0x2, 6 },
+	{ 0x3, 8 },
+	{ 0x4, 10 },
+	{ 0x5, 12 },
+	{ 0x6, 14 },
+	{ 0x7, 16 },
+	{ 0 }
+};
+
+/* HPLL/DPLL: 2000Mhz(default) */
+struct clk_hw *ast2700_soc0_hw_pll(const char *name, const char *parent_name, u32 val)
+{
+	unsigned int mult, div;
+
+	if (val & BIT(24)) {
+		/* Pass through mode */
+		mult = 1;
+		div = 1;
+	} else {
+		/* F = CLKIN(25MHz) * [(M+1) / 2(N+1)] / (P+1) */
+		u32 m = val & 0x1fff;
+		u32 n = (val >> 13) & 0x3f;
+		u32 p = (val >> 19) & 0xf;
+
+		mult = (m + 1) / (2 * (n + 1));
+		div = (p + 1);
+	}
+
+	return clk_hw_register_fixed_factor(NULL, name, parent_name, 0, mult, div);
+};
+
+/* MPLL 1600Mhz(default) */
+struct clk_hw *ast2700_calc_mpll(const char *name, const char *parent_name, u32 val)
+{
+	unsigned int mult, div;
+
+	if (val & BIT(24)) {
+		/* Pass through mode */
+		div = 1;
+		mult = div;
+	} else {
+		/* F = CLKIN(25MHz) * [CLKF/(CLKR+1)] /(CLKOD+1) */
+		u32 m = val & 0x1fff;
+		u32 n = (val >> 13) & 0x3f;
+		u32 p = (val >> 19) & 0xf;
+
+		mult = m / (n + 1);
+		div = (p + 1);
+	}
+	return clk_hw_register_fixed_factor(NULL, name, parent_name, 0, mult, div);
+};
+
+static struct clk_hw *ast2700_calc_uclk(const char *name, u32 val)
+{
+	unsigned int mult, div;
+
+	/* UARTCLK = UXCLK * R / (N * 2) */
+	u32 r = val & 0xff;
+	u32 n = (val >> 8) & 0x3ff;
+
+	mult = r;
+	div = n * 2;
+
+	return clk_hw_register_fixed_factor(NULL, name, "uxclk", 0, mult, div);
+};
+
+static struct clk_hw *ast2700_calc_huclk(const char *name, u32 val)
+{
+	unsigned int mult, div;
+
+	/* UARTCLK = UXCLK * R / (N * 2) */
+	u32 r = val & 0xff;
+	u32 n = (val >> 8) & 0x3ff;
+
+	mult = r;
+	div = n * 2;
+
+	return clk_hw_register_fixed_factor(NULL, name, "huxclk", 0, mult, div);
+};
+
+struct clk_hw *ast2700_calc_soc1_pll(const char *name, const char *parent_name, u32 val)
+{
+	unsigned int mult, div;
+
+	if (val & BIT(24)) {
+		/* Pass through mode */
+		div = 1;
+		mult = div;
+	} else {
+		/* F = 25Mhz * [(M + 1) / (n + 1)] / (p + 1) */
+		u32 m = val & 0x1fff;
+		u32 n = (val >> 13) & 0x3f;
+		u32 p = (val >> 19) & 0xf;
+
+		mult = (m + 1) / (n + 1);
+		div = (p + 1);
+	}
+	return clk_hw_register_fixed_factor(NULL, name, parent_name, 0, mult, div);
+};
+
+static int ast2700_clk_is_enabled(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	u32 clk = BIT(gate->bit_idx);
+	u32 reg;
+
+	reg = readl(gate->reg);
+
+	return !(reg & clk);
+}
+
+static int ast2700_clk_enable(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	u32 clk = BIT(gate->bit_idx);
+
+	if (readl(gate->reg) & clk)
+		writel(clk, gate->reg + 0x04);
+
+	return 0;
+}
+
+static void ast2700_clk_disable(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	u32 clk = BIT(gate->bit_idx);
+
+	/* Clock is set to enable, so use write to set register */
+	writel(clk, gate->reg);
+}
+
+static const struct clk_ops ast2700_clk_gate_ops = {
+	.enable = ast2700_clk_enable,
+	.disable = ast2700_clk_disable,
+	.is_enabled = ast2700_clk_is_enabled,
+};
+
+static struct clk_hw *ast2700_clk_hw_register_gate(struct device *dev, const char *name,
+						   const char *parent_name, unsigned long flags,
+						   void __iomem *reg, u8 clock_idx,
+						   u8 clk_gate_flags, spinlock_t *lock)
+{
+	struct clk_gate *gate;
+	struct clk_hw *hw;
+	struct clk_init_data init;
+	int ret = -EINVAL;
+
+	gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+	if (!gate)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &ast2700_clk_gate_ops;
+	init.flags = flags;
+	init.parent_names = parent_name ? &parent_name : NULL;
+	init.num_parents = parent_name ? 1 : 0;
+
+	gate->reg = reg;
+	gate->bit_idx = clock_idx;
+	gate->flags = clk_gate_flags;
+	gate->lock = lock;
+	gate->hw.init = &init;
+
+	hw = &gate->hw;
+	ret = clk_hw_register(dev, hw);
+	if (ret) {
+		kfree(gate);
+		hw = ERR_PTR(ret);
+	}
+
+	return hw;
+}
+
+struct ast2700_reset {
+	void __iomem *base;
+	struct reset_controller_dev rcdev;
+};
+
+#define to_rc_data(p) container_of(p, struct ast2700_reset, rcdev)
+
+static int ast2700_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	struct ast2700_reset *rc = to_rc_data(rcdev);
+	u32 rst = BIT(id % 32);
