@@ -93,7 +93,7 @@ reg_emac_3v3: emac-3v3 {
regulator-max-microvolt = <3300000>;
startup-delay-us = <20000>;
enable-active-high;
- gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>;
};
sound {
@@ -128,7 +128,7 @@ ®_usb1_vbus {
};
®_usb2_vbus {
- gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -82,7 +82,7 @@ reg_motor: reg-motor {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
enable-active-high;
- gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+ gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
};
};
@@ -67,7 +67,7 @@ reg_emac_3v3: emac-3v3 {
regulator-max-microvolt = <3300000>;
startup-delay-us = <20000>;
enable-active-high;
- gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>;
};
};
@@ -123,7 +123,7 @@ ®_usb1_vbus {
};
®_usb2_vbus {
- gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -91,7 +91,7 @@ ®_usb0_vbus {
};
®_usb2_vbus {
- gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+ gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
status = "okay";
};
@@ -77,7 +77,7 @@ reg_emac_3v3: emac-3v3 {
regulator-max-microvolt = <3300000>;
startup-delay-us = <20000>;
enable-active-high;
- gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
+ gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
};
};
@@ -119,7 +119,7 @@ ®_usb1_vbus {
};
®_usb2_vbus {
- gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+ gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
status = "okay";
};
@@ -188,7 +188,7 @@ led_pins_olinuxinolime: led-pin {
};
®_ahci_5v {
- gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -56,7 +56,7 @@ / {
};
®_usb2_vbus {
- gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -48,7 +48,7 @@ panel_input: endpoint {
reg_lcd_power: reg-lcd-power {
compatible = "regulator-fixed";
regulator-name = "reg-lcd-power";
- gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+ gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
enable-active-high;
};
@@ -110,12 +110,12 @@ led_pins_t003: led-pin {
};
®_usb0_vbus {
- gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+ gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
status = "okay";
};
®_usb1_vbus {
- gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+ gpios = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
status = "okay";
};
@@ -75,7 +75,7 @@ reg_vmmc1: vmmc1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
- gpio = <&pio 1 18 GPIO_ACTIVE_HIGH>; /* PB18 */
+ gpios = <&pio 1 18 GPIO_ACTIVE_HIGH>; /* PB18 */
};
};
@@ -127,7 +127,7 @@ led_pins_t004: led-pin {
};
®_usb1_vbus {
- gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+ gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
status = "okay";
};
@@ -106,7 +106,7 @@ &otg_sram {
};
®_usb1_vbus {
- gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+ gpios = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
status = "okay";
};
@@ -221,12 +221,12 @@ led_pins_olinuxino: led-pin {
};
®_usb0_vbus {
- gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+ gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
status = "okay";
};
®_usb1_vbus {
- gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 1 10 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -102,7 +102,7 @@ led_pins_r7: led-pin {
};
®_usb1_vbus {
- gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -76,7 +76,7 @@ reg_emac_3v3: emac-3v3 {
regulator-max-microvolt = <3300000>;
startup-delay-us = <20000>;
enable-active-high;
- gpio = <&pio 0 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 0 2 GPIO_ACTIVE_HIGH>;
};
};
@@ -174,7 +174,7 @@ ®_ldo4 {
};
®_usb1_vbus {
- gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -166,7 +166,7 @@ ®_ldo3 {
};
®_usb0_vbus {
- gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
status = "okay";
};
@@ -158,7 +158,7 @@ ®_ldo3 {
};
®_usb0_vbus {
- gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
status = "okay";
};
@@ -190,7 +190,7 @@ ®_ldo4 {
};
®_usb0_vbus {
- gpio = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
+ gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
status = "okay";
};
@@ -112,12 +112,12 @@ led_pins_olinuxinom: led-pin {
};
®_usb0_vbus {
- gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>;
status = "okay";
};
®_usb1_vbus {
- gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -206,11 +206,11 @@ led_pins_olinuxino: led-pin {
®_usb0_vbus {
status = "okay";
- gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
};
®_usb1_vbus {
- gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -56,7 +56,7 @@ reg_3v3_mmc0: regulator-mmc0 {
regulator-name = "vdd-mmc0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */
+ gpios = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */
vin-supply = <®_vcc3v3>;
};
};
@@ -182,11 +182,11 @@ ®_ldo2 {
®_usb0_vbus {
status = "okay";
- gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
};
®_usb1_vbus {
- gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+ gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
status = "okay";
};
@@ -67,7 +67,7 @@ reg_1v8: regulator-1v8 {
regulator-name = "vdd-1v8-nor-ctp";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&pio 2 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 2 15 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -76,7 +76,7 @@ reg_1v8_nor: regulator-nor {
regulator-name = "vdd-nor";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&pio 2 14 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 2 14 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <®_1v8>;
regulator-always-on;
@@ -87,7 +87,7 @@ reg_1v8_ctp: regulator-ctp {
regulator-name = "vdd-ctp";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&pio 2 13 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <®_1v8>;
};
@@ -97,7 +97,7 @@ reg_3v3_mmc0: regulator-mmc0 {
regulator-name = "vdd-mmc0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */
+ gpios = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */
vin-supply = <®_vcc3v3>;
};
};
@@ -93,7 +93,7 @@ mmccard: mmccard@0 {
};
®_usb0_vbus {
- gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+ gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
};
&touchscreen {
@@ -280,7 +280,7 @@ ®_ldo2 {
};
®_usb1_vbus {
- gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -226,7 +226,7 @@ ®_ldo5 {
®_usb0_vbus {
vin-supply = <®_vcc5v0>;
- gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+ gpios = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
status = "okay";
};
@@ -165,7 +165,7 @@ ®_ldo3 {
};
®_usb0_vbus {
- gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
status = "okay";
};
@@ -66,7 +66,7 @@ &ehci0 {
};
®_usb1_vbus {
- gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 7 27 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -114,7 +114,7 @@ &mmc0 {
};
®_usb2_vbus {
- gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -116,7 +116,7 @@ reg_vga_3v3: vga-3v3-regulator {
regulator-max-microvolt = <3300000>;
regulator-boot-on;
enable-active-high;
- gpio = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
+ gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
};
wifi_pwrseq: pwrseq {
@@ -297,7 +297,7 @@ ®_drivevbus {
};
®_usb1_vbus {
- gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+ gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
status = "okay";
};
@@ -152,7 +152,7 @@ &mmc0 {
};
®_usb1_vbus {
- gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 2 27 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -195,7 +195,7 @@ ®_dldo4 {
};
®_usb1_vbus {
- gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 2 27 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -195,7 +195,7 @@ ®_dldo4 {
};
®_usb1_vbus {
- gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 2 27 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -98,7 +98,7 @@ reg_gmac_3v3: gmac-3v3 {
regulator-max-microvolt = <3300000>;
startup-delay-us = <100000>;
enable-active-high;
- gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 7 23 GPIO_ACTIVE_HIGH>;
};
};
@@ -90,7 +90,7 @@ reg_gmac_3v3: gmac-3v3 {
regulator-max-microvolt = <3300000>;
startup-delay-us = <100000>;
enable-active-high;
- gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 7 23 GPIO_ACTIVE_HIGH>;
};
};
@@ -86,7 +86,7 @@ reg_gmac_3v3: gmac-3v3 {
regulator-max-microvolt = <3300000>;
startup-delay-us = <100000>;
enable-active-high;
- gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 7 23 GPIO_ACTIVE_HIGH>;
};
};
@@ -177,12 +177,12 @@ &ohci1 {
};
®_usb1_vbus {
- gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
+ gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
status = "okay";
};
®_usb2_vbus {
- gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
status = "okay";
};
@@ -244,7 +244,7 @@ &pwm {
};
®_ahci_5v {
- gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -284,7 +284,7 @@ ®_ldo2 {
};
®_usb0_vbus {
- gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 7 17 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -71,7 +71,7 @@ reg_mmc3_vdd: regulator-mmc3-vdd {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
enable-active-high;
- gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+ gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
};
reg_gmac_vdd: regulator-gmac-vdd {
@@ -80,7 +80,7 @@ reg_gmac_vdd: regulator-gmac-vdd {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
enable-active-high;
- gpio = <&pio 7 16 GPIO_ACTIVE_HIGH>; /* PH16 */
+ gpios = <&pio 7 16 GPIO_ACTIVE_HIGH>; /* PH16 */
};
};
@@ -176,12 +176,12 @@ &pwm {
};
®_ahci_5v {
- gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+ gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
status = "okay";
};
®_usb1_vbus {
- gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+ gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
status = "okay";
};
@@ -79,7 +79,7 @@ reg_vmmc3: vmmc3 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
- gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
};
reg_vmmc3_io: vmmc3-io {
@@ -90,7 +90,7 @@ reg_vmmc3_io: vmmc3-io {
/* This controls VCC-PI, must be always on! */
regulator-always-on;
enable-active-high;
- gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>;
};
reg_gmac_3v3: gmac-3v3 {
@@ -100,7 +100,7 @@ reg_gmac_3v3: gmac-3v3 {
regulator-max-microvolt = <3300000>;
startup-delay-us = <50000>;
enable-active-high;
- gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
};
};
@@ -88,7 +88,7 @@ reg_gmac_3v3: gmac-3v3 {
regulator-max-microvolt = <3300000>;
startup-delay-us = <100000>;
enable-active-high;
- gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+ gpios = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
};
};
@@ -238,7 +238,7 @@ &battery_power_supply {
};
®_ahci_5v {
- gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+ gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
status = "okay";
};
@@ -272,7 +272,7 @@ ®_usb0_vbus {
};
®_usb2_vbus {
- gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+ gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
status = "okay";
};
@@ -239,7 +239,7 @@ led_pins_olimex_som_evb: led-pins {
};
®_ahci_5v {
- gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -212,7 +212,7 @@ &battery_power_supply {
};
®_ahci_5v {
- gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -251,7 +251,7 @@ ®_ldo4 {
};
®_usb0_vbus {
- gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 2 17 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -179,7 +179,7 @@ led_pins_olinuxinolime: led-pins {
};
®_ahci_5v {
- gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -190,7 +190,7 @@ led_pins_olinuxinolime: led-pins {
};
®_ahci_5v {
- gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -247,7 +247,7 @@ ®_ldo4 {
};
®_usb0_vbus {
- gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 2 17 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -93,7 +93,7 @@ reg_gmac_3v3: gmac-3v3 {
regulator-max-microvolt = <3300000>;
startup-delay-us = <100000>;
enable-active-high;
- gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+ gpios = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
};
};
@@ -208,12 +208,12 @@ ®_usb0_vbus {
};
®_usb1_vbus {
- gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
+ gpios = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
status = "okay";
};
®_usb2_vbus {
- gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+ gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
status = "okay";
};
@@ -77,7 +77,7 @@ reg_gmac_3v3: gmac-3v3 {
regulator-max-microvolt = <3300000>;
startup-delay-us = <100000>;
enable-active-high;
- gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+ gpios = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
};
};
@@ -167,12 +167,12 @@ ®_usb0_vbus {
};
®_usb1_vbus {
- gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
+ gpios = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
status = "okay";
};
®_usb2_vbus {
- gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+ gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
status = "okay";
};
@@ -169,7 +169,7 @@ &otg_sram {
};
®_ahci_5v {
- gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+ gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
status = "okay";
};
@@ -202,7 +202,7 @@ ®_ldo2 {
/* A single regulator (U24) powers both USB host ports. */
®_usb1_vbus {
- gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
+ gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
status = "okay";
};
@@ -171,7 +171,7 @@ &otg_sram {
};
®_ahci_5v {
- gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -65,7 +65,7 @@ reg_usb0_vbus: reg-usb0-vbus {
regulator-max-microvolt = <5000000>;
regulator-boot-on;
enable-active-high;
- gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+ gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
};
reg_usb1_vbus: reg-usb1-vbus {
@@ -75,7 +75,7 @@ reg_usb1_vbus: reg-usb1-vbus {
regulator-max-microvolt = <5000000>;
regulator-boot-on;
enable-active-high;
- gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
};
};
@@ -92,7 +92,7 @@ reg_usb1_vbus: reg-usb1-vbus {
regulator-max-microvolt = <5000000>;
regulator-boot-on;
enable-active-high;
- gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+ gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
};
wifi_pwrseq: pwrseq {
@@ -118,7 +118,7 @@ regulator-sata-disk-pwr {
regulator-max-microvolt = <5000000>;
regulator-always-on;
enable-active-high;
- gpio = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */
+ gpios = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */
};
};
@@ -113,7 +113,7 @@ reg_usb1_vbus: reg-usb1-vbus {
regulator-max-microvolt = <5000000>;
regulator-boot-on;
enable-active-high;
- gpio = <&pio 3 29 GPIO_ACTIVE_HIGH>; /* PD29 */
+ gpios = <&pio 3 29 GPIO_ACTIVE_HIGH>; /* PD29 */
};
reg_usb2_vbus: reg-usb2-vbus {
@@ -123,7 +123,7 @@ reg_usb2_vbus: reg-usb2-vbus {
regulator-max-microvolt = <5000000>;
regulator-boot-on;
enable-active-high;
- gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
};
sound {
@@ -118,7 +118,7 @@ reg_vmain: reg-vmain {
regulator-name = "vmain";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <®_vbat>;
};
@@ -82,7 +82,7 @@ reg_vcc_dram: vcc-dram {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+ gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
vin-supply = <®_vcc5v0>;
};
@@ -94,7 +94,7 @@ reg_vcc1v2: vcc1v2 {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+ gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
vin-supply = <®_vcc5v0>;
};
@@ -61,7 +61,7 @@ reg_vcc_usb_eth: reg-vcc-usb-ethernet {
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-usb-ethernet";
enable-active-high;
- gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
};
aliases {
@@ -86,7 +86,7 @@ reg_vcc_wifi: reg-vcc-wifi {
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
enable-active-high;
- gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
};
reg_vdd_cpux: vdd-cpux-regulator {
@@ -209,7 +209,7 @@ &ohci1 {
};
®_usb0_vbus {
- gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+ gpios = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
status = "okay";
};
@@ -71,7 +71,7 @@ reg_vcc_dram: vcc-dram {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+ gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
vin-supply = <®_vcc5v0>;
};
@@ -83,7 +83,7 @@ reg_vdd_sys: vdd-sys {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+ gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
vin-supply = <®_vcc5v0>;
};
@@ -133,7 +133,7 @@ &ohci0 {
};
®_usb0_vbus {
- gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+ gpios = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
status = "okay";
};
@@ -59,7 +59,7 @@ reg_gmac_3v3: gmac-3v3 {
regulator-max-microvolt = <3300000>;
startup-delay-us = <100000>;
enable-active-high;
- gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 3 6 GPIO_ACTIVE_HIGH>;
};
wifi_pwrseq: pwrseq {
@@ -25,7 +25,7 @@ reg_gmac_3v3: gmac-3v3 {
regulator-max-microvolt = <3300000>;
startup-delay-us = <100000>;
enable-active-high;
- gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+ gpios = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
};
reg_vdd_cpux: gpio-regulator {
@@ -129,7 +129,7 @@ &ohci2 {
};
®_usb0_vbus {
- gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+ gpios = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
status = "okay";
};
@@ -175,7 +175,7 @@ rtl8189: wifi@1 {
};
®_usb1_vbus {
- gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -162,7 +162,7 @@ &ohci1 {
};
®_usb0_vbus {
- gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+ gpios = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
status = "okay";
};
@@ -201,7 +201,7 @@ reg_vdd_cpux: regulator@65 {
};
®_usb0_vbus {
- gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+ gpios = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
status = "okay";
};
@@ -58,7 +58,7 @@ reg_gmac_3v3: gmac-3v3 {
regulator-max-microvolt = <3300000>;
startup-delay-us = <100000>;
enable-active-high;
- gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 3 6 GPIO_ACTIVE_HIGH>;
};
reg_usb3_vbus: usb3-vbus {
@@ -68,7 +68,7 @@ reg_usb3_vbus: usb3-vbus {
regulator-max-microvolt = <5000000>;
regulator-boot-on;
enable-active-high;
- gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
};
};
@@ -58,7 +58,7 @@ reg_gmac_3v3: gmac-3v3 {
regulator-max-microvolt = <3300000>;
startup-delay-us = <100000>;
enable-active-high;
- gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+ gpios = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
};
};
@@ -57,7 +57,7 @@ reg_gmac_3v3: gmac-3v3 {
regulator-max-microvolt = <3300000>;
startup-delay-us = <100000>;
enable-active-high;
- gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+ gpios = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
};
};
@@ -281,7 +281,7 @@ ®_eldo3 {
};
®_usb1_vbus {
- gpio = <&pio 3 12 GPIO_ACTIVE_HIGH>; /* PD12 */
+ gpios = <&pio 3 12 GPIO_ACTIVE_HIGH>; /* PD12 */
status = "okay";
};
@@ -96,7 +96,7 @@ reg_vcc5v0: vcc5v0 {
regulator-name = "vcc5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+ gpios = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
enable-active-high;
};
@@ -46,7 +46,7 @@ reg_vcc_wifi: vcc-wifi {
regulator-name = "vcc-wifi";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&pio 1 2 GPIO_ACTIVE_LOW>; /* PB2 WIFI-EN */
+ gpios = <&pio 1 2 GPIO_ACTIVE_LOW>; /* PB2 WIFI-EN */
vin-supply = <®_dcdc3>;
startup-delay-us = <200000>;
};
@@ -78,7 +78,7 @@ reg_vcc5v0: vcc5v0 {
regulator-name = "vcc5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+ gpios = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
enable-active-high;
};
};
@@ -90,7 +90,7 @@ reg_vcc5v0: vcc5v0 {
regulator-name = "vcc5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+ gpios = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
enable-active-high;
};
@@ -86,7 +86,7 @@ reg_usb1_vbus: usb1-vbus {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
};
reg_usb3_vbus: usb3-vbus {
@@ -95,7 +95,7 @@ reg_usb3_vbus: usb3-vbus {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
};
wifi_pwrseq: wifi-pwrseq {
@@ -95,7 +95,7 @@ reg_gmac_3v3: gmac-3v3 {
regulator-max-microvolt = <3300000>;
startup-delay-us = <100000>;
enable-active-high;
- gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 3 6 GPIO_ACTIVE_HIGH>;
};
wifi_pwrseq: pwrseq {
@@ -202,7 +202,7 @@ &ohci2 {
};
®_usb0_vbus {
- gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */
+ gpios = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */
status = "okay";
};
@@ -52,7 +52,7 @@ reg_ahci_5v: ahci-5v {
regulator-max-microvolt = <5000000>;
regulator-boot-on;
enable-active-high;
- gpio = <&pio 1 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 1 8 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
@@ -62,7 +62,7 @@ reg_usb0_vbus: usb0-vbus {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&pio 1 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 1 9 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
@@ -73,7 +73,7 @@ reg_usb1_vbus: usb1-vbus {
regulator-max-microvolt = <5000000>;
regulator-boot-on;
enable-active-high;
- gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
@@ -84,7 +84,7 @@ reg_usb2_vbus: usb2-vbus {
regulator-max-microvolt = <5000000>;
regulator-boot-on;
enable-active-high;
- gpio = <&pio 7 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 7 3 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
@@ -32,7 +32,7 @@ &cpu0 {
};
®_usb0_vbus {
- gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+ gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
status = "okay";
};
@@ -61,7 +61,7 @@ reg_vcc1v2: vcc1v2 {
regulator-always-on;
regulator-boot-on;
vin-supply = <®_vcc5v0>;
- gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+ gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
enable-active-high;
};
@@ -89,7 +89,7 @@ reg_vcc_dram: vcc-dram {
regulator-always-on;
regulator-boot-on;
vin-supply = <®_vcc5v0>;
- gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+ gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
enable-active-high;
};
@@ -101,7 +101,7 @@ reg_vcc_io: vcc-io {
regulator-always-on;
regulator-boot-on;
vin-supply = <®_vcc3v3>;
- gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+ gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
};
reg_vdd_cpux: vdd-cpux {
@@ -112,7 +112,7 @@ reg_vdd_cpux: vdd-cpux {
regulator-always-on;
regulator-boot-on;
vin-supply = <®_vcc5v0>;
- gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+ gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
enable-active-high;
};
};
@@ -62,7 +62,7 @@ reg_vcc_dram: vcc-dram {
regulator-always-on;
regulator-boot-on;
vin-supply = <®_vcc5v0>;
- gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+ gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
enable-active-high;
};
@@ -73,7 +73,7 @@ reg_vcc_io: vcc-io {
regulator-always-on;
regulator-boot-on;
vin-supply = <®_vcc3v3>;
- gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+ gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
};
reg_vcc_usbwifi: vcc-usbwifi {
@@ -82,7 +82,7 @@ reg_vcc_usbwifi: vcc-usbwifi {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <®_vcc5v0>;
- gpio = <&pio 6 4 GPIO_ACTIVE_HIGH>; /* PG4 */
+ gpios = <&pio 6 4 GPIO_ACTIVE_HIGH>; /* PG4 */
enable-active-high;
};
@@ -94,7 +94,7 @@ reg_vdd_cpux: vdd-cpux {
regulator-always-on;
regulator-boot-on;
vin-supply = <®_vcc5v0>;
- gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+ gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
enable-active-high;
};
};
@@ -136,7 +136,7 @@ usb_vbus: regulator-usb-vbus {
/*
* signal name from the schematics: USB_PWR_EN
*/
- gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -155,7 +155,7 @@ vcc_5v: regulator-vcc5v {
/*
* signal name from the schematics: 3V3_5V_EN
*/
- gpio = <&gpio GPIODV_29 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio GPIODV_29 GPIO_ACTIVE_LOW>;
regulator-boot-on;
regulator-always-on;
@@ -62,7 +62,7 @@ tflash_vdd: regulator-tflash_vdd {
vin-supply = <&vcc_3v3>;
- gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -232,7 +232,7 @@ vbus_sled1: vbus_sled1 {
regulator-name = "vbus_sled1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&sled1_ioexp 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&sled1_ioexp 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -241,7 +241,7 @@ vbus_sled2: vbus_sled2 {
regulator-name = "vbus_sled2";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&sled2_ioexp 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&sled2_ioexp 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -250,7 +250,7 @@ vbus_sled3: vbus_sled3 {
regulator-name = "vbus_sled3";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&sled3_ioexp 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&sled3_ioexp 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -259,7 +259,7 @@ vbus_sled4: vbus_sled4 {
regulator-name = "vbus_sled4";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&sled4_ioexp 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&sled4_ioexp 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -268,7 +268,7 @@ vbus_sled5: vbus_sled5 {
regulator-name = "vbus_sled5";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&sled5_ioexp 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&sled5_ioexp 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -277,7 +277,7 @@ vbus_sled6: vbus_sled6 {
regulator-name = "vbus_sled6";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&sled6_ioexp 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&sled6_ioexp 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -20,7 +20,7 @@ cam1_reg: regulator-cam1 {
compatible = "regulator-fixed";
regulator-name = "cam1-reg";
enable-active-high;
- gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&expgpio 5 GPIO_ACTIVE_HIGH>;
};
sd_io_1v8_reg: regulator-sd-io-1v8 {
@@ -44,7 +44,7 @@ sd_vcc_reg: regulator-sd-vcc {
regulator-max-microvolt = <3300000>;
regulator-boot-on;
enable-active-high;
- gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&expgpio 6 GPIO_ACTIVE_HIGH>;
};
};
@@ -33,7 +33,7 @@ sd_vcc_reg: regulator-sd-vcc {
regulator-max-microvolt = <3300000>;
regulator-boot-on;
enable-active-high;
- gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&expgpio 6 GPIO_ACTIVE_HIGH>;
};
};
@@ -59,7 +59,7 @@ lcddc: lcddc {
regulator-name = "BACKLIGHT ENABLE";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&portd 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&portd 1 GPIO_ACTIVE_HIGH>;
};
blen: blen {
@@ -67,7 +67,7 @@ blen: blen {
regulator-name = "BACKLIGHT ENABLE";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&portd 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&portd 3 GPIO_ACTIVE_HIGH>;
};
};
@@ -51,7 +51,7 @@ vdisp: regulator {
regulator-min-microvolt = <3600000>;
regulator-max-microvolt = <3600000>;
/* Collides with LCD E */
- gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -40,7 +40,7 @@ reg_va_5v0: regulator-va-5v0 {
regulator-name = "va-5v0-fixed-supply";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 124 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 124 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -21,7 +21,7 @@ lcd_supply: regulator-va-tft {
regulator-name = "va-tft-fixed-supply";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -70,7 +70,7 @@ regulator-usb-nrst {
