new file mode 100755
@@ -0,0 +1,20 @@
+#!/bin/bash
+# SPDX-License-Identifier: LGPL-2.1
+#
+# Copyright (c) 2023 Daniel Wagner, SUSE LLC
+
+for section in 1 3 5; do
+ while IFS= read -r -d '' man; do
+ [ ! -d "${DESTDIR}@MANDIR@/man${section}" ] && install -d "${DESTDIR}@MANDIR@/man${section}"
+
+ echo Installing "${man}" to "${DESTDIR}@MANDIR@/man${section}"
+ install -m 0644 "${man}" "${DESTDIR}@MANDIR@/man${section}/"
+ done< <(find "@SRCDIR@" -name "*\.${section}" -type f -print0)
+done
+
+while IFS= read -r -d '' html; do
+ [ ! -d "${DESTDIR}@HTMLDIR@" ] && install -d "${DESTDIR}@HTMLDIR@"
+
+ echo Installing "${html}" to "${DESTDIR}@HTMLDIR@"
+ install -m 0644 "${html}" "${DESTDIR}@HTMLDIR@"
+done< <(find "@SRCDIR@" -name "*\.html" -type f -print0)
new file mode 100644
@@ -0,0 +1,187 @@
+# SPDX-License-Identifier: LGPL-2.1
+#
+# Copyright (c) 2023 Daniel Wagner, SUSE LLC
+
+# input text file: man page section
+
+sources = {
+ 'trace-cmd.1.txt': '1',
+ 'trace-cmd-agent.1.txt': '1',
+ 'trace-cmd-check-events.1.txt': '1',
+ 'trace-cmd-clear.1.txt': '1',
+ 'trace-cmd-convert.1.txt': '1',
+ 'trace-cmd.dat.v6.5.txt': '5',
+ 'trace-cmd.dat.v7.5.txt': '5',
+ 'trace-cmd-dump.1.txt': '1',
+ 'trace-cmd-extract.1.txt': '1',
+ 'trace-cmd-hist.1.txt': '1',
+ 'trace-cmd-list.1.txt': '1',
+ 'trace-cmd-listen.1.txt': '1',
+ 'trace-cmd-mem.1.txt': '1',
+ 'trace-cmd-options.1.txt': '1',
+ 'trace-cmd-profile.1.txt': '1',
+ 'trace-cmd-record.1.txt': '1',
+ 'trace-cmd-report.1.txt': '1',
+ 'trace-cmd-reset.1.txt': '1',
+ 'trace-cmd-restore.1.txt': '1',
+ 'trace-cmd-set.1.txt': '1',
+ 'trace-cmd-show.1.txt': '1',
+ 'trace-cmd-snapshot.1.txt': '1',
+ 'trace-cmd-split.1.txt': '1',
+ 'trace-cmd-stack.1.txt': '1',
+ 'trace-cmd-start.1.txt': '1',
+ 'trace-cmd-stat.1.txt': '1',
+ 'trace-cmd-stop.1.txt': '1',
+ 'trace-cmd-stream.1.txt': '1',
+}
+
+confdir = meson.current_source_dir() + '/../'
+top_source_dir = meson.current_source_dir() + '/../../'
+
+#
+# For asciidoc ...
+# -7.1.2, no extra settings are needed.
+# 8.0-, set ASCIIDOC8.
+#
+
+#
+# For docbook-xsl ...
+# -1.68.1, set ASCIIDOC_NO_ROFF? (based on changelog from 1.73.0)
+# 1.69.0, no extra settings are needed?
+# 1.69.1-1.71.0, set DOCBOOK_SUPPRESS_SP?
+# 1.71.1, no extra settings are needed?
+# 1.72.0, set DOCBOOK_XSL_172.
+# 1.73.0-, set ASCIIDOC_NO_ROFF
+#
+
+#
+# If you had been using DOCBOOK_XSL_172 in an attempt to get rid
+# of 'the ".ft C" problem' in your generated manpages, and you
+# instead ended up with weird characters around callouts, try
+# using ASCIIDOC_NO_ROFF instead (it works fine with ASCIIDOC8).
+#
+
+if get_option('asciidoctor')
+ asciidoc = find_program('asciidoctor')
+ asciidoc_extra = ['-a', 'compat-mode']
+ asciidoc_extra += ['-I.']