+	u32 reg = id >= 32 ? 0x220 : 0x200;
+
+	writel(rst, rc->base + reg);
+	return 0;
+}
+
+static int ast2700_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	struct ast2700_reset *rc = to_rc_data(rcdev);
+	u32 rst = BIT(id % 32);
+	u32 reg = id >= 32 ? 0x220 : 0x200;
+
+	/* Use set to clear register */
+	writel(rst, rc->base + reg + 0x04);
+	return 0;
+}
+
+static int ast2700_reset_status(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	struct ast2700_reset *rc = to_rc_data(rcdev);
+	u32 rst = BIT(id % 32);
+	u32 reg = id >= 32 ? 0x220 : 0x200;
+
+	return (readl(rc->base + reg) & rst);
+}
+
+static const struct reset_control_ops ast2700_reset_ops = {
+	.assert = ast2700_reset_assert,
+	.deassert = ast2700_reset_deassert,
+	.status = ast2700_reset_status,
+};
+
+static const char *const sdclk_sel[] = {
+	"soc1-hpll",
+	"soc1-apll",
+};
+
+static const char *const uartclk_sel[] = {
+	"uartxclk",
+	"huartxclk",
+};
+
+static const char *const uxclk_sel[] = {
+	"soc1-apll_div4",
+	"soc1-apll_div2",
+	"soc1-apll",
+	"soc1-hpll",
+};
+
+static void ast2700_soc1_configure_mac01_clk(struct device_node *np)
+{
+	void __iomem *clk_base;
+	struct mac_delay_config mac_cfg;
+	u32 reg[3];
+	int ret;
+
+	clk_base = of_iomap(np, 0);
+	WARN_ON(!clk_base);
+
+	reg[0] = AST2700_DEF_MAC12_DELAY_1G;
+	reg[1] = AST2700_DEF_MAC12_DELAY_100M;
+	reg[2] = AST2700_DEF_MAC12_DELAY_10M;
+
+	ret = of_property_read_u32_array(np, "mac0-clk-delay", (u32 *)&mac_cfg,
+					 sizeof(mac_cfg) / sizeof(u32));
+	if (!ret) {
+		reg[0] &= ~(MAC_CLK_1G_INPUT_DELAY_1 | MAC_CLK_1G_OUTPUT_DELAY_1);
+		reg[0] |= FIELD_PREP(MAC_CLK_1G_INPUT_DELAY_1, mac_cfg.rx_delay_1000) |
+			  FIELD_PREP(MAC_CLK_1G_OUTPUT_DELAY_1, mac_cfg.tx_delay_1000);
+
+		reg[1] &= ~(MAC_CLK_100M_10M_INPUT_DELAY_1 | MAC_CLK_100M_10M_OUTPUT_DELAY_1);
+		reg[1] |= FIELD_PREP(MAC_CLK_100M_10M_INPUT_DELAY_1, mac_cfg.rx_delay_100) |
+			  FIELD_PREP(MAC_CLK_100M_10M_OUTPUT_DELAY_1, mac_cfg.tx_delay_100);
+
+		reg[2] &= ~(MAC_CLK_100M_10M_INPUT_DELAY_1 | MAC_CLK_100M_10M_OUTPUT_DELAY_1);
+		reg[2] |= FIELD_PREP(MAC_CLK_100M_10M_INPUT_DELAY_1, mac_cfg.rx_delay_10) |
+			  FIELD_PREP(MAC_CLK_100M_10M_OUTPUT_DELAY_1, mac_cfg.tx_delay_10);
+	}
+
+	ret = of_property_read_u32_array(np, "mac1-clk-delay", (u32 *)&mac_cfg,
+					 sizeof(mac_cfg) / sizeof(u32));
+	if (!ret) {
+		reg[0] &= ~(MAC_CLK_1G_INPUT_DELAY_2 | MAC_CLK_1G_OUTPUT_DELAY_2);
+		reg[0] |= FIELD_PREP(MAC_CLK_1G_INPUT_DELAY_2, mac_cfg.rx_delay_1000) |
+			  FIELD_PREP(MAC_CLK_1G_OUTPUT_DELAY_2, mac_cfg.tx_delay_1000);
+
+		reg[1] &= ~(MAC_CLK_100M_10M_INPUT_DELAY_2 | MAC_CLK_100M_10M_OUTPUT_DELAY_2);
+		reg[1] |= FIELD_PREP(MAC_CLK_100M_10M_INPUT_DELAY_2, mac_cfg.rx_delay_100) |
+			  FIELD_PREP(MAC_CLK_100M_10M_OUTPUT_DELAY_2, mac_cfg.tx_delay_100);
+
+		reg[2] &= ~(MAC_CLK_100M_10M_INPUT_DELAY_2 | MAC_CLK_100M_10M_OUTPUT_DELAY_2);
+		reg[2] |= FIELD_PREP(MAC_CLK_100M_10M_INPUT_DELAY_2, mac_cfg.rx_delay_10) |
+			  FIELD_PREP(MAC_CLK_100M_10M_OUTPUT_DELAY_2, mac_cfg.tx_delay_10);
+	}
+
+	reg[0] |= (readl(clk_base + SCU1_MAC12_CLK_DLY) & ~GENMASK(25, 0));
+	writel(reg[0], clk_base + SCU1_MAC12_CLK_DLY);
+	writel(reg[1], clk_base + SCU1_MAC12_CLK_DLY_100M);
+	writel(reg[2], clk_base + SCU1_MAC12_CLK_DLY_10M);
+}
+
+static int ast2700_soc1_clk_init(struct device_node *soc1_node)
+{
+	struct clk_hw_onecell_data *clk_data;
+	struct ast2700_reset *reset;
+	u32 uart_clk_source = 0;
+	void __iomem *clk_base;
+	struct clk_hw **clks;
+	u32 val, id;
+	int ret;
+
+	clk_base = of_iomap(soc1_node, 0);
+	WARN_ON(!clk_base);
+
+	clk_data = kzalloc(struct_size(clk_data, hws, SOC1_NUM_CLKS), GFP_KERNEL);
+	if (!clk_data)
+		return -ENOMEM;
+
+	clk_data->num = SOC1_NUM_CLKS;
+	clks = clk_data->hws;
+
+	reset = kzalloc(sizeof(*reset), GFP_KERNEL);
+	if (!reset)
+		return -ENOMEM;
+
+	reset->base = clk_base;
+
+	reset->rcdev.owner = THIS_MODULE;
+	reset->rcdev.nr_resets = SOC1_RESET_NUMS;
+	reset->rcdev.ops = &ast2700_reset_ops;
+	reset->rcdev.of_node = soc1_node;
+
+	ret = reset_controller_register(&reset->rcdev);
+	if (ret) {
+		pr_err("soc1 failed to register reset controller\n");
+		return ret;
+	}
+	/*
+	 * Ast2700 A0 workaround:
