new file mode 100755
@@ -0,0 +1,20 @@
+#!/bin/bash
+# SPDX-License-Identifier: LGPL-2.1
+#
+# Copyright (c) 2023 Daniel Wagner, SUSE LLC
+
+for section in 1 3 5; do
+ while IFS= read -r -d '' man; do
+ [ ! -d "${DESTDIR}@MANDIR@/man${section}" ] && install -d "${DESTDIR}@MANDIR@/man${section}"
+
+ echo Installing "${man}" to "${DESTDIR}@MANDIR@/man${section}"
+ install -m 0644 "${man}" "${DESTDIR}@MANDIR@/man${section}/"
+ done< <(find "@SRCDIR@" -name "*\.${section}" -type f -print0)
+done
+
+while IFS= read -r -d '' html; do
+ [ ! -d "${DESTDIR}@HTMLDIR@" ] && install -d "${DESTDIR}@HTMLDIR@"
+
+ echo Installing "${html}" to "${DESTDIR}@HTMLDIR@"
+ install -m 0644 "${html}" "${DESTDIR}@HTMLDIR@"
+done< <(find "@SRCDIR@" -name "*\.html" -type f -print0)
new file mode 100644
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: LGPL-2.1
+#
+# Copyright (c) 2023 Daniel Wagner, SUSE LLC
+
+# input text file: man page section
+
+sources = {
+ 'libtracecmd-files.txt': '3',
+ 'libtracecmd-instances.txt': '3',
+ 'libtracecmd-iterate.txt': '3',
+ 'libtracecmd-log.txt': '3',
+ 'libtracecmd-maps.txt': '3',
+ 'libtracecmd-peer.txt': '3',
+ 'libtracecmd-record.txt': '3',
+ 'libtracecmd-timestamp.txt': '3',
+ 'libtracecmd.txt': '3',
+}
+
+confdir = meson.current_source_dir() + '/../'
+top_source_dir = meson.current_source_dir() + '/../../'
+
+#
+# For asciidoc ...
+# -7.1.2, no extra settings are needed.
+# 8.0-, set ASCIIDOC8.
+#
+
+#
+# For docbook-xsl ...
+# -1.68.1, set ASCIIDOC_NO_ROFF? (based on changelog from 1.73.0)
+# 1.69.0, no extra settings are needed?
+# 1.69.1-1.71.0, set DOCBOOK_SUPPRESS_SP?
+# 1.71.1, no extra settings are needed?
+# 1.72.0, set DOCBOOK_XSL_172.
+# 1.73.0-, set ASCIIDOC_NO_ROFF
+#
+
+#
+# If you had been using DOCBOOK_XSL_172 in an attempt to get rid
+# of 'the ".ft C" problem' in your generated manpages, and you
+# instead ended up with weird characters around callouts, try
+# using ASCIIDOC_NO_ROFF instead (it works fine with ASCIIDOC8).
+#
+
+if get_option('asciidoctor')
+ asciidoc = find_program('asciidoctor')
+ asciidoc_extra = ['-a', 'compat-mode']
+ asciidoc_extra += ['-I.']
+ asciidoc_extra += ['-r', 'asciidoctor-extensions']
+ asciidoc_extra += ['-a', 'mansource=libtraceevent']
+ asciidoc_extra += ['-a', 'manmanual="libtraceevent Manual"']
+ asciidoc_html = 'xhtml5'
+else
+ asciidoc = find_program('asciidoc')
+ asciidoc_extra = ['--unsafe']
+ asciidoc_extra += ['-f', confdir + 'asciidoc.conf']
+ asciidoc_html = 'xhtml11'
+
+ r = run_command(asciidoc, '--version', check: true)
+ v = r.stdout().strip()
+ if v.version_compare('>=8.0')
+ asciidoc_extra += ['-a', 'asciidoc7compatible']
+ endif
+endif
+
+manpage_xsl = confdir + 'manpage-normal.xsl'
+
+if get_option('docbook-xls-172')
+ asciidoc_extra += ['-a', 'libtraceevent-asciidoc-no-roff']
+ manpage_xsl = confdir + 'manpage-1.72.xsl'
+elif get_option('asciidoc-no-roff')
+ # docbook-xsl after 1.72 needs the regular XSL, but will not
+ # pass-thru raw roff codes from asciidoc.conf, so turn them off.