regulator-name = "usb_nrst";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&portb 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&portb 5 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
regulator-always-on;
@@ -115,7 +115,7 @@ usb_power: regulator-1 {
enable-active-high;
regulator-boot-on;
regulator-always-on;
- gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
};
sata_r_power: regulator-2 {
@@ -129,7 +129,7 @@ sata_r_power: regulator-2 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
};
sata_l_power: regulator-3 {
@@ -143,7 +143,7 @@ sata_l_power: regulator-3 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
};
};
@@ -54,7 +54,7 @@ regulator-3 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&pca9554 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&pca9554 6 GPIO_ACTIVE_HIGH>;
};
regulator-4 {
@@ -65,7 +65,7 @@ regulator-4 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&pca9554 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&pca9554 7 GPIO_ACTIVE_HIGH>;
};
gpio-leds {
@@ -78,7 +78,7 @@ regulator-1 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
};
regulator-2 {
@@ -89,7 +89,7 @@ regulator-2 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
};
gpio-fan {
@@ -40,6 +40,6 @@ regulator-2 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
};
};
@@ -60,7 +60,7 @@ regulator-0 {
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
};
regulator-1 {
@@ -71,7 +71,7 @@ regulator-1 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
};
gpio-keys {
@@ -151,7 +151,7 @@ sata1_regulator: sata1-regulator-1 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&sata1_pwr_pin>;
pinctrl-names = "default";
};
@@ -165,7 +165,7 @@ sata2_regulator: sata2-regulator-2 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&sata2_pwr_pin>;
pinctrl-names = "default";
};
@@ -104,7 +104,7 @@ reg_5p0v: regulator-5p0v {
v_usb3_con: regulator-v-usb3-con {
compatible = "regulator-fixed";
- gpio = <&gpio0 22 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&cf_gtr_usb3_con_vbus>;
regulator-max-microvolt = <5000000>;
@@ -183,7 +183,7 @@ reg_xhci0_vbus: xhci0-vbus {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
};
@@ -168,7 +168,7 @@ &sdhci {
};
&usb3_1_vbus {
- gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
&usb3_1_vbus_pins {
@@ -45,7 +45,7 @@ usb3_1_vbus: usb3_1-vbus {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
};
gpio_keys: gpio-keys {
@@ -177,7 +177,7 @@ reg_usb3_0_vbus: usb3-vbus0 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
};
reg_usb3_1_vbus: usb3-vbus1 {
@@ -188,7 +188,7 @@ reg_usb3_1_vbus: usb3-vbus1 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
};
reg_sata0: pwr-sata0 {
@@ -198,7 +198,7 @@ reg_sata0: pwr-sata0 {
regulator-max-microvolt = <12000000>;
enable-active-high;
regulator-boot-on;
- gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
reg_5v_sata0: v5-sata0 {
@@ -260,7 +260,7 @@ reg_usb3_vbus: usb3-vbus {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&expander1 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&expander1 15 GPIO_ACTIVE_HIGH>;
};
reg_usb2_0_vbus: v5-vbus0 {
@@ -270,7 +270,7 @@ reg_usb2_0_vbus: v5-vbus0 {
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
- gpio = <&expander1 14 GPIO_ACTIVE_HIGH>;
+ gpios = <&expander1 14 GPIO_ACTIVE_HIGH>;
};
reg_usb2_1_vbus: v5-vbus1 {
@@ -279,7 +279,7 @@ reg_usb2_1_vbus: v5-vbus1 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
+ gpios = <&expander0 4 GPIO_ACTIVE_HIGH>;
};
reg_sata0: pwr-sata0 {
@@ -289,7 +289,7 @@ reg_sata0: pwr-sata0 {
regulator-max-microvolt = <12000000>;
enable-active-high;
regulator-boot-on;
- gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&expander0 2 GPIO_ACTIVE_HIGH>;
};
reg_5v_sata0: v5-sata0 {
@@ -315,7 +315,7 @@ reg_sata1: pwr-sata1 {
regulator-max-microvolt = <12000000>;
enable-active-high;
regulator-boot-on;
- gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&expander0 3 GPIO_ACTIVE_HIGH>;
};
reg_5v_sata1: v5-sata1 {
@@ -339,7 +339,7 @@ reg_sata2: pwr-sata2 {
regulator-name = "pwr_en_sata2";
enable-active-high;
regulator-boot-on;
- gpio = <&expander0 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&expander0 11 GPIO_ACTIVE_HIGH>;
};
reg_5v_sata2: v5-sata2 {
@@ -363,7 +363,7 @@ reg_sata3: pwr-sata3 {
regulator-name = "pwr_en_sata3";
enable-active-high;
regulator-boot-on;
- gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&expander0 12 GPIO_ACTIVE_HIGH>;
};
reg_5v_sata3: v5-sata3 {
@@ -64,7 +64,7 @@ reg_5p0v_usb: regulator-5v-usb {
regulator-boot-on;
regulator-always-on;
enable-active-high;
- gpio = <&expander0 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&expander0 6 GPIO_ACTIVE_HIGH>;
vin-supply = <®_12v>;
};
@@ -118,7 +118,7 @@ sata1_regulator: sata1-regulator-1 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&sata1_pwr_pin>;
pinctrl-names = "default";
};
@@ -132,7 +132,7 @@ sata2_regulator: sata2-regulator-2 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&sata2_pwr_pin>;
pinctrl-names = "default";
};
@@ -146,7 +146,7 @@ sata3_regulator: sata3-regulator-3 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&sata3_pwr_pin>;
pinctrl-names = "default";
};
@@ -160,7 +160,7 @@ sata4_regulator: sata4-regulator-4 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&sata4_pwr_pin>;
pinctrl-names = "default";
};
@@ -113,7 +113,7 @@ wifi_power: regulator-1 {
regulator-name = "WiFi Power";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
};
};
@@ -36,7 +36,7 @@ usb_power: regulator-1 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 1 0>;
+ gpios = <&gpio0 1 0>;
pinctrl-0 = <&pmx_gpio_1>;
pinctrl-names = "default";
};
@@ -45,7 +45,7 @@ usb_power: regulator-1 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 8 0>;
+ gpios = <&gpio0 8 0>;
pinctrl-0 = <&pmx_gpio_8>;
pinctrl-names = "default";
};
@@ -81,7 +81,7 @@ usb0_power: regulator-2 {
regulator-name = "USB Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
};
mmc_power: regulator-3 {
@@ -89,7 +89,7 @@ mmc_power: regulator-3 {
regulator-name = "MMC Power";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio_ext 13 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio_ext 13 GPIO_ACTIVE_HIGH>;
};
};
@@ -74,7 +74,7 @@ sata0_power: regulator@1 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 24 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
};
sata1_power: regulator@2 {
@@ -86,7 +86,7 @@ sata1_power: regulator@2 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 28 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
};
};
};
@@ -165,7 +165,7 @@ sata0_power: regulator@1 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio1 7 0>;
+ gpios = <&gpio1 7 0>;
};
sata1_power: regulator@2 {
compatible = "regulator-fixed";
@@ -176,7 +176,7 @@ sata1_power: regulator@2 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio1 8 0>;
+ gpios = <&gpio1 8 0>;
};
};
};
@@ -68,7 +68,7 @@ usb_power: regulator@1 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 29 0>;
+ gpios = <&gpio0 29 0>;
};
};
};
@@ -143,7 +143,7 @@ usb_power: regulator@1 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
};
};
@@ -154,7 +154,7 @@ usb2_pwr {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 3 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
regulator-always-on;
};
@@ -164,7 +164,7 @@ usb1_pwr {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
regulator-always-on;
};
@@ -174,7 +174,7 @@ mpcie_pwr {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
@@ -185,7 +185,7 @@ express_card_pwr {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
@@ -93,7 +93,7 @@ usb_power_back1: regulator@1 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
usb_power_back2: regulator@2 {
@@ -105,7 +105,7 @@ usb_power_back2: regulator@2 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
};
usb_power_front: regulator@3 {
@@ -117,7 +117,7 @@ usb_power_front: regulator@3 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
};
};
};
@@ -129,11 +129,11 @@ gpio_fan {
regulators {
usb_power: regulator@1 {
- gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
hdd_power0: regulator@2 {
- gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
};
};
};
@@ -110,11 +110,11 @@ regulators {
pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
usb_power: regulator@1 {
- gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
};
hdd_power0: regulator@2 {
- gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
};
hdd_power1: regulator@3 {
@@ -126,7 +126,7 @@ hdd_power1: regulator@3 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
};
};
@@ -92,7 +92,7 @@ hdd_power1: regulator@3 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
};
};
};
@@ -69,7 +69,7 @@ hdd_power1: regulator@3 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
};
};
};
@@ -198,7 +198,7 @@ usb_power: regulator@1 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 11 0>;
+ gpios = <&gpio0 11 0>;
};
hdd_power: regulator@2 {
compatible = "regulator-fixed";
@@ -209,7 +209,7 @@ hdd_power: regulator@2 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 10 0>;
+ gpios = <&gpio0 10 0>;
};
};
};
@@ -65,7 +65,7 @@ regulator@2 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
};
clocks {
g762_clk: g762-oscillator {
@@ -42,7 +42,7 @@ regulator@2 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
};
clocks {
@@ -38,7 +38,7 @@ regulator@2 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
};
regulator@3 {
@@ -50,7 +50,7 @@ regulator@3 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
};
regulator@4 {
@@ -62,7 +62,7 @@ regulator@4 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
};
regulator@5 {
@@ -74,7 +74,7 @@ regulator@5 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
};
clocks {
@@ -188,7 +188,7 @@ usb3_regulator: usb3-regulator@1 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
};
};
};
@@ -212,7 +212,7 @@ usb3_regulator: usb3-regulator@1 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
};
};
};
@@ -99,7 +99,7 @@ regulator@1 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
};
};
@@ -116,7 +116,7 @@ usb0_power: regulator@1 {
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
};
sata1_power: regulator@2 {
@@ -127,7 +127,7 @@ sata1_power: regulator@2 {
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
};
thermal-zones {
@@ -149,7 +149,7 @@ sata1_power: regulator@2 {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
};
};
@@ -99,7 +99,7 @@ usb0_power: regulator@1 {
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
};
};
};
@@ -60,7 +60,7 @@ usb_power: regulator@1 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
};
};
@@ -77,7 +77,7 @@ usb_power: regulator@0 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
};
};
};
@@ -64,7 +64,7 @@ usb_power: regulator@1 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 29 0>;
+ gpios = <&gpio0 29 0>;
};
};
};
@@ -614,7 +614,7 @@ regulator@1 {
regulator-always-on;
regulator-boot-on;
startup-delay-us = <5000000>;
- gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
regulator@2 {
@@ -627,7 +627,7 @@ regulator@2 {
regulator-always-on;
regulator-boot-on;
startup-delay-us = <5000000>;
- gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
};
};
@@ -649,7 +649,7 @@ regulator@1 {
regulator-always-on;
regulator-boot-on;
startup-delay-us = <5000000>;
- gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
};
};
@@ -671,7 +671,7 @@ regulator@1 {
regulator-always-on;
regulator-boot-on;
startup-delay-us = <5000000>;
- gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
};
regulator@2 {
@@ -684,7 +684,7 @@ regulator@2 {
regulator-always-on;
regulator-boot-on;
startup-delay-us = <5000000>;
- gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
};
};
@@ -707,7 +707,7 @@ regulator@1 {
regulator-always-on;
regulator-boot-on;
startup-delay-us = <5000000>;
- gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
};
regulator@2 {
@@ -720,7 +720,7 @@ regulator@2 {
regulator-always-on;
regulator-boot-on;
startup-delay-us = <5000000>;
- gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
};
regulator@3 {
@@ -733,7 +733,7 @@ regulator@3 {
regulator-always-on;
regulator-boot-on;
startup-delay-us = <5000000>;
- gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
regulator@4 {
@@ -746,7 +746,7 @@ regulator@4 {
regulator-always-on;
regulator-boot-on;
startup-delay-us = <5000000>;
- gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
};
};
@@ -768,7 +768,7 @@ regulator@1 {
regulator-always-on;
regulator-boot-on;
startup-delay-us = <5000000>;
- gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
};
};
@@ -791,7 +791,7 @@ regulator@2 {
regulator-always-on;
regulator-boot-on;
startup-delay-us = <5000000>;
- gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
};
regulator@3 {
@@ -804,7 +804,7 @@ regulator@3 {
regulator-always-on;
regulator-boot-on;
startup-delay-us = <5000000>;
- gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
regulator@4 {
@@ -817,7 +817,7 @@ regulator@4 {
regulator-always-on;
regulator-boot-on;
startup-delay-us = <5000000>;
- gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
};
};
};
@@ -150,7 +150,7 @@ usb_power: regulator@1 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
};
@@ -166,7 +166,7 @@ sata0_power: regulator@1 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio1 4 0>;
+ gpios = <&gpio1 4 0>;
};
};
};
@@ -95,7 +95,7 @@ wlan_reg: fixedregulator0 {
regulator-name = "wlan";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio 34 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 34 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -73,7 +73,7 @@ sata0_power: regulator@0 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
};
sata1_power: regulator@1 {
@@ -85,7 +85,7 @@ sata1_power: regulator@1 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
};
};
@@ -144,7 +144,7 @@ sata0_power: regulator@0 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
};
sata1_power: regulator@1 {
@@ -156,7 +156,7 @@ sata1_power: regulator@1 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
};
usb_power: regulator@2 {
@@ -168,7 +168,7 @@ usb_power: regulator@2 {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
};
};
};
@@ -68,7 +68,7 @@ usb_vbus: regulator@0 {
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&pio 45 GPIO_ACTIVE_HIGH>;
+ gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -110,75 +110,75 @@ gpios {
rf_on {
label = "rf on";
- gpio = <&pioA PIN_PC19 GPIO_ACTIVE_HIGH>;
+ gpios = <&pioA PIN_PC19 GPIO_ACTIVE_HIGH>;
output;
init-low;
};
wifi_on {
label = "wifi on";
- gpio = <&pioA PIN_PC20 GPIO_ACTIVE_HIGH>;
+ gpios = <&pioA PIN_PC20 GPIO_ACTIVE_HIGH>;
output;
init-low;
};
zbe_test_radio {
label = "zbe test radio";
- gpio = <&pioA PIN_PB21 GPIO_ACTIVE_HIGH>;
+ gpios = <&pioA PIN_PB21 GPIO_ACTIVE_HIGH>;
output;
init-low;
};
zbe_rst {
label = "zbe rst";
- gpio = <&pioA PIN_PB25 GPIO_ACTIVE_HIGH>;
+ gpios = <&pioA PIN_PB25 GPIO_ACTIVE_HIGH>;
output;
init-low;
};
io_reset {
label = "io reset";
- gpio = <&pioA PIN_PB30 GPIO_ACTIVE_HIGH>;
+ gpios = <&pioA PIN_PB30 GPIO_ACTIVE_HIGH>;
output;
init-low;
};
io_test_radio {
label = "io test radio";
- gpio = <&pioA PIN_PC9 GPIO_ACTIVE_HIGH>;
+ gpios = <&pioA PIN_PC9 GPIO_ACTIVE_HIGH>;
output;
init-low;
};
io_boot_0 {
label = "io boot 0";
- gpio = <&pioA PIN_PC11 GPIO_ACTIVE_HIGH>;
+ gpios = <&pioA PIN_PC11 GPIO_ACTIVE_HIGH>;
output;
init-low;
};
io_boot_1 {
label = "io boot 1";
- gpio = <&pioA PIN_PC17 GPIO_ACTIVE_HIGH>;
+ gpios = <&pioA PIN_PC17 GPIO_ACTIVE_HIGH>;
output;
init-low;
};
verbose_bootloader {
label = "verbose bootloader";
- gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
+ gpios = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
input;
};
nail_bed_detection {
label = "nail bed detection";
- gpio = <&pioA PIN_PB12 GPIO_ACTIVE_HIGH>;
+ gpios = <&pioA PIN_PB12 GPIO_ACTIVE_HIGH>;
input;
};
id_usba {
label = "id usba";
- gpio = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>;
+ gpios = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>;
input;
};
};
@@ -79,7 +79,7 @@ vcc_mmc0_reg: regulator-5 {
regulator-always-on;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
- gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+ gpios = <&pioE 2 GPIO_ACTIVE_LOW>;
};
};
@@ -28,7 +28,7 @@ reg_vcc_mmc0: regulator-mmc0 {
regulator-name = "mmc0-vcc";
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
- gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+ gpios = <&pioE 2 GPIO_ACTIVE_LOW>;
};
};
@@ -365,7 +365,7 @@ vcc_mmc0_reg: fixedregulator_mmc0 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
- gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+ gpios = <&pioE 2 GPIO_ACTIVE_LOW>;
regulator-name = "mmc0-card-supply";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -126,7 +126,7 @@ vcc_3v3_reg: fixedregulator_3v3 {
vcc_mmc0_reg: fixedregulator_mmc0 {
compatible = "regulator-fixed";
- gpio = <&pioE 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&pioE 15 GPIO_ACTIVE_HIGH>;
regulator-name = "RST_n MCI0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -155,7 +155,7 @@ panel_input: endpoint@0 {
vcc_mmc1_reg: fixedregulator_mmc1 {
compatible = "regulator-fixed";
- gpio = <&pioE 17 GPIO_ACTIVE_LOW>;
+ gpios = <&pioE 17 GPIO_ACTIVE_LOW>;
regulator-name = "VDD MCI1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -288,7 +288,7 @@ vcc_mmc1_reg: fixedregulator_mmc1 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_vcc_mmc1_reg>;
- gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
+ gpios = <&pioE 4 GPIO_ACTIVE_LOW>;
regulator-name = "VDD MCI1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -51,7 +51,7 @@ &ahb_clk {
&vbus_reg {
- gpio = <&gpio 5 0>;
+ gpios = <&gpio 5 0>;
};
/ {
@@ -115,7 +115,7 @@ MATRIX_KEY(7, 10, 0x33)
};
&vbus_reg {
- gpio = <&gpio 2 0>;
+ gpios = <&gpio 2 0>;
};
/ {
@@ -1858,7 +1858,7 @@ dvdd_1v8_lcd: regulator-vdd-lcd {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
- gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
+ gpios = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_1v8_vio>;
};
@@ -1869,7 +1869,7 @@ vdd_3v7_bl: regulator-bl-en {
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_sys>;
};
@@ -1880,7 +1880,7 @@ hdmi_5v0_sys: regulator-hdmi {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_smps10_out2>;
};
@@ -1891,7 +1891,7 @@ vdd_2v9_usd: regulator-vdd-usd {
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vcore_emmc>;
};
@@ -1902,7 +1902,7 @@ vdd_1v8_cam: regulator-cam-vio {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
- gpio = <&palmas_gpio 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&palmas_gpio 6 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_1v8_vio>;
};
@@ -1913,7 +1913,7 @@ vdd_1v2_xusb: regulator-xusb-vio {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-boot-on;
- gpio = <&palmas_gpio 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&palmas_gpio 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -1923,7 +1923,7 @@ vdd_3v3_xusb: regulator-xusb-vdd {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
- gpio = <&palmas_gpio 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&palmas_gpio 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -1934,7 +1934,7 @@ vdd_3v3_com: regulator-com {
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
};
@@ -1945,7 +1945,7 @@ vdd_3v3_touch: regulator-touch-pwr {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
};
@@ -1956,7 +1956,7 @@ vdd_1v8_touch: regulator-touch-vio {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
};
@@ -1203,7 +1203,7 @@ dvdd_ts_reg: regulator-ts {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
};
usb1_vbus_reg: regulator-usb1 {
@@ -1212,7 +1212,7 @@ usb1_vbus_reg: regulator-usb1 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&tps65090_dcdc1_reg>;
};
@@ -1223,7 +1223,7 @@ usb3_vbus_reg: regulator-usb3 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&tps65090_dcdc1_reg>;
};
@@ -1242,7 +1242,7 @@ vdd_cam_1v8_reg: regulator-cam {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
enable-active-high;
- gpio = <&palmas_gpio 6 0>;
+ gpios = <&palmas_gpio 6 0>;
};
vdd_5v0_hdmi: regulator-hdmicon {
@@ -1250,7 +1250,7 @@ vdd_5v0_hdmi: regulator-hdmicon {
regulator-name = "VDD_5V0_HDMI_CON";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&tps65090_dcdc1_reg>;
};
@@ -1062,7 +1062,7 @@ vdd_lcd: regulator-lcd {
regulator-max-microvolt = <1800000>;
vin-supply = <&vdd_1v8>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
regulator-boot-on;
};
@@ -1071,7 +1071,7 @@ regulator-1v8ts {
regulator-name = "vdd_1v8_ts";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_LOW>;
+ gpios = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_LOW>;
regulator-boot-on;
};
@@ -1081,7 +1081,7 @@ regulator-3v3ts {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
regulator-boot-on;
};
@@ -1092,7 +1092,7 @@ regulator-1v8com {
regulator-max-microvolt = <1800000>;
vin-supply = <&vdd_1v8>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
regulator-boot-on;
};
@@ -1103,7 +1103,7 @@ regulator-3v3com {
regulator-max-microvolt = <3300000>;
vin-supply = <&vdd_3v3_sys>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
regulator-always-on;
regulator-boot-on;
};
@@ -319,7 +319,7 @@ lcd_bl_en: regulator-lcden {
regulator-name = "VDD_LCD_BL";
regulator-min-microvolt = <16500000>;
regulator-max-microvolt = <16500000>;
- gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vs_sys>;
regulator-boot-on;
@@ -330,7 +330,7 @@ vdd_lcd: regulator-lcd {
regulator-name = "VD_LCD_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
+ gpios = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_1v8>;
regulator-boot-on;
@@ -239,7 +239,7 @@ reg_usbo1_vbus: regulator-usbo1-vbus {
regulator-name = "VCC_USBO1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <®_5v0>;
};
@@ -250,7 +250,7 @@ reg_usbh_vbus: regulator-usbh-vbus {
regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <®_5v0>;
};
@@ -241,7 +241,7 @@ reg_usbo1_vbus: regulator-usbo1-vbus {
regulator-name = "VCC_USBO1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <®_5v0>;
};
@@ -252,7 +252,7 @@ reg_usbh_vbus: regulator-usbh-vbus {
regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <®_5v0>;
};
@@ -1981,7 +1981,7 @@ reg_1v05_avdd_hdmi_pll: regulator-1v05-avdd-hdmi-pll {
regulator-name = "+V1.05_AVDD_HDMI_PLL";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
- gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+ gpios = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
vin-supply = <®_1v05_vdd>;
};
@@ -2010,7 +2010,7 @@ reg_module_3v3: regulator-module-3v3 {
regulator-always-on;
regulator-boot-on;
/* PWR_EN_+V3.3 */
- gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <®_3v3_mxm>;
};
@@ -1973,7 +1973,7 @@ reg_1v05_avdd_hdmi_pll: regulator-1v05-avdd-hdmi-pll {
regulator-name = "+V1.05_AVDD_HDMI_PLL";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
- gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+ gpios = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
vin-supply = <®_1v05_vdd>;
};
@@ -2002,7 +2002,7 @@ reg_module_3v3: regulator-module-3v3 {
regulator-always-on;
regulator-boot-on;
/* PWR_EN_+V3.3 */
- gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <®_3v3_mxm>;
};
@@ -1935,7 +1935,7 @@ vdd_3v3_run: regulator-3v3run {
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
- gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
};
@@ -1953,7 +1953,7 @@ vdd_usb1_vbus: regulator-usb1 {
regulator-name = "+USB0_VBUS_SW";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
enable-active-high;
gpio-open-drain;
vin-supply = <&vdd_5v0_sys>;
@@ -1964,7 +1964,7 @@ vdd_usb3_vbus: regulator-usb3 {
regulator-name = "+5V_USB_HS";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
enable-active-high;
gpio-open-drain;
vin-supply = <&vdd_5v0_sys>;
@@ -1977,7 +1977,7 @@ vdd_3v3_lp0: regulator-lp0 {
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
- gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
};
@@ -1987,7 +1987,7 @@ vdd_hdmi_pll: regulator-hdmipll {
regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
- gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+ gpios = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
vin-supply = <&vdd_1v05_run>;
};
@@ -1996,7 +1996,7 @@ vdd_5v0_hdmi: regulator-hdmicon {
regulator-name = "+5V_HDMI_CON";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_sys>;
};
@@ -2007,7 +2007,7 @@ vdd_5v0_sata: regulator-5v0sata {
regulator-name = "+5V_SATA";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_sys>;
};
@@ -2017,7 +2017,7 @@ vdd_12v0_sata: regulator-12v0sata {
regulator-name = "+12V_SATA";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
- gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_mux>;
};
@@ -679,7 +679,7 @@ vdd_3v3_run: regulator-3v3run {
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
- gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
};
@@ -695,7 +695,7 @@ vdd_3v3_hdmi: regulator-3v3hdmi {
vdd_led: regulator-led {
compatible = "regulator-fixed";
regulator-name = "+VDD_LED";
- gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_mux>;
};
@@ -706,7 +706,7 @@ vdd_5v0_ts: regulator-ts {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_sys>;
};
@@ -716,7 +716,7 @@ vdd_usb1_vbus: regulator-usb1 {
regulator-name = "+5V_USB_HS";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
enable-active-high;
gpio-open-drain;
vin-supply = <&vdd_5v0_sys>;
@@ -727,7 +727,7 @@ vdd_usb3_vbus: regulator-usb3 {
regulator-name = "+5V_USB_SS";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
enable-active-high;
gpio-open-drain;
vin-supply = <&vdd_5v0_sys>;
@@ -738,7 +738,7 @@ vdd_3v3_panel: regulator-panel {
regulator-name = "+3.3V_PANEL";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_run>;
};
@@ -753,7 +753,7 @@ vdd_3v3_lp0: regulator-lp0 {
* controllers so that it can be enabled on demand.
*/
regulator-always-on;
- gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
};
@@ -763,7 +763,7 @@ vdd_hdmi_pll: regulator-hdmipll {
regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
- gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+ gpios = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
vin-supply = <&vdd_1v05_run>;
};
@@ -772,7 +772,7 @@ vdd_5v0_hdmi: regulator-hdmicon {
regulator-name = "+5V_HDMI_CON";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_sys>;
};
@@ -1127,7 +1127,7 @@ vdd_3v3_run: regulator-3v3run {
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
- gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
};
@@ -1145,7 +1145,7 @@ vdd_led: regulator-led {
regulator-name = "+VDD_LED";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_mux>;
};
@@ -1156,7 +1156,7 @@ vdd_5v0_ts: regulator-ts {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_sys>;
};
@@ -1166,7 +1166,7 @@ vdd_usb1_vbus: regulator-usb1 {
regulator-name = "+5V_USB_HS";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
enable-active-high;
gpio-open-drain;
vin-supply = <&vdd_5v0_sys>;
@@ -1177,7 +1177,7 @@ vdd_usb3_vbus: regulator-usb3 {
regulator-name = "+5V_USB_SS";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
enable-active-high;
gpio-open-drain;
vin-supply = <&vdd_5v0_sys>;
@@ -1188,7 +1188,7 @@ vdd_3v3_panel: regulator-panel {
regulator-name = "+3.3V_PANEL";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_run>;
};
@@ -1203,7 +1203,7 @@ vdd_3v3_lp0: regulator-lp0 {
* controllers so that it can be enabled on demand.