+ asciidoc_extra += ['-r', 'asciidoctor-extensions']
+ asciidoc_extra += ['-a', 'mansource=libtraceevent']
+ asciidoc_extra += ['-a', 'manmanual="libtraceevent Manual"']
+ asciidoc_html = 'xhtml5'
+else
+ asciidoc = find_program('asciidoc')
+ asciidoc_extra = ['--unsafe']
+ asciidoc_extra += ['-f', confdir + 'asciidoc.conf']
+ asciidoc_html = 'xhtml11'
+
+ r = run_command(asciidoc, '--version', check: true)
+ v = r.stdout().strip()
+ if v.version_compare('>=8.0')
+ asciidoc_extra += ['-a', 'asciidoc7compatible']
+ endif
+endif
+
+manpage_xsl = confdir + 'manpage-normal.xsl'
+
+if get_option('docbook-xls-172')
+ asciidoc_extra += ['-a', 'libtraceevent-asciidoc-no-roff']
+ manpage_xsl = confdir + 'manpage-1.72.xsl'
+elif get_option('asciidoc-no-roff')
+ # docbook-xsl after 1.72 needs the regular XSL, but will not
+ # pass-thru raw roff codes from asciidoc.conf, so turn them off.
+ asciidoc_extra += ['-a', 'libtraceevent-asciidoc-no-roff']
+endif
+
+xmlto = find_program('xmlto')
+xmlto_extra = []
+
+if get_option('man-bold-literal')
+ xmlto_extra += ['-m ', confdir + 'manpage-bold-literal.xsl']
+endif
+
+if get_option('docbook-suppress-sp')
+ xmlto_extra += ['-m ', confdir + 'manpage-suppress-sp.xsl']
+endif
+
+check_doc = custom_target(
+ 'check-doc',
+ output: 'dummy',
+ command : [
+ top_source_dir + 'check-manpages.sh',
+ meson.current_source_dir()])
+
+gen = generator(
+ asciidoc,
+ output: '@BASENAME@.xml',
+ arguments: [
+ '-b', 'docbook',
+ '-d', 'manpage',
+ '-a', 'libtraceevent_version=' + meson.project_version(),
+ '-o', '@OUTPUT@']
+ + asciidoc_extra
+ + ['@INPUT@'])
+
+man = []
+html = []
+foreach txt, section : sources
+ # build man page(s)
+ xml = gen.process(txt)
+ man += custom_target(
+ txt.underscorify() + '_man',
+ input: xml,
+ output: '@BASENAME@.' + section,
+ depends: check_doc,
+ command: [
+ xmlto,
+ '-m', manpage_xsl,
+ 'man',
+ '-o', '@OUTPUT@']
+ + xmlto_extra
+ + ['@INPUT@'])
+
+ # build html pages
+ html += custom_target(
+ txt.underscorify() + '_html',
+ input: txt,
+ output: '@BASENAME@.html',
+ depends: check_doc,
+ command: [
+ asciidoc,
+ '-b', asciidoc_html,
+ '-d', 'manpage',
+ '-a', 'libtraceevent_version=' + meson.project_version(),
+ '-o', '@OUTPUT@']
+ + asciidoc_extra
+ + ['@INPUT@'])
+endforeach
+
+# Install path workaround because:
+#
+# - xmlto might generate more than one file and we would to tell meson
+# about those output files. We could figure out which files are generated
+# (see sed match in check-manpages.sh).
+#
+# - The man page generation puts all the generated files under sub dirs
+# and it's not obvious how to tell Meson it should not do this without
+# causing the install step to fail (confusion where the generated files
+# are stored)
+#
+# - The documentation build is not part of the 'build' target. The user
+# has explicitly to trigger the doc build. Hence the documentation is
+# not added to the 'install' target.
+#
+# Thus just use a plain old shell script to move the generated files to the
+# right location.