+	 * I3C reset should assert all of the I3C controllers simultaneously.
+	 * Otherwise, it may lead to failure in accessing I3C registers.
+	 */
+	for (id = SCU1_RESET_I3C0; id <= SCU1_RESET_I3C15; id++)
+		ast2700_reset_assert(&reset->rcdev, id);
+
+	clks[SCU1_CLKIN] =
+		clk_hw_register_fixed_rate(NULL, "soc1-clkin", NULL, 0, SCU_CLK_25MHZ);
+
+	/* HPLL 1000Mhz */
+	val = readl(clk_base + SCU1_HPLL_PARAM);
+	clks[SCU1_CLK_HPLL] = ast2700_calc_soc1_pll("soc1-hpll", "soc1-clkin", val);
+
+	/* HPLL 800Mhz */
+	val = readl(clk_base + SCU1_APLL_PARAM);
+	clks[SCU1_CLK_APLL] = ast2700_calc_soc1_pll("soc1-apll", "soc1-clkin", val);
+
+	clks[SCU1_CLK_APLL_DIV2] =
+		clk_hw_register_fixed_factor(NULL, "soc1-apll_div2", "soc1-apll", 0, 1, 2);
+
+	clks[SCU1_CLK_APLL_DIV4] =
+		clk_hw_register_fixed_factor(NULL, "soc1-apll_div4", "soc1-apll", 0, 1, 4);
+
+	val = readl(clk_base + SCU1_DPLL_PARAM);
+	clks[SCU1_CLK_DPLL] = ast2700_calc_soc1_pll("dpll", "soc1-clkin", val);
+
+	/* uxclk mux selection */
+	clks[SCU1_CLK_UXCLK] =
+		clk_hw_register_mux(NULL, "uxclk", uxclk_sel, ARRAY_SIZE(uxclk_sel),
+				    0, clk_base + SCU1_CLK_SEL2,
+				    0, 2, 0, &ast2700_clk_lock);
+
+	val = readl(clk_base + SCU1_UXCLK_CTRL);
+	clks[SCU1_CLK_UARTX] = ast2700_calc_uclk("uartxclk", val);
+
+	/* huxclk mux selection */
+	clks[SCU1_CLK_HUXCLK] =
+		clk_hw_register_mux(NULL, "huxclk", uxclk_sel, ARRAY_SIZE(uxclk_sel),
+				    0, clk_base + SCU1_CLK_SEL2,
+				    3, 2, 0, &ast2700_clk_lock);
+
+	val = readl(clk_base + SCU1_HUXCLK_CTRL);
+	clks[SCU1_CLK_HUARTX] = ast2700_calc_huclk("huartxclk", val);
+
+	/* AHB CLK = 200Mhz */
+	clks[SCU1_CLK_AHB] =
+		clk_hw_register_divider_table(NULL, "soc1-ahb", "soc1-hpll",
+					      0, clk_base + SCU1_CLK_SEL2,
+					      20, 3, 0, ast2700_clk_div_table, &ast2700_clk_lock);
+
+	/* APB CLK = 100Mhz */
+	clks[SCU1_CLK_APB] =
+		clk_hw_register_divider_table(NULL, "soc1-apb", "soc1-hpll",
+					      0, clk_base + SCU1_CLK_SEL1,
+					      18, 3, 0, ast2700_clk_div_table2, &ast2700_clk_lock);
+
+	/* RMII */
+	clks[SCU1_CLK_RMII] =
+		clk_hw_register_divider_table(NULL, "rmii", "soc1-hpll",
+					      0, clk_base + SCU1_CLK_SEL1,
+					      21, 3, 0, ast2700_rmii_div_table, &ast2700_clk_lock);
+
+	/* RMII0 50MHz (RCLK) output enable */
+	clks[SCU1_CLK_MAC0RCLK] =
+		clk_hw_register_gate(NULL, "mac0rclk", "rmii", 0,
+				     clk_base + SCU1_MAC12_CLK_DLY, 29,
+				     0, &ast2700_clk_lock);
+
+	/* RMII1 50MHz (RCLK) output enable */
+	clks[SCU1_CLK_MAC1RCLK] =
+		clk_hw_register_gate(NULL, "mac1rclk", "rmii", 0,
+				     clk_base + SCU1_MAC12_CLK_DLY, 30,
+				     0, &ast2700_clk_lock);
+
+	/* RGMII */
+	clks[SCU1_CLK_RGMII] =
+		clk_hw_register_divider_table(NULL, "rgmii", "soc1-hpll",
+					      0, clk_base + SCU1_CLK_SEL1,
+					      25, 3, 0, ast2700_rgmii_div_table, &ast2700_clk_lock);
+
+	/* MAC HCLK */
+	clks[SCU1_CLK_MACHCLK] =
+		clk_hw_register_divider_table(NULL, "machclk", "soc1-hpll",
+					      0, clk_base + SCU1_CLK_SEL1,
+					      29, 3, 0, ast2700_clk_div_table, &ast2700_clk_lock);
+
+	/* MAC0/1 RGMII/RMII Clock Delay */
+	ast2700_soc1_configure_mac01_clk(soc1_node);
+
+	clks[SCU1_CLK_GATE_LCLK0] =
+		ast2700_clk_hw_register_gate(NULL, "lclk0-gate", NULL,
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP,
+					     0, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_LCLK0] =
+		ast2700_clk_hw_register_gate(NULL, "lclk1-gate", NULL,
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP,
+					     1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_ESPI0CLK] =
+		ast2700_clk_hw_register_gate(NULL, "espi0clk-gate", NULL,
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP,
+					     2, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_ESPI1CLK] =
+		ast2700_clk_hw_register_gate(NULL, "espi1clk-gate", NULL,
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP,
+					     3, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_APLL_DIVN] =
+		clk_hw_register_divider_table(NULL, "soc1-apll_divn", "soc1-apll",
+					      0, clk_base + SCU1_CLK_SEL2,
+					      8, 3, 0, ast2700_clk_div_table, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_SDMUX] =