*/
regulator-always-on;
- gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
};
@@ -1213,7 +1213,7 @@ vdd_hdmi_pll: regulator-hdmipll {
regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
- gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+ gpios = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
vin-supply = <&vdd_1v05_run>;
};
@@ -1222,7 +1222,7 @@ vdd_5v0_hdmi: regulator-hdmicon {
regulator-name = "+5V_HDMI_CON";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_sys>;
};
@@ -1402,7 +1402,7 @@ vdd_pnl: regulator-panel {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <300000>;
- gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_sys>;
};
@@ -1143,7 +1143,7 @@ regulator-pcie {
regulator-name = "pcie_vdd";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
- gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
regulator-always-on;
};
@@ -1152,7 +1152,7 @@ vdd_pnl_reg: regulator-panel {
regulator-name = "vdd_pnl";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -1172,7 +1172,7 @@ vdd_hdmi_en: regulator-hdmi {
regulator-max-microvolt = <5000000>;
regulator-always-on;
vin-supply = <&vdd_5v0_sys>;
- gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -258,7 +258,7 @@ reg_usbh_vbus: regulator-usbh-vbus {
regulator-name = "VCC_USB[1-4]";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
vin-supply = <®_5v0>;
};
};
@@ -240,7 +240,7 @@ reg_usbh_vbus: regulator-usbh-vbus {
regulator-name = "VCC_USB1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
vin-supply = <®_5v0>;
};
};
@@ -748,7 +748,7 @@ reg_lan_v_bus: regulator-lan-v-bus {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
};
reg_module_3v3: regulator-module-3v3 {
@@ -680,7 +680,7 @@ regulator-1v5 {
regulator-name = "vdd_1v5";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
- gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
};
regulator-1v2 {
@@ -688,7 +688,7 @@ regulator-1v2 {
regulator-name = "vdd_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -697,7 +697,7 @@ pci_vdd_reg: regulator-1v05 {
regulator-name = "vdd_1v05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
- gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -706,7 +706,7 @@ vdd_pnl_reg: regulator-pn1 {
regulator-name = "vdd_pnl";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -715,7 +715,7 @@ vdd_bl_reg: regulator-bl {
regulator-name = "vdd_bl";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -724,7 +724,7 @@ vdd_5v0_hdmi: regulator-hdmi {
regulator-name = "VDDIO_HDMI";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(T, 2) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(T, 2) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_reg>;
};
@@ -702,7 +702,7 @@ vdd_pnl_reg: regulator-3v0 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -842,7 +842,7 @@ regulator-1v5 {
regulator-name = "vdd_1v5";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
- gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
};
regulator-1v2 {
@@ -850,7 +850,7 @@ regulator-1v2 {
regulator-name = "vdd_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -860,7 +860,7 @@ vbus_reg: regulator-vbus {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(D, 0) 0>;
+ gpios = <&gpio TEGRA_GPIO(D, 0) 0>;
regulator-always-on;
regulator-boot-on;
};
@@ -870,7 +870,7 @@ vdd_pnl_reg: regulator-pnl {
regulator-name = "vdd_pnl";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -879,7 +879,7 @@ vdd_bl_reg: regulator-bl {
regulator-name = "vdd_bl";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -888,7 +888,7 @@ vdd_hdmi: regulator-hdmi {
regulator-name = "VDDIO_HDMI";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_reg>;
};
@@ -516,7 +516,7 @@ pci_vdd_reg: regulator-1v05 {
regulator-name = "vdd_1v05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
- gpio = <&pmic 2 0>;
+ gpios = <&pmic 2 0>;
enable-active-high;
};
};
@@ -455,7 +455,7 @@ vbus_reg: regulator-vbus {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(V, 2) 0>;
+ gpios = <&gpio TEGRA_GPIO(V, 2) 0>;
regulator-always-on;
regulator-boot-on;
};
@@ -661,7 +661,7 @@ regulator-1v5 {
regulator-name = "vdd_1v5";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
- gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
};
regulator-1v2 {
@@ -669,7 +669,7 @@ regulator-1v2 {
regulator-name = "vdd_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -678,7 +678,7 @@ vdd_pnl_reg: regulator-pnl {
regulator-name = "vdd_pnl";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -687,7 +687,7 @@ vdd_bl_reg: regulator-bl {
regulator-name = "vdd_bl";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -232,7 +232,7 @@ reg_usbo1_vbus: regulator-usbo1-vbus {
regulator-name = "VCC_USBO1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <®_5v0>;
};
@@ -243,7 +243,7 @@ reg_usbh_vbus: regulator-usbh-vbus {
regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <®_5v0>;
};
@@ -233,7 +233,7 @@ reg_usbo1_vbus: regulator-usbo1-vbus {
regulator-name = "VCC_USBO1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <®_5v0>;
};
@@ -244,7 +244,7 @@ reg_usbh_vbus: regulator-usbh-vbus {
regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <®_5v0>;
};
@@ -1142,7 +1142,7 @@ reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
vin-supply = <®_1v8_vio>;
};
@@ -1152,7 +1152,7 @@ reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
vin-supply = <®_module_3v3>;
};
@@ -1125,7 +1125,7 @@ reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
vin-supply = <®_1v8_vio>;
};
@@ -1135,7 +1135,7 @@ reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
vin-supply = <®_module_3v3>;
};
@@ -1188,7 +1188,7 @@ vdd_pnl: regulator-panel {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <300000>;
- gpio = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
};
@@ -167,7 +167,7 @@ ldo8 {
};
vdd_3v3_sys: regulator-3v3 {
- gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -178,7 +178,7 @@ regulator-usb {
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
- gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
};
@@ -144,7 +144,7 @@ vdd_core: core-regulator@60 {
};
vdd_3v3_sys: regulator-3v3 {
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -816,7 +816,7 @@ vdd_1v2_mipi: regulator-mipi {
regulator-max-microvolt = <1200000>;
regulator-enable-ramp-delay = <10000>;
regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(BB, 3) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(BB, 3) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
};
@@ -1588,7 +1588,7 @@ vdd_5v0_cp: regulator-sby {
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
- gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_bat>;
};
@@ -1600,7 +1600,7 @@ vdd_5v0_sys: regulator-5v {
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
- gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_bat>;
};
@@ -1612,7 +1612,7 @@ vdd_1v5_ddr: regulator-ddr {
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
- gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_bat>;
};
@@ -1624,7 +1624,7 @@ vdd_3v3_sys: regulator-3v {
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_bat>;
};
@@ -1635,7 +1635,7 @@ vdd_pnl: regulator-panel {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <20000>;
- gpio = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
};
@@ -1646,7 +1646,7 @@ vdd_3v3_com: regulator-com {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
- gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
};
@@ -1657,7 +1657,7 @@ vdd_5v0_bl: regulator-bl {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_bat>;
};
@@ -1667,7 +1667,7 @@ hdmi_5v0_sys: regulator-hdmi {
regulator-name = "hdmi_5v0_sys";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_sys>;
};
@@ -2027,7 +2027,7 @@ chargepump_5v_reg: regulator-chargepump {
regulator-boot-on;
regulator-always-on;
enable-active-high;
- gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
};
ddr_reg: regulator-ddr {
@@ -2038,7 +2038,7 @@ ddr_reg: regulator-ddr {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 7 GPIO_ACTIVE_HIGH>;
vin-supply = <&vdd_5v_in_reg>;
};
@@ -2050,7 +2050,7 @@ vdd_5v_sata_reg: regulator-sata {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
vin-supply = <&vdd_5v_in_reg>;
};
@@ -2060,7 +2060,7 @@ usb1_vbus_reg: regulator-usb1 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v_in_reg>;
};
@@ -2071,7 +2071,7 @@ usb3_vbus_reg: regulator-usb3 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v_in_reg>;
};
@@ -2084,7 +2084,7 @@ sys_3v3_reg: regulator-3v3 {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
vin-supply = <&vdd_5v_in_reg>;
};
@@ -2096,7 +2096,7 @@ sys_3v3_pexs_reg: regulator-pexs {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
@@ -24,7 +24,7 @@ ddr_reg: regulator-ddr {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
};
sys_3v3_reg: regulator-3v3 {
@@ -35,7 +35,7 @@ sys_3v3_reg: regulator-3v3 {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 7 GPIO_ACTIVE_HIGH>;
};
usb1_vbus_reg: regulator-usb1 {
@@ -44,7 +44,7 @@ usb1_vbus_reg: regulator-usb1 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v0_reg>;
};
@@ -55,7 +55,7 @@ usb3_vbus_reg: regulator-usb3 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v0_reg>;
};
@@ -66,7 +66,7 @@ vdd_5v0_reg: regulator-5v0 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 2 GPIO_ACTIVE_HIGH>;
};
vdd_bl_reg: regulator-bl {
@@ -77,7 +77,7 @@ vdd_bl_reg: regulator-bl {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>;
};
};
@@ -24,7 +24,7 @@ ddr_reg: regulator-ddr {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 7 GPIO_ACTIVE_HIGH>;
};
sys_3v3_reg: regulator-3v3 {
@@ -35,7 +35,7 @@ sys_3v3_reg: regulator-3v3 {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
};
usb1_vbus_reg: regulator-usb1 {
@@ -44,7 +44,7 @@ usb1_vbus_reg: regulator-usb1 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v0_reg>;
};
@@ -55,7 +55,7 @@ usb3_vbus_reg: regulator-usb3 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v0_reg>;
};
@@ -66,7 +66,7 @@ vdd_5v0_reg: regulator-5v0 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 8 GPIO_ACTIVE_HIGH>;
};
vdd_bl_reg: regulator-bl {
@@ -77,7 +77,7 @@ vdd_bl_reg: regulator-bl {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
};
vdd_bl2_reg: regulator-bl2 {
@@ -88,6 +88,6 @@ vdd_bl2_reg: regulator-bl2 {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
};
};
@@ -522,7 +522,7 @@ cam_1v8_reg: regulator-cam {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
vin-supply = <&vio_reg>;
};
@@ -534,7 +534,7 @@ cp_5v_reg: regulator-5v0cp {
regulator-boot-on;
regulator-always-on;
enable-active-high;
- gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
};
emmc_3v3_reg: regulator-emmc {
@@ -545,7 +545,7 @@ emmc_3v3_reg: regulator-emmc {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
@@ -555,7 +555,7 @@ modem_3v3_reg: regulator-modem {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
};
pex_hvdd_3v3_reg: regulator-pex {
@@ -564,7 +564,7 @@ pex_hvdd_3v3_reg: regulator-pex {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
@@ -574,7 +574,7 @@ vdd_cam1_ldo_reg: regulator-cam1 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
@@ -584,7 +584,7 @@ vdd_cam2_ldo_reg: regulator-cam2 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
@@ -594,7 +594,7 @@ vdd_cam3_ldo_reg: regulator-cam3 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
@@ -606,7 +606,7 @@ vdd_com_reg: regulator-com {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
@@ -616,7 +616,7 @@ vdd_fuse_3v3_reg: regulator-fuse {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
@@ -628,7 +628,7 @@ vdd_pnl1_reg: regulator-pnl1 {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
@@ -638,7 +638,7 @@ vdd_vid_reg: regulator-vid {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v0_reg>;
};
@@ -194,7 +194,7 @@ reg_usbh_vbus: regulator-usbh-vbus {
regulator-name = "VCC_USB[1-4]";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
vin-supply = <®_5v0>;
};
};
@@ -994,7 +994,7 @@ reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
vin-supply = <®_1v8_vio>;
};
@@ -1004,7 +1004,7 @@ reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
vin-supply = <®_module_3v3>;
};
@@ -1022,7 +1022,7 @@ reg_lan_v_bus: regulator-lan-v-bus {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
};
reg_module_3v3: regulator-module-3v3 {
@@ -482,7 +482,7 @@ led-power {
};
regulator-lcd3v {
- gpio = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -1590,7 +1590,7 @@ vdd_3v0_sen: regulator-sen3v {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_vbat>;
};
@@ -1601,7 +1601,7 @@ vdd_3v0_proxi: regulator-proxi {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_vbat>;
};
@@ -1612,7 +1612,7 @@ vdd_1v8_sen: regulator-sen1v8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_vbat>;
};
@@ -1632,7 +1632,7 @@ iovcc_1v8_lcd: regulator-lcd1v8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(Y, 0) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(Y, 0) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_vbat>;
};
@@ -1643,7 +1643,7 @@ vio_1v8_mhl: regulator-mhl1v8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_vbat>;
};
@@ -1654,7 +1654,7 @@ vdd_3v0_touch: regulator-touchpwr {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(Q, 1) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(Q, 1) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_vbat>;
};
@@ -1665,7 +1665,7 @@ vdd_1v8_touch: regulator-touchvio {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_vbat>;
};
@@ -1676,7 +1676,7 @@ vcc_1v8_gps: regulator-gps {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(Y, 1) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(Y, 1) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_vbat>;
};
@@ -1686,7 +1686,7 @@ vio_1v8_front: regulator-frontvio {
regulator-name = "vt_1v8_cam_vio";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio TEGRA_GPIO(Y, 2) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(Y, 2) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_vbat>;
};
@@ -4674,7 +4674,7 @@ sdmmc_3v3_reg: regulator-sdmmc-3v3 {
regulator-max-microvolt = <3300000>;
enable-active-high;
regulator-always-on;
- gpio = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
};
@@ -4684,7 +4684,7 @@ vdd_fuse_3v3_reg: regulator-vdd-fuse-3v3 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
vin-supply = <&sys_3v3_reg>;
regulator-always-on;
};
@@ -4695,7 +4695,7 @@ vdd_vid_reg: regulator-vdd-vid {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>;
vin-supply = <&vdd_5v0_reg>;
regulator-boot-on;
};
@@ -4707,7 +4707,7 @@ ddr_reg: regulator-ddr {
regulator-max-microvolt = <1500000>;
regulator-always-on;
enable-active-high;
- gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 7 GPIO_ACTIVE_HIGH>;
regulator-boot-on;
vin-supply = <&vdd_12v_in>;
};
@@ -4718,7 +4718,7 @@ sys_3v3_reg: regulator-sys-3v3 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vdd_12v_in>;
@@ -4730,7 +4730,7 @@ vdd_5v0_reg: regulator-vdd-5v0 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vdd_12v_in>;
@@ -4740,7 +4740,7 @@ vdd_smsc: regulator-vdd-smsc {
compatible = "regulator-fixed";
regulator-name = "vdd_smsc";
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(DD, 5) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(DD, 5) GPIO_ACTIVE_HIGH>;
};
usb3_vbus_reg: regulator-usb3-vbus {
@@ -4749,7 +4749,7 @@ usb3_vbus_reg: regulator-usb3-vbus {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
vin-supply = <&vdd_5v0_reg>;
};
@@ -1454,7 +1454,7 @@ vdd_pnl: regulator-panel {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-enable-ramp-delay = <300000>;
- gpio = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
};
@@ -1464,7 +1464,7 @@ vdd_3v3_sen: regulator-sensors {
regulator-name = "sen_3v3_en";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio TEGRA_GPIO(K, 5) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(K, 5) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_3v3_sys>;
};
@@ -1475,7 +1475,7 @@ vdd_5v0_bl: regulator-bl {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
- gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_sys>;
};
@@ -1485,7 +1485,7 @@ hdmi_5v0_sys: regulator-hdmi {
regulator-name = "hdmi_5v0_sys";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_sys>;
};
@@ -1495,7 +1495,7 @@ vdd_vbus_usb1: regulator-usb1 {
regulator-name = "vdd_vbus_micro_usb";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_sys>;
};
@@ -1505,7 +1505,7 @@ vdd_vbus_usb3: regulator-usb3 {
regulator-name = "vdd_vbus_typea_usb";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(CC, 6) GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio TEGRA_GPIO(CC, 6) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_sys>;
};
@@ -62,7 +62,7 @@ reg_wifi: regulator-wifi {
regulator-name = "SD3_SPWR";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -74,7 +74,7 @@ reg_wifi: regulator-wifi {
regulator-name = "SD3_SPWR";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -37,7 +37,7 @@ reg_lcd_3v3: regulator-0 {
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -19,7 +19,7 @@ reg_fec_phy: regulator-0 {
regulator-name = "fec-phy";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio4 9 0>;
+ gpios = <&gpio4 9 0>;
enable-active-high;
};
@@ -21,7 +21,7 @@ reg_fec_3v3: regulator-0 {
regulator-name = "fec-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 3 0>;
+ gpios = <&gpio2 3 0>;
enable-active-high;
};
@@ -44,7 +44,7 @@ reg_can_3v3: regulator-3 {
regulator-name = "can-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio4 6 0>;
+ gpios = <&gpio4 6 0>;
};
sound {
@@ -61,7 +61,7 @@ reg_lcd: regulator-0 {
regulator-name = "LCD";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -44,7 +44,7 @@ regulator-2 {
regulator-name = "CSI_EN";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
regulator-always-on;
};
@@ -180,7 +180,7 @@ reg_hub_reset: regulator-hub-reset {
regulator-name = "hub_reset";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -50,7 +50,7 @@ reg_can: regulator-can {
regulator-name = "CAN_RST";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
startup-delay-us = <20000>;
enable-active-high;
};
@@ -39,7 +39,7 @@ backlight_reg: regulator-backlight {
regulator-name = "enable_lcd_reg";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -30,7 +30,7 @@ usb_vbus: regulator-usb-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_mmc_reset>;
- gpio = <&gpio3 13 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
startup-delay-us = <150000>;
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
@@ -30,7 +30,7 @@ usb_vbus: regulator-usb-vbus {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_mmc_reset>;
- gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
startup-delay-us = <150000>;
};
};
@@ -125,7 +125,7 @@ reg_usb_vbus: regulator-vbus {
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -70,7 +70,7 @@ reg_usbh1_vbus: regulator-usbh1-vbus {
regulator-name = "vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 2 0>;
+ gpios = <&gpio1 2 0>;
};
reg_usb_otg_vbus: regulator-usb-otg-vbus {
@@ -78,7 +78,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 4 0>;
+ gpios = <&gpio1 4 0>;
};
sound {
@@ -103,7 +103,7 @@ reg_usbh1_vbus: regulator-usbh1-vbus {
regulator-name = "vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 2 0>;
+ gpios = <&gpio1 2 0>;
};
};
@@ -41,7 +41,7 @@ display1_in: endpoint {
reg_backlight: regulator-backlight {
compatible = "regulator-fixed";
regulator-name = "lcd-supply";
- gpio = <&gpio2 5 0>;
+ gpios = <&gpio2 5 0>;
startup-delay-us = <5000>;
};
@@ -104,7 +104,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
pinctrl-0 = <&pinctrl_usb_otg_vbus>;
- gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -123,7 +123,7 @@ reg_usbh2_vbus: regulator-usbh2-vbus {
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh2_vbus>;
- gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -134,7 +134,7 @@ reg_usbh3_vbus: regulator-usbh3-vbus {
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh3_vbus>;
- gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -112,7 +112,7 @@ reg_usb_vbus: regulator-usb-vbus {
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio7 8 0>;
+ gpios = <&gpio7 8 0>;
enable-active-high;
};
@@ -34,7 +34,7 @@ reg_usb1_vbus: regulator-usb-vbus {
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -43,7 +43,7 @@ reg_usb_otg_vbus: regulator-otg-vbus {
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -206,7 +206,7 @@ reg_lcd_pwr: regulator-lcd-pwr {
regulator-name = "LCD POWER";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
@@ -216,7 +216,7 @@ reg_lcd_reset: regulator-lcd-reset {
regulator-name = "LCD RESET";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
@@ -104,7 +104,7 @@ reg_lcd_pwr0: regulator-lvds0-pwr {
regulator-name = "LVDS0 POWER";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
@@ -114,7 +114,7 @@ reg_lcd_pwr1: regulator-lvds1-pwr {
regulator-name = "LVDS1 POWER";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
@@ -122,7 +122,7 @@ reg_can_xcvr: regulator-can-xcvr {
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can_xcvr>;
- gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
};
reg_usbh1_vbus: regulator-usbh1-vbus {
@@ -132,7 +132,7 @@ reg_usbh1_vbus: regulator-usbh1-vbus {
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1_vbus>;
- gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -143,7 +143,7 @@ reg_usbotg_vbus: regulator-usbotg-vbus {
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg_vbus>;
- gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -28,7 +28,7 @@ reg_usb_vbus: regulator-usb-vbus {
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 31 0>; /* PEN */
+ gpios = <&gpio3 31 0>; /* PEN */
enable-active-high;
};
};
@@ -76,7 +76,7 @@ reg_usb_otg_vbus: regulator-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -87,7 +87,7 @@ reg_usb_h1_vbus: regulator-usb-h1-vbus {
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
@@ -99,7 +99,7 @@ reg_3v3: regulator-3v3 {
regulator-name = "reg_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
regulator-always-on;
@@ -112,7 +112,7 @@ reg_enet: regulator-ethernet {
regulator-name = "ethernet-supply";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 31 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
vin-supply = <&sw4_reg>;
@@ -125,7 +125,7 @@ reg_audio: regulator-audio {
regulator-name = "3v3_aud";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <®_3v3>;
};
@@ -137,7 +137,7 @@ reg_hdmi: regulator-hdmi {
regulator-name = "hdmi-supply";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <®_3v3>;
};
@@ -147,7 +147,7 @@ reg_uart3: regulator-uart3 {
pinctrl-0 = <&pinctrl_reg_uart3>;
compatible = "regulator-fixed";
regulator-name = "uart3-supply";
- gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
vin-supply = <®_3v3>;
@@ -158,7 +158,7 @@ reg_1v8: regulator-1v8 {
pinctrl-0 = <&pinctrl_reg_1v8>;
compatible = "regulator-fixed";
regulator-name = "1v8-supply";
- gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 30 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
vin-supply = <®_3v3>;
@@ -171,7 +171,7 @@ reg_pcie: regulator-pcie {
regulator-name = "mpcie_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -182,7 +182,7 @@ reg_mipi: regulator-mipi {
regulator-name = "mipi_pwr_en";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -20,7 +20,7 @@ reg_wl18xx_vmmc: regulator-wl18xx {
regulator-name = "vwl1837";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
@@ -119,7 +119,7 @@ reg_h1_vbus: regulator-h1-vbus {
regulator-name = "h1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -128,7 +128,7 @@ reg_otg_vbus: regulator-otg-vbus {
regulator-name = "otg-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -80,7 +80,7 @@ reg_5v0_audio: regulator-5v0-audio {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <®_5v>;
- gpio = <&tca6424a 16 GPIO_ACTIVE_HIGH>;
+ gpios = <&tca6424a 16 GPIO_ACTIVE_HIGH>;
enable-active-high;
/*
* This must be always-on for da7212, which has some not
@@ -99,7 +99,7 @@ reg_3v3_audio: regulator-3v3-audio {
vin-supply = <®_3v3>;
pinctrl-0 = <&pinctrl_q7_hda_reset>;
pinctrl-names = "default";
- gpio = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -121,7 +121,7 @@ reg_wlan: regulator-wlan {
vin-supply = <®_3v3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_q7_sdio_power>;
- gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
enable-active-high;
startup-delay-us = <70000>;
};
@@ -134,7 +134,7 @@ reg_bl: regulator-backlight {
vin-supply = <®_syspwr>;
pinctrl-0 = <&pinctrl_q7_lcd_power>;
pinctrl-names = "default";
- gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -19,7 +19,7 @@ reg_3v3_vmmc: regulator-3v3-vmmc {
regulator-name = "3v3_vmmc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
startup-delay-us = <100>;
enable-active-high;
};
@@ -38,7 +38,7 @@ reg_usb_h1_vbus: regulator-usb-h1-vbus {
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -85,7 +85,7 @@ reg_otg_vbus: regulator-otg-vbus {
regulator-name = "otg-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -71,7 +71,7 @@ reg_lcd_3v3: regulator-lcd-dvdd {
regulator-name = "lcd-dvdd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 1 0>;
+ gpios = <&gpio3 1 0>;
enable-active-high;
startup-delay-us = <21000>;
};
@@ -81,7 +81,7 @@ reg_lcd_power: regulator-lcd-power {
regulator-name = "lcd-enable";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 6 0>;
+ gpios = <&gpio3 6 0>;
enable-active-high;
vin-supply = <®_lcd_3v3>;
};
@@ -91,7 +91,7 @@ reg_lcd_vgl: regulator-lcd-vgl {
regulator-name = "lcd-vgl";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
startup-delay-us = <6000>;
enable-active-high;
vin-supply = <®_lcd_power>;
@@ -102,7 +102,7 @@ reg_lcd_vgh: regulator-lcd-vgh {
regulator-name = "lcd-vgh";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 31 GPIO_ACTIVE_HIGH>;
startup-delay-us = <6000>;
enable-active-high;
vin-supply = <®_lcd_avdd>;
@@ -113,7 +113,7 @@ reg_lcd_vcom: regulator-lcd-vcom {
regulator-name = "lcd-vcom";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
startup-delay-us = <11000>;
enable-active-high;
vin-supply = <®_lcd_vgh>;
@@ -124,7 +124,7 @@ reg_lcd_lr: regulator-lcd-lr {
regulator-name = "lcd-lr";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <®_lcd_vcom>;
};
@@ -134,7 +134,7 @@ reg_lcd_avdd: regulator-lcd-avdd {
regulator-name = "lcd-avdd";
regulator-min-microvolt = <10280000>;
regulator-max-microvolt = <10280000>;
- gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
startup-delay-us = <6000>;
enable-active-high;
vin-supply = <®_lcd_vgl>;
@@ -147,7 +147,7 @@ reg_usb_host: regulator-usb-vbus {
pinctrl-0 = <&pinctrl_usbhost>;
regulator-min-microvolt = <50000000>;
regulator-max-microvolt = <50000000>;
- gpio = <&gpio6 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 6 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -158,7 +158,7 @@ reg_wl18xx_vmmc: regulator-wl18xx-vmcc {
pinctrl-0 = <&pinctrl_wlan>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
@@ -215,7 +215,7 @@ reg_h1_vbus: regulator-h1-vbus {
regulator-name = "h1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -224,7 +224,7 @@ reg_otg_vbus: regulator-otg-vbus {
regulator-name = "otg-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -196,7 +196,7 @@ reg_bl_12v0: regulator-bl-12v0 {
regulator-name = "bl-12v0";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
- gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -71,7 +71,7 @@ reg_usb_otg_vbus: regulator-usbotgvbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
};
};
@@ -117,7 +117,7 @@ reg_backlight: regulator-backlight {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_backlight>;
enable-active-high;
- gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
regulator-name = "backlight";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
@@ -128,7 +128,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usbotg_vbus>;
enable-active-high;
- gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -72,7 +72,7 @@ reg_pcie: regulator-pcie {
regulator-name = "MPCIE_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
status = "disabled";
};
@@ -84,7 +84,7 @@ reg_usb_h1_vbus: regulator-usb-h1-vbus {
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