+
+conf = configuration_data()
+conf.set('SRCDIR', meson.current_build_dir())
+conf.set('MANDIR', mandir)
+conf.set('HTMLDIR', htmldir)
+configure_file(
+ input: 'install-docs.sh.in',
+ output: 'install-docs.sh',
+ configuration: conf)
+
+meson.add_install_script(
+ join_paths(meson.current_build_dir(), 'install-docs.sh'))
new file mode 100755
@@ -0,0 +1,17 @@
+#!/usr/bin/env bash
+# SPDX-License-Identifier: LGPL-2.1-or-later
+
+set -eu
+set -o pipefail
+
+dir="${1:?}"
+fallback="${2:?}"
+
+# Apparently git describe has a bug where it always considers the work-tree
+# dirty when invoked with --git-dir (even though 'git status' is happy). Work
+# around this issue by cd-ing to the source directory.
+cd "$dir"
+# Check that we have either .git/ (a normal clone) or a .git file (a work-tree)
+# and that we don't get confused if a tarball is extracted in a higher-level
+# git repository.
+[ -e .git ] && git describe --abbrev=7 --dirty=+ 2>/dev/null | sed 's/^v//' || echo "$fallback"
new file mode 100644
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2023 Daniel Wagner, SUSE LLC
+
+project(
+ 'trace-cmd', ['c'],
+ meson_version: '>= 0.50.0',
+ license: 'GPL-2.0',
+ version: '3.1.5',
+ default_options: [
+ 'c_std=gnu99',
+ 'buildtype=debug',
+ 'default_library=both',
+ 'prefix=/usr/local',
+ 'warning_level=1'])
+
+cc = meson.get_compiler('c')
+
+prefixdir = get_option('prefix')
+datadir = join_paths(prefixdir, get_option('datadir'))
+bindir = join_paths(prefixdir, get_option('bindir'))
+mandir = join_paths(prefixdir, get_option('mandir'))
+htmldir = join_paths(prefixdir, get_option('htmldir'))
+
+conf = configuration_data()
+
+libtraceevent_dep = dependency('libtraceevent', version: '>= 1.5.0', required: true)
+libtracefs_dep = dependency('libtracefs', version: '>= 1.6.0', required: true)
+
+zlib_dep = dependency('zlib', required: false)
+conf.set('HAVE_ZLIB', zlib_dep.found(), description: 'Is zlib avialable?')
+
+libzstd_dep = dependency('libzstd', version: '>= 1.4.0', required: false)
+conf.set('HAVE_ZSTD', libzstd_dep.found(), description: 'Is libzstd available?')
+
+cunit_dep = dependency('cunit', required : false)
+
+vsock_defined = get_option('vsock') and cc.has_header('linux/vm_sockets.h')
+conf.set('VSOCK', vsock_defined, description: 'Is vsock available?')
+
+perf_defined = cc.has_header('linux/perf_event.h')
+conf.set('PERF', perf_defined, description: 'Is perf available?')
+
+have_ptrace = get_option('ptrace') and cc.compiles(
+ '''
+ #include <stdio.h>
+ #include <sys/ptrace.h>
+
+ int main (void)
+ {
+ int ret;
+ ret = ptrace(PTRACE_ATTACH, 0, NULL, 0);
+ ptrace(PTRACE_TRACEME, 0, NULL, 0);
+ ptrace(PTRACE_GETSIGINFO, 0, NULL, NULL);
+ ptrace(PTRACE_GETEVENTMSG, 0, NULL, NULL);
+ ptrace(PTRACE_SETOPTIONS, NULL, NULL,
+ PTRACE_O_TRACEFORK |
+ PTRACE_O_TRACEVFORK |
+ PTRACE_O_TRACECLONE |
+ PTRACE_O_TRACEEXIT);
+ ptrace(PTRACE_CONT, NULL, NULL, 0);
+ ptrace(PTRACE_DETACH, 0, NULL, NULL);
+ ptrace(PTRACE_SETOPTIONS, 0, NULL,
+ PTRACE_O_TRACEFORK |
+ PTRACE_O_TRACEVFORK |
+ PTRACE_O_TRACECLONE |
+ PTRACE_O_TRACEEXIT);
+ return ret;
+ }
+ ''',
+ name: 'ptrace')
+if not have_ptrace
+ conf.set10('NO_PTRACE', true, description: 'Is ptrace missing?')
+ conf.set('WARN_NO_PTRACE', true, description: 'Issue no ptrace warning?')
+endif
+
+audit_dep = dependency('audit', required: false)
+if not audit_dep.found()
+ conf.set10('NO_AUDIT', true, description: 'Is audit missing?')