+		clk_hw_register_mux(NULL, "sdclk-mux", sdclk_sel, ARRAY_SIZE(sdclk_sel),
+				    0, clk_base + SCU1_CLK_SEL1,
+				    13, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_SDCLK] =
+		clk_hw_register_divider_table(NULL, "sdclk", "sdclk-mux",
+					      0, clk_base + SCU1_CLK_SEL1,
+					      14, 3, 0, ast2700_clk_div_table, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_SDCLK] =
+		ast2700_clk_hw_register_gate(NULL, "sdclk-gate", "sdclk",
+					     0, clk_base + SCU1_CLK_STOP,
+					     4, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_REFCLK] =
+		ast2700_clk_hw_register_gate(NULL, "soc1-refclk-gate", NULL,
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP,
+					     6, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_LPCHCLK] =
+		ast2700_clk_hw_register_gate(NULL, "lpchclk-gate", NULL,
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP,
+					     7, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_MAC0CLK] =
+		ast2700_clk_hw_register_gate(NULL, "mac0clk-gate", NULL,
+					     0, clk_base + SCU1_CLK_STOP,
+					     8, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_MAC1CLK] =
+		ast2700_clk_hw_register_gate(NULL, "mac1clk-gate", NULL,
+					     0, clk_base + SCU1_CLK_STOP,
+					     9, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_MAC2CLK] =
+		ast2700_clk_hw_register_gate(NULL, "mac2clk-gate", NULL,
+					     0, clk_base + SCU1_CLK_STOP,
+					     10, 0, &ast2700_clk_lock);
+
+	of_property_read_u32(soc1_node, "uart-clk-source", &uart_clk_source);
+	if (uart_clk_source) {
+		val = readl(clk_base + SCU1_CLK_SEL1) & ~GENMASK(12, 0);
+		uart_clk_source &= GENMASK(12, 0);
+		writel(val | uart_clk_source, clk_base + SCU1_CLK_SEL1);
+	}
+
+	//UART0
+	clks[SCU1_CLK_UART0] =
+		clk_hw_register_mux(NULL, "uart0clk", uartclk_sel, ARRAY_SIZE(uartclk_sel),
+				    0, clk_base + SCU1_CLK_SEL1,
+				    0, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_UART0CLK] =
+		ast2700_clk_hw_register_gate(NULL, "uart0clk-gate", "uart0clk",
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP,
+					     11, 0, &ast2700_clk_lock);
+
+	//UART1
+	clks[SCU1_CLK_UART1] =
+		clk_hw_register_mux(NULL, "uart1clk", uartclk_sel, ARRAY_SIZE(uartclk_sel),
+				    0, clk_base + SCU1_CLK_SEL1,
+				    1, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_UART1CLK] =
+		ast2700_clk_hw_register_gate(NULL, "uart1clk-gate", "uart1clk",
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP,
+					     12, 0, &ast2700_clk_lock);
+
+	//UART2
+	clks[SCU1_CLK_UART2] =
+		clk_hw_register_mux(NULL, "uart2clk", uartclk_sel, ARRAY_SIZE(uartclk_sel),
+				    0, clk_base + SCU1_CLK_SEL1,
+				    2, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_UART2CLK] =
+		ast2700_clk_hw_register_gate(NULL, "uart2clk-gate", "uart2clk",
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP,
+					     13, 0, &ast2700_clk_lock);
+
+	//UART3
+	clks[SCU1_CLK_UART3] =
+		clk_hw_register_mux(NULL, "uart3clk", uartclk_sel, ARRAY_SIZE(uartclk_sel),
+				    0, clk_base + SCU1_CLK_SEL1,
+				    3, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_UART3CLK] =
+		ast2700_clk_hw_register_gate(NULL, "uart3clk-gate", "uart3clk",
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP,
+					     14, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C0CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c0clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     16, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C1CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c1clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     17, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C2CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c2clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     18, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C3CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c3clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     19, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C4CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c4clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     20, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C5CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c5clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     21, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C6CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c6clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     22, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C7CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c7clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     23, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C8CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c8clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     24, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C9CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c9clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     25, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C10CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c10clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     26, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C11CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c11clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     27, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C12CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c12clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     28, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C13CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c13clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     29, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C14CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c14clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     30, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C15CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c15clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     31, 0, &ast2700_clk_lock);
+
+	/*clk stop 2 */
+	//UART5
+	clks[SCU1_CLK_UART5] =
+		clk_hw_register_mux(NULL, "uart5clk", uartclk_sel, ARRAY_SIZE(uartclk_sel),
+				    0, clk_base + SCU1_CLK_SEL1,
+				    5, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_UART5CLK] =
+		ast2700_clk_hw_register_gate(NULL, "uart5clk-gate", "uart5clk",
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP2,
+					     0, 0, &ast2700_clk_lock);
+
+	//UART6
+	clks[SCU1_CLK_UART6] =
+		clk_hw_register_mux(NULL, "uart6clk", uartclk_sel, ARRAY_SIZE(uartclk_sel),
+				    0, clk_base + SCU1_CLK_SEL1,
+				    6, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_UART6CLK] =
+		ast2700_clk_hw_register_gate(NULL, "uart6clk-gate", "uart6clk",
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP2,
+					     1, 0, &ast2700_clk_lock);
+
+	//UART7
+	clks[SCU1_CLK_UART7] =
+		clk_hw_register_mux(NULL, "uart7clk", uartclk_sel, ARRAY_SIZE(uartclk_sel),
+				    0, clk_base + SCU1_CLK_SEL1,
+				    7, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_UART7CLK] =
+		ast2700_clk_hw_register_gate(NULL, "uart7clk-gate", "uart7clk",
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP2,
+					     2, 0, &ast2700_clk_lock);
+
+	//UART8
+	clks[SCU1_CLK_UART8] =
+		clk_hw_register_mux(NULL, "uart8clk", uartclk_sel, ARRAY_SIZE(uartclk_sel),
+				    0, clk_base + SCU1_CLK_SEL1,
+				    8, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_UART8CLK] =
+		ast2700_clk_hw_register_gate(NULL, "uart8clk-gate", "uart8clk",
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP2,
+					     3, 0, &ast2700_clk_lock);
+
+	//UART9
+	clks[SCU1_CLK_UART9] =
+		clk_hw_register_mux(NULL, "uart9clk", uartclk_sel, ARRAY_SIZE(uartclk_sel),
+				    0, clk_base + SCU1_CLK_SEL1,
+				    9, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_UART9CLK] =
+		ast2700_clk_hw_register_gate(NULL, "uart9clk-gate", "uart9clk",
+					     0, clk_base + SCU1_CLK_STOP2,
+					     4, 0, &ast2700_clk_lock);
+
+	//UART10
+	clks[SCU1_CLK_UART10] =
+		clk_hw_register_mux(NULL, "uart10clk", uartclk_sel, ARRAY_SIZE(uartclk_sel),
+				    0, clk_base + SCU1_CLK_SEL1,
+				    10, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_UART10CLK] =