enable-active-high;
status = "disabled";
};
@@ -96,7 +96,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -86,7 +86,7 @@ reg_usb_h1_vbus: regulator-usb-h1-vbus {
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
enable-active-high;
status = "disabled";
};
@@ -98,7 +98,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -15,7 +15,7 @@ / {
reg_3v3_mmc: regulator-3v3-mmc {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
off-on-delay-us = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enable_3v3_mmc>;
@@ -28,7 +28,7 @@ reg_3v3_mmc: regulator-3v3-mmc {
reg_3v3_sd: regulator-3v3-sd {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
off-on-delay-us = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enable_3v3_sd>;
@@ -41,7 +41,7 @@ reg_3v3_sd: regulator-3v3-sd {
reg_can1: regulator-can1 {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enable_can1_power>;
regulator-name = "5V_SW_CAN1";
@@ -51,7 +51,7 @@ reg_can1: regulator-can1 {
reg_can2: regulator-can2 {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enable_can2_power>;
regulator-name = "5V_SW_CAN2";
@@ -17,7 +17,7 @@ / {
reg_pcie_switch: regulator-pcie-switch {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
regulator-max-microvolt = <1800000>;
regulator-min-microvolt = <1800000>;
regulator-name = "pcie_switch";
@@ -60,7 +60,7 @@ led5-red {
reg_3v3_vmmc: regulator-3v3-vmmc {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enable_3v3_vmmc>;
regulator-max-microvolt = <3300000>;
@@ -72,7 +72,7 @@ reg_3v3_vmmc: regulator-3v3-vmmc {
reg_can1_supply: regulator-can1-supply {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enable_can1_power>;
regulator-name = "can1_supply";
@@ -82,7 +82,7 @@ reg_can1_supply: regulator-can1-supply {
reg_can2_supply: regulator-can2-supply {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enable_can2_power>;
regulator-name = "can2_supply";
@@ -30,7 +30,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 0>;
+ gpios = <&gpio3 22 0>;
enable-active-high;
};
@@ -108,7 +108,7 @@ reg_lvds: regulator-lvds {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -125,7 +125,7 @@ reg_usb_otg_vbus: regulator-usbotgvbus {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
pinctrl-0 = <&pinctrl_usbotg_vbus>;
- gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -196,7 +196,7 @@ reg_lcd: regulator-lcd {
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd_enable>;
- gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
@@ -60,7 +60,7 @@ reg_wl18xx_vmmc: regulator-wl18xx {
regulator-name = "vwl1807";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&pca9539 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&pca9539 3 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
@@ -72,7 +72,7 @@ reg_wlan: regulator-wlan {
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
};
sound {
@@ -78,7 +78,7 @@ reg_pcie_power_on_gpio: regulator-pcie-power-on-gpio {
regulator-name = "regulator-pcie-power-on-gpio";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
};
reg_usb_h1_vbus: usb_h1_vbus {
@@ -86,7 +86,7 @@ reg_usb_h1_vbus: usb_h1_vbus {
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -95,7 +95,7 @@ reg_usb_otg_vbus: usb_otg_vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -96,13 +96,13 @@ reg_lvds: regulator-lvds {
regulator-always-on;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_lvds>;
- gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usbh1_vbus: usb-h1-vbus {
compatible = "regulator-fixed";
- gpio = <&gpio3 31 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1_vbus>;
regulator-name = "usb_h1_vbus";
@@ -41,7 +41,7 @@ reg_usb_otg_switch: regulator-usb-otg-switch {
regulator-name = "usb_otg_switch";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio7 12 0>;
+ gpios = <&gpio7 12 0>;
regulator-boot-on;
regulator-always-on;
};
@@ -51,7 +51,7 @@ reg_usb_host1: regulator-usb-host1 {
regulator-name = "usb_host1_en";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 31 0>;
+ gpios = <&gpio3 31 0>;
enable-active-high;
};
@@ -16,7 +16,7 @@ reg_usb_otg_vbus: regulator-usbotgvbus {
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotgvbus>;
- gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -64,7 +64,7 @@ reg_usbh1_vbus: regulator-usbhubreset {
startup-delay-us = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1_hubreset>;
- gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
};
reg_usb_otg_vbus: regulator-usbotgvbus {
@@ -74,7 +74,7 @@ reg_usb_otg_vbus: regulator-usbotgvbus {
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotgvbus>;
- gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
@@ -96,7 +96,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -107,7 +107,7 @@ reg_hdmi: regulator-hdmi {
pinctrl-0 = <&pinctrl_h100_reg_hdmi>;
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
regulator-name = "V_HDMI";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -117,7 +117,7 @@ reg_hdmi: regulator-hdmi {
reg_usbh1_vbus: regulator-usb-h1-vbus {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_h100_usbh1_vbus>;
regulator-name = "USB_H1_VBUS";
@@ -128,7 +128,7 @@ reg_usbh1_vbus: regulator-usb-h1-vbus {
reg_usbotg_vbus: regulator-usb-otg-vbus {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_h100_usbotg_vbus>;
regulator-name = "USB_OTG_VBUS";
@@ -92,7 +92,7 @@ reg_3p3v: regulator-3p3v {
reg_audio: regulator-audio {
compatible = "regulator-fixed";
regulator-name = "sgtl5000-supply";
- gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
@@ -38,7 +38,7 @@ reg_lcd: regulator-lcd {
regulator-name = "lcd_panel_pwr";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <®_3v3>;
startup-delay-us = <500000>;
@@ -51,7 +51,7 @@ reg_lcd_reset: regulator-lcd-reset {
regulator-name = "nLCD_RESET";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <®_lcd>;
};
@@ -64,7 +64,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -63,7 +63,7 @@ reg_lvds: regulator-lvds {
regulator-boot-on;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_lvds>;
- gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -134,7 +134,7 @@ reg_audio_codec: regulator-audio-codec {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
startup-delay-us = <400000>;
- gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -144,7 +144,7 @@ reg_display: regulator-display {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <200000>;
- gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 28 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -153,7 +153,7 @@ reg_lvds_lcd: regulator-lvds-lcd {
regulator-name = "lcd-lvds-power";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -162,7 +162,7 @@ reg_pcie: regulator-pcie {
regulator-name = "pcie-bus-power";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
- gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -173,7 +173,7 @@ reg_sata: regulator-sata {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <10000>;
- gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 30 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -80,7 +80,7 @@ wlan_en_reg: regulator-wlan_en {
regulator-name = "wlan-en-regulator";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
@@ -90,7 +90,7 @@ reg_usb_otg_vbus: regulator-usb_vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&swbst_reg>;
};
@@ -77,7 +77,7 @@ reg_wifi: regulator-wifi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wifi_npd>;
enable-active-high;
- gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
regulator-max-microvolt = <1800000>;
regulator-min-microvolt = <1800000>;
regulator-name = "regulator-WL12xx";
@@ -102,7 +102,7 @@ reg_usb_h1_vbus: regulator-usbh1vbus {
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -111,7 +111,7 @@ reg_usb_otg_vbus: regulator-usbotgvbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -147,7 +147,7 @@ reg_ov5640_2v8_a_vdd: regulator-ov5640-2v8-a-vdd {
reg_usb_otg_vbus: regulator-usb-otg-vbus {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>;
regulator-max-microvolt = <5000000>;
@@ -160,7 +160,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>;
regulator-max-microvolt = <5000000>;
@@ -173,7 +173,7 @@ reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub {
reg_usb_host_vbus: regulator-usb-host-vbus {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
regulator-max-microvolt = <5000000>;
@@ -28,7 +28,7 @@ reg_3p3v: regulator-3p3v {
reg_usbh1_vbus: regulator-usbh1-vbus {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 31 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_aristainetos_usbh1_vbus>;
regulator-name = "usb_h1_vbus";
@@ -39,7 +39,7 @@ reg_usbh1_vbus: regulator-usbh1-vbus {
reg_usbotg_vbus: regulator-usbotg-vbus {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_aristainetos_usbotg_vbus>;
regulator-name = "usb_otg_vbus";
@@ -71,7 +71,7 @@ reg_3p3v: regulator-3p3v {
reg_usbh1_vbus: regulator-usbh1-vbus {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>;
regulator-name = "usb_h1_vbus";
@@ -82,7 +82,7 @@ reg_usbh1_vbus: regulator-usbh1-vbus {
reg_usbotg_vbus: regulator-usbotg-vbus {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>;
regulator-name = "usb_otg_vbus";
@@ -119,7 +119,7 @@ reg_module_3v3_audio: regulator-module-3v3-audio {
reg_usb_host_vbus: regulator-usb-host-vbus {
compatible = "regulator-fixed";
- gpio = <&gpio3 31 GPIO_ACTIVE_LOW>; /* SODIMM 129 / USBH_PEN */
+ gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; /* SODIMM 129 / USBH_PEN */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
regulator-max-microvolt = <5000000>;
@@ -79,7 +79,7 @@ v_5v0: regulator-v-5v0 {
v_usb2: regulator-v-usb2 {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>;
regulator-max-microvolt = <5000000>;
@@ -91,7 +91,7 @@ v_usb2: regulator-v-usb2 {
v_usb1: regulator-v-usb1 {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>;
regulator-max-microvolt = <5000000>;
@@ -12,7 +12,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 0>;
+ gpios = <&gpio3 22 0>;
enable-active-high;
};
@@ -42,7 +42,7 @@ reg_3p3v: regulator-3P3V {
reg_eth_vio: regulator-eth-vio {
compatible = "regulator-fixed";
- gpio = <&gpio1 7 0>;
+ gpios = <&gpio1 7 0>;
pinctrl-0 = <&pinctrl_enet_vio>;
pinctrl-names = "default";
regulator-always-on;
@@ -56,7 +56,7 @@ reg_eth_vio: regulator-eth-vio {
/* OE pin of the latch is low active */
reg_latch_oe_on: regulator-latch-oe-on {
compatible = "regulator-fixed";
- gpio = <&gpio3 22 0>;
+ gpios = <&gpio3 22 0>;
regulator-always-on;
regulator-name = "latch_oe_on";
};
@@ -64,7 +64,7 @@ reg_latch_oe_on: regulator-latch-oe-on {
reg_usb_h1_vbus: regulator-usb-h1-vbus {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio3 31 0>;
+ gpios = <&gpio3 31 0>;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-name = "usb_h1_vbus";
@@ -47,7 +47,7 @@ reg_usb_otg: reg-otgvbus {
regulator-name = "OTG_VBUS";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
regulator-always-on;
};
@@ -127,7 +127,7 @@ reg_parallel_disp: reg-parallel-display {
regulator-name = "LCD-Supply";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -136,7 +136,7 @@ reg_lvds_disp: reg-lvds-display {
regulator-name = "LVDS-Supply";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -119,7 +119,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -142,7 +142,7 @@ reg_can1_stby: regulator-can1-stby {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_can1>;
regulator-name = "can1_stby";
- gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
@@ -152,7 +152,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -134,7 +134,7 @@ reg_can1_stby: regulator-can1-stby {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_can1>;
regulator-name = "can1_stby";
- gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
@@ -152,7 +152,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -135,7 +135,7 @@ reg_can1_stby: regulator-can1-stby {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_can1>;
regulator-name = "can1_stby";
- gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
@@ -153,7 +153,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -153,7 +153,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -200,7 +200,7 @@ reg_12p0v: regulator-12p0v {
regulator-name = "12P0V";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
- gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -225,7 +225,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -164,7 +164,7 @@ reg_usb_h1_vbus: regulator-usb-h1-vbus {
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 30 0>;
+ gpios = <&gpio3 30 0>;
enable-active-high;
};
@@ -173,7 +173,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -182,7 +182,7 @@ reg_12p0: regulator-12p0v {
regulator-name = "12P0V";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
- gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -186,7 +186,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -119,7 +119,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -123,7 +123,7 @@ reg_wl: regulator-wl {
pinctrl-0 = <&pinctrl_reg_wl>;
compatible = "regulator-fixed";
regulator-name = "wl";
- gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
startup-delay-us = <100>;
enable-active-high;
regulator-min-microvolt = <3300000>;
@@ -82,7 +82,7 @@ v_5v0: regulator-v-5v0 {
v_sd: regulator-v-sd {
compatible = "regulator-fixed";
- gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_vmmc>;
regulator-boot-on;
@@ -96,7 +96,7 @@ v_sd: regulator-v-sd {
v_usb2: regulator-v-usb2 {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>;
regulator-max-microvolt = <5000000>;
@@ -108,7 +108,7 @@ v_usb2: regulator-v-usb2 {
v_usb1: regulator-v-usb1 {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>;
regulator-max-microvolt = <5000000>;
@@ -91,7 +91,7 @@ vcc_1p8: regulator-vcc-1p8 {
v_sd: regulator-v-sd {
compatible = "regulator-fixed";
- gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard2_vmmc>;
regulator-boot-on;
@@ -105,7 +105,7 @@ v_sd: regulator-v-sd {
v_usb1: regulator-v-usb1 {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard2_usbotg_vbus>;
regulator-always-on;
@@ -119,7 +119,7 @@ v_usb2: regulator-v-usb2 {
/* USB hub port 1 */
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard2_usbh1_vbus>;
regulator-always-on;
@@ -133,7 +133,7 @@ v_usb3: regulator-v-usb3 {
/* USB hub port 3 */
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard2_usbh2_vbus>;
regulator-always-on;
@@ -147,7 +147,7 @@ v_usb4: regulator-v-usb4 {
/* USB hub port 4 */
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard2_usbh3_vbus>;
regulator-always-on;
@@ -46,7 +46,7 @@ reg_sd3_vmmc: regulator-sd3-vmmc {
regulator-name = "P3V3_SD3_SWITCHED";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
enable-active-high;
};
@@ -68,7 +68,7 @@ reg_sdio: regulator-sdio {
regulator-name = "V_3V3_SD";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
enable-active-high;
off-on-delay-us = <20000>;
};
@@ -80,7 +80,7 @@ reg_smarc_lcdbklt: regulator-smarc-lcdbklt {
regulator-name = "LCD_BKLT_EN";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -91,7 +91,7 @@ reg_smarc_lcdvdd: regulator-smarc-lcdvdd {
regulator-name = "LCD_VDD_EN";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -92,7 +92,7 @@ reg_pcie: regulator-pcie {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
/* PCIE.PWR_EN */
- gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
vin-supply = <®_mba6_3p3v>;
@@ -36,7 +36,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -47,7 +47,7 @@ reg_wlan_vmmc: regulator-wlan-vmmc {
regulator-name = "reg_wlan_vmmc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
@@ -44,7 +44,7 @@ reg_usb_otg_vbus: regulator-usb-otg {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -55,7 +55,7 @@ reg_usb_h1_vbus: regulator-usb-h1-vbus {
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -66,7 +66,7 @@ reg_wlan_vmmc: regulator-wlan-vmmc {
regulator-name = "reg_wlan_vmmc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
@@ -78,7 +78,7 @@ reg_can_xcvr: regulator-can-xcvr {
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can_xcvr>;
- gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
};
gpio-keys {
@@ -175,7 +175,7 @@ reg_can_xcvr: regulator-can-xcvr {
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can_xcvr>;
- gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
};
reg_usb_h1_vbus: regulator-usb-h1-vbus {
@@ -185,7 +185,7 @@ reg_usb_h1_vbus: regulator-usb-h1-vbus {
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
@@ -195,7 +195,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -206,7 +206,7 @@ reg_wlan_vmmc: regulator-wlan-vmmc {
regulator-name = "reg_wlan_vmmc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
@@ -38,7 +38,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 0>;
+ gpios = <&gpio3 22 0>;
enable-active-high;
};
@@ -49,7 +49,7 @@ reg_can_xcvr: regulator-can-xcvr {
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can_xcvr>;
- gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
};
reg_wlan_vmmc: regulator-wlan-vmmc {
@@ -59,7 +59,7 @@ reg_wlan_vmmc: regulator-wlan-vmmc {
regulator-name = "reg_wlan_vmmc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
@@ -71,7 +71,7 @@ reg_usb_h1_vbus: regulator-usb-h1-vbus {
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -15,7 +15,7 @@ reg_wl_en: regulator-wl-en {
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wl>;
- gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
startup-delay-us = <100>;
status = "disabled";
@@ -58,7 +58,7 @@ reg_en_switch: regulator-en-switch {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
- gpio = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
regulator-always-on;
};
@@ -69,7 +69,7 @@ reg_flexcan1: regulator-flexcan1 {
regulator-name = "flexcan1-reg";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
- gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -88,7 +88,7 @@ reg_pcie: regulator-pcie {
regulator-name = "mPCIe_1V5";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
- gpio = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -99,7 +99,7 @@ reg_usb_h1_vbus: usb-h1-vbus {
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -110,7 +110,7 @@ reg_usbotg_vbus: usbotg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -19,7 +19,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 15 0>;
+ gpios = <&gpio4 15 0>;
enable-active-high;
};
@@ -30,7 +30,7 @@ reg_usb_h1_vbus: regulator-usb-h1-vbus {
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 0 0>;
+ gpios = <&gpio1 0 0>;
enable-active-high;
};
@@ -60,7 +60,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
};
codec_osc: clock {
@@ -97,7 +97,7 @@ reg_lcd_3v3: regulator-lcd-3v3 {
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -30,7 +30,7 @@ reg_usb_otg_vbus: regulator-otg-vbus {
regulator-name = "otg-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -27,7 +27,7 @@ reg_usbh1_vbus: regulator-usbh1-vbus {
regulator-name = "usbh1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -37,7 +37,7 @@ reg_usb_otg_vbus: regulator-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -89,7 +89,7 @@ reg_usb_h1_vbus: regulator-usb-h1-vbus {
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -98,7 +98,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&max7310_c 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -107,7 +107,7 @@ reg_can_en: regulator-can-en {
regulator-name = "can-en";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&max7310_b 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&max7310_b 6 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -116,7 +116,7 @@ reg_can_stby: regulator-can-stby {
regulator-name = "can-stby";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&max7310_b 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <®_can_en>;
};
@@ -45,7 +45,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 0>;
+ gpios = <&gpio3 22 0>;
enable-active-high;
};
@@ -56,7 +56,7 @@ reg_can_xcvr: regulator-can-xcvr {
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can_xcvr>;
- gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
};
reg_1p5v: regulator-1p5v {
@@ -90,7 +90,7 @@ reg_usb_h1_vbus: regulator-usb-h1-vbus {
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -22,7 +22,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&swbst_reg>;
};
@@ -32,7 +32,7 @@ reg_usb_h1_vbus: regulator-usb-h1-vbus {
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&swbst_reg>;
};
@@ -40,7 +40,7 @@ reg_usb_h1_vbus: regulator-usb-h1-vbus {
reg_audio: regulator-audio {
compatible = "regulator-fixed";
regulator-name = "wm8962-supply";
- gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -51,7 +51,7 @@ reg_pcie: regulator-pcie {
regulator-name = "MPCIE_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -62,7 +62,7 @@ reg_sensors: regulator-sensors {
regulator-name = "sensors-supply";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -141,7 +141,7 @@ reg_can1_stby: regulator-can1-stby {
regulator-name = "can1-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 31 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
};
reg_can2_stby: regulator-can2-stby {
@@ -151,7 +151,7 @@ reg_can2_stby: regulator-can2-stby {
regulator-name = "can2-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio4 11 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
};
reg_tft_vcom: regulator-tft-vcom {
@@ -174,7 +174,7 @@ reg_vcc_mmc: regulator-vcc-mmc {
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
startup-delay-us = <100>;
};
@@ -51,7 +51,7 @@ clk_brcm: brcm-clock {
reg_brcm: brcm-reg {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio3 19 0>;
+ gpios = <&gpio3 19 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_microsom_brcm_reg>;
regulator-name = "brcm_reg";
@@ -77,7 +77,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -100,7 +100,7 @@ reg_can1_3v3: reg_can1_3v3 {
regulator-name = "reg_can1_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -109,7 +109,7 @@ reg_can2_3v3: en-reg_can2_3v3 {
regulator-name = "reg_can2_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -118,7 +118,7 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -127,7 +127,7 @@ reg_wlan_vmmc: regulator_wlan_vmmc {
regulator-name = "wlan_vmmc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio8 14 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio8 14 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
@@ -108,7 +108,7 @@ reg_3v3_etn: regulator-3v3-etn {
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_etnphy_power>;
- gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -135,7 +135,7 @@ reg_can_xcvr: regulator-can-xcvr {
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan_xcvr>;
- gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
};
reg_lcd0_pwr: regulator-lcd0-pwr {
@@ -145,7 +145,7 @@ reg_lcd0_pwr: regulator-lcd0-pwr {
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd0_pwr>;
- gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
enable-active-high;
status = "disabled";
};
@@ -157,7 +157,7 @@ reg_lcd1_pwr: regulator-lcd1-pwr {
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd1_pwr>;
- gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
status = "disabled";
};
@@ -169,7 +169,7 @@ reg_usbh1_vbus: regulator-usbh1-vbus {
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1_vbus>;
- gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -180,7 +180,7 @@ reg_usbotg_vbus: regulator-usbotg-vbus {
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg_vbus>;
- gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -63,7 +63,7 @@ reg_panel: regulator-panel {
compatible = "regulator-fixed";
regulator-name = "lcd_panel";
enable-active-high;
- gpio = <&gpio1 2 0>;
+ gpios = <&gpio1 2 0>;
};
sound {
@@ -28,7 +28,7 @@ reg_wl18xx_vmmc: regulator-wl18xx {
regulator-name = "vwl1807";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
startup-delay-us = <70000>;
};
@@ -64,7 +64,7 @@ reg_wl18xx_vmmc: regulator-wl18xx {
regulator-name = "vwl1807";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
startup-delay-us = <70000>;
};
@@ -133,7 +133,7 @@ reg_otg_vbus: regulator-otg-vbus {
regulator-name = "otg-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -12,7 +12,7 @@ reg_eth_phy: regulator-eth-phy {
regulator-name = "ETH_PHY";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio7 13 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
};
};
@@ -85,7 +85,7 @@ reg_usb_otg_vbus: regulator-usbotgvbus {
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotgvbus>;
- gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
};
};
@@ -86,7 +86,7 @@ reg_3p3v_sd: regulator-3p3v-sd {
regulator-name = "3V3_SD";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
startup-delay-us = <1000>;
enable-active-high;
regulator-always-on;
@@ -103,7 +103,7 @@ reg_otg_vbus: regulator-otg-vbus {
regulator-name = "otg-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -45,7 +45,7 @@ reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&swbst_reg>;
};
@@ -55,7 +55,7 @@ reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
regulator-name = "usb_otg2_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&swbst_reg>;
};
@@ -81,7 +81,7 @@ reg_lcd_3v3: regulator-lcd-3v3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
regulator-name = "lcd-3v3";
- gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -74,7 +74,7 @@ reg_wifi: regulator-wifi {
regulator-name = "SD3_SPWR";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
};
wifi_pwrseq: wifi-pwrseq {
@@ -29,7 +29,7 @@ backlight_regulator: regulator-backlight {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_backlight_power>;
regulator-name = "backlight";
- gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -100,7 +100,7 @@ reg_wifi: regulator-wifi {
regulator-name = "SD3_SPWR";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
};
wifi_pwrseq: wifi_pwrseq {
@@ -35,7 +35,7 @@ backlight_regulator: regulator-backlight {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_backlight_power>;
regulator-name = "backlight";
- gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -104,7 +104,7 @@ reg_wifi: regulator-wifi {
regulator-name = "SD3_SPWR";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
};
@@ -51,7 +51,7 @@ reg_usb_otg1_vbus: regulator-otg1-vbus {
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -62,7 +62,7 @@ reg_usb_otg2_vbus: regulator-otg2-vbus {
regulator-name = "usb_otg2_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -87,7 +87,7 @@ reg_lcd_3v3: regulator-lcd-3v3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
regulator-name = "lcd-3v3";
- gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -105,7 +105,7 @@ reg_sd1_vmmc: regulator-sd1-vmmc {
regulator-name = "SD1_SPWR";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 30 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -124,7 +124,7 @@ reg_sd3_vmmc: regulator-sd3-vmmc {
regulator-name = "SD3_WIFI";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -45,7 +45,7 @@ reg_can1_3v3: regulator-can1-3v3 {
regulator-name = "can1-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
};
reg_can2_3v3: regulator-can2-3v3 {
@@ -53,7 +53,7 @@ reg_can2_3v3: regulator-can2-3v3 {
regulator-name = "can2-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio4 24 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
};
reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
@@ -63,7 +63,7 @@ reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -76,7 +76,7 @@ reg_wlan: regulator-wlan {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <70000>;
- gpio = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -34,7 +34,7 @@ vcc_sd3: regulator-vcc-sd3 {
regulator-name = "VCC_SD3";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -43,7 +43,7 @@ reg_can_wake: regulator-can-wake {
regulator-name = "can-wake";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -52,7 +52,7 @@ reg_can_en: regulator-can-en {
regulator-name = "can-en";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&max7310_b 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <®_can_wake>;
};
@@ -62,7 +62,7 @@ reg_can_stby: regulator-can-stby {
regulator-name = "can-stby";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&max7310_b 4 GPIO_ACTIVE_HIGH>;