+ asciidoc_extra += ['-a', 'libtraceevent-asciidoc-no-roff']
+endif
+
+xmlto = find_program('xmlto')
+xmlto_extra = []
+
+if get_option('man-bold-literal')
+ xmlto_extra += ['-m ', confdir + 'manpage-bold-literal.xsl']
+endif
+
+if get_option('docbook-suppress-sp')
+ xmlto_extra += ['-m ', confdir + 'manpage-suppress-sp.xsl']
+endif
+
+check_doc = custom_target(
+ 'check-doc',
+ output: 'dummy',
+ command : [
+ top_source_dir + 'check-manpages.sh',
+ meson.current_source_dir()])
+
+gen = generator(
+ asciidoc,
+ output: '@BASENAME@.xml',
+ arguments: [
+ '-b', 'docbook',
+ '-d', 'manpage',
+ '-a', 'libtraceevent_version=' + meson.project_version(),
+ '-o', '@OUTPUT@']
+ + asciidoc_extra
+ + ['@INPUT@'])
+
+man = []
+html = []
+foreach txt, section : sources
+ # build man page(s)
+ xml = gen.process(txt)
+ man += custom_target(
+ txt.underscorify() + '_man',
+ input: xml,
+ output: '@BASENAME@.' + section,
+ depends: check_doc,
+ command: [
+ xmlto,
+ '-m', manpage_xsl,
+ 'man',
+ '-o', '@OUTPUT@']
+ + xmlto_extra
+ + ['@INPUT@'])
+
+ # build html pages
+ html += custom_target(
+ txt.underscorify() + '_html',
+ input: txt,
+ output: '@BASENAME@.html',
+ depends: check_doc,
+ command: [
+ asciidoc,
+ '-b', asciidoc_html,
+ '-d', 'manpage',
+ '-a', 'libtraceevent_version=' + meson.project_version(),
+ '-o', '@OUTPUT@']
+ + asciidoc_extra
+ + ['@INPUT@'])
+endforeach
+
+# Install path workaround because:
+#
+# - xmlto might generate more than one file and we would to tell meson
+# about those output files. We could figure out which files are generated
+# (see sed match in check-manpages.sh).
+#
+# - The man page generation puts all the generated files under sub dirs
+# and it's not obvious how to tell Meson it should not do this without
+# causing the install step to fail (confusion where the generated files
+# are stored)
+#
+# - The documentation build is not part of the 'build' target. The user
+# has explicitly to trigger the doc build. Hence the documentation is
+# not added to the 'install' target.
+#
+# Thus just use a plain old shell script to move the generated files to the
+# right location.
+
+conf = configuration_data()
+conf.set('SRCDIR', meson.current_build_dir())
+conf.set('MANDIR', mandir)
+conf.set('HTMLDIR', htmldir)
+configure_file(
+ input: 'install-docs.sh.in',
+ output: 'install-docs.sh',
+ configuration: conf)
+
+meson.add_install_script(
+ join_paths(meson.current_build_dir(), 'install-docs.sh'))
new file mode 120000
@@ -0,0 +1 @@
+../Documentation
\ No newline at end of file
new file mode 120000
@@ -0,0 +1 @@
+../check-manpages.sh
\ No newline at end of file
new file mode 100644
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: LGPL-2.1
+#
+# Copyright (c) 2023 Daniel Wagner, SUSE LLC
+
+project(
+ 'libtracecmd', ['c'],
+ meson_version: '>= 0.50.0',
+ license: 'GPL-2.0',
+ version: '1.3.0',
+ default_options: [
+ 'c_std=gnu99',
+ 'buildtype=debug',
+ 'default_library=both',
+ 'prefix=/usr/local',
+ 'warning_level=1'])
+
+cc = meson.get_compiler('c')
+
+prefixdir = get_option('prefix')
+mandir = join_paths(prefixdir, get_option('mandir'))
+htmldir = join_paths(prefixdir, get_option('htmldir'))
+
+libtracecmd_standalone_build = true
+
+library_version = meson.project_version()
+
+conf = configuration_data()
+
+libtraceevent_dep = dependency('libtraceevent', version: '>= 1.5.0', required: true)
+libtracefs_dep = dependency('libtracefs', version: '>= 1.6.0', required: true)
+
+zlib_dep = dependency('zlib', required: false)
+conf.set('HAVE_ZLIB', zlib_dep.found(), description: 'Is zlib avialable?')