+		ast2700_clk_hw_register_gate(NULL, "uart10clk-gate", "uart10clk",
+					     0, clk_base + SCU1_CLK_STOP2,
+					     5, 0, &ast2700_clk_lock);
+
+	//UART11
+	clks[SCU1_CLK_UART11] =
+		clk_hw_register_mux(NULL, "uart11clk", uartclk_sel, ARRAY_SIZE(uartclk_sel),
+				    0, clk_base + SCU1_CLK_SEL1,
+				    11, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_UART11CLK] =
+		ast2700_clk_hw_register_gate(NULL, "uart11clk-gate", "uart11clk",
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP2,
+					     6, 0, &ast2700_clk_lock);
+
+	//uart12: call bmc uart
+	clks[SCU1_CLK_UART12] =
+		clk_hw_register_mux(NULL, "uart12clk", uartclk_sel, ARRAY_SIZE(uartclk_sel),
+				    0, clk_base + SCU1_CLK_SEL1,
+				    12, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_UART12CLK] =
+		ast2700_clk_hw_register_gate(NULL, "uart12clk-gate", "uart12clk",
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP2,
+					     7, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_FSICLK] =
+		ast2700_clk_hw_register_gate(NULL, "fsiclk-gate", NULL,
+					     0, clk_base + SCU1_CLK_STOP2,
+					     8, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_LTPIPHYCLK] =
+		ast2700_clk_hw_register_gate(NULL, "ltpiphyclk-gate", NULL,
+					     0, clk_base + SCU1_CLK_STOP2,
+					     9, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_LTPICLK] =
+		ast2700_clk_hw_register_gate(NULL, "ltpiclk-gate", NULL,
+					     0, clk_base + SCU1_CLK_STOP2,
+					     10, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_VGALCLK] =
+		ast2700_clk_hw_register_gate(NULL, "vgalclk-gate", NULL,
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP2,
+					     11, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_USBUARTCLK] =
+		ast2700_clk_hw_register_gate(NULL, "usbuartclk-gate", NULL,
+					     0, clk_base + SCU1_CLK_STOP2,
+					     12, 0, &ast2700_clk_lock);
+
+	clk_hw_register_fixed_factor(NULL, "canclk", "soc1-apll", 0, 1, 10);
+
+	clks[SCU1_CLK_GATE_CANCLK] =
+		ast2700_clk_hw_register_gate(NULL, "canclk-gate", "canclk",
+					     0, clk_base + SCU1_CLK_STOP2,
+					     13, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_PCICLK] =
+		ast2700_clk_hw_register_gate(NULL, "pciclk-gate", NULL,
+					     0, clk_base + SCU1_CLK_STOP2,
+					     14, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_SLICLK] =
+		ast2700_clk_hw_register_gate(NULL, "sliclk-gate", NULL,
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP2,
+					     15, 0, &ast2700_clk_lock);
+
+	of_clk_add_hw_provider(soc1_node, of_clk_hw_onecell_get, clk_data);
+
+	return 0;
+};
+
+static const char *const pspclk_sel[] = {
+	"soc0-mpll",
+	"soc0-hpll",
+};
+
+static const char *const soc0_uartclk_sel[] = {
+	"soc0-clk24Mhz",
+	"soc0-clk192Mhz",
+};
+
+static const char *const emmcclk_sel[] = {
+	"soc0-mpll_div4",
+	"soc0-hpll_div4",
+};
+
+static int ast2700_soc0_clk_init(struct device_node *soc0_node)
+{
+	struct clk_hw_onecell_data *clk_data;
+	void __iomem *clk_base;
+	struct ast2700_reset *reset;
+	struct clk_hw **clks;
+	int div;
+	u32 val;
+	int ret;
+
+	clk_data = kzalloc(struct_size(clk_data, hws, SOC0_NUM_CLKS), GFP_KERNEL);
+	if (!clk_data)
+		return -ENOMEM;
+
+	clk_data->num = SOC0_NUM_CLKS;
+	clks = clk_data->hws;
+
+	clk_base = of_iomap(soc0_node, 0);
+	if (WARN_ON(IS_ERR(clk_base)))
+		return PTR_ERR(clk_base);
+
+	reset = kzalloc(sizeof(*reset), GFP_KERNEL);
+	if (!reset)
+		return -ENOMEM;
+
+	reset->base = clk_base;
+
+	reset->rcdev.owner = THIS_MODULE;
+	reset->rcdev.nr_resets = SOC0_RESET_NUMS;
+	reset->rcdev.ops = &ast2700_reset_ops;
+	reset->rcdev.of_node = soc0_node;
+
+	ret = reset_controller_register(&reset->rcdev);
+	if (ret) {
+		pr_err("soc0 failed to register reset controller\n");
+		return ret;
+	}
+
+	//refclk
+	clks[SCU0_CLKIN] =
+		clk_hw_register_fixed_rate(NULL, "soc0-clkin", NULL, 0, SCU_CLK_25MHZ);
+
+	clks[SCU0_CLK_24M] =
+		clk_hw_register_fixed_rate(NULL, "soc0-clk24Mhz", NULL, 0, SCU_CLK_24MHZ);
+
+	clks[SCU0_CLK_192M] =
+		clk_hw_register_fixed_rate(NULL, "soc0-clk192Mhz", NULL, 0, SCU_CLK_192MHZ);
+
+	//hpll
+	val = readl(clk_base + SCU0_HWSTRAP1);
+	if ((val & GENMASK(3, 2)) != 0) {