+ gpios = <&max7310_b 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <®_can_en>;
};
@@ -146,12 +146,12 @@ flash1: flash@2 {
®_can_en {
/* Transceiver EN/STBY is active high on RevA board */
- gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
®_can_stby {
- gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <®_can_en>;
};
@@ -147,7 +147,7 @@ ®_vdd2p5 {
®_can_stby {
/* Transceiver EN/STBY is active low on RevB board */
- gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
};
&snvs_pwrkey {
@@ -55,7 +55,7 @@ vcc_sd3: regulator-vcc-sd3 {
regulator-name = "VCC_SD3";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -66,7 +66,7 @@ reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -77,7 +77,7 @@ reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
regulator-name = "usb_otg2_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -91,7 +91,7 @@ reg_psu_5v: regulator-psu-5v {
reg_lcd_3v3: regulator-lcd-3v3 {
compatible = "regulator-fixed";
regulator-name = "lcd-3v3";
- gpio = <&gpio3 27 0>;
+ gpios = <&gpio3 27 0>;
enable-active-high;
};
@@ -102,7 +102,7 @@ reg_peri_3v3: regulator-peri-3v3 {
regulator-name = "peri_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
@@ -114,7 +114,7 @@ reg_enet_3v3: regulator-enet-3v3 {
regulator-name = "enet_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
regulator-boot-on;
regulator-always-on;
};
@@ -126,7 +126,7 @@ reg_pcie_gpio: regulator-pcie-gpio {
regulator-name = "MPCIE_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -29,7 +29,7 @@ reg_usb_otg1_vbus: regulator-usb_otg1_vbus {
pinctrl-0 = <&pinctrl_usb_otg1>;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -31,7 +31,7 @@ led-orange {
reg_sdio_pwr: regulator-sdio-pwr {
compatible = "regulator-fixed";
- gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-name = "SDIO_PWR";
regulator-min-microvolt = <3300000>;
@@ -46,7 +46,7 @@ reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -57,7 +57,7 @@ reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
regulator-name = "usb_otg2_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -66,7 +66,7 @@ reg_wlan: regulator-wlan {
regulator-name = "wlan-en-regulator";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
@@ -28,7 +28,7 @@ reg_sd1_vmmc: regulator-sd1-vmmc {
regulator-name = "VSD_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -39,7 +39,7 @@ reg_peri_3v3: regulator-peri-3v3 {
regulator-name = "VPERI_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 2 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
/*
* If you want to want to make this dynamic please
* check schematics and test all affected peripherals:
@@ -41,7 +41,7 @@ reg_usb_otg1_vbus: regulator-usb-otg1 {
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -74,7 +74,7 @@ reg_usbotg1_vbus: regulator-usbotg1vbus {
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg1_vbus>;
- gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -85,7 +85,7 @@ reg_usbotg2_vbus: regulator-usbotg2vbus {
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg2_vbus>;
- gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -57,7 +57,7 @@ reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -61,7 +61,7 @@ reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio2 8 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
};
};
@@ -34,7 +34,7 @@ reg_backlight_en: regulator-backlight-en {
regulator-name = "backlight-lcd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -15,7 +15,7 @@ reg_wl_en: regulator-wl-en {
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wl>;
- gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
startup-delay-us = <100>;
status = "disabled";
@@ -36,7 +36,7 @@ reg_can1_en: regulator-can1 {
regulator-name = "Can";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
status = "disabled";
};
@@ -47,7 +47,7 @@ reg_sd1_vmmc: regulator-sd1-vmmc {
regulator-name = "VSD_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -58,13 +58,13 @@ reg_usb_otg_vbus: regulator-usb-otg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 6 0>;
+ gpios = <&gpio1 6 0>;
};
reg_brcm: regulator-brcm {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_brcm_reg>;
regulator-name = "brcm_reg";
@@ -145,7 +145,7 @@ reg_3v3_etn: regulator-3v3etn {
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_etnphy_power>;
- gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -172,7 +172,7 @@ reg_can_xcvr: regulator-canxcvr {
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan_xcvr>;
- gpio = <&gpio3 5 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
};
reg_lcd_pwr: regulator-lcdpwr {
@@ -182,7 +182,7 @@ reg_lcd_pwr: regulator-lcdpwr {
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd_pwr>;
- gpio = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
regulator-always-on;
@@ -195,7 +195,7 @@ reg_usbh1_vbus: regulator-usbh1vbus {
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1_vbus &pinctrl_usbh1_oc>;
- gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -206,7 +206,7 @@ reg_usbotg_vbus: regulator-usbotgvbus {
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg_vbus &pinctrl_usbotg_oc>;
- gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -43,7 +43,7 @@ reg_usbh_vbus: regulator-usbh-vbus {
regulator-name = "VCC_USB[1-4]";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
vin-supply = <®_5v0>;
};
};
@@ -36,7 +36,7 @@ reg_usbh_vbus: regulator-usbh-vbus {
regulator-name = "VCC_USB[1-4]";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
vin-supply = <®_5v0>;
};
};
@@ -11,7 +11,7 @@ reg_3v3_vmmc: regulator-3v3-vmmc {
regulator-name = "3v3_vmmc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
startup-delay-us = <100>;
enable-active-high;
};
@@ -43,7 +43,7 @@ reg_usbh_vbus: regulator-usbh-vbus {
regulator-name = "VCC_USB[1-4]";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
vin-supply = <®_5v0>;
};
};
@@ -45,7 +45,7 @@ reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
compatible = "regulator-fixed";
- gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
regulator-max-microvolt = <5000000>;
regulator-min-microvolt = <5000000>;
regulator-name = "usb-otg2-vbus";
@@ -100,7 +100,7 @@ reg_vbus: regulator-vbus {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <®_5v0>;
- gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -41,7 +41,7 @@ reg_s25fl064_hold: regulator-s25fl064-hold {
regulator-name = "s25fl064_hold";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
@@ -53,7 +53,7 @@ reg_usb_hub_vbus: regulator-hub-otg1-vbus {
regulator-name = "usb_hub_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
@@ -65,7 +65,7 @@ reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
@@ -25,7 +25,7 @@ reg_fan: regulator {
pinctrl-0 = <&pinctrl_fan_enable>;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
- gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
@@ -25,7 +25,7 @@ reg_fan: regulator {
pinctrl-0 = <&pinctrl_fan_enable>;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
- gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
@@ -7,7 +7,7 @@ / {
reg_3v3_vmmc: regulator-3v3-vmmc {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* SODIMM 100 */
+ gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* SODIMM 100 */
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "3v3_vmmc";
@@ -106,7 +106,7 @@ reg_module_3v3_eth: regulator-module-3v3-eth {
reg_usbh_vbus: regulator-usbh-vbus {
compatible = "regulator-fixed";
- gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; /* SODIMM 129 / USBH_PEN */
+ gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* SODIMM 129 / USBH_PEN */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh_reg>;
regulator-max-microvolt = <5000000>;
@@ -101,7 +101,7 @@ reg_fec1_pwdn: regulator-fec1-pwdn {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
- gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -111,7 +111,7 @@ reg_fec2_pwdn: regulator-fec2-pwdn {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
- gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -120,7 +120,7 @@ reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
regulator-name = "VBUS_USBOTG1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -129,7 +129,7 @@ reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
regulator-name = "VBUS_USBOTG2";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -138,7 +138,7 @@ reg_mpcie_1v5: regulator-mpcie-1v5 {
regulator-name = "VCC1V5_MPCIE";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
- gpio = <&pca9555 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&pca9555 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
@@ -148,7 +148,7 @@ reg_mpcie_3v3: regulator-mpcie-3v3 {
regulator-name = "VCC3V3_MPCIE";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&pca9555 10 GPIO_ACTIVE_HIGH>;
+ gpios = <&pca9555 10 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
@@ -158,7 +158,7 @@ reg_mba_12v0: regulator-mba-12v0 {
regulator-name = "VCC12V0_MBA7";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
- gpio = <&pca9555 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&pca9555 11 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -167,7 +167,7 @@ reg_lvds_transmitter: regulator-lvds-transmitter {
regulator-name = "#SHTDN_LVDS";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&pca9555 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&pca9555 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -28,7 +28,7 @@ reg_usb_otg1_vbus: regulator-vbus {
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -28,7 +28,7 @@ reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
regulator-name = "VBUS_USBOTG2";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -28,7 +28,7 @@ reg_wlreg_on: regulator-wlreg-on {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <100>;
- gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
@@ -53,7 +53,7 @@ reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
regulator-name = "usb_otg2_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -48,7 +48,7 @@ reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -57,7 +57,7 @@ reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
regulator-name = "usb_otg2_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -66,7 +66,7 @@ reg_can2_3v3: regulator-can2-3v3 {
regulator-name = "can2-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
};
reg_vref_1v8: regulator-vref-1v8 {
@@ -89,7 +89,7 @@ reg_wlan: regulator-wlan {
regulator-max-microvolt = <3300000>;
regulator-name = "reg_wlan";
startup-delay-us = <70000>;
- gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -39,7 +39,7 @@ reg_lcd_3v3: regulator-lcd-3v3 {
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -50,7 +50,7 @@ reg_wlreg_on: regulator-wlreg_on {
regulator-name = "wlreg_on";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -77,7 +77,7 @@ reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio4 5 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
};
reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
@@ -52,7 +52,7 @@ reg_brcm: regulator-brcm {
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_brcm_reg>;
- gpio = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
enable-active-high;
startup-delay-us = <150>;
};
@@ -65,7 +65,7 @@ reg_digitizer: regulator-digitizer {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&pinctrl_digitizer_reg>;
pinctrl-1 = <&pinctrl_digitizer_reg>;
- gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
enable-active-high;
startup-delay-us = <100000>; /* 100 ms */
};
@@ -77,7 +77,7 @@ reg_touch: regulator-touch {
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_touch_reg>;
- gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -12,7 +12,7 @@ / {
reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg_reva>;
- gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>;
};
};
@@ -70,7 +70,7 @@ reg_sd1_vmmc: regulator-sd1-vmmc {
regulator-name = "VDD_SD1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
startup-delay-us = <200000>;
off-on-delay-us = <20000>;
@@ -81,7 +81,7 @@ reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -92,7 +92,7 @@ reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg>;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -105,7 +105,7 @@ reg_vref_1v8: regulator-vref-1v8 {
reg_brcm: regulator-brcm {
compatible = "regulator-fixed";
- gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-name = "brcm_reg";
pinctrl-names = "default";
@@ -120,7 +120,7 @@ reg_lcd_3v3: regulator-lcd-3v3 {
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&extended_io 7 GPIO_ACTIVE_LOW>;
+ gpios = <&extended_io 7 GPIO_ACTIVE_LOW>;
};
reg_can2_3v3: regulator-can2-3v3 {
@@ -130,7 +130,7 @@ reg_can2_3v3: regulator-can2-3v3 {
pinctrl-0 = <&pinctrl_flexcan2_reg>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
};
reg_fec2_3v3: regulator-fec2-3v3 {
@@ -140,7 +140,7 @@ reg_fec2_3v3: regulator-fec2-3v3 {
pinctrl-0 = <&pinctrl_enet2_reg>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
backlight: backlight {
@@ -38,7 +38,7 @@ reg_lte_on: regulator-lte-on {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "lte_on";
- gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
@@ -50,14 +50,14 @@ reg_lte_nreset: regulator-lte-nreset {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "LTE_nReset";
- gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
reg_wifi: regulator-wifi {
compatible = "regulator-fixed";
- gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wifi>;
@@ -73,7 +73,7 @@ reg_wlan_rfkill: regulator-wlan-rfkill {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "wlan_rfkill";
- gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
@@ -85,7 +85,7 @@ reg_usbotg_vbus: regulator-usbotg-vbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 05 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 05 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -56,7 +56,7 @@ reg_can1_stby: regulator-can1-stby {
regulator-name = "can1-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -67,7 +67,7 @@ reg_can2_stby: regulator-can2-stby {
regulator-name = "can2-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -34,7 +34,7 @@ back {
reg_brcm: regulator-brcm {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_brcm_reg>;
regulator-name = "brcm_reg";
@@ -48,7 +48,7 @@ reg_bt: regulator-bt {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_bt_reg>;
enable-active-high;
- gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
regulator-name = "bt_reg";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -37,7 +37,7 @@ reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio_ptc 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio_ptc 0 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -48,7 +48,7 @@ reg_vsd_3v3: regulator-vsd-3v3 {
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc0_rst>;
- gpio = <&gpio_ptd 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio_ptd 0 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -84,7 +84,7 @@ led2 {
reg_lcd_pwr: regulator-lcd-pwr {
compatible = "regulator-fixed";
regulator-name = "lcd-pwr";
- gpio = <&expander_out0 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&expander_out0 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
status = "disabled";
};
@@ -110,7 +110,7 @@ reg_mpcie: regulator-mpcie-3v3 {
regulator-name = "mpcie-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&expander_out0 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&expander_out0 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
startup-delay-us = <500000>;
@@ -119,7 +119,7 @@ reg_mpcie: regulator-mpcie-3v3 {
reg_otg2vbus_5v0: regulator-otg2-vbus-5v0 {
compatible = "regulator-fixed";
- gpio = <&expander_out1 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&expander_out1 0 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-name = "otg2-vbus-supply-5v0";
regulator-min-microvolt = <5000000>;
@@ -48,7 +48,7 @@ reg_backlight: regulator-backlight {
regulator-name = "backlight";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio 5 4 0>;
+ gpios = <&gpio 5 4 0>;
enable-active-high;
regulator-boot-on;
};
@@ -58,7 +58,7 @@ reg_lcd: regulator-lcd {
regulator-name = "lcd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio 5 0 0>;
+ gpios = <&gpio 5 0 0>;
enable-active-high;
regulator-boot-on;
};
@@ -68,7 +68,7 @@ reg_sd: regulator-sd {
regulator-name = "sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio 5 5 0>;
+ gpios = <&gpio 5 5 0>;
enable-active-high;
regulator-boot-on;
};
@@ -19,7 +19,7 @@ reg_vddio_sd0: regulator-vddio-sd0 {
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 29 0>;
+ gpios = <&gpio1 29 0>;
};
reg_lcd_3v3: regulator-lcd-3v3 {
@@ -27,7 +27,7 @@ reg_lcd_3v3: regulator-lcd-3v3 {
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 18 0>;
+ gpios = <&gpio1 18 0>;
enable-active-high;
};
@@ -108,7 +108,7 @@ reg_usb0_vbus: regulator-0 {
regulator-max-microvolt = <5000000>;
enable-active-high;
startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */
- gpio = <&gpio0 17 0>;
+ gpios = <&gpio0 17 0>;
};
leds {
@@ -135,7 +135,7 @@ reg_vddio_sd0: regulator-vddio-sd0 {
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio0 8 0>;
+ gpios = <&gpio0 8 0>;
};
reg_vddio_sd1: regulator-vddio-sd1 {
@@ -143,7 +143,7 @@ reg_vddio_sd1: regulator-vddio-sd1 {
regulator-name = "vddio-sd1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 29 0>;
+ gpios = <&gpio1 29 0>;
};
reg_vdd_touchpad: regulator-vdd-touchpad0 {
@@ -151,7 +151,7 @@ reg_vdd_touchpad: regulator-vdd-touchpad0 {
regulator-name = "vdd-touchpad0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio0 26 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
regulator-always-on;
};
@@ -160,7 +160,7 @@ reg_vdd_tuner: regulator-vdd-tuner0 {
regulator-name = "vdd-tuner0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio0 29 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
regulator-always-on;
};
@@ -64,6 +64,6 @@ reg_vddio_sd0: regulator-0 {
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 29 0>;
+ gpios = <&gpio1 29 0>;
};
};
@@ -148,7 +148,7 @@ reg_vddio_sd0: regulator-vddio-sd0 {
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio0 7 0>;
+ gpios = <&gpio0 7 0>;
};
backlight {
@@ -15,7 +15,7 @@ reg_usb0_vbus: regulator-0 {
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 23 1>;
+ gpios = <&gpio1 23 1>;
enable-active-high;
};
@@ -34,7 +34,7 @@ reg_vddio_sd0: vddio-sd0 {
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 28 0>;
+ gpios = <&gpio3 28 0>;
};
};
@@ -71,6 +71,6 @@ reg_usb1_vbus: regulator-0 {
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio0 7 1>;
+ gpios = <&gpio0 7 1>;
};
};
@@ -85,7 +85,7 @@ reg_usb1_vbus: regulator-0 {
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio0 7 1>;
+ gpios = <&gpio0 7 1>;
};
spi-2 {
@@ -21,7 +21,7 @@ reg_usb1_vbus: regulator-0 {
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio0 7 1>;
+ gpios = <&gpio0 7 1>;
};
backlight {
@@ -21,7 +21,7 @@ reg_usb1_vbus: regulator-0 {
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio0 7 1>;
+ gpios = <&gpio0 7 1>;
};
backlight {
@@ -84,7 +84,7 @@ reg_lcd_3v3: regulator-1 {
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 30 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -95,7 +95,7 @@ reg_usb0_vbus: regulator-2 {
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -106,7 +106,7 @@ reg_usb1_vbus: regulator-3 {
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -28,7 +28,7 @@ reg_vddio_sd0: regulator-vddio-sd0 {
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 28 0>;
+ gpios = <&gpio3 28 0>;
};
reg_fec_3v3: regulator-fec-3v3 {
@@ -36,7 +36,7 @@ reg_fec_3v3: regulator-fec-3v3 {
regulator-name = "fec-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 15 0>;
+ gpios = <&gpio2 15 0>;
};
reg_usb0_vbus: regulator-usb0-vbus {
@@ -44,7 +44,7 @@ reg_usb0_vbus: regulator-usb0-vbus {
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 9 0>;
+ gpios = <&gpio3 9 0>;
enable-active-high;
};
@@ -53,7 +53,7 @@ reg_usb1_vbus: regulator-usb1-vbus {
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 8 0>;
+ gpios = <&gpio3 8 0>;
enable-active-high;
};
@@ -62,7 +62,7 @@ reg_lcd_3v3: regulator-lcd-3v3 {
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 30 0>;
+ gpios = <&gpio3 30 0>;
enable-active-high;
};
@@ -71,7 +71,7 @@ reg_can_3v3: regulator-can-3v3 {
regulator-name = "can-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 13 0>;
+ gpios = <&gpio2 13 0>;
enable-active-high;
};
@@ -53,7 +53,7 @@ reg_vddio_sd0: regulator-1 {
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 29 0>;
+ gpios = <&gpio3 29 0>;
};
reg_vddio_sd1: regulator-2 {
@@ -61,7 +61,7 @@ reg_vddio_sd1: regulator-2 {
regulator-name = "vddio-sd1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 19 0>;
+ gpios = <&gpio2 19 0>;
};
reg_usb1_vbus: regulator-3 {
@@ -69,7 +69,7 @@ reg_usb1_vbus: regulator-3 {
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 8 0>;
+ gpios = <&gpio3 8 0>;
enable-active-high;
};
};
@@ -23,7 +23,7 @@ reg_vddio_sd0: regulator-1 {
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 28 0>;
+ gpios = <&gpio3 28 0>;
};
reg_usb0_vbus: regulator-2 {
@@ -31,7 +31,7 @@ reg_usb0_vbus: regulator-2 {
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 12 0>;
+ gpios = <&gpio3 12 0>;
};
reg_usb1_vbus: regulator-3 {
@@ -39,7 +39,7 @@ reg_usb1_vbus: regulator-3 {
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 13 0>;
+ gpios = <&gpio3 13 0>;
};
sound {
@@ -20,7 +20,7 @@ reg_usb0_vbus: regulator-0 {
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 9 0>;
+ gpios = <&gpio3 9 0>;
};
leds {
@@ -24,7 +24,7 @@ reg_vddio_sd0: regulator-vddio-sd0 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
- gpio = <&gpio3 28 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
};
};
@@ -45,7 +45,7 @@ reg_usb0_vbus: regulator-usb0-vbus {
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -54,7 +54,7 @@ reg_usb1_vbus: regulator-usb1-vbus {
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -79,7 +79,7 @@ reg_can_xcvr: regulator-can-xcvr {
regulator-name = "CAN XCVR";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&tx28_flexcan_xcvr_pins>;
};
@@ -89,7 +89,7 @@ reg_lcd: regulator-lcd-power {
regulator-name = "LCD POWER";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -98,7 +98,7 @@ reg_lcd_reset: regulator-lcd-reset {
regulator-name = "LCD RESET";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 30 GPIO_ACTIVE_HIGH>;
startup-delay-us = <300000>;
enable-active-high;
regulator-always-on;
@@ -83,11 +83,11 @@ MX28_PAD_GPMI_D07__GPIO_0_7
};
®_fec_3v3 {
- gpio = <&gpio0 0 0>;
+ gpios = <&gpio0 0 0>;
};
®_usb_5v {
- gpio = <&gpio0 2 0>;
+ gpios = <&gpio0 2 0>;
};
&spi2_pins_a {
@@ -46,7 +46,7 @@ reg_usbh_vbus: regulator-usbh-vbus {
regulator-name = "VCC_USB[1-4]";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; /* USBH_PEN resp. USBH_P_EN */
+ gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; /* USBH_PEN resp. USBH_P_EN */
vin-supply = <®_5v0>;
};
};
@@ -82,7 +82,7 @@ usb0_vbus: regulator-usb0-vbus {
enable-active-high;
regulator-always-on;
regulator-boot-on;
- gpio = <&gpio0 6 0>;
+ gpios = <&gpio0 6 0>;
};
supply-voltage-monitor {
@@ -56,7 +56,7 @@ key-volume-up {
vddio_disp_vreg: regulator-vddio-disp {
compatible = "regulator-fixed";
regulator-name = "vddio_disp";
- gpio = <&tlmm 34 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
vin-supply = <&pm8226_l8>;
startup-delay-us = <300>;
enable-active-high;
@@ -51,7 +51,7 @@ vreg_wlan: wlan-regulator {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
- gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
@@ -57,7 +57,7 @@ vreg_wlan: wlan-regulator {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
- gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
@@ -51,7 +51,7 @@ vreg_wlan: wlan-regulator {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
- gpio = <&tlmm 46 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
@@ -18,7 +18,7 @@ reg_tsp_3p3v: regulator-tsp-3p3v {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 73 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
@@ -140,7 +140,7 @@ reg_backlight_vddio: regulator-backlight-vddio {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 74 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&backlight_vddio_default_state>;
@@ -153,7 +153,7 @@ reg_tsp_1p8v: regulator-tsp-1p8v {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&tlmm 114 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&tsp_en1_default_state>;
@@ -166,7 +166,7 @@ reg_tsp_3p3v: regulator-tsp-3p3v {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&tsp_en_default_state>;
@@ -36,7 +36,7 @@ dragon_veth: xc622a331mrg {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vph>;
- gpio = <&pm8058_gpio 40 GPIO_ACTIVE_HIGH>;
+ gpios = <&pm8058_gpio 40 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&dragon_veth_gpios>;
@@ -41,7 +41,7 @@ ext_3p3v: regulator-ext-3p3v {
regulator-max-microvolt = <3300000>;
regulator-name = "ext_3p3v";
startup-delay-us = <0>;
- gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
@@ -62,7 +62,7 @@ ext_3p3v: regulator-ext-3p3v {
regulator-max-microvolt = <3300000>;
regulator-name = "ext_3p3v";
startup-delay-us = <0>;
- gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
@@ -60,7 +60,7 @@ vreg_boost: vreg-boost {
regulator-always-on;
regulator-boot-on;
- gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ gpios = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
@@ -128,7 +128,7 @@ reg_tsp_1p8v: regulator-tsp-1p8v {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
@@ -72,7 +72,7 @@ reg_motor_vdd: regulator-motor-vdd {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&tlmm 111 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 111 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&motor_en_default>;
@@ -85,7 +85,7 @@ reg_vdd_tsp_a: regulator-vdd-tsp-a {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&tsp_en_default>;
@@ -58,7 +58,7 @@ key-volume-up {
vddio_disp_vreg: regulator-vddio-disp {
compatible = "regulator-fixed";
regulator-name = "vddio_disp";
- gpio = <&tlmm 34 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
startup-delay-us = <300>;
enable-active-high;
regulator-boot-on;
@@ -19,7 +19,7 @@ reg_tsp_3p3v: regulator-tsp-3p3v {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
@@ -19,7 +19,7 @@ chosen {
ext_l2: gpio-regulator {
compatible = "regulator-fixed";
regulator-name = "ext_l2";
- gpio = <&msmgpio 91 0>;
+ gpios = <&msmgpio 91 0>;
startup-delay-us = <10000>;
enable-active-high;
};
@@ -70,7 +70,7 @@ vreg_boost: vreg-boost {
regulator-always-on;
regulator-boot-on;
- gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ gpios = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
@@ -94,7 +94,7 @@ vreg_wlan: wlan-regulator {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
@@ -54,7 +54,7 @@ touch_ldo: regulator-touch {
compatible = "regulator-fixed";
regulator-name = "touch-ldo";
- gpio = <&pm8941_gpios 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&pm8941_gpios 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
@@ -76,7 +76,7 @@ vreg_boost: vreg-boost {
regulator-always-on;
regulator-boot-on;
- gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ gpios = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
@@ -68,7 +68,7 @@ vreg_boost: vreg-boost {
regulator-always-on;
regulator-boot-on;
- gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ gpios = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
@@ -46,7 +46,7 @@ vreg_boost: vreg-boost {
regulator-always-on;
regulator-boot-on;
- gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ gpios = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&boost_bypass_n_pin>;
@@ -62,7 +62,7 @@ vreg_boost: vreg-boost {
regulator-always-on;
regulator-boot-on;
- gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ gpios = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
@@ -133,7 +133,7 @@ vreg_wlan: wlan-regulator {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio_expander 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -147,7 +147,7 @@ vreg_panel: panel-regulator {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
- gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>;
+ gpios = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -12,7 +12,7 @@ vreg_bl_vddio: lcd-backlight-vddio {
regulator-min-microvolt = <3150000>;
regulator-max-microvolt = <3150000>;
- gpio = <&tlmm 69 0>;
+ gpios = <&tlmm 69 0>;
enable-active-high;
vin-supply = <&pm8941_s3>;
@@ -45,7 +45,7 @@ vreg_vsp: lcd-dcdc-regulator {
regulator-min-microvolt = <5600000>;
regulator-max-microvolt = <5600000>;
- gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
+ gpios = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&lcd_dcdc_en_pin_a>;
@@ -62,7 +62,7 @@ vreg_boost: vreg-boost {
regulator-always-on;
regulator-boot-on;
- gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ gpios = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
@@ -86,7 +86,7 @@ vreg_wlan: wlan-regulator {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
+ gpios = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&wlan_regulator_pin>;
@@ -122,7 +122,7 @@ vcc_3v3_tft1: regulator-panel {
regulator-max-microvolt = <3300000>;
enable-active-high;
startup-delay-us = <500>;
- gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 25 GPIO_ACTIVE_HIGH>;
};
vcc_sdhi1: regulator-vcc-sdhi1 {
@@ -132,7 +132,7 @@ vcc_sdhi1: regulator-vcc-sdhi1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 16 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
};
vccq_sdhi1: regulator-vccq-sdhi1 {
@@ -48,7 +48,7 @@ vcc_sdhi0: regulator-sdhi0 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&pfc 76 GPIO_ACTIVE_HIGH>;
+ gpios = <&pfc 76 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -46,7 +46,7 @@ vcc_sdhi0: regulator-vcc-sdhi0 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&pfc 75 GPIO_ACTIVE_HIGH>;
+ gpios = <&pfc 75 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -139,7 +139,7 @@ vcc_3v3_tft1: regulator-panel {
regulator-max-microvolt = <3300000>;
enable-active-high;
startup-delay-us = <500>;
- gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 28 GPIO_ACTIVE_HIGH>;
};
vcc_sdhi2: regulator-vcc-sdhi2 {
@@ -149,7 +149,7 @@ vcc_sdhi2: regulator-vcc-sdhi2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
};
vccq_sdhi2: regulator-vccq-sdhi2 {
@@ -77,7 +77,7 @@ vccq_panel: regulator-vccq-panel {
regulator-name = "Panel VccQ";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
enable-active-high;
};
@@ -147,7 +147,7 @@ vcc_sdhi0: regulator-vcc-sdhi0 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -170,7 +170,7 @@ vcc_sdhi2: regulator-vcc-sdhi2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -69,7 +69,7 @@ vcc_sdhi0: regulator-vcc-sdhi0 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -199,7 +199,7 @@ vcc_sdhi0: regulator-vcc-sdhi0 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 17 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -222,7 +222,7 @@ vcc_sdhi1: regulator-vcc-sdhi1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 18 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -245,7 +245,7 @@ vcc_sdhi2: regulator-vcc-sdhi2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -177,7 +177,7 @@ vcc_sdhi0: regulator-vcc-sdhi0 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio11 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -73,7 +73,7 @@ vcc_sdhi0: regulator-vcc-sdhi0 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio11 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -190,7 +190,7 @@ vcc_sdhi0: regulator-vcc-sdhi0 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 17 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -213,7 +213,7 @@ vcc_sdhi1: regulator-vcc-sdhi1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 18 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -236,7 +236,7 @@ vcc_sdhi2: regulator-vcc-sdhi2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -51,7 +51,7 @@ vcc_sdhi0: regulator-vcc-sdhi0 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -74,7 +74,7 @@ vcc_sdhi1: regulator-vcc-sdhi1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -127,7 +127,7 @@ vcc_sdhi1: regulator-vcc-sdhi1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -65,7 +65,7 @@ vmmc_sdhi0: regulator-vmmc-sdhi0 {
regulator-name = "SDHI0 Vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
+ gpios = <&pfc 15 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -74,7 +74,7 @@ vmmc_sdhi2: regulator-vmmc-sdhi2 {
regulator-name = "SDHI2 Vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
+ gpios = <&pfc 14 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -39,7 +39,7 @@ vcc_sd0: fixed-regulator {
regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
@@ -36,7 +36,7 @@ vcc_sd0: sdmmc-regulator {
regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
@@ -78,7 +78,7 @@ vcc_io: vcc-io {
vcc_host: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&host_drv>;
pinctrl-names = "default";
regulator-always-on;
@@ -92,7 +92,7 @@ vcc_host: usb-host-regulator {
vcc_otg: usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&otg_drv>;
pinctrl-names = "default";
regulator-always-on;
@@ -105,7 +105,7 @@ vcc_otg: usb-otg-regulator {
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&sdmmc_pwr>;
pinctrl-names = "default";
regulator-name = "vcc_sd";
@@ -118,7 +118,7 @@ vcc_sd: sdmmc-regulator {
vcc_wifi: sdio-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio3 RK_PD0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&wifi_pwr>;
pinctrl-names = "default";
regulator-name = "vcc_wifi";
@@ -84,7 +84,7 @@ vcc_emmc: emmc-regulator {
vcc_sata: sata-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&sata_pwr>;
regulator-name = "usb_5v";
@@ -96,7 +96,7 @@ vcc_sata: sata-regulator {
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
@@ -109,7 +109,7 @@ vcc_sd: sdmmc-regulator {
vcc_host: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_drv>;
regulator-name = "host-pwr";
@@ -122,7 +122,7 @@ vcc_host: usb-host-regulator {
vcc_otg: usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_drv>;
regulator-name = "vcc_otg";
@@ -26,7 +26,7 @@ memory@60000000 {
vcc5v0_otg: vcc5v0-otg-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc5v0_otg";
@@ -36,7 +36,7 @@ vcc5v0_otg: vcc5v0-otg-regulator {
vcc5v0_host: vcc5v0-host-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc5v0_host";
@@ -64,7 +64,7 @@ hdmi_connector_in: endpoint {
*/
host_pwr_5v: host-pwr-5v-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
startup-delay-us = <1500>;
regulator-name = "HOST_PWR_5V";
regulator-min-microvolt = <5000000>;
@@ -153,7 +153,7 @@ vcc_lan: vcc-lan-regulator {
vcc_sd: vcc-sd-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
startup-delay-us = <500>;
regulator-name = "VCC_SD";
regulator-min-microvolt = <3300000>;
@@ -135,7 +135,7 @@ avdd_cif: cif-avdd-regulator {
regulator-name = "avdd-cif";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&cif_avdd_en>;
startup-delay-us = <100000>;
@@ -148,7 +148,7 @@ vcc_5v: vcc-5v-regulator {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&v5_drv>;
vin-supply = <&vsys>;
@@ -157,7 +157,7 @@ vcc_5v: vcc-5v-regulator {
vcc_lcd: lcd-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc-lcd";
- gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_en>;
startup-delay-us = <50000>;
@@ -170,7 +170,7 @@ vcc_otg: usb-otg-regulator {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_drv>;
startup-delay-us = <100000>;
@@ -182,7 +182,7 @@ vcc_sd: sdmmc-regulator {
regulator-name = "vcc-sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
startup-delay-us = <100000>;
@@ -81,7 +81,7 @@ ir_recv: ir-receiver {
vcc_otg: usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "otg-vbus";
@@ -96,7 +96,7 @@ vcc_sd0: sdmmc-regulator {
regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
startup-delay-us = <100000>;
@@ -106,7 +106,7 @@ vcc_sd0: sdmmc-regulator {
vcc_host: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "host-pwr";
@@ -37,7 +37,7 @@ ext_gmac: ext_gmac {
vcc_host: vcc-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host";
@@ -54,7 +54,7 @@ sdio_pwrseq: sdio-pwrseq {
vcc_host: vcc-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host";
@@ -10,7 +10,7 @@ / {
vcc_lcd: vcc-lcd {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio7 RK_PA3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 RK_PA3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_en>;
regulator-name = "vcc_lcd";
@@ -20,7 +20,7 @@ vcc_lcd: vcc-lcd {
vcc_wl: vcc-wl {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio7 RK_PB1 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 RK_PB1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&wifi_pwr>;
regulator-name = "vcc_wl";
@@ -132,7 +132,7 @@ key-power {
vcc_host: vcc-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host";
@@ -143,7 +143,7 @@ vcc_host: vcc-host-regulator {
vcc_phy: vcc-phy-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <ð_phy_pwr>;
regulator-name = "vcc_phy";
@@ -169,7 +169,7 @@ vcc_sys: vsys-regulator {
*/
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
@@ -88,7 +88,7 @@ spdif_out: spdif-out {
vcc_host_5v: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host_5v";
@@ -109,7 +109,7 @@ vcc_5v: vcc_sys: vsys-regulator {
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
@@ -122,7 +122,7 @@ vcc_sd: sdmmc-regulator {
vcc_otg_5v: usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc_otg_5v";
@@ -135,7 +135,7 @@ vcc_otg_5v: usb-otg-regulator {
dovdd_1v8: dovdd-1v8-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>;
regulator-name = "dovdd_1v8";
@@ -147,7 +147,7 @@ dovdd_1v8: dovdd-1v8-regulator {
vcc28_dvp: vcc28-dvp-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>;
regulator-name = "vcc28_dvp";
@@ -159,7 +159,7 @@ vcc28_dvp: vcc28-dvp-regulator {
af_28: af_28-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>;
regulator-name = "af_28";
@@ -171,7 +171,7 @@ af_28: af_28-regulator {
dvdd_1v2: af_28-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cif_pwr>;
regulator-name = "dvdd_1v2";
@@ -90,7 +90,7 @@ vbat_wl: vcc_sys: vsys-regulator {
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
@@ -121,7 +121,7 @@ vcc_5v: usb-regulator {
vcc_host_5v: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host_5v";
@@ -134,7 +134,7 @@ vcc_host_5v: usb-host-regulator {
vcc_otg_5v: usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc_otg_5v";
@@ -151,7 +151,7 @@ vcc_otg_5v: usb-otg-regulator {
vcc28_dvp: vcc28-dvp-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>;
regulator-name = "vcc28_dvp";
@@ -48,7 +48,7 @@ vcc_flash: flash-regulator {
vcc_host: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host";
@@ -60,7 +60,7 @@ vcc_host: usb-host-regulator {
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
@@ -37,7 +37,7 @@ button-1 {
vcc_host0_5v: usb-host0-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host0_vbus_drv>;
regulator-name = "vcc_host0_5v";
@@ -49,7 +49,7 @@ vcc_host0_5v: usb-host0-regulator {
vcc_host1_5v: usb-host1-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host1_vbus_drv>;
regulator-name = "vcc_host1_5v";
@@ -61,7 +61,7 @@ vcc_host1_5v: usb-host1-regulator {
vcc_otg_5v: usb-otg-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc_otg_5v";
@@ -57,7 +57,7 @@ vcc_flash: flash-regulator {
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
@@ -91,7 +91,7 @@ vcc18_dvp: vcc18-dvp-regulator {
vcc28_dvp: vcc28-dvp-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&dvp_pwr>;
regulator-name = "vcc28_dvp";
@@ -51,7 +51,7 @@ ir: ir-receiver {
vcc_host: vcc-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host";
@@ -62,7 +62,7 @@ vcc_host: vcc-host-regulator {
vcc_otg: vcc-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc_otg";
@@ -75,7 +75,7 @@ vcc_sdmmc: sdmmc-regulator {
regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
@@ -73,7 +73,7 @@ simple-audio-card,dai-link@1 { /* S/PDIF - S/PDIF */
sata_pwr: sata-prw-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&sata_pwr_en>;
/* Always turn on the 5V sata power connector */
@@ -111,7 +111,7 @@ sdio_pwrseq: sdio-pwrseq {
vcc_usb_host: vcc-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc_host";
@@ -119,7 +119,7 @@ vcc_usb_host: vcc-host-regulator {
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
@@ -96,7 +96,7 @@ vcc_sys: vsys-regulator {
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
- gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
@@ -31,7 +31,7 @@ vcc33_io: vcc33_io {
vcc5_host2: vcc5-host2-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb2_pwr_en>;
regulator-name = "vcc5_host2";
@@ -105,7 +105,7 @@ vcc18_hdmi: SWITCH_REG2 {
&vcc50_hdmi {
enable-active-high;
- gpio = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>;
};
@@ -62,7 +62,7 @@ vcc_5v: vcc-5v {
vcc5_host1: vcc5-host1-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host1_pwr_en>;
regulator-name = "vcc5_host1";
@@ -74,7 +74,7 @@ vcc5_host1: vcc5-host1-regulator {
vcc5v_otg: vcc5v-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usbotg_pwren_h>;
regulator-name = "vcc5_host2";
@@ -9,7 +9,7 @@ / {
backlight_regulator: backlight-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bl_pwr_en>;
regulator-name = "backlight_regulator";
@@ -20,7 +20,7 @@ backlight_regulator: backlight-regulator {
panel_regulator: panel-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_enable_h>;
regulator-name = "panel_regulator";
@@ -30,7 +30,7 @@ panel_regulator: panel-regulator {
vcc18_lcd: vcc18-lcd {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&avdd_1v8_disp_en>;
regulator-name = "vcc18_lcd";
@@ -39,7 +39,7 @@ vcc33_io: vcc33-io {
vcc5_host1: vcc5-host1-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio5 RK_PC2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 RK_PC2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hub_usb1_pwr_en>;
regulator-name = "vcc5_host1";
@@ -50,7 +50,7 @@ vcc5_host1: vcc5-host1-regulator {
vcc5_host2: vcc5-host2-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio5 RK_PB6 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hub_usb2_pwr_en>;
regulator-name = "vcc5_host2";
@@ -61,7 +61,7 @@ vcc5_host2: vcc5-host2-regulator {
vcc5v_otg: vcc5v-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb_otg_pwr_en>;
regulator-name = "vcc5_otg";
@@ -190,14 +190,14 @@ btmrvl: btmrvl@2 {
&vcc50_hdmi {
enable-active-high;
- gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>;
};
&vcc_5v {
enable-active-high;
- gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&drv_5v>;
};
@@ -68,14 +68,14 @@ &sdmmc {
&vcc_5v {
enable-active-high;
- gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&drv_5v>;
};
&vcc50_hdmi {
enable-active-high;
- gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>;
};
@@ -198,14 +198,14 @@ &sdmmc {
&vcc_5v {
enable-active-high;
- gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&drv_5v>;
};
&vcc50_hdmi {
enable-active-high;
- gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>;
};
@@ -447,7 +447,7 @@ &usb_host1 {
&vcc50_hdmi {
enable-active-high;
- gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&power_hdmi_on>;
};
@@ -120,14 +120,14 @@ &sdmmc {
&vcc_5v {
enable-active-high;
- gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&drv_5v>;
};
&vcc50_hdmi {
enable-active-high;
- gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>;
};
@@ -60,14 +60,14 @@ &sdmmc {
&vcc_5v {
enable-active-high;
- gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&drv_5v>;
};
&vcc50_hdmi {
enable-active-high;
- gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>;
};
@@ -352,10 +352,10 @@ &usb_otg {
&vbus_host {
enable-active-high;
- gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */
+ gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */
};
&vbus_typec {
enable-active-high;
- gpio = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */
+ gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */
};
@@ -82,7 +82,7 @@ vcc50_hdmi: vcc50-hdmi {
compatible = "regulator-fixed";
regulator-name = "vcc50_hdmi";
enable-active-high;
- gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>; /* HDMI_EN */
+ gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>; /* HDMI_EN */
pinctrl-names = "default";
pinctrl-0 = <&vcc50_hdmi_en>;
regulator-always-on;
@@ -94,7 +94,7 @@ vusb1_5v: vusb1-5v {
compatible = "regulator-fixed";
regulator-name = "vusb1_5v";
enable-active-high;
- gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; /* OTG_VBUS_DRV */
+ gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; /* OTG_VBUS_DRV */
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-min-microvolt = <5000000>;
@@ -106,7 +106,7 @@ vusb2_5v: vusb2-5v {
compatible = "regulator-fixed";
regulator-name = "vusb2_5v";
enable-active-high;
- gpio = <&gpio8 RK_PB1 GPIO_ACTIVE_HIGH>; /* USB2_PWR_EN */
+ gpios = <&gpio8 RK_PB1 GPIO_ACTIVE_HIGH>; /* USB2_PWR_EN */
pinctrl-names = "default";
pinctrl-0 = <&usb2_pwr_en>;
regulator-min-microvolt = <5000000>;
@@ -14,7 +14,7 @@ aliases {
vccio_flash: vccio-flash-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&flash_vol_sel>;
regulator-name = "vccio_flash";
@@ -52,7 +52,7 @@ vemmc_reg: voltage-regulator-0 {
regulator-name = "V_EMMC_2.8V-fixed";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -40,7 +40,7 @@ vemmc_reg: regulator-0 {
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -49,7 +49,7 @@ tsp_reg: regulator-1 {
regulator-name = "TSP_FIXED_VOLTAGES";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpl0 3 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
regulator-boot-on;
@@ -61,7 +61,7 @@ cam_af_28v_reg: regulator-2 {
regulator-name = "8M_AF_2.8V_EN";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpk1 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -70,7 +70,7 @@ cam_io_en_reg: regulator-3 {
regulator-name = "CAM_IO_EN";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpe2 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -79,7 +79,7 @@ cam_io_12v_reg: regulator-4 {
regulator-name = "8M_1.2V_EN";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpe2 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -88,7 +88,7 @@ vt_core_15v_reg: regulator-5 {
regulator-name = "VT_CORE_1.5V";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
- gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpe2 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -45,7 +45,7 @@ mmc_reg: voltage-regulator {
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpx1 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -42,7 +42,7 @@ vemmc_reg: regulator-0 {
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -51,7 +51,7 @@ tsp_reg: regulator-1 {
regulator-name = "TSP_FIXED_VOLTAGES";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpl0 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -60,7 +60,7 @@ cam_af_28v_reg: regulator-2 {
regulator-name = "8M_AF_2.8V_EN";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpk1 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -69,7 +69,7 @@ cam_io_en_reg: regulator-3 {
regulator-name = "CAM_IO_EN";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpe2 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -78,7 +78,7 @@ cam_io_12v_reg: regulator-4 {
regulator-name = "8M_1.2V_EN";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpe2 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -87,7 +87,7 @@ vt_core_15v_reg: regulator-5 {
regulator-name = "VT_CORE_1.5V";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
- gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpe2 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -60,7 +60,7 @@ vemmc_reg: voltage-regulator {
regulator-name = "VMEM_VDD_2_8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpe1 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpe1 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -122,7 +122,7 @@ tsp_reg: voltage-regulator {
regulator-name = "TSP_2_8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpe2 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpe2 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -177,7 +177,7 @@ hdmi_en: voltage-regulator-hdmi-5v {
regulator-name = "HDMI_5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpe0 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpe0 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -271,7 +271,7 @@ backlight_reset_supply: voltage-regulator-2 {
regulator-name = "BACKLIGHT_ENVDDIO";
pinctrl-names = "default";
pinctrl-0 = <&backlight_reset>;
- gpio = <&gpm0 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpm0 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -282,7 +282,7 @@ display_3v3_supply: voltage-regulator-3 {
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_en>;
- gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; /* LCD_EN */
+ gpios = <&gpc0 1 GPIO_ACTIVE_HIGH>; /* LCD_EN */
enable-active-high;
};
@@ -40,7 +40,7 @@ lcd_vdd3_reg: voltage-regulator-10 {
regulator-name = "LCD_VDD_2.2V";
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
- gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpc0 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -49,7 +49,7 @@ ps_als_reg: voltage-regulator-11 {
regulator-name = "LED_A_3.0V";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpj0 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -91,12 +91,12 @@ &buck9_reg {
};
&cam_af_reg {
- gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpm0 4 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&cam_io_reg {
- gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpm0 2 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -205,11 +205,11 @@ &sound {
};
&submic_bias_reg {
- gpio = <&gpf2 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpf2 0 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
&touchkey_reg {
- gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpm0 0 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -74,7 +74,7 @@ vsil12: voltage-regulator-3 {
regulator-name = "VSIL_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&buck7_reg>;
};
@@ -84,7 +84,7 @@ vcc33mhl: voltage-regulator-4 {
regulator-name = "VCC_3.3_MHL";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -93,7 +93,7 @@ vcc18mhl: voltage-regulator-5 {
regulator-name = "VCC_1.8_MHL";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -119,7 +119,7 @@ mic_bias_reg: voltage-regulator-8 {
regulator-name = "MICBIAS_LDO_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpf1 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpf1 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -19,7 +19,7 @@ cam_vdda_reg: voltage-regulator-10 {
regulator-name = "CAM_SENSOR_CORE_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- gpio = <&gpm4 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpm4 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -29,12 +29,12 @@ &buck9_reg {
};
&cam_af_reg {
- gpio = <&gpm1 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpm1 1 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&cam_io_reg {
- gpio = <&gpm0 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpm0 7 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -110,6 +110,6 @@ &submic_bias_reg {
};
&touchkey_reg {
- gpio = <&gpm0 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpm0 5 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -31,7 +31,7 @@ vbus_otg_reg: regulator-1 {
regulator-name = "VBUS_VDD_5.0V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpl2 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpl2 0 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -48,7 +48,7 @@ regulator-1 {
regulator-name = "p3v3_en";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpa1 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpa1 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
@@ -44,7 +44,7 @@ mmc_reg: regulator-0 {
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpx1 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -180,7 +180,7 @@ usb3_vbus_reg: regulator-usb3 {
regulator-name = "P5.0V_USB3CON";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpx2 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb3_vbus_en>;
enable-active-high;
@@ -106,7 +106,7 @@ usb300_vbus_reg: regulator-usb300 {
regulator-name = "P5.0V_USB3CON0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gph0 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb300_vbus_en>;
enable-active-high;
@@ -117,7 +117,7 @@ usb301_vbus_reg: regulator-usb301 {
regulator-name = "P5.0V_USB3CON1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&gph0 1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb301_vbus_en>;
enable-active-high;
@@ -67,7 +67,7 @@ usb300_vbus_reg: regulator-3 {
regulator-name = "VBUS0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpg0 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpg0 5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb300_vbus_en>;
enable-active-high;
@@ -78,7 +78,7 @@ usb301_vbus_reg: regulator-4 {
regulator-name = "VBUS1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpg1 4 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpg1 4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb301_vbus_en>;
enable-active-high;
@@ -45,7 +45,7 @@ tsp_vdd: regulator-tsp-vdd-en {
regulator-name = "tsp_vdd_en";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpy3 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpy3 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -106,7 +106,7 @@ usb300_vbus_reg: regulator-usb300 {
regulator-name = "P5.0V_USB3CON0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
+ gpios = <&gph0 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb300_vbus_en>;
enable-active-high;
@@ -117,7 +117,7 @@ usb301_vbus_reg: regulator-usb301 {
regulator-name = "P5.0V_USB3CON1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&gph0 1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb301_vbus_en>;
enable-active-high;
@@ -44,7 +44,7 @@ vtf_reg: regulator-0 {
regulator-name = "V_TF_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&mp05 4 GPIO_ACTIVE_HIGH>;
+ gpios = <&mp05 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -63,7 +63,7 @@ vibrator_pwr: regulator-fixed-0 {
compatible = "regulator-fixed";
regulator-name = "vibrator-en";
enable-active-high;
- gpio = <&gpj1 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vibrator_ena>;
@@ -75,7 +75,7 @@ touchkey_vdd: regulator-fixed-1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
- gpio = <&gpj3 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpj3 2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&touchkey_vdd_ena>;
@@ -85,7 +85,7 @@ gp2a_vled: regulator-fixed-2 {
compatible = "regulator-fixed";
regulator-name = "VLED";
enable-active-high;
- gpio = <&gpj1 4 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpj1 4 GPIO_ACTIVE_HIGH>;
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
@@ -40,7 +40,7 @@ key-vol-up {
headset_micbias_reg: regulator-fixed-3 {
compatible = "regulator-fixed";
regulator-name = "Headset_Micbias";
- gpio = <&gpj2 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpj2 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
@@ -50,7 +50,7 @@ headset_micbias_reg: regulator-fixed-3 {
main_micbias_reg: regulator-fixed-4 {
compatible = "regulator-fixed";
regulator-name = "Main_Micbias";
- gpio = <&gpj4 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpj4 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
@@ -77,7 +77,7 @@ fmradio@10 {
micbias_reg: regulator-fixed-3 {
compatible = "regulator-fixed";
regulator-name = "MICBIAS";
- gpio = <&gpj4 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpj4 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
@@ -47,7 +47,7 @@ vtf_reg: regulator-0 {
regulator-name = "V_TF_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&mp05 4 GPIO_ACTIVE_HIGH>;
+ gpios = <&mp05 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -70,7 +70,7 @@ tsp_reg: regulator-3 {
regulator-name = "TSP_VDD";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpj1 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpj1 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -54,7 +54,7 @@ en_3v3_reg: en_3v3 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
/* AB8500 GPIOs start from 1 - offset 25 is GPIO26. */
- gpio = <&ab8500_gpio 25 0x4>;
