mbox series

[v9,00/11] tracing/user_events: Remote write ABI

Message ID 20230324223028.172-1-beaub@linux.microsoft.com (mailing list archive)
Headers show
Series tracing/user_events: Remote write ABI | expand

Message

Beau Belgrave March 24, 2023, 10:30 p.m. UTC
As part of the discussions for user_events aligned with user space
tracers, it was determined that user programs should register a aligned
value to set or clear a bit when an event becomes enabled. Currently a
shared page is being used that requires mmap(). Remove the shared page
implementation and move to a user registered address implementation.

In this new model during the event registration from user programs 3 new
values are specified. The first is the address to update when the event
is either enabled or disabled. The second is the bit to set/clear to
reflect the event being enabled. The third is the size of the value at
the specified address.

This allows for a local 32/64-bit value in user programs to support
both kernel and user tracers. As an example, setting bit 31 for kernel
tracers when the event becomes enabled allows for user tracers to use
the other bits for ref counts or other flags. The kernel side updates
the bit atomically, user programs need to also update these values
atomically.

User provided addresses must be aligned on a natural boundary, this
allows for single page checking and prevents odd behaviors such as a
enable value straddling 2 pages instead of a single page.

When page faults are encountered they are done asyncly via a workqueue.
If the page faults back in, the write update is attempted again. If the
page cannot fault-in, then we log and wait until the next time the event
is enabled/disabled. This is to prevent possible infinite loops resulting
from bad user processes unmapping or changing protection values after
registering the address.

Change history

V9:
Updated documentation to include __packed attributed in example payload.

Removed boot argument for max events, since sysctl can now be set via
kernel boot parameters.

V8:
Rebase to 6.2-rc8.

V7:
Rebase to 6.2-rc4.

Added flags to register ioctl, validates it's 0 for now. Future patches
will enable other types of formats/options as needed.

V6:
Rebase to 6.2-rc2.

Fixed small typos, code style.

Changed from synchronize_rcu() to queue_rcu_work() to allow an rcu
delay asyncly when mm is being removed and in an appropriate context
for mmdrop().

V5:
GFP_NOWAIT is still needed in user_event_enabler_dup(), due to rcu lock.

V4:
Rebase to 6.1-rc7.

Moved user_events_fork() out of task signal lock and dropped use of
GFP_NOWAIT. All allocations are now GFP_KERNEL or GFP_KERNEL_ACCOUNT.

Added boot parameter user_events_max= to limit global events.

Added sysctl value kernel.user_events_max to limit global events.

Added cgroup tracking of memory allocated for events.

V3:
Rebase to 6.1-rc6.

Removed RFC tag on series.

Updated documentation to reflect ABI changes.

Added self-test for ABI specific clone/fork cases.

Moved user_event_mm removal into do_exit() to ensure RSS task accounting
is done properly in async fault paths. Also lets us remove the delayed
mmdrop(), saving memory in each user_event_mm struct.

Fixed timing window where task exits, but write could be in-progress.
During exit we now take mmap_write_lock to ensure we drain writes.

V2:
Rebase to 6.1-rc5.

Added various comments based on feedback.

Added enable_size to register struct, allows 32/64 bit addresses
as long as the enable_bit fits and the address is naturally aligned.

Changed user_event_enabler_write to accept a new flag indicating if a
fault fixup should be done or not. This allows user_event_enabler_create
to return back failures to the user ioctl reg call and retry to fault
in data.

Added tracking fork/exec/exit of tasks to have the user_event_mm lifetime
tied more to the task than the file. This came with extra requirements
around when you can lock, such as softirq cases, as well as a RCU
pattern to ensure fork/exec/exit take minimal lock times.

Changed enablers to use a single word-aligned value for saving the bit
to set and any flags, such as faulting asyncly or being freed. This was
required to ensure atomic bit set/test for fork cases where taking the
event_mutex is not a good scalability decision.

Added unregister IOCTL, since file lifetime no longer limits the enable
time for any events (the mm does).

Updated sample code to reflect the new remote write based ABI.

Updated self-test code to reflect the new remote write based ABI.