+		switch ((val & GENMASK(3, 2)) >> 2) {
+		case 1:
+			clks[SCU0_CLK_HPLL] =
+				clk_hw_register_fixed_rate(NULL, "soc0-hpll", NULL, 0, 1900000000);
+			break;
+		case 2:
+			clks[SCU0_CLK_HPLL] =
+				clk_hw_register_fixed_rate(NULL, "soc0-hpll", NULL, 0, 1800000000);
+			break;
+		case 3:
+			clks[SCU0_CLK_HPLL] =
+				clk_hw_register_fixed_rate(NULL, "soc0-hpll", NULL, 0, 1700000000);
+			break;
+		}
+	} else {
+		val = readl(clk_base + SCU0_HPLL_PARAM);
+		clks[SCU0_CLK_HPLL] = ast2700_soc0_hw_pll("soc0-hpll", "soc0-clkin", val);
+	}
+	clks[SCU0_CLK_HPLL_DIV2] = clk_hw_register_fixed_factor(NULL, "soc0-hpll_div2", "soc0-hpll", 0, 1, 2);
+	clks[SCU0_CLK_HPLL_DIV4] = clk_hw_register_fixed_factor(NULL, "soc0-hpll_div4", "soc0-hpll", 0, 1, 4);
+
+	//dpll
+	val = readl(clk_base + SCU0_DPLL_PARAM);
+	clks[SCU0_CLK_DPLL] = ast2700_soc0_hw_pll("dpll", "soc0-clkin", val);
+
+	//mpll
+	val = readl(clk_base + SCU0_MPLL_PARAM);
+	clks[SCU0_CLK_MPLL] = ast2700_calc_mpll("soc0-mpll", "soc0-clkin", val);
+	clks[SCU0_CLK_MPLL_DIV2] = clk_hw_register_fixed_factor(NULL, "soc0-mpll_div2", "soc0-mpll", 0, 1, 2);
+	clks[SCU0_CLK_MPLL_DIV4] = clk_hw_register_fixed_factor(NULL, "soc0-mpll_div4", "soc0-mpll", 0, 1, 4);
+	clks[SCU0_CLK_MPLL_DIV8] = clk_hw_register_fixed_factor(NULL, "soc0-mpll_div8", "soc0-mpll", 0, 1, 8);
+
+	val = readl(clk_base + SCU0_D1CLK_PARAM);
+	clks[SCU0_CLK_D1CLK] = ast2700_soc0_hw_pll("d1clk", "soc0-clkin", val);
+
+	val = readl(clk_base + SCU0_D2CLK_PARAM);
+	clks[SCU0_CLK_D2CLK] = ast2700_soc0_hw_pll("d2clk", "soc0-clkin", val);
+
+	val = readl(clk_base + SCU0_CRT1CLK_PARAM);
+	clks[SCU0_CLK_CRT1] = ast2700_soc0_hw_pll("crt1clk", "soc0-clkin", val);
+
+	val = readl(clk_base + SCU0_CRT2CLK_PARAM);
+	clks[SCU0_CLK_CRT2] = ast2700_soc0_hw_pll("crt2clk", "soc0-clkin", val);
+
+	val = readl(clk_base + SCU0_MPHYCLK_PARAM);
+	clks[SCU0_CLK_MPHY] = clk_hw_register_fixed_factor(NULL, "mphyclk", "soc0-hpll", 0, 1, val + 1);
+
+	clks[SCU0_CLK_PSP] =
+		clk_hw_register_mux(NULL, "pspclk", pspclk_sel, ARRAY_SIZE(pspclk_sel),
+				    0, clk_base + SCU0_HWSTRAP1,
+				    4, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_AXI] =
+		clk_hw_register_fixed_factor(NULL, "axi0clk", "pspclk", 0, 1, 2);
+
+	val = readl(clk_base + SCU0_HWSTRAP1);
+	if (val & BIT(7)) {
+		clks[SCU0_CLK_AHB] =
+			clk_hw_register_divider_table(NULL, "soc0-ahb", "soc0-hpll",
+						      0, clk_base + SCU0_HWSTRAP1,
+						      5, 2, 0, ast2700_clk_div_table, &ast2700_clk_lock);
+	} else {
+		clks[SCU0_CLK_AHB] =
+			clk_hw_register_divider_table(NULL, "soc0-ahb", "soc0-mpll",
+						      0, clk_base + SCU0_HWSTRAP1,
+						      5, 2, 0, ast2700_clk_div_table, &ast2700_clk_lock);
+	}
+
+	clks[SCU0_CLK_AXI1] =
+		clk_hw_register_fixed_factor(NULL, "axi1clk", "soc0-ahb", 0, 1, 2);
+
+	clks[SCU0_CLK_APB] =
+		clk_hw_register_divider_table(NULL, "soc0-apb", "axi0clk",
+					      0, clk_base + SCU0_CLK_SEL1,
+					      23, 3, 0, ast2700_clk_div_table2, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_MCLK] =
+		ast2700_clk_hw_register_gate(NULL, "mclk", "soc0-mpll",
+					     CLK_IS_CRITICAL, clk_base + SCU0_CLK_STOP,
+					     0, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_ECLK] =
+		ast2700_clk_hw_register_gate(NULL, "eclk", NULL,
+					     0, clk_base + SCU0_CLK_STOP,
+					     1, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_GCLK] =
+		ast2700_clk_hw_register_gate(NULL, "gclk", NULL,
+					     CLK_IS_CRITICAL, clk_base + SCU0_CLK_STOP,
+					     2, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_VCLK] =
+		ast2700_clk_hw_register_gate(NULL, "vclk", NULL,
+					     0, clk_base + SCU0_CLK_STOP,
+					     3, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_BCLK] =
+		ast2700_clk_hw_register_gate(NULL, "bclk", NULL,
+					     CLK_IS_CRITICAL, clk_base + SCU0_CLK_STOP,
+					     4, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_D1CLK] =
+		ast2700_clk_hw_register_gate(NULL, "d1clk-gate", NULL,
+					     CLK_IS_CRITICAL, clk_base + SCU0_CLK_STOP,
+					     5, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_REFCLK] =
+		ast2700_clk_hw_register_gate(NULL, "soc0-refclk-gate", "soc0-clkin",