+
+libzstd_dep = dependency('libzstd', version: '>= 1.4.0', required: false)
+conf.set('HAVE_ZSTD', libzstd_dep.found(), description: 'Is libzstd available?')
+
+cunit_dep = dependency('cunit', required : false)
+
+vsock_defined = get_option('vsock') and cc.has_header('linux/vm_sockets.h')
+conf.set('VSOCK', vsock_defined, description: 'Is vsock available?')
+
+perf_defined = cc.has_header('linux/perf_event.h')
+conf.set('PERF', perf_defined, description: 'Is perf available?')
+
+have_ptrace = get_option('ptrace') and cc.compiles(
+ '''
+ #include <stdio.h>
+ #include <sys/ptrace.h>
+
+ int main (void)
+ {
+ int ret;
+ ret = ptrace(PTRACE_ATTACH, 0, NULL, 0);
+ ptrace(PTRACE_TRACEME, 0, NULL, 0);
+ ptrace(PTRACE_GETSIGINFO, 0, NULL, NULL);
+ ptrace(PTRACE_GETEVENTMSG, 0, NULL, NULL);
+ ptrace(PTRACE_SETOPTIONS, NULL, NULL,
+ PTRACE_O_TRACEFORK |
+ PTRACE_O_TRACEVFORK |
+ PTRACE_O_TRACECLONE |
+ PTRACE_O_TRACEEXIT);
+ ptrace(PTRACE_CONT, NULL, NULL, 0);
+ ptrace(PTRACE_DETACH, 0, NULL, NULL);
+ ptrace(PTRACE_SETOPTIONS, 0, NULL,
+ PTRACE_O_TRACEFORK |
+ PTRACE_O_TRACEVFORK |
+ PTRACE_O_TRACECLONE |
+ PTRACE_O_TRACEEXIT);
+ return ret;
+ }
+ ''',
+ name: 'ptrace')
+if not have_ptrace
+ conf.set10('NO_PTRACE', true, description: 'Is ptrace missing?')
+ conf.set('WARN_NO_PTRACE', true, description: 'Issue no ptrace warning?')
+endif
+
+audit_dep = dependency('audit', required: false)
+if not audit_dep.found()
+ conf.set10('NO_AUDIT', true, description: 'Is audit missing?')
+ conf.set('WARN_NO_AUDIT', true, description: 'Issue no audit warning?')
+endif
+
+add_project_arguments(
+ [
+ '-D_GNU_SOURCE',
+ '-include', 'trace-cmd/include/private/config.h',
+ ],
+ language : 'c')
+
+libtracecmd_ext_incdir = include_directories(
+ [
+ '../include',
+ '../include/trace-cmd',
+ '../tracecmd/include'
+ ])
+
+subdir('trace-cmd/include')
+subdir('trace-cmd/include/private')
+subdir('trace-cmd')
+if libtracecmd_standalone_build
+ subdir('Documentation/libtracecmd')
+
+ custom_target(
+ 'docs',
+ output: 'docs',
+ depends: [html, man],
+ command: ['echo'])
+endif
+
+install_headers(
+ '../include/trace-cmd/trace-cmd.h',
+ subdir: 'trace-cmd')
new file mode 100644
@@ -0,0 +1,19 @@
+# -*- mode: meson -*-
+# SPDX-License-Identifier: LGPL-2.1
+
+option('vsock', type : 'boolean', value : true,
+ description : 'build with vsock support')
+option('ptrace', type : 'boolean', value : true,
+ description : 'build with ptrace support')
+option('htmldir', type : 'string', value : 'share/doc/libtracecmd-doc',
+ description : 'directory for HTML documentation')
+option('asciidoctor', type : 'boolean', value: false,
+ description : 'use asciidoctor instead of asciidoc')
+option('docbook-xls-172', type : 'boolean', value : false,
+ description : 'enable docbook XLS 172 workaround')
+option('asciidoc-no-roff', type : 'boolean', value : false,
+ description : 'enable no roff workaround')
+option('man-bold-literal', type : 'boolean', value : false,
+ description : 'enable bold literals')
+option('docbook-suppress-sp', type : 'boolean', value : false,
+ description : 'docbook suppress sp')
new file mode 100644
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: LGPL-2.1
+#
+# Copyright (c) 2023 Daniel Wagner, SUSE LLC
+
+libtracecmd_incdir = include_directories(['.'])
new file mode 100644
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: LGPL-2.1
+#
+# Copyright (c) 2023 Daniel Wagner, SUSE LLC
+
+config_h = configure_file(
+ output: 'config.h',
+ configuration: conf
+)
+
+libtracecmd_private_incdir = include_directories(['.'])