Beau Belgrave (11):
  tracing/user_events: Split header into uapi and kernel
  tracing/user_events: Track fork/exec/exit for mm lifetime
  tracing/user_events: Use remote writes for event enablement
  tracing/user_events: Fixup enable faults asyncly
  tracing/user_events: Add ioctl for disabling addresses
  tracing/user_events: Update self-tests to write ABI
  tracing/user_events: Add ABI self-test
  tracing/user_events: Use write ABI in example
  tracing/user_events: Update documentation for ABI
  tracing/user_events: Charge event allocs to cgroups
  tracing/user_events: Limit global user_event count

 Documentation/trace/user_events.rst           | 179 ++--
 fs/exec.c                                     |   2 +
 include/linux/sched.h                         |   5 +
 include/linux/user_events.h                   | 101 ++-
 include/uapi/linux/user_events.h              |  81 ++
 kernel/exit.c                                 |   2 +
 kernel/fork.c                                 |   2 +
 kernel/trace/Kconfig                          |   5 +-
 kernel/trace/trace_events_user.c              | 851 +++++++++++++++---
 samples/user_events/example.c                 |  47 +-
 tools/testing/selftests/user_events/Makefile  |   2 +-
 .../testing/selftests/user_events/abi_test.c  | 226 +++++
 .../testing/selftests/user_events/dyn_test.c  |   2 +-
 .../selftests/user_events/ftrace_test.c       | 162 ++--
 .../testing/selftests/user_events/perf_test.c |  39 +-
 15 files changed, 1306 insertions(+), 400 deletions(-)
 create mode 100644 include/uapi/linux/user_events.h
 create mode 100644 tools/testing/selftests/user_events/abi_test.c


base-commit: ceaa837f96adb69c0df0397937cd74991d5d821a

Comments

Masami Hiramatsu (Google) March 26, 2023, 3:23 p.m. UTC | #1
On Fri, 24 Mar 2023 15:30:17 -0700
Beau Belgrave <beaub@linux.microsoft.com> wrote:

> As part of the discussions for user_events aligned with user space
> tracers, it was determined that user programs should register a aligned
> value to set or clear a bit when an event becomes enabled. Currently a
> shared page is being used that requires mmap(). Remove the shared page
> implementation and move to a user registered address implementation.
> 
> In this new model during the event registration from user programs 3 new
> values are specified. The first is the address to update when the event
> is either enabled or disabled. The second is the bit to set/clear to
> reflect the event being enabled. The third is the size of the value at
> the specified address.
> 
> This allows for a local 32/64-bit value in user programs to support
> both kernel and user tracers. As an example, setting bit 31 for kernel
> tracers when the event becomes enabled allows for user tracers to use
> the other bits for ref counts or other flags. The kernel side updates
> the bit atomically, user programs need to also update these values
> atomically.
> 
> User provided addresses must be aligned on a natural boundary, this
> allows for single page checking and prevents odd behaviors such as a
> enable value straddling 2 pages instead of a single page.
> 
> When page faults are encountered they are done asyncly via a workqueue.
> If the page faults back in, the write update is attempted again. If the
> page cannot fault-in, then we log and wait until the next time the event
> is enabled/disabled. This is to prevent possible infinite loops resulting
> from bad user processes unmapping or changing protection values after
> registering the address.

This series looks good to me.

Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

for the series.

Thank you!