+ conf.set('WARN_NO_AUDIT', true, description: 'Issue no audit warning?')
+endif
+
+config_h = configure_file(
+ output: 'config.h',
+ configuration: conf
+)
+
+version = meson.project_version().split('.')
+
+vconf = configuration_data()
+vconf.set('VERSION_CODE', version[0].to_int() * 256 + version[1].to_int())
+vconf.set('EXTRAVERSION', '"@0@"'.format(version[2]))
+vconf.set('FILE_VERSION', '""')
+vconf.set('VERSION_STRING', '"@0@"'.format(meson.project_version()))
+
+version_tag = get_option('version-tag')
+if version_tag != ''
+ vconf.set('VERSION_GIT', '"@0@"'.format(version_tag))
+else
+ r = run_command(
+ 'meson-vcs-tag.sh',
+ meson.current_source_dir(),
+ meson.project_version(),
+ check: true)
+ vconf.set('VERSION_GIT', '"@0@"'.format(r.stdout().strip()))
+endif
+version_h = configure_file(
+ output: 'tc_version.h',
+ configuration: vconf)
+
+add_project_arguments(
+ [
+ '-D_GNU_SOURCE',
+ '-include', 'config.h',
+ ],
+ language : 'c')
+
+incdir = include_directories(['.', 'include'])
+
+# libtracecmd: trace-cmd currently depends on a statically linked
+# libtracecmd. libtracecmd is sill very strongly coupled with
+# trace-cmd (or the other way around). To reduce the development setup
+# complexity we add some of the 'top meson.build' from libtracecmd and
+# make it simpler to use.
+library_version = '1.3.0'
+libtracecmd_standalone_build = false
+libtracecmd_ext_incdir = include_directories(
+ [
+ 'include',
+ 'include/trace-cmd',
+ 'tracecmd/include'
+ ])
+subdir('lib/trace-cmd/include')
+subdir('lib/trace-cmd/include/private')
+subdir('lib/trace-cmd')
+
+# trace-cmd
+subdir('tracecmd')
+subdir('python')
+if cunit_dep.found()
+ subdir('utest')
+endif
+subdir('Documentation/trace-cmd')
+
+custom_target(
+ 'docs',
+ output: 'docs',
+ depends: [html, man],
+ command: ['echo'])
new file mode 100644
@@ -0,0 +1,23 @@
+# -*- mode: meson -*-
+# SPDX-License-Identifier: GPL-2.0
+
+option('version-tag', type : 'string',
+ description : 'override the git version string')
+option('vsock', type : 'boolean', value : true,
+ description : 'build with vsock support')
+option('ptrace', type : 'boolean', value : true,
+ description : 'build with ptrace support')
+option('htmldir', type : 'string', value : 'share/doc/trace-cmd-doc',
+ description : 'directory for HTML documentation')
+option('asciidoctor', type : 'boolean', value: false,
+ description : 'use asciidoctor instead of asciidoc')
+option('docbook-xls-172', type : 'boolean', value : false,
+ description : 'enable docbook XLS 172 workaround')
+option('asciidoc-no-roff', type : 'boolean', value : false,
+ description : 'enable no roff workaround')
+option('man-bold-literal', type : 'boolean', value : false,
+ description : 'enable bold literals')
+option('docbook-suppress-sp', type : 'boolean', value : false,
+ description : 'docbook suppress sp')
+option('python', type : 'combo', choices : ['auto', 'true', 'false'],
+ description : 'Generate trac-cmd Python bindings')
new file mode 100644
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2023 Daniel Wagner, SUSE LLC
+
+want_python = get_option('python')
+if want_python != 'false'
+ python3 = import('python').find_installation('python3')
+ py3_dep = python3.dependency(required: want_python == 'true')
+ swig = find_program('swig', required: want_python == 'true')
+ header_found = cc.has_header('Python.h', dependencies: py3_dep)
+ have_python_support = py3_dep.found() and swig.found() and header_found
+else
+ have_python_support = false
+endif
+
+if have_python_support