+ gpios = <&ab8500_gpio 25 0x4>;
startup-delay-us = <5000>;
enable-active-high;
};
@@ -108,7 +108,7 @@ lcd_3v0_reg: regulator-gpio-lcd-3v0 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
/* GPIO219 controls this regulator */
- gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 27 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&lcd_pwr_en_default_mode>;
@@ -131,7 +131,7 @@ wl_reg: regulator-gpio-wlan {
regulator-max-microvolt = <3000000>;
startup-delay-us = <100000>;
/* GPIO215 (WLAN_RST_N to WL_REG_ON) */
- gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 23 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&wlan_ldo_en_default>;
@@ -122,7 +122,7 @@ ldo_tsp_3v3_reg: regulator-gpio-tsp-ldo-3v3 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
/* GPIO94 controls this regulator */
- gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
/* 70 ms power-on delay */
startup-delay-us = <70000>;
enable-active-high;
@@ -136,7 +136,7 @@ ldo_tsp_1v8_reg: regulator-gpio-tsp-ldo-1v8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
/* GPIO94 controls this regulator */
- gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
/* 70 ms power-on delay */
startup-delay-us = <70000>;
enable-active-high;
@@ -155,7 +155,7 @@ lcd_3v0_reg: regulator-gpio-lcd-3v0 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
/* GPIO219 controls this regulator */
- gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 27 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&lcd_pwr_en_default_mode>;
@@ -167,7 +167,7 @@ lcd_1v8_reg: regulator-gpio-lcd-1v8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
/* GPIO219 controls this regulator too */
- gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 27 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&lcd_pwr_en_default_mode>;
@@ -190,7 +190,7 @@ wl_reg: regulator-gpio-wlan {
regulator-max-microvolt = <3000000>;
startup-delay-us = <100000>;
/* GPIO215 (WLAN_RST_N to WL_REG_ON) */
- gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 23 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&wlan_ldo_en_default>;
@@ -76,7 +76,7 @@ ldo_3v3_reg: regulator-gpio-ldo-3v3 {
regulator-name = "VMEM_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
startup-delay-us = <5000>; // FIXME
enable-active-high;
pinctrl-names = "default";
@@ -95,7 +95,7 @@ ldo_tsp_3v3_reg: regulator-gpio-tsp-ldo-3v3 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
/* GPIO94 controls this regulator */
- gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
/* 70 ms power-on delay */
startup-delay-us = <70000>;
enable-active-high;
@@ -109,7 +109,7 @@ ldo_tsp_1v8_reg: regulator-gpio-tsp-ldo-1v8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
/* GPIO94 controls this regulator */
- gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
/* 70 ms power-on delay */
startup-delay-us = <70000>;
enable-active-high;
@@ -128,7 +128,7 @@ lcd_3v0_reg: regulator-gpio-lcd-3v0 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
/* GPIO219 controls this regulator */
- gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 27 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&lcd_pwr_en_default_mode>;
@@ -140,7 +140,7 @@ lcd_1v8_reg: regulator-gpio-lcd-1v8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
/* GPIO219 controls this regulator too */
- gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 27 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&lcd_pwr_en_default_mode>;
@@ -163,7 +163,7 @@ wl_reg: regulator-gpio-wlan {
regulator-max-microvolt = <3000000>;
startup-delay-us = <100000>;
/* GPIO215 (WLAN_RST_N to WL_REG_ON) */
- gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 23 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&wlan_ldo_en_default>;
@@ -459,7 +459,7 @@ vmem_3v3: regulator-vmem {
startup-delay-us = <200>;
/* GPIO223 (MEM_LDO_EN) */
- gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
@@ -499,7 +499,7 @@ wl_reg_on: regulator-wl-reg-on {
startup-delay-us = <100000>;
/* GPIO215 (WLAN_EN) */
- gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 23 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
@@ -514,7 +514,7 @@ panel_reg_1v8: regulator-panel-1v8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
/* GPIO219 */
- gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 27 GPIO_ACTIVE_HIGH>;
startup-delay-us = <200>;
enable-active-high;
@@ -531,7 +531,7 @@ panel_reg_3v0: regulator-panel-3v0 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
/* GPIO219 */
- gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 27 GPIO_ACTIVE_HIGH>;
startup-delay-us = <200>;
enable-active-high;
@@ -57,7 +57,7 @@ ldo_3v3_reg: regulator-gpio-ldo-3v3 {
regulator-name = "VMEM_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
startup-delay-us = <5000>; // FIXME
enable-active-high;
pinctrl-names = "default";
@@ -76,7 +76,7 @@ ldo_tsp_3v3_reg: regulator-gpio-tsp-ldo-3v3 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
/* GPIO94 controls this regulator */
- gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
/* 70 ms power-on delay */
startup-delay-us = <70000>;
enable-active-high;
@@ -90,7 +90,7 @@ ldo_tsp_1v8_reg: regulator-gpio-tsp-ldo-1v8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
/* GPIO94 controls this regulator */
- gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
/* 70 ms power-on delay */
startup-delay-us = <70000>;
enable-active-high;
@@ -111,7 +111,7 @@ ldo_kled_3v3_reg: regulator-gpio-vreg-kled-3v3 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
/* GPIO68 controls this regulator */
- gpio = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
/* 70 ms power-on delay */
startup-delay-us = <70000>;
enable-active-high;
@@ -125,7 +125,7 @@ ldo_touchkey_1v8_reg: regulator-gpio-vreg-touchkey-1v8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
/* GPIO89 controls this regulator */
- gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
/* 70 ms power-on delay */
startup-delay-us = <70000>;
enable-active-high;
@@ -145,7 +145,7 @@ lcd_3v0_reg: regulator-gpio-lcd-3v0 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
/* GPIO219 controls this regulator */
- gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 27 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&lcd_pwr_en_default_mode>;
@@ -157,7 +157,7 @@ lcd_1v8_reg: regulator-gpio-lcd-1v8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
/* GPIO219 controls this regulator */
- gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 27 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&lcd_pwr_en_default_mode>;
@@ -180,7 +180,7 @@ wl_reg: regulator-gpio-wlan {
regulator-max-microvolt = <3000000>;
startup-delay-us = <100000>;
/* GPIO215 (WLAN_RST_N to WL_REG_ON) */
- gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 23 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&wlan_ldo_en_default>;
@@ -79,7 +79,7 @@ ldo_3v3_reg: regulator-gpio-ldo-3v3 {
regulator-name = "en-3v3-fixed-supply";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
startup-delay-us = <5000>;
enable-active-high;
pinctrl-names = "default";
@@ -97,7 +97,7 @@ lcd_3v0_reg: regulator-gpio-lcd-3v0 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
/* GPIO219 controls this regulator */
- gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 27 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&lcd_pwr_en_default_mode>;
@@ -109,7 +109,7 @@ lcd_1v8_reg: regulator-gpio-lcd-1v8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
/* GPIO219 controls this regulator too */
- gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 27 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&lcd_pwr_en_default_mode>;
@@ -122,7 +122,7 @@ wlan_en: regulator-gpio-wlan-en {
regulator-max-microvolt = <3000000>;
startup-delay-us = <200000>;
/* GPIO215 WLAN_EN */
- gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 23 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&wlan_en_default_mode>;
@@ -75,7 +75,7 @@ ldo_3v3_reg: regulator-gpio-ldo-3v3 {
regulator-name = "en-3v3-fixed-supply";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
startup-delay-us = <5000>;
enable-active-high;
pinctrl-names = "default";
@@ -89,7 +89,7 @@ wlan_en: regulator-gpio-wlan-en {
regulator-max-microvolt = <3000000>;
startup-delay-us = <200000>;
/* GPIO215 WLAN_EN */
- gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio6 23 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&wlan_en_default_mode>;
@@ -94,7 +94,7 @@ button-0 {
/* This turns on vbus for otg for host mode (dwc2) */
vcc5v_otg: vcc5v-otg-regulator {
compatible = "regulator-fixed";
- gpio = <&gpioc 4 0>;
+ gpios = <&gpioc 4 0>;
regulator-name = "vcc5_host1";
regulator-always-on;
};
@@ -111,7 +111,7 @@ button-0 {
vcc5v_otg: vcc5v-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpiob 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpiob 2 GPIO_ACTIVE_HIGH>;
regulator-name = "vcc5_host1";
regulator-always-on;
};
@@ -88,7 +88,7 @@ usbotg_hs_phy: usb-phy {
/* This turns on vbus for otg fs for host mode (dwc2) */
vcc5v_otg_fs: vcc5v-otg-fs-regulator {
compatible = "regulator-fixed";
- gpio = <&gpiod 5 0>;
+ gpios = <&gpiod 5 0>;
regulator-name = "vcc5_host1";
regulator-always-on;
};
@@ -49,7 +49,7 @@ reg_t1l1: regulator-pse-t1l1 {
regulator-name = "pse-t1l1";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
- gpio = <&gpiog 13 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpiog 13 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -58,7 +58,7 @@ reg_t1l2: regulator-pse-t1l2 {
regulator-name = "pse-t1l2";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
- gpio = <&gpiog 14 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpiog 14 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -37,7 +37,7 @@ lcd_3v3: regulator-lcd-3v3 {
regulator-name = "lcd_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpiof 10 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpiof 10 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
power-supply = <&panel_pwr>;
@@ -48,7 +48,7 @@ panel_pwr: regulator-panel-pwr {
regulator-name = "panel_pwr";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpiob 10 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpiob 10 GPIO_ACTIVE_HIGH>;
regulator-always-on;
};
@@ -27,7 +27,7 @@ reg_iobus_12v: regulator-iobus-12v {
compatible = "regulator-fixed";
vin-supply = <®_12v>;
- gpio = <&gpioh 13 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpioh 13 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-max-microvolt = <12000000>;
regulator-min-microvolt = <12000000>;
@@ -26,7 +26,7 @@ backlight: backlight {
reg_iobus_12v: regulator-iobus-12v {
compatible = "regulator-fixed";
vin-supply = <®_12v>;
- gpio = <&gpioh 13 GPIO_ACTIVE_LOW>;
+ gpios = <&gpioh 13 GPIO_ACTIVE_LOW>;
regulator-max-microvolt = <12000000>;
regulator-min-microvolt = <12000000>;
regulator-name = "12V_IOBUS";
@@ -68,7 +68,7 @@ ethernet_vio: vioregulator {
regulator-name = "vio";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpiog 3 GPIO_ACTIVE_LOW>;
+ gpios = <&gpiog 3 GPIO_ACTIVE_LOW>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vdd>;
@@ -99,7 +99,7 @@ wlan_pwr: regulator-wlan {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpioz 3 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -41,7 +41,7 @@ ethernet_vio: vioregulator {
regulator-name = "vio";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpioh 2 GPIO_ACTIVE_LOW>;
+ gpios = <&gpioh 2 GPIO_ACTIVE_LOW>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vdd>;
@@ -32,7 +32,7 @@ reg_usb0_vbus: regulator_usb0 {
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&portb 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&portb 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -41,7 +41,7 @@ reg_usb1_vbus: regulator_usb1 {
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&portb 10 GPIO_ACTIVE_HIGH>;
+ gpios = <&portb 10 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -50,7 +50,7 @@ reg_usb2_vbus: regulator_usb2 {
regulator-name = "usb2_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&portb 12 GPIO_ACTIVE_HIGH>;
+ gpios = <&portb 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -61,7 +61,7 @@ reg_sdio1_vmmc: regulator_sdio1_vmmc {
regulator-name = "sdio1_vmmc";
enable-active-high;
regulator-boot-on;
- gpio = <&portb 21 GPIO_ACTIVE_HIGH>;
+ gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
};
reg_sdio1_vqmmc: regulator_sido1_vqmmc {
@@ -118,7 +118,7 @@ backlight_lcd: backlight-regulator {
regulator-name = "lcd_backlight_pwr";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio 47 GPIO_ACTIVE_HIGH>; /* lcd_backlight_pwr */
+ gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; /* lcd_backlight_pwr */
enable-active-high;
};
@@ -140,7 +140,7 @@ vcc5v: regulator1 {
regulator-name = "vcc5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio 101 0>;
+ gpios = <&gpio 101 0>;
over-current-gpios = <&gpio 99 GPIO_ACTIVE_LOW>;
enable-active-high;
regulator-boot-on;
@@ -165,7 +165,7 @@ adc_ref: regulator2 {
amp: regulator3 {
compatible = "regulator-fixed";
regulator-name = "amp";
- gpio = <&gpio 111 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 111 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -116,7 +116,7 @@ vddb: fixedregulator-vddb {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 53 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 53 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -41,7 +41,7 @@ wl12xx_vmmc: fixedregulator2 {
regulator-name = "vwl1271";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 8 0>;
+ gpios = <&gpio3 8 0>;
startup-delay-us = <70000>;
enable-active-high;
};
@@ -22,7 +22,7 @@ wlan_en_reg: fixedregulator@2 {
startup-delay-us = <70000>;
/* WL_EN */
- gpio = <&gpio3 9 0>;
+ gpios = <&gpio3 9 0>;
enable-active-high;
};
};
@@ -109,7 +109,7 @@ wlan_en_reg: fixedregulator@2 {
startup-delay-us = <70000>;
/* WL_EN */
- gpio = <&gpio3 9 0>;
+ gpios = <&gpio3 9 0>;
enable-active-high;
};
};
@@ -21,7 +21,7 @@ wlan_en_reg: fixedregulator@2 {
startup-delay-us = <70000>;
/* WL_EN */
- gpio = <&gpio0 26 0>;
+ gpios = <&gpio0 26 0>;
enable-active-high;
};
};
@@ -42,7 +42,7 @@ vmmc_fixed: fixedregulator0 {
vwlan_fixed: fixedregulator2 {
compatible = "regulator-fixed";
regulator-name = "vwlan_fixed";
- gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */
+ gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */
enable-active-high;
};
@@ -47,7 +47,7 @@ wlan_en_reg: fixedregulator2 {
regulator-max-microvolt = <1800000>;
/* WLAN_EN GPIO for this board - Bank1, pin16 */
- gpio = <&gpio1 16 0>;
+ gpios = <&gpio1 16 0>;
/* WLAN card specific delay */
startup-delay-us = <70000>;
@@ -54,7 +54,7 @@ wl12xx_vmmc: fixedregulator2 {
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio1 29 0>;
+ gpios = <&gpio1 29 0>;
startup-delay-us = <70000>;
enable-active-high;
};
@@ -64,7 +64,7 @@ vtt_fixed: fixedregulator3 {
regulator-name = "vtt";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
- gpio = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
regulator-always-on;
regulator-boot-on;
enable-active-high;
@@ -38,7 +38,7 @@ vtt_fixed: fixedregulator1 {
regulator-name = "vtt";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
- gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
regulator-always-on;
regulator-boot-on;
enable-active-high;
@@ -19,7 +19,7 @@ wl12xx_buffer: wl12xx_buf {
regulator-max-microvolt = <1800000>;
pinctrl-names = "default";
pinctrl-0 = <&wl12xx_buffer_pins>;
- gpio = <&gpio5 1 GPIO_ACTIVE_LOW>; /* gpio 129 */
+ gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; /* gpio 129 */
regulator-always-on;
vin-supply = <&vdd_1v8_reg>;
};
@@ -31,7 +31,7 @@ wl12xx_vmmc2: wl12xx_vmmc2 {
regulator-max-microvolt = <1800000>;
pinctrl-names = "default";
pinctrl-0 = <&wl12xx_wkup_pins>;
- gpio = <&gpio1 3 GPIO_ACTIVE_HIGH >; /* gpio 3 */
+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH >; /* gpio 3 */
startup-delay-us = <70000>;
enable-active-high;
regulator-always-on;
@@ -40,7 +40,7 @@ vtt_fixed: fixedregulator-vtt {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>;
};
vmmcwl_fixed: fixedregulator-mmcwl {
@@ -48,7 +48,7 @@ vmmcwl_fixed: fixedregulator-mmcwl {
regulator-name = "vmmcwl_fixed";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -153,7 +153,7 @@ vmmcwl_fixed: fixedregulator-mmcwl {
regulator-name = "vmmcwl_fixed";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -111,7 +111,7 @@ vtt_fixed: fixedregulator-vtt {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
};
leds {
@@ -18,7 +18,7 @@ usb_power: regulator@9 {
regulator-name = "usb_power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
@@ -75,7 +75,7 @@ evm_3v3_sd: fixedregulator-sd {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
- gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
};
evm_3v3_sw: fixedregulator-evm_3v3_sw {
@@ -132,7 +132,7 @@ vmmcwl_fixed: fixedregulator-mmcwl {
regulator-name = "vmmcwl_fixed";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio5 8 0>;
+ gpios = <&gpio5 8 0>;
startup-delay-us = <70000>;
enable-active-high;
};
@@ -146,7 +146,7 @@ vtt_fixed: fixedregulator-vtt {
regulator-boot-on;
enable-active-high;
vin-supply = <&sysen2>;
- gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
};
};
@@ -91,7 +91,7 @@ evm_3v3_sd: fixedregulator-sd {
regulator-max-microvolt = <3300000>;
vin-supply = <&evm_3v3_sw>;
enable-active-high;
- gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
};
extcon_usb1: extcon_usb1 {
@@ -185,7 +185,7 @@ vmmcwl_fixed: fixedregulator-mmcwl {
regulator-name = "vmmcwl_fixed";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -118,7 +118,7 @@ vio_3v3_sd: fixedregulator-sd {
regulator-max-microvolt = <3300000>;
vin-supply = <&vio_3v3>;
enable-active-high;
- gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
};
vio_1v8: fixedregulator-vio_1v8 {
@@ -134,7 +134,7 @@ vmmcwl_fixed: fixedregulator-mmcwl {
regulator-name = "vmmcwl_fixed";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio5 8 0>; /* gpio5_8 */
+ gpios = <&gpio5 8 0>; /* gpio5_8 */
startup-delay-us = <70000>;
enable-active-high;
};
@@ -19,7 +19,7 @@ wl12xx_vmmc: wl12xx_vmmc {
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio1 3 0>; /* gpio_3 */
+ gpios = <&gpio1 3 0>; /* gpio_3 */
startup-delay-us = <70000>;
enable-active-high;
vin-supply = <&vaux3>;
@@ -16,7 +16,7 @@ wl12xx_vmmc: wl12xx_vmmc {
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio5 29 0>; /* gpio157 */
+ gpios = <&gpio5 29 0>; /* gpio157 */
startup-delay-us = <70000>;
enable-active-high;
vin-supply = <&vmmc2>;
@@ -49,7 +49,7 @@ hdmi_regulator: regulator-hdmi {
regulator-name = "hdmi";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio59 */
+ gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio59 */
enable-active-high;
regulator-always-on;
};
@@ -60,7 +60,7 @@ wl12xx_vmmc: regulator-wl12xx {
regulator-name = "vwl1271";
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <1650000>;
- gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; /* gpio94 */
+ gpios = <&gpio3 30 GPIO_ACTIVE_HIGH>; /* gpio94 */
startup-delay-us = <70000>;
enable-active-high;
};
@@ -18,7 +18,7 @@ lcd_regulator: regulator-lcd {
regulator-name = "lcd";
regulator-min-microvolt = <5050000>;
regulator-max-microvolt = <5050000>;
- gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */
+ gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */
enable-active-high;
vin-supply = <&sw5>;
};
@@ -85,7 +85,7 @@ hsusb2_power: hsusb2_power_reg {
regulator-name = "hsusb2_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */
+ gpios = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */
startup-delay-us = <70000>;
};
@@ -52,7 +52,7 @@ hsusb2_power: hsusb2_power_reg {
regulator-name = "hsusb2_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */
+ gpios = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */
startup-delay-us = <70000>;
};
@@ -28,7 +28,7 @@ &wl12xx_core_pins
>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio1 6 GPIO_ACTIVE_HIGH >; /* gpio6 */
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH >; /* gpio6 */
startup-delay-us = <20000>;
enable-active-high;
};
@@ -17,7 +17,7 @@ mmc2_sdio_reset: regulator-mmc2-sdio-reset {
regulator-name = "regulator-mmc2-sdio-reset";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
@@ -18,7 +18,7 @@ wl12xx_vmmc2: wl12xx_vmmc2 {
pinctrl-0 = <&wl12xx_gpio>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>; /* gpio73 */
+ gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>; /* gpio73 */
startup-delay-us = <20000>;
enable-active-high;
};
@@ -19,7 +19,7 @@ hsusb2_power: hsusb2_power_reg {
regulator-name = "hsusb2_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; /* gpio_22 */
+ gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; /* gpio_22 */
startup-delay-us = <70000>;
enable-active-high;
};
@@ -46,7 +46,7 @@ wl12xx_vmmc: wl12xx_vmmc {
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* gpio150 */
+ gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* gpio150 */
startup-delay-us = <70000>;
enable-active-high;
vin-supply = <&vmmc2>;
@@ -95,7 +95,7 @@ tvp5146@5c {
};
&lcd_3v3 {
- gpio = <&gpio5 25 GPIO_ACTIVE_LOW>; /* gpio153 */
+ gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; /* gpio153 */
};
&lcd0 {
@@ -20,7 +20,7 @@ wlan_en: wlan_en_regulator {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* GPIO_138 */
+ gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* GPIO_138 */
startup-delay-us = <70000>;
enable-active-high;
@@ -46,7 +46,7 @@ hsusb1_power: hsusb1_power_reg {
regulator-name = "hsusb1_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* GPIO LEDA */
+ gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* GPIO LEDA */
startup-delay-us = <70000>;
};
@@ -18,7 +18,7 @@ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
regulator-name = "regulator-lbep5clwmc-wlen";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - WL_EN */
+ gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - WL_EN */
enable-active-high;
};
};
@@ -18,7 +18,7 @@ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
regulator-name = "regulator-lbep5clwmc-wlen";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - WL_EN */
+ gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - WL_EN */
enable-active-high;
};
};
@@ -24,7 +24,7 @@ vemmc: fixedregulator0 {
regulator-name = "VEMMC";
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
- gpio = <&gpio5 29 GPIO_ACTIVE_HIGH>; /* gpio line 157 */
+ gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; /* gpio line 157 */
startup-delay-us = <150>;
enable-active-high;
};
@@ -32,7 +32,7 @@ vemmc: fixedregulator0 {
vwlan_fixed: fixedregulator2 {
compatible = "regulator-fixed";
regulator-name = "VWLAN";
- gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; /* gpio 35 */
+ gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; /* gpio 35 */
enable-active-high;
};
@@ -38,7 +38,7 @@ hsusb2_power: hsusb2_power_reg {
regulator-name = "hsusb2_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio6 8 GPIO_ACTIVE_HIGH>; /* gpio_168: vbus enable */
+ gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; /* gpio_168: vbus enable */
startup-delay-us = <70000>;
enable-active-high;
};
@@ -57,7 +57,7 @@ w3cbw003c_npoweron: regulator-w3cbw003c-npoweron {
regulator-name = "regulator-w3cbw003c-npoweron";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54: nPoweron */
+ gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54: nPoweron */
enable-active-high;
};
@@ -69,7 +69,7 @@ w3cbw003c_wifi_nreset: regulator-w3cbw003c-wifi-nreset {
regulator-name = "regulator-w3cbw003c-wifi-nreset";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* gpio_16: WiFi nReset */
+ gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* gpio_16: WiFi nReset */
startup-delay-us = <10000>;
};
};
@@ -223,7 +223,7 @@ usb_host_5v: fixed-regulator-usb_host_5v {
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* GPIO_164 */
+ gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* GPIO_164 */
};
/* wl1251 wifi+bt module */
@@ -234,7 +234,7 @@ wlan_en: fixed-regulator-wg7210_en {
regulator-max-microvolt = <1800000>;
startup-delay-us = <50000>;
enable-active-high;
- gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
};
/* wg7210 (wifi+bt module) 32k clock buffer */
@@ -245,7 +245,7 @@ wg7210_32k: fixed-regulator-wg7210_32k {
regulator-max-microvolt = <1800000>;
regulator-always-on;
enable-active-high;
- gpio = <&twl_gpio 13 GPIO_ACTIVE_HIGH>;
+ gpios = <&twl_gpio 13 GPIO_ACTIVE_HIGH>;
};
};
@@ -50,7 +50,7 @@ audio_amp: audio_amp {
regulator-name = "audio_amp";
pinctrl-names = "default";
pinctrl-0 = <&sb_t35_audio_amp>;
- gpio = <&gpio2 29 GPIO_ACTIVE_LOW>; /* gpio_61 */
+ gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; /* gpio_61 */
regulator-always-on;
};
};
@@ -38,7 +38,7 @@ hsusb2_power: hsusb2_power_reg {
regulator-name = "hsusb2_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */
+ gpios = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */
startup-delay-us = <70000>;
};
@@ -64,7 +64,7 @@ mmc2_sdio_poweron: regulator-mmc2-sdio-poweron {
regulator-name = "regulator-mmc2-sdio-poweron";
regulator-min-microvolt = <3150000>;
regulator-max-microvolt = <3150000>;
- gpio = <&gpio5 29 GPIO_ACTIVE_LOW>; /* gpio_157 */
+ gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; /* gpio_157 */
startup-delay-us = <10000>;
};
};
@@ -41,7 +41,7 @@ wl12xx_vmmc: wl12xx_vmmc {
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */
+ gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */
startup-delay-us = <70000>;
enable-active-high;
};
@@ -59,7 +59,7 @@ w2cbw0015_vmmc: w2cbw0015_vmmc {
regulator-name = "w2cbw0015";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- gpio = <&gpio2 11 GPIO_ACTIVE_LOW>; /* gpio_43 */
+ gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; /* gpio_43 */
startup-delay-us = <70000>;
enable-active-high;
regulator-boot-on;
@@ -65,7 +65,7 @@ wl12xx_vmmc: wl12xx-vmmc {
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
@@ -107,7 +107,7 @@ hsusb1_power: hsusb1_power_reg {
regulator-name = "hsusb1_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; /* gpio_1 */
+ gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; /* gpio_1 */
startup-delay-us = <70000>;
enable-active-high;
/*
@@ -138,7 +138,7 @@ wl12xx_vmmc: wl12xx_vmmc {
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
@@ -31,7 +31,7 @@ vdd_eth: fixedregulator-vdd-eth {
regulator-name = "VDD_ETH";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; /* gpio line 48 */
+ gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>; /* gpio line 48 */
enable-active-high;
regulator-boot-on;
startup-delay-us = <25000>;
@@ -159,7 +159,7 @@ wl12xx_vmmc: wl12xx_vmmc {
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
@@ -12,7 +12,7 @@ wl12xx_vmmc: wl12xx_vmmc {
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; /* gpio 43 */
+ gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; /* gpio 43 */
startup-delay-us = <70000>;
enable-active-high;
};
@@ -48,7 +48,7 @@ vmmcsdio_fixed: fixedregulator-mmcsdio {
regulator-name = "vmmcsdio_fixed";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio5 12 GPIO_ACTIVE_HIGH>; /* gpio140 WLAN_EN */
+ gpios = <&gpio5 12 GPIO_ACTIVE_HIGH>; /* gpio140 WLAN_EN */
enable-active-high;
startup-delay-us = <70000>;
pinctrl-names = "default";
@@ -36,7 +36,7 @@ vwlan_pdn_fixed: fixed-regulator-vwlan-pdn {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&ldo2_reg>;
- gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* gpio4_109 */
+ gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* gpio4_109 */
startup-delay-us = <1000>;
enable-active-high;
};
@@ -47,7 +47,7 @@ vwlan_fixed: fixed-regulator-vwlan {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vwlan_pdn_fixed>;
- gpio = <&gpio4 14 GPIO_ACTIVE_HIGH>; /* gpio4_110 */
+ gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; /* gpio4_110 */
startup-delay-us = <1000>;
enable-active-high;
};