> 
> Change history
> 
> V9:
> Updated documentation to include __packed attributed in example payload.
> 
> Removed boot argument for max events, since sysctl can now be set via
> kernel boot parameters.
> 
> V8:
> Rebase to 6.2-rc8.
> 
> V7:
> Rebase to 6.2-rc4.
> 
> Added flags to register ioctl, validates it's 0 for now. Future patches
> will enable other types of formats/options as needed.
> 
> V6:
> Rebase to 6.2-rc2.
> 
> Fixed small typos, code style.
> 
> Changed from synchronize_rcu() to queue_rcu_work() to allow an rcu
> delay asyncly when mm is being removed and in an appropriate context
> for mmdrop().
> 
> V5:
> GFP_NOWAIT is still needed in user_event_enabler_dup(), due to rcu lock.
> 
> V4:
> Rebase to 6.1-rc7.
> 
> Moved user_events_fork() out of task signal lock and dropped use of
> GFP_NOWAIT. All allocations are now GFP_KERNEL or GFP_KERNEL_ACCOUNT.
> 
> Added boot parameter user_events_max= to limit global events.
> 
> Added sysctl value kernel.user_events_max to limit global events.
> 
> Added cgroup tracking of memory allocated for events.
> 
> V3:
> Rebase to 6.1-rc6.
> 
> Removed RFC tag on series.
> 
> Updated documentation to reflect ABI changes.
> 
> Added self-test for ABI specific clone/fork cases.
> 
> Moved user_event_mm removal into do_exit() to ensure RSS task accounting
> is done properly in async fault paths. Also lets us remove the delayed
> mmdrop(), saving memory in each user_event_mm struct.
> 
> Fixed timing window where task exits, but write could be in-progress.
> During exit we now take mmap_write_lock to ensure we drain writes.
> 
> V2:
> Rebase to 6.1-rc5.
> 
> Added various comments based on feedback.
> 
> Added enable_size to register struct, allows 32/64 bit addresses
> as long as the enable_bit fits and the address is naturally aligned.
> 
> Changed user_event_enabler_write to accept a new flag indicating if a
> fault fixup should be done or not. This allows user_event_enabler_create
> to return back failures to the user ioctl reg call and retry to fault
> in data.
> 
> Added tracking fork/exec/exit of tasks to have the user_event_mm lifetime
> tied more to the task than the file. This came with extra requirements
> around when you can lock, such as softirq cases, as well as a RCU
> pattern to ensure fork/exec/exit take minimal lock times.
> 
> Changed enablers to use a single word-aligned value for saving the bit
> to set and any flags, such as faulting asyncly or being freed. This was
> required to ensure atomic bit set/test for fork cases where taking the
> event_mutex is not a good scalability decision.
> 
> Added unregister IOCTL, since file lifetime no longer limits the enable
> time for any events (the mm does).
> 
> Updated sample code to reflect the new remote write based ABI.
> 
> Updated self-test code to reflect the new remote write based ABI.
> 
> Beau Belgrave (11):
>   tracing/user_events: Split header into uapi and kernel
>   tracing/user_events: Track fork/exec/exit for mm lifetime
>   tracing/user_events: Use remote writes for event enablement
>   tracing/user_events: Fixup enable faults asyncly
>   tracing/user_events: Add ioctl for disabling addresses
>   tracing/user_events: Update self-tests to write ABI
>   tracing/user_events: Add ABI self-test
>   tracing/user_events: Use write ABI in example
>   tracing/user_events: Update documentation for ABI
>   tracing/user_events: Charge event allocs to cgroups
>   tracing/user_events: Limit global user_event count
> 
>  Documentation/trace/user_events.rst           | 179 ++--
>  fs/exec.c                                     |   2 +
>  include/linux/sched.h                         |   5 +
>  include/linux/user_events.h                   | 101 ++-
>  include/uapi/linux/user_events.h              |  81 ++
>  kernel/exit.c                                 |   2 +
>  kernel/fork.c                                 |   2 +
>  kernel/trace/Kconfig                          |   5 +-
>  kernel/trace/trace_events_user.c              | 851 +++++++++++++++---
>  samples/user_events/example.c                 |  47 +-
>  tools/testing/selftests/user_events/Makefile  |   2 +-
>  .../testing/selftests/user_events/abi_test.c  | 226 +++++
>  .../testing/selftests/user_events/dyn_test.c  |   2 +-
>  .../selftests/user_events/ftrace_test.c       | 162 ++--
>  .../testing/selftests/user_events/perf_test.c |  39 +-
>  15 files changed, 1306 insertions(+), 400 deletions(-)
>  create mode 100644 include/uapi/linux/user_events.h
>  create mode 100644 tools/testing/selftests/user_events/abi_test.c
> 
> 
> base-commit: ceaa837f96adb69c0df0397937cd74991d5d821a
> -- 
> 2.25.1
>