+ pymod_swig = custom_target(
+ 'ctracecmd.py',
+ input: ['ctracecmd.i'],
+ output: ['ctracecmd.py', 'ctracecmd_wrap.c'],
+ command: [
+ swig,
+ '-python',
+ '-I' + meson.current_source_dir() + '/../include/trace-cmd',
+ '-I' + libtraceevent_dep.get_pkgconfig_variable('prefix') + '/include/traceevent',
+ '-o', '@OUTPUT1@',
+ '@INPUT0@'],
+ install: true,
+ install_dir: [ python3.get_install_dir(pure: false, subdir: 'trace-cmd'), false])
+
+ incdir_py = include_directories(['.', '../include/trace-cmd'])
+
+ pyctracecmd_clib = python3.extension_module(
+ '_ctracecmd',
+ pymod_swig[1],
+ dependencies : [libtraceevent_dep, libtracefs_dep, py3_dep],
+ include_directories: [incdir, incdir_py],
+ install: true,
+ subdir: 'trace-cmd')
+endif
new file mode 100644
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2023 Daniel Wagner, SUSE LLC
+
+sources = [
+ 'trace-agent.c',
+ 'trace-check-events.c',
+ 'trace-clear.c',
+ 'trace-cmd.c',
+ 'trace-convert.c',
+ 'trace-dump.c',
+ 'trace-hist.c',
+ 'trace-list.c',
+ 'trace-listen.c',
+ 'trace-mem.c',
+ 'trace-profile.c',
+ 'trace-read.c',
+ 'trace-record.c',
+ 'trace-restore.c',
+ 'trace-setup-guest.c',
+ 'trace-show.c',
+ 'trace-snapshot.c',
+ 'trace-split.c',
+ 'trace-stack.c',
+ 'trace-stat.c',
+ 'trace-stream.c',
+ 'trace-tsync.c',
+ 'trace-usage.c',
+ 'trace-vm.c',
+]
+
+if vsock_defined
+ sources += 'trace-vsock.c'
+endif
+
+trace_cmd_incdir = include_directories(['.', 'include'])
+
+executable(
+ 'trace-cmd',
+ sources,
+ dependencies: [
+ libtraceevent_dep,
+ libtracefs_dep,
+ zlib_dep,
+ libzstd_dep,
+ audit_dep],
+ include_directories: [
+ incdir,
+ trace_cmd_incdir,
+ libtracecmd_incdir,
+ libtracecmd_private_incdir,
+ libtracecmd_ext_incdir],
+ link_with: [static_libtracecmd],
+ install: true,
+ install_dir: bindir)
+
+install_data(
+ 'trace-cmd.bash',
+ install_dir: datadir + '/bash-completion/completions')
new file mode 100644
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2023 Daniel Wagner, SUSE LLC
+
+sources = [
+ 'tracecmd-utest.c',
+ 'trace-utest.c',
+]
+
+e = executable(
+ 'trace-utest',
+ sources,
+ include_directories: [
+ incdir,
+ libtracecmd_incdir,
+ libtracecmd_private_incdir,
+ libtracecmd_ext_incdir],
+ dependencies: [
+ libtraceevent_dep,
+ libtracefs_dep,
+ zlib_dep,
+ libzstd_dep,
+ cunit_dep],
+ link_with: [static_libtracecmd])
+
+test('trace-utest', e)
Add support for building the project with meson. trace-cmd depends on a statically linked libtracecmd (e.g. trace_perf_open, trace_perf_close, trace_perf_init). Instead depending libtracecmd to be compiled and installed separately add libtracecmd directly to trace-cmd build. This avoids an additional step. We still are able to build libtracecmd as stand alone project. The top meson.build file just lives in the lib directory. Signed-off-by: Daniel Wagner <dwagner@suse.de> --- Documentation/trace-cmd/install-docs.sh.in | 20 +++ Documentation/trace-cmd/meson.build | 187 +++++++++++++++++++++ meson-vcs-tag.sh | 17 ++ meson.build | 149 ++++++++++++++++ meson_options.txt | 23 +++ python/meson.build | 40 +++++ tracecmd/meson.build | 59 +++++++ utest/meson.build | 26 +++ 8 files changed, 521 insertions(+) create mode 100755 Documentation/trace-cmd/install-docs.sh.in create mode 100644 Documentation/trace-cmd/meson.build create mode 100755 meson-vcs-tag.sh create mode 100644 meson.build create mode 100644 meson_options.txt create mode 100644 python/meson.build create mode 100644 tracecmd/meson.build create mode 100644 utest/meson.build