Found with dtc: Warning (deprecated_gpio_property): '[*-]gpio' is deprecated, use '[*-]gpios' instead Transformation performed with find -name "*.dts" -exec sed -i 's/\tgpio = </\tgpios = </g' '{}' \ find -name "*.dtsi" -exec sed -i 's/\tgpio = </\tgpios = </g' '{}' \ Signed-off-by: Rosen Penev <rosenp@gmail.com> --- .../boot/dts/allwinner/sun4i-a10-a1000.dts | 2 +- .../dts/allwinner/sun4i-a10-ba10-tvbox.dts | 2 +- .../allwinner/sun4i-a10-dserve-dsrv9703c.dts | 2 +- .../dts/allwinner/sun4i-a10-hackberry.dts | 4 +-- .../dts/allwinner/sun4i-a10-hyundai-a7hd.dts | 2 +- .../dts/allwinner/sun4i-a10-jesurun-q5.dts | 2 +- .../boot/dts/allwinner/sun4i-a10-mk802.dts | 2 +- .../allwinner/sun4i-a10-olinuxino-lime.dts | 2 +- .../boot/dts/allwinner/sun4i-a10-pcduino2.dts | 2 +- .../dts/allwinner/sun4i-a10-topwise-a721.dts | 2 +- .../dts/allwinner/sun5i-a10s-auxtek-t003.dts | 4 +-- .../dts/allwinner/sun5i-a10s-auxtek-t004.dts | 4 +-- .../boot/dts/allwinner/sun5i-a10s-mk802.dts | 2 +- .../allwinner/sun5i-a10s-olinuxino-micro.dts | 4 +-- .../dts/allwinner/sun5i-a10s-r7-tv-dongle.dts | 2 +- .../boot/dts/allwinner/sun5i-a10s-wobo-i5.dts | 4 +-- .../sun5i-a13-empire-electronix-d709.dts | 2 +- .../boot/dts/allwinner/sun5i-a13-hsg-h702.dts | 2 +- .../dts/allwinner/sun5i-a13-licheepi-one.dts | 2 +- .../allwinner/sun5i-a13-olinuxino-micro.dts | 4 +-- .../dts/allwinner/sun5i-a13-olinuxino.dts | 4 +-- .../sun5i-a13-pocketbook-614-plus.dts | 6 ++--- .../sun5i-a13-pocketbook-touch-lux-3.dts | 8 +++--- .../boot/dts/allwinner/sun5i-a13-utoo-p66.dts | 2 +- arch/arm/boot/dts/allwinner/sun5i-gr8-evb.dts | 2 +- arch/arm/boot/dts/allwinner/sun5i-r8-chip.dts | 2 +- .../sun5i-reference-design-tablet.dtsi | 2 +- .../dts/allwinner/sun6i-a31-app4-evb1.dts | 2 +- .../boot/dts/allwinner/sun6i-a31-colombus.dts | 2 +- .../dts/allwinner/sun6i-a31-hummingbird.dts | 4 +-- arch/arm/boot/dts/allwinner/sun6i-a31-i7.dts | 2 +- arch/arm/boot/dts/allwinner/sun6i-a31-m9.dts | 2 +- .../allwinner/sun6i-a31-mele-a1000g-quad.dts | 2 +- .../allwinner/sun7i-a20-bananapi-m1-plus.dts | 2 +- .../boot/dts/allwinner/sun7i-a20-bananapi.dts | 2 +- .../dts/allwinner/sun7i-a20-bananapro.dts | 6 ++--- .../dts/allwinner/sun7i-a20-cubietruck.dts | 4 +-- .../dts/allwinner/sun7i-a20-hummingbird.dts | 8 +++--- .../dts/allwinner/sun7i-a20-i12-tvbox.dts | 6 ++--- .../dts/allwinner/sun7i-a20-lamobo-r1.dts | 6 ++--- .../allwinner/sun7i-a20-olimex-som-evb.dts | 2 +- .../allwinner/sun7i-a20-olimex-som204-evb.dts | 4 +-- .../allwinner/sun7i-a20-olinuxino-lime.dts | 2 +- .../allwinner/sun7i-a20-olinuxino-lime2.dts | 4 +-- .../dts/allwinner/sun7i-a20-orangepi-mini.dts | 6 ++--- .../boot/dts/allwinner/sun7i-a20-orangepi.dts | 6 ++--- .../dts/allwinner/sun7i-a20-pcduino3-nano.dts | 4 +-- .../boot/dts/allwinner/sun7i-a20-pcduino3.dts | 2 +- .../sun8i-a83t-allwinner-h8homlet-v2.dts | 4 +-- .../dts/allwinner/sun8i-a83t-bananapi-m3.dts | 4 +-- .../allwinner/sun8i-a83t-cubietruck-plus.dts | 4 +-- .../dts/allwinner/sun8i-a83t-tbs-a711.dts | 2 +- .../sun8i-h2-plus-bananapi-m2-zero.dts | 4 +-- .../allwinner/sun8i-h2-plus-orangepi-r1.dts | 2 +- .../allwinner/sun8i-h2-plus-orangepi-zero.dts | 2 +- .../dts/allwinner/sun8i-h3-beelink-x2.dts | 2 +- .../dts/allwinner/sun8i-h3-nanopi-duo2.dts | 6 ++--- .../dts/allwinner/sun8i-h3-nanopi-m1-plus.dts | 2 +- .../boot/dts/allwinner/sun8i-h3-nanopi-r1.dts | 4 +-- .../dts/allwinner/sun8i-h3-orangepi-2.dts | 2 +- .../dts/allwinner/sun8i-h3-orangepi-one.dts | 2 +- .../dts/allwinner/sun8i-h3-orangepi-pc.dts | 2 +- .../dts/allwinner/sun8i-h3-orangepi-plus.dts | 4 +-- .../allwinner/sun8i-h3-orangepi-plus2e.dts | 2 +- .../boot/dts/allwinner/sun8i-h3-zeropi.dts | 2 +- .../boot/dts/allwinner/sun8i-r16-parrot.dts | 2 +- .../allwinner/sun8i-r40-bananapi-m2-ultra.dts | 2 +- .../boot/dts/allwinner/sun8i-s3-pinecube.dts | 2 +- .../boot/dts/allwinner/sun8i-t3-cqa3t-bv3.dts | 2 +- .../allwinner/sun8i-v40-bananapi-m2-berry.dts | 2 +- .../boot/dts/allwinner/sun9i-a80-optimus.dts | 4 +-- .../dts/allwinner/sunxi-bananapi-m2-plus.dtsi | 4 +-- .../allwinner/sunxi-common-regulators.dtsi | 8 +++--- .../allwinner/sunxi-h3-h5-emlid-neutis.dtsi | 2 +- .../allwinner/sunxi-libretech-all-h3-cc.dtsi | 8 +++--- .../allwinner/sunxi-libretech-all-h3-it.dtsi | 8 +++--- arch/arm/boot/dts/amlogic/meson8b-ec100.dts | 4 +-- .../arm/boot/dts/amlogic/meson8b-odroidc1.dts | 2 +- .../aspeed/aspeed-bmc-facebook-bletchley.dts | 12 ++++----- .../arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts | 4 +-- .../boot/dts/broadcom/bcm2711-rpi-cm4.dtsi | 2 +- arch/arm/boot/dts/cirrus/ep7211-edb7211.dts | 4 +-- .../boot/dts/gemini/gemini-dlink-dir-685.dts | 2 +- .../dts/intel/pxa/pxa300-raumfeld-common.dtsi | 2 +- .../intel/pxa/pxa300-raumfeld-controller.dts | 2 +- .../socfpga/socfpga_cyclone5_vining_fpga.dts | 2 +- .../dts/marvell/armada-370-dlink-dns327l.dts | 6 ++--- .../marvell/armada-370-seagate-nas-4bay.dts | 4 +-- .../marvell/armada-370-seagate-nas-xbay.dtsi | 4 +-- ...armada-370-seagate-personal-cloud-2bay.dts | 2 +- .../armada-370-seagate-personal-cloud.dtsi | 4 +-- .../marvell/armada-370-synology-ds213j.dts | 4 +-- .../dts/marvell/armada-385-clearfog-gtr.dtsi | 2 +- .../arm/boot/dts/marvell/armada-385-db-ap.dts | 2 +- .../dts/marvell/armada-385-linksys-rango.dts | 2 +- .../boot/dts/marvell/armada-385-linksys.dtsi | 2 +- .../dts/marvell/armada-385-synology-ds116.dts | 6 ++--- arch/arm/boot/dts/marvell/armada-388-gp.dts | 14 +++++----- .../boot/dts/marvell/armada-388-helios4.dts | 2 +- .../dts/marvell/armada-xp-synology-ds414.dts | 8 +++--- arch/arm/boot/dts/marvell/dove-cm-a510.dtsi | 2 +- arch/arm/boot/dts/marvell/dove-cubox.dts | 2 +- arch/arm/boot/dts/marvell/dove-d3plug.dts | 2 +- arch/arm/boot/dts/marvell/dove-sbc-a510.dts | 4 +-- .../marvell/kirkwood-blackarmor-nas220.dts | 4 +-- arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi | 4 +-- .../boot/dts/marvell/kirkwood-dockstar.dts | 2 +- .../boot/dts/marvell/kirkwood-goflexnet.dts | 2 +- arch/arm/boot/dts/marvell/kirkwood-l-50.dts | 8 +++--- arch/arm/boot/dts/marvell/kirkwood-laplug.dts | 6 ++--- .../marvell/kirkwood-linkstation-6282.dtsi | 4 +-- .../kirkwood-linkstation-duo-6281.dtsi | 6 ++--- .../marvell/kirkwood-linkstation-lsqvl.dts | 2 +- .../marvell/kirkwood-linkstation-lswvl.dts | 2 +- arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi | 4 +-- .../arm/boot/dts/marvell/kirkwood-nas2big.dts | 2 +- .../arm/boot/dts/marvell/kirkwood-net2big.dts | 2 +- .../arm/boot/dts/marvell/kirkwood-net5big.dts | 8 +++--- .../kirkwood-netgear_readynas_duo_v2.dts | 2 +- .../kirkwood-netgear_readynas_nv+_v2.dts | 2 +- .../boot/dts/marvell/kirkwood-netxbig.dtsi | 2 +- .../arm/boot/dts/marvell/kirkwood-nsa310s.dts | 4 +-- arch/arm/boot/dts/marvell/kirkwood-nsa325.dts | 2 +- .../dts/marvell/kirkwood-nsa3x0-common.dtsi | 2 +- .../boot/dts/marvell/kirkwood-pogo_e02.dts | 2 +- .../boot/dts/marvell/kirkwood-rd88f6192.dts | 2 +- .../marvell/kirkwood-sheevaplug-common.dtsi | 2 +- .../boot/dts/marvell/kirkwood-synology.dtsi | 26 +++++++++---------- arch/arm/boot/dts/marvell/kirkwood-t5325.dts | 2 +- .../arm/boot/dts/marvell/kirkwood-topkick.dts | 2 +- .../boot/dts/marvell/mmp2-olpc-xo-1-75.dts | 2 +- .../dts/marvell/orion5x-lacie-d2-network.dts | 4 +-- arch/arm/boot/dts/marvell/orion5x-lswsgl.dts | 6 ++--- arch/arm/boot/dts/mediatek/mt2701-evb.dts | 2 +- .../boot/dts/microchip/at91-kizbox3-hs.dts | 22 ++++++++-------- .../boot/dts/microchip/at91-sama5d3_eds.dts | 2 +- .../microchip/at91-sama5d3_ksz9477_evb.dts | 2 +- .../dts/microchip/at91-sama5d3_xplained.dts | 2 +- .../dts/microchip/at91-sama5d4_ma5d4.dtsi | 2 +- .../dts/microchip/at91-sama5d4_ma5d4evk.dts | 2 +- .../dts/microchip/at91-sama5d4_xplained.dts | 2 +- arch/arm/boot/dts/nspire/nspire-classic.dtsi | 2 +- arch/arm/boot/dts/nspire/nspire-cx.dts | 2 +- .../boot/dts/nvidia/tegra114-asus-tf701t.dts | 20 +++++++------- arch/arm/boot/dts/nvidia/tegra114-dalmore.dts | 10 +++---- arch/arm/boot/dts/nvidia/tegra114-roth.dts | 10 +++---- arch/arm/boot/dts/nvidia/tegra114-tn7.dts | 4 +-- .../boot/dts/nvidia/tegra124-apalis-eval.dts | 4 +-- .../dts/nvidia/tegra124-apalis-v1.2-eval.dts | 4 +-- .../boot/dts/nvidia/tegra124-apalis-v1.2.dtsi | 4 +-- arch/arm/boot/dts/nvidia/tegra124-apalis.dtsi | 4 +-- .../boot/dts/nvidia/tegra124-jetson-tk1.dts | 16 ++++++------ arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi | 18 ++++++------- arch/arm/boot/dts/nvidia/tegra124-venice2.dts | 18 ++++++------- .../dts/nvidia/tegra20-acer-a500-picasso.dts | 2 +- .../boot/dts/nvidia/tegra20-asus-tf101.dts | 6 ++--- .../dts/nvidia/tegra20-colibri-eval-v3.dts | 2 +- .../boot/dts/nvidia/tegra20-colibri-iris.dts | 2 +- arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi | 2 +- arch/arm/boot/dts/nvidia/tegra20-harmony.dts | 12 ++++----- arch/arm/boot/dts/nvidia/tegra20-paz00.dts | 2 +- arch/arm/boot/dts/nvidia/tegra20-seaboard.dts | 12 ++++----- .../arm/boot/dts/nvidia/tegra20-tamonten.dtsi | 2 +- .../arm/boot/dts/nvidia/tegra20-trimslice.dts | 2 +- arch/arm/boot/dts/nvidia/tegra20-ventana.dts | 8 +++--- .../boot/dts/nvidia/tegra30-apalis-eval.dts | 4 +-- .../dts/nvidia/tegra30-apalis-v1.1-eval.dts | 4 +-- .../boot/dts/nvidia/tegra30-apalis-v1.1.dtsi | 4 +-- arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi | 4 +-- .../tegra30-asus-nexus7-grouper-common.dtsi | 2 +- ...egra30-asus-nexus7-grouper-maxim-pmic.dtsi | 4 +-- .../tegra30-asus-nexus7-grouper-ti-pmic.dtsi | 2 +- .../boot/dts/nvidia/tegra30-asus-tf700t.dts | 2 +- .../tegra30-asus-transformer-common.dtsi | 16 ++++++------ arch/arm/boot/dts/nvidia/tegra30-beaver.dts | 14 +++++----- .../boot/dts/nvidia/tegra30-cardhu-a02.dts | 12 ++++----- .../boot/dts/nvidia/tegra30-cardhu-a04.dts | 14 +++++----- arch/arm/boot/dts/nvidia/tegra30-cardhu.dtsi | 24 ++++++++--------- .../dts/nvidia/tegra30-colibri-eval-v3.dts | 2 +- arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi | 6 ++--- arch/arm/boot/dts/nvidia/tegra30-lg-p895.dts | 2 +- arch/arm/boot/dts/nvidia/tegra30-lg-x3.dtsi | 18 ++++++------- arch/arm/boot/dts/nvidia/tegra30-ouya.dts | 16 ++++++------ .../dts/nvidia/tegra30-pegatron-chagall.dts | 12 ++++----- arch/arm/boot/dts/nxp/imx/e60k02.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/e70k02.dtsi | 2 +- ...25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts | 2 +- arch/arm/boot/dts/nxp/imx/imx25-karo-tx25.dts | 2 +- arch/arm/boot/dts/nxp/imx/imx25-pdk.dts | 4 +-- .../imx/imx27-eukrea-mbimxsd27-baseboard.dts | 2 +- .../dts/nxp/imx/imx27-phytec-phycore-rdk.dts | 2 +- arch/arm/boot/dts/nxp/imx/imx51-babbage.dts | 2 +- .../imx/imx51-eukrea-mbimxsd51-baseboard.dts | 2 +- arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts | 2 +- .../boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts | 2 +- .../boot/dts/nxp/imx/imx51-zii-scu3-esb.dts | 2 +- arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts | 2 +- arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts | 4 +-- arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts | 2 +- arch/arm/boot/dts/nxp/imx/imx53-mba53.dts | 2 +- arch/arm/boot/dts/nxp/imx/imx53-ppd.dts | 6 ++--- .../boot/dts/nxp/imx/imx53-qsb-common.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts | 4 +-- arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts | 4 +-- arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts | 4 +-- arch/arm/boot/dts/nxp/imx/imx53-tx53.dtsi | 6 ++--- .../dts/nxp/imx/imx53-voipac-dmm-668.dtsi | 2 +- .../dts/nxp/imx/imx6-logicpd-baseboard.dtsi | 20 +++++++------- .../boot/dts/nxp/imx/imx6-logicpd-som.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts | 4 +-- arch/arm/boot/dts/nxp/imx/imx6dl-b1x5pv2.dtsi | 8 +++--- .../dts/nxp/imx/imx6dl-colibri-iris-v2.dts | 2 +- .../dts/nxp/imx/imx6dl-eckelmann-ci4x10.dts | 2 +- arch/arm/boot/dts/nxp/imx/imx6dl-lanmcu.dts | 2 +- arch/arm/boot/dts/nxp/imx/imx6dl-mamoj.dts | 18 ++++++------- arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts | 4 +-- arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts | 2 +- .../arm/boot/dts/nxp/imx/imx6dl-riotboard.dts | 2 +- arch/arm/boot/dts/nxp/imx/imx6dl-sielaff.dts | 4 +-- .../boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi | 6 ++--- .../dts/nxp/imx/imx6dl-yapp43-common.dtsi | 4 +-- .../dts/nxp/imx/imx6q-apalis-eval-v1.2.dts | 8 +++--- .../boot/dts/nxp/imx/imx6q-apalis-eval.dts | 2 +- .../dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts | 6 ++--- arch/arm/boot/dts/nxp/imx/imx6q-arm2.dts | 2 +- arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi | 4 +-- arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts | 2 +- arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi | 4 +-- arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts | 6 ++--- arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi | 4 +-- .../boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts | 4 +-- arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts | 2 +- arch/arm/boot/dts/nxp/imx/imx6q-evi.dts | 4 +-- arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts | 2 +- arch/arm/boot/dts/nxp/imx/imx6q-h100.dts | 6 ++--- arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx6q-logicpd.dts | 4 +-- arch/arm/boot/dts/nxp/imx/imx6q-marsboard.dts | 2 +- arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts | 2 +- arch/arm/boot/dts/nxp/imx/imx6q-novena.dts | 10 +++---- arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts | 4 +-- arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts | 2 +- .../dts/nxp/imx/imx6q-var-dt6customboard.dts | 4 +-- arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi | 6 ++--- .../dts/nxp/imx/imx6qdl-aristainetos.dtsi | 4 +-- .../dts/nxp/imx/imx6qdl-aristainetos2.dtsi | 4 +-- .../arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi | 2 +- .../arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi | 4 +-- .../dts/nxp/imx/imx6qdl-dfi-fs700-m60.dtsi | 2 +- .../boot/dts/nxp/imx/imx6qdl-dhcom-som.dtsi | 6 ++--- .../boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi | 4 +-- arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi | 4 +-- arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi | 4 +-- arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi | 4 +-- arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi | 4 +-- arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi | 6 ++--- arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi | 2 +- .../dts/nxp/imx/imx6qdl-hummingboard.dtsi | 6 ++--- .../dts/nxp/imx/imx6qdl-hummingboard2.dtsi | 10 +++---- .../boot/dts/nxp/imx/imx6qdl-icore-rqs.dtsi | 2 +- .../dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi | 6 ++--- arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi | 2 +- .../boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi | 4 +-- .../dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi | 8 +++--- .../dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi | 8 +++--- .../boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi | 8 +++--- .../imx/imx6qdl-phytec-mira-peb-wlbt-05.dtsi | 2 +- .../boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi | 10 +++---- .../dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi | 4 +-- arch/arm/boot/dts/nxp/imx/imx6qdl-pico.dtsi | 4 +-- arch/arm/boot/dts/nxp/imx/imx6qdl-prti6q.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi | 4 +-- .../boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi | 8 +++--- .../boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi | 6 ++--- .../arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi | 10 +++---- .../boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi | 6 ++--- .../boot/dts/nxp/imx/imx6qdl-sr-som-brcm.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx6qdl-ts4900.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi | 8 +++--- arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi | 12 ++++----- arch/arm/boot/dts/nxp/imx/imx6qdl-udoo.dtsi | 2 +- .../boot/dts/nxp/imx/imx6qdl-var-dart.dtsi | 2 +- .../arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi | 2 +- .../dts/nxp/imx/imx6qdl-wandboard-revd1.dtsi | 2 +- .../boot/dts/nxp/imx/imx6qdl-wandboard.dtsi | 2 +- .../boot/dts/nxp/imx/imx6qdl-zii-rdu2.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx6qp-prtwd3.dts | 2 +- arch/arm/boot/dts/nxp/imx/imx6sl-evk.dts | 6 ++--- .../boot/dts/nxp/imx/imx6sl-kobo-aura2.dts | 2 +- .../dts/nxp/imx/imx6sl-tolino-shine2hd.dts | 4 +-- .../boot/dts/nxp/imx/imx6sl-tolino-vision.dts | 4 +-- arch/arm/boot/dts/nxp/imx/imx6sll-evk.dts | 10 +++---- .../boot/dts/nxp/imx/imx6sx-nitrogen6sx.dts | 8 +++--- .../arm/boot/dts/nxp/imx/imx6sx-sabreauto.dts | 8 +++--- arch/arm/boot/dts/nxp/imx/imx6sx-sdb-reva.dts | 4 +-- arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dts | 2 +- arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi | 14 +++++----- .../nxp/imx/imx6sx-softing-vining-2000.dts | 2 +- .../arm/boot/dts/nxp/imx/imx6sx-udoo-neo.dtsi | 8 +++--- .../boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi | 4 +-- .../dts/nxp/imx/imx6ul-ccimx6ulsbcpro.dts | 2 +- .../nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi | 4 +-- .../dts/nxp/imx/imx6ul-kontron-bl-common.dtsi | 2 +- .../arm/boot/dts/nxp/imx/imx6ul-liteboard.dts | 2 +- .../imx/imx6ul-phytec-segin-peb-av-02.dtsi | 2 +- .../imx/imx6ul-phytec-segin-peb-wlbt-05.dtsi | 2 +- .../boot/dts/nxp/imx/imx6ul-phytec-segin.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi | 6 ++--- arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi | 10 +++---- .../dts/nxp/imx/imx6ull-colibri-aster.dtsi | 2 +- .../dts/nxp/imx/imx6ull-colibri-eval-v3.dtsi | 2 +- .../dts/nxp/imx/imx6ull-colibri-iris-v2.dtsi | 2 +- .../dts/nxp/imx/imx6ull-colibri-iris.dtsi | 2 +- .../boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx6ull-jozacp.dts | 2 +- .../dts/nxp/imx/imx6ull-phytec-tauri.dtsi | 6 ++--- .../dts/nxp/imx/imx6ull-tarragon-master.dts | 2 +- .../dts/nxp/imx/imx6ull-tarragon-slavext.dts | 2 +- .../dts/nxp/imx/imx7-colibri-iris-v2.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx7-colibri.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi | 16 ++++++------ .../boot/dts/nxp/imx/imx7d-cl-som-imx7.dts | 2 +- .../dts/nxp/imx/imx7d-flex-concentrator.dts | 2 +- arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts | 4 +-- arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts | 8 +++--- arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi | 6 ++--- .../boot/dts/nxp/imx/imx7d-remarkable2.dts | 6 ++--- arch/arm/boot/dts/nxp/imx/imx7d-sdb-reva.dts | 2 +- arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts | 14 +++++----- arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts | 10 +++---- arch/arm/boot/dts/nxp/imx/imx7d-zii-rpu2.dts | 4 +-- arch/arm/boot/dts/nxp/imx/imx7s-warp.dts | 4 +-- arch/arm/boot/dts/nxp/imx/imx7ulp-evk.dts | 4 +-- arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi | 6 ++--- arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dts | 6 ++--- arch/arm/boot/dts/nxp/mxs/imx23-evk.dts | 4 +-- arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts | 2 +- arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts | 8 +++--- .../boot/dts/nxp/mxs/imx23-stmp378x_devb.dts | 2 +- arch/arm/boot/dts/nxp/mxs/imx23-xfi3.dts | 2 +- arch/arm/boot/dts/nxp/mxs/imx28-apf28dev.dts | 2 +- arch/arm/boot/dts/nxp/mxs/imx28-cfa10036.dts | 2 +- arch/arm/boot/dts/nxp/mxs/imx28-cfa10037.dts | 2 +- arch/arm/boot/dts/nxp/mxs/imx28-cfa10049.dts | 2 +- arch/arm/boot/dts/nxp/mxs/imx28-cfa10057.dts | 2 +- arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts | 2 +- .../dts/nxp/mxs/imx28-eukrea-mbmx28lc.dtsi | 6 ++--- arch/arm/boot/dts/nxp/mxs/imx28-evk.dts | 12 ++++----- arch/arm/boot/dts/nxp/mxs/imx28-m28cu3.dts | 6 ++--- arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dts | 6 ++--- arch/arm/boot/dts/nxp/mxs/imx28-sps1.dts | 2 +- arch/arm/boot/dts/nxp/mxs/imx28-ts4600.dts | 2 +- arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts | 10 +++---- arch/arm/boot/dts/nxp/mxs/imx28-xea.dts | 4 +-- .../boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi | 2 +- arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi | 2 +- .../boot/dts/qcom/msm8226-motorola-falcon.dts | 2 +- .../dts/qcom/qcom-apq8026-asus-sparrow.dts | 2 +- .../dts/qcom/qcom-apq8026-huawei-sturgeon.dts | 2 +- .../boot/dts/qcom/qcom-apq8026-lg-lenok.dts | 2 +- .../qcom-apq8026-samsung-matisse-wifi.dts | 2 +- .../qcom/qcom-apq8026-samsung-milletwifi.dts | 6 ++--- .../dts/qcom/qcom-apq8060-dragonboard.dts | 2 +- .../dts/qcom/qcom-apq8064-asus-nexus7-flo.dts | 2 +- .../boot/dts/qcom/qcom-apq8064-ifc6410.dts | 2 +- .../dts/qcom/qcom-apq8074-dragonboard.dts | 2 +- .../qcom-msm8226-samsung-matisse-common.dtsi | 2 +- .../dts/qcom/qcom-msm8226-samsung-ms013g.dts | 4 +-- .../qcom/qcom-msm8926-motorola-peregrine.dts | 2 +- .../qcom/qcom-msm8926-samsung-matisselte.dts | 2 +- arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts | 2 +- .../qcom-msm8974-lge-nexus5-hammerhead.dts | 4 +-- .../dts/qcom/qcom-msm8974-samsung-hlte.dts | 2 +- .../qcom/qcom-msm8974-sony-xperia-rhine.dtsi | 2 +- .../qcom/qcom-msm8974pro-fairphone-fp2.dts | 2 +- .../boot/dts/qcom/qcom-msm8974pro-htc-m8.dts | 2 +- .../qcom/qcom-msm8974pro-oneplus-bacon.dts | 2 +- .../qcom-msm8974pro-samsung-klte-common.dtsi | 4 +-- ...-msm8974pro-sony-xperia-shinano-castor.dts | 2 +- ...msm8974pro-sony-xperia-shinano-common.dtsi | 6 ++--- .../boot/dts/renesas/iwg20d-q7-common.dtsi | 4 +-- arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts | 2 +- .../dts/renesas/r8a7740-armadillo800eva.dts | 2 +- .../boot/dts/renesas/r8a7742-iwg21d-q7.dts | 4 +-- .../dts/renesas/r8a7745-iwg22d-sodimm.dts | 2 +- arch/arm/boot/dts/renesas/r8a7790-lager.dts | 4 +-- arch/arm/boot/dts/renesas/r8a7790-stout.dts | 2 +- arch/arm/boot/dts/renesas/r8a7791-koelsch.dts | 6 ++--- arch/arm/boot/dts/renesas/r8a7792-blanche.dts | 2 +- arch/arm/boot/dts/renesas/r8a7792-wheat.dts | 2 +- arch/arm/boot/dts/renesas/r8a7793-gose.dts | 6 ++--- arch/arm/boot/dts/renesas/r8a7794-alt.dts | 4 +-- arch/arm/boot/dts/renesas/r8a7794-silk.dts | 2 +- arch/arm/boot/dts/renesas/sh73a0-kzm9g.dts | 4 +-- .../boot/dts/rockchip/rk3066a-bqcurie2.dts | 2 +- .../boot/dts/rockchip/rk3066a-marsboard.dts | 2 +- arch/arm/boot/dts/rockchip/rk3066a-mk808.dts | 8 +++--- .../boot/dts/rockchip/rk3066a-rayeager.dts | 8 +++--- arch/arm/boot/dts/rockchip/rk3128-evb.dts | 4 +-- .../arm/boot/dts/rockchip/rk3128-xpi-3128.dts | 4 +-- .../boot/dts/rockchip/rk3188-bqedison2qc.dts | 10 +++---- .../boot/dts/rockchip/rk3188-radxarock.dts | 6 ++--- arch/arm/boot/dts/rockchip/rk3229-evb.dts | 2 +- arch/arm/boot/dts/rockchip/rk3229-xms6.dts | 2 +- .../boot/dts/rockchip/rk3288-evb-act8846.dts | 4 +-- arch/arm/boot/dts/rockchip/rk3288-evb.dtsi | 6 ++--- .../dts/rockchip/rk3288-firefly-reload.dts | 14 +++++----- .../arm/boot/dts/rockchip/rk3288-firefly.dtsi | 8 +++--- arch/arm/boot/dts/rockchip/rk3288-miqi.dts | 4 +-- .../boot/dts/rockchip/rk3288-phycore-rdk.dts | 6 ++--- .../arm/boot/dts/rockchip/rk3288-popmetal.dts | 4 +-- arch/arm/boot/dts/rockchip/rk3288-r89.dts | 6 ++--- .../boot/dts/rockchip/rk3288-rock2-square.dts | 6 ++--- arch/arm/boot/dts/rockchip/rk3288-tinker.dtsi | 2 +- .../boot/dts/rockchip/rk3288-veyron-brain.dts | 4 +-- .../rockchip/rk3288-veyron-chromebook.dtsi | 4 +-- .../boot/dts/rockchip/rk3288-veyron-edp.dtsi | 6 ++--- .../dts/rockchip/rk3288-veyron-fievel.dts | 10 +++---- .../boot/dts/rockchip/rk3288-veyron-jaq.dts | 4 +-- .../boot/dts/rockchip/rk3288-veyron-jerry.dts | 4 +-- .../dts/rockchip/rk3288-veyron-mickey.dts | 2 +- .../dts/rockchip/rk3288-veyron-minnie.dts | 4 +-- .../dts/rockchip/rk3288-veyron-speedy.dts | 4 +-- .../boot/dts/rockchip/rk3288-vmarc-som.dtsi | 4 +-- arch/arm/boot/dts/rockchip/rk3288-vyasa.dts | 6 ++--- .../dts/rockchip/rv1126-edgeble-neu2.dtsi | 2 +- arch/arm/boot/dts/samsung/exynos3250-monk.dts | 2 +- .../arm/boot/dts/samsung/exynos4210-i9100.dts | 12 ++++----- .../boot/dts/samsung/exynos4210-origen.dts | 2 +- .../arm/boot/dts/samsung/exynos4210-trats.dts | 12 ++++----- .../dts/samsung/exynos4210-universal_c210.dts | 6 ++--- .../arm/boot/dts/samsung/exynos4212-tab3.dtsi | 4 +-- .../dts/samsung/exynos4412-galaxy-s3.dtsi | 12 ++++----- .../boot/dts/samsung/exynos4412-midas.dtsi | 8 +++--- .../arm/boot/dts/samsung/exynos4412-n710x.dts | 8 +++--- .../boot/dts/samsung/exynos4412-odroidu3.dts | 2 +- .../boot/dts/samsung/exynos4412-odroidx.dts | 2 +- .../boot/dts/samsung/exynos4412-origen.dts | 2 +- .../dts/samsung/exynos5250-snow-common.dtsi | 2 +- .../boot/dts/samsung/exynos5420-peach-pit.dts | 4 +-- .../boot/dts/samsung/exynos5420-smdk5420.dts | 4 +-- .../dts/samsung/exynos5422-samsung-k3g.dts | 2 +- .../boot/dts/samsung/exynos5800-peach-pi.dts | 4 +-- arch/arm/boot/dts/samsung/s5pv210-aquila.dts | 2 +- arch/arm/boot/dts/samsung/s5pv210-aries.dtsi | 6 ++--- .../boot/dts/samsung/s5pv210-fascinate4g.dts | 4 +-- arch/arm/boot/dts/samsung/s5pv210-galaxys.dts | 2 +- arch/arm/boot/dts/samsung/s5pv210-goni.dts | 4 +-- arch/arm/boot/dts/st/ste-snowball.dts | 2 +- .../dts/st/ste-ux500-samsung-codina-tmo.dts | 4 +-- .../boot/dts/st/ste-ux500-samsung-codina.dts | 10 +++---- .../boot/dts/st/ste-ux500-samsung-gavini.dts | 12 ++++----- .../boot/dts/st/ste-ux500-samsung-golden.dts | 8 +++--- .../boot/dts/st/ste-ux500-samsung-janice.dts | 16 ++++++------ .../boot/dts/st/ste-ux500-samsung-kyle.dts | 8 +++--- .../boot/dts/st/ste-ux500-samsung-skomer.dts | 4 +-- arch/arm/boot/dts/st/stm32f429-disco.dts | 2 +- arch/arm/boot/dts/st/stm32f469-disco.dts | 2 +- arch/arm/boot/dts/st/stm32f746-disco.dts | 2 +- arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts | 4 +-- ...157a-microgea-stm32mp1-microdev2.0-of7.dts | 4 +-- .../boot/dts/st/stm32mp157c-lxa-tac-gen1.dts | 2 +- .../boot/dts/st/stm32mp157c-lxa-tac-gen2.dts | 2 +- .../boot/dts/st/stm32mp15xx-dhcom-som.dtsi | 2 +- .../dts/st/stm32mp15xx-dhcor-avenger96.dtsi | 2 +- .../dts/st/stm32mp15xx-dhcor-drc-compact.dtsi | 2 +- .../dts/synaptics/berlin2q-marvell-dmp.dts | 8 +++--- arch/arm/boot/dts/ti/davinci/da850-evm.dts | 2 +- .../boot/dts/ti/davinci/da850-lego-ev3.dts | 4 +-- .../boot/dts/ti/keystone/keystone-k2g-ice.dts | 2 +- arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi | 2 +- .../dts/ti/omap/am335x-boneblack-wireless.dts | 2 +- arch/arm/boot/dts/ti/omap/am335x-boneblue.dts | 2 +- .../dts/ti/omap/am335x-bonegreen-wireless.dts | 2 +- arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts | 2 +- arch/arm/boot/dts/ti/omap/am335x-evm.dts | 2 +- arch/arm/boot/dts/ti/omap/am335x-evmsk.dts | 4 +-- arch/arm/boot/dts/ti/omap/am335x-icev2.dts | 2 +- arch/arm/boot/dts/ti/omap/am3517-som.dtsi | 4 +-- arch/arm/boot/dts/ti/omap/am437x-gp-evm.dts | 4 +-- arch/arm/boot/dts/ti/omap/am437x-sk-evm.dts | 2 +- .../dts/ti/omap/am57xx-beagle-x15-common.dtsi | 2 +- arch/arm/boot/dts/ti/omap/dm8148-t410.dts | 2 +- arch/arm/boot/dts/ti/omap/dra7-evm.dts | 6 ++--- .../boot/dts/ti/omap/dra72-evm-common.dtsi | 4 +-- arch/arm/boot/dts/ti/omap/dra76-evm.dts | 4 +-- arch/arm/boot/dts/ti/omap/logicpd-som-lv.dtsi | 2 +- .../ti/omap/logicpd-torpedo-37xx-devkit.dts | 2 +- .../dts/ti/omap/motorola-mapphone-common.dtsi | 4 +-- .../dts/ti/omap/motorola-mapphone-xt8xx.dtsi | 2 +- arch/arm/boot/dts/ti/omap/omap3-beagle-xm.dts | 2 +- arch/arm/boot/dts/ti/omap/omap3-beagle.dts | 2 +- arch/arm/boot/dts/ti/omap/omap3-cm-t3517.dts | 2 +- arch/arm/boot/dts/ti/omap/omap3-cm-t3530.dts | 2 +- arch/arm/boot/dts/ti/omap/omap3-cm-t3730.dts | 2 +- .../boot/dts/ti/omap/omap3-evm-common.dtsi | 6 ++--- arch/arm/boot/dts/ti/omap/omap3-gta04a5.dts | 2 +- .../dts/ti/omap/omap3-igep0020-common.dtsi | 2 +- .../boot/dts/ti/omap/omap3-igep0020-rev-f.dts | 2 +- .../boot/dts/ti/omap/omap3-igep0030-rev-g.dts | 2 +- arch/arm/boot/dts/ti/omap/omap3-n950-n9.dtsi | 4 +-- .../boot/dts/ti/omap/omap3-overo-base.dtsi | 6 ++--- .../dts/ti/omap/omap3-pandora-common.dtsi | 6 ++--- arch/arm/boot/dts/ti/omap/omap3-sb-t35.dtsi | 2 +- arch/arm/boot/dts/ti/omap/omap3-tao3530.dtsi | 4 +-- arch/arm/boot/dts/ti/omap/omap3-zoom3.dts | 2 +- arch/arm/boot/dts/ti/omap/omap4-duovero.dtsi | 2 +- .../boot/dts/ti/omap/omap4-epson-embt2ws.dts | 2 +- .../boot/dts/ti/omap/omap4-panda-common.dtsi | 4 +-- arch/arm/boot/dts/ti/omap/omap4-sdp.dts | 4 +-- .../dts/ti/omap/omap4-var-som-om44-wlan.dtsi | 2 +- .../boot/dts/ti/omap/omap5-board-common.dtsi | 2 +- arch/arm/boot/dts/ti/omap/omap5-cm-t54.dts | 4 +-- 519 files changed, 1101 insertions(+), 1101 deletions(-)