mbox series

[V1,0/6] USB: serial: f81232: Add F81534A support

Message ID 1559789656-15847-1-git-send-email-hpeter+linux_kernel@gmail.com (mailing list archive)
Headers show
Series USB: serial: f81232: Add F81534A support | expand

Message

Ji-Ze Hong (Peter Hong) June 6, 2019, 2:54 a.m. UTC 
This series patches will add Fintek F81532A/534A/535/536 support and
refactoring some source code.

The Fintek F81532A/534A/535/536 is USB-to-2/4/8/12 serial ports device.
It cotains a HUB, a GPIO device and 2/4/8/12 serial ports. The F81534A
series will default enable only HUB & GPIO device when plugged and disable
UARTs as default. We need control GPIO device to enable serial port with
special sequence.

The most serial port features of F81534A series is same with F81232.
That's the difference with following:
	1. More RX FIFO and cache. (128byte FIFO + max to 128bytes*4 cache)
	2. up to 3MBits baudrate.
	3. 3x GPIOs per port to control transceiver.
	4. UART devices need enabled by GPIO device register.

Ji-Ze Hong (Peter Hong) (6):
  USB: serial: f81232: Add F81534A support
  USB: serial: f81232: Force F81534A with RS232 mode
  USB: serial: f81232: Add generator for F81534A
  USB: serial: f81232: Add tx_empty function
  USB: serial: f81232: Use devm_kzalloc
  USB: serial: f81232: Add gpiolib to GPIO device

 drivers/usb/serial/f81232.c | 760 ++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 741 insertions(+), 19 deletions(-)