+
+config_dep = declare_dependency(
+ include_directories : libtracecmd_private_incdir,
+ sources: config_h)
new file mode 100644
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: LGPL-2.1
+#
+# Copyright (c) 2023 Daniel Wagner, SUSE LLC
+
+sources = [
+ 'trace-hash.c',
+ 'trace-hooks.c',
+ 'trace-input.c',
+ 'trace-output.c',
+ 'trace-recorder.c',
+ 'trace-util.c',
+ 'trace-filter-hash.c',
+ 'trace-filter.c',
+ 'trace-msg.c',
+ 'trace-plugin.c',
+ 'trace-maps.c',
+ 'trace-timesync.c',
+ 'trace-timesync-ptp.c',
+ 'trace-compress.c',
+ 'trace-blk-hack.c',
+ 'trace-ftrace.c',
+]
+
+if perf_defined
+ sources += 'trace-perf.c'
+endif
+
+if vsock_defined
+ sources += 'trace-timesync-kvm.c'
+endif
+
+if zlib_dep.found()
+ sources += 'trace-compress-zlib.c'
+endif
+
+if libzstd_dep.found()
+ sources += 'trace-compress-zstd.c'
+endif
+
+if libtracecmd_standalone_build
+ libtracecmd = library(
+ 'tracecmd',
+ sources,
+ version: library_version,
+ dependencies: [
+ libtraceevent_dep,
+ libtracefs_dep,
+ zlib_dep,
+ libzstd_dep,
+ audit_dep],
+ include_directories: [
+ libtracecmd_incdir,
+ libtracecmd_private_incdir,
+ libtracecmd_ext_incdir],
+ install: true)
+
+ pkg = import('pkgconfig')
+ pkg.generate(
+ libtracecmd,
+ subdirs: 'trace-cmd',
+ libraries: [
+ libtracefs_dep,
+ libtraceevent_dep],
+ filebase: meson.project_name(),
+ name: meson.project_name(),
+ version: meson.project_version(),
+ description: 'Library for creating and reading trace-cmd data files',
+ url: 'https://git.kernel.org/pub/scm/utils/trace-cmd/trace-cmd.git/')
+
+ libtracecmd_dep = declare_dependency(
+ include_directories: ['.'],
+ link_with: libtracecmd)
+else
+ static_libtracecmd = static_library(
+ 'tracecmd',
+ sources,
+ dependencies: [
+ libtraceevent_dep,
+ libtracefs_dep,
+ zlib_dep,
+ libzstd_dep,
+ audit_dep],
+ include_directories: [
+ libtracecmd_incdir,
+ libtracecmd_private_incdir,
+ libtracecmd_ext_incdir],
+ install: false)
+endif
Add support for building the project with meson. As libtracecmd lives in the same source tree as trace-cmd, we have to place the 'top' meson.builld file under lib but we can't reference it from the root meson.build which controlling the main trace-cmd build. This implies we can't access resources/path which are not below the library's main meson.build directly. Thus, to be able to build the documentation we have to use the symlink as workaround. Signed-off-by: Daniel Wagner <dwagner@suse.de> --- Documentation/libtracecmd/install-docs.sh.in | 20 +++ Documentation/libtracecmd/meson.build | 168 +++++++++++++++++++ lib/Documentation | 1 + lib/check-manpages.sh | 1 + lib/meson.build | 114 +++++++++++++ lib/meson_options.txt | 19 +++ lib/trace-cmd/include/meson.build | 5 + lib/trace-cmd/include/private/meson.build | 14 ++ lib/trace-cmd/meson.build | 88 ++++++++++ 9 files changed, 430 insertions(+) create mode 100755 Documentation/libtracecmd/install-docs.sh.in create mode 100644 Documentation/libtracecmd/meson.build create mode 120000 lib/Documentation create mode 120000 lib/check-manpages.sh create mode 100644 lib/meson.build create mode 100644 lib/meson_options.txt create mode 100644 lib/trace-cmd/include/meson.build create mode 100644 lib/trace-cmd/include/private/meson.build create mode 100644 lib/trace-cmd/meson.build