+					     CLK_IS_CRITICAL, clk_base + SCU0_CLK_STOP,
+					     6, 0, &ast2700_clk_lock);
+
+	div = (GET_USB_REFCLK_DIV(readl(clk_base + SCU0_CLK_SEL2)) + 1) * 2;
+	clks[SCU0_CLK_U2PHY_REFCLK] = clk_hw_register_fixed_factor(NULL, "xhci_ref_clk", "soc0-mpll_div8", 0, 1, div);
+
+	clks[SCU0_CLK_U2PHY_CLK12M] =
+		clk_hw_register_fixed_rate(NULL, "xhci_suspend_clk", NULL, 0, SCU_CLK_12MHZ);
+
+	clks[SCU0_CLK_GATE_USB0CLK] =
+		ast2700_clk_hw_register_gate(NULL, "usb0clk", NULL,
+					     0, clk_base + SCU0_CLK_STOP,
+					     7, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_USB1CLK] =
+		ast2700_clk_hw_register_gate(NULL, "usb1clk", NULL,
+					     0, clk_base + SCU0_CLK_STOP,
+					     9, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_D2CLK] =
+		ast2700_clk_hw_register_gate(NULL, "d2clk-gate", NULL,
+					     CLK_IS_CRITICAL, clk_base + SCU0_CLK_STOP,
+					     10, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_YCLK] =
+		ast2700_clk_hw_register_gate(NULL, "yclk", NULL,
+					     0, clk_base + SCU0_CLK_STOP,
+					     13, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_USB2CLK] =
+		ast2700_clk_hw_register_gate(NULL, "usb2clk", NULL,
+					     0, clk_base + SCU0_CLK_STOP,
+					     14, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_UART] =
+		clk_hw_register_mux(NULL, "soc0-uartclk", soc0_uartclk_sel, ARRAY_SIZE(soc0_uartclk_sel),
+				    0, clk_base + SCU0_CLK_SEL2,
+				    14, 1, 0, &ast2700_clk_lock);
+
+	if (readl(clk_base + SCU0_CLK_SEL2) & UART_DIV13_EN)
+		div = 13;
+	else
+		div = 1;
+
+	clks[SCU0_CLK_UART4] =
+		clk_hw_register_fixed_factor(NULL, "uart4clk", "soc0-uartclk", 0, 1, div);
+
+	clks[SCU0_CLK_GATE_UART4CLK] =
+		ast2700_clk_hw_register_gate(NULL, "uart4clk-gate", "uart4clk",
+					     CLK_IS_CRITICAL, clk_base + SCU0_CLK_STOP,
+					     15, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_DACCLK] =
+		ast2700_clk_hw_register_gate(NULL, "dacclk", NULL,
+					     CLK_IS_CRITICAL, clk_base + SCU0_CLK_STOP,
+					     17, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_CRT1CLK] =
+		ast2700_clk_hw_register_gate(NULL, "crt1clk-gate", NULL,
+					     0, clk_base + SCU0_CLK_STOP,
+					     20, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_CRT2CLK] =
+		ast2700_clk_hw_register_gate(NULL, "crt2clk-gate", NULL,
+					     0, clk_base + SCU0_CLK_STOP,
+					     21, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_ECCCLK] =
+		ast2700_clk_hw_register_gate(NULL, "eccclk", NULL,
+					     0, clk_base + SCU0_CLK_STOP,
+					     23, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_RSACLK] =
+		ast2700_clk_hw_register_gate(NULL, "rsaclk", NULL,
+					     0, clk_base + SCU0_CLK_STOP,
+					     24, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_RVAS0CLK] =
+		ast2700_clk_hw_register_gate(NULL, "rvasclk", NULL,
+					     0, clk_base + SCU0_CLK_STOP,
+					     25, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_UFSCLK] =
+		ast2700_clk_hw_register_gate(NULL, "ufsclk", NULL,
+					     0, clk_base + SCU0_CLK_STOP,
+					     26, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_EMMCMUX] =
+		clk_hw_register_mux(NULL, "emmcsrc-mux", emmcclk_sel, ARRAY_SIZE(emmcclk_sel),
+				    0, clk_base + SCU0_CLK_SEL1,
+				    11, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_EMMC] =
+		clk_hw_register_divider_table(NULL, "emmcclk", "emmcsrc-mux",
+					      0, clk_base + SCU0_CLK_SEL1,
+					      12, 3, 0, ast2700_clk_div_table2,
+					      &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_EMMCCLK] =
+		ast2700_clk_hw_register_gate(NULL, "emmcclk-gate", "emmcclk",
+					     0, clk_base + SCU0_CLK_STOP,
+					     27, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_RVAS1CLK] =
+		ast2700_clk_hw_register_gate(NULL, "rvas2clk", NULL,
+					     0, clk_base + SCU0_CLK_STOP,
+					     28, 0, &ast2700_clk_lock);
+
+	of_clk_add_hw_provider(soc0_node, of_clk_hw_onecell_get, clk_data);
+
+	return 0;
+};
+
+CLK_OF_DECLARE_DRIVER(ast2700_soc0, "aspeed,ast2700-scu0", ast2700_soc0_clk_init);
+CLK_OF_DECLARE_DRIVER(ast2700_soc1, "aspeed,ast2700-scu1", ast2700_soc1_clk_init);