From patchwork Fri Feb 7 20:16:36 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bryan O'Donoghue X-Patchwork-Id: 11371195 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 55246138D for ; Fri, 7 Feb 2020 20:18:29 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 2916F24125 for ; Fri, 7 Feb 2020 20:18:29 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="nJRE5Oqg" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727443AbgBGUQw (ORCPT ); Fri, 7 Feb 2020 15:16:52 -0500 Received: from mail-wm1-f66.google.com ([209.85.128.66]:56055 "EHLO mail-wm1-f66.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727289AbgBGUQw (ORCPT ); Fri, 7 Feb 2020 15:16:52 -0500 Received: by mail-wm1-f66.google.com with SMTP id q9so3799941wmj.5 for ; Fri, 07 Feb 2020 12:16:50 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=4wW2T2Hf0VfuSYnJQMUU+IIJaZFO8kXPo9LciCrLguQ=; b=nJRE5Oqg80/6zlUNLtjSSi5V0IhlQuxcxDib7pTKZi3Czuw3lN22oJ97lXCcigyQbX ksmmt1T6Ynvcj39HiMiD4CsmQQH7KeluVEAjxEwvCgh9V75Xz4X2G+2kjxtMmQyF10kv TEzK3FKN7vZjDSropS8pxWCxUsCpAY+p9AU0N8nEf+p95VpqjNaGU238Jy0fEHICosr1 B9+R0pCEFIG0G+XjH1qOhvW7Z0o+GlYKKwRbmpdIksvbT0egR+hZ0ZdK8EXN7n7s+/lm rl1ND+S585EteurjK1j5MiUxGZA0tP3B09qnlMUSmwKr+KGJ6dKffTTmJkILnlxNMLnT 8mqA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=4wW2T2Hf0VfuSYnJQMUU+IIJaZFO8kXPo9LciCrLguQ=; b=NfFAUH+q/TjNcM9EifVZyJdw2YR0Itr3tVn+XTvA8pZIham4ssMrBu+/ypBlrE5ISR wv9g76YRfMYkGPHm8KOjGb+vqtSEZgs9TbPcxEVBV8dbxNZqgoXRyoUnXeq6+7O4r8X8 ohcQGfSRWxvhrxXjhk8TkowIgUxF7pwmWv+pOX95X5wb1XfDDgZIxr73TIKV60LalEjN BCQgIw+KRTxm7a2OaTB3SvHiuVb9KBbfOxKRmWYCjKzHkkKD438bMjL1vW37BQ9/PWjL AMPPx5O4bC7OVPAapROIv0Lk+LRE+pXiAPZZMrMkPJSxAZ7ULUs+I/vKD8qZFYrP6BPv V5KQ== X-Gm-Message-State: APjAAAVMXre9YMlvUpcW/4W1rIiYdXJ2aqnc9v8HNEqgFNEV3+vh/Eow MSYOQWI9l1+26G48sWUJyQpRxg== X-Google-Smtp-Source: APXvYqxLoLnAheBAIMTB5ALNDAeFHFdgKeOOSwJyrZY832oHFlYsuJKyZc3qvvxRv88E9Q1d3EFJ7w== X-Received: by 2002:a1c:1fc5:: with SMTP id f188mr24171wmf.55.1581106609635; Fri, 07 Feb 2020 12:16:49 -0800 (PST) Received: from localhost.localdomain ([176.61.57.127]) by smtp.gmail.com with ESMTPSA id h2sm5018542wrt.45.2020.02.07.12.16.48 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 07 Feb 2020 12:16:48 -0800 (PST) From: Bryan O'Donoghue To: linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org, gregkh@linuxfoundation.org, jackp@codeaurora.org, balbi@kernel.org, bjorn.andersson@linaro.org, robh@kernel.org Cc: linux-kernel@vger.kernel.org, Bryan O'Donoghue Subject: [PATCH v5 00/18] Enable Qualcomm QCS 404 HS/SS USB Date: Fri, 7 Feb 2020 20:16:36 +0000 Message-Id: <20200207201654.641525-1-bryan.odonoghue@linaro.org> X-Mailer: git-send-email 2.25.0 MIME-Version: 1.0 Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org V1: This series enables the Primary and Secondary USB controllers on the QCS404, associated PHYs, role-switching and DTS descriptions. The series takes in a number of patches worked on by a number of people over the past few years from downstream, through to previous upstream submissions for both of these interfaces. Additional work has been done to enable USB role-switching. 1. USB SS - extcon has been dropped in favour of gpio-usb-conn as discussed and agreed previously by Jorge, Bjorn, Stephen Boyd and Jack Pham [1]. - Regulator API has been updated following suggestions from Bjorn. - Sanitzation of the DT compatible name - dropped "snps" entirely from the name - it made almost no sense to me and doesn't appear consistent with similar naming conventions for Snopsys based IP. 2. USB HS - Regulator API changes here. - Dropped "snps" from the namespace for similar reasons as above. - Dropped "28nm" from the namespace, looked superfluous. - Changed "High-Speed" to "Hi-Speed". - [2] 3. DWC3 Role switching - At the time usb-gpio-conn was discussed it was mentioned that role-switching was absent from the DWC3 driver. - John Stultz has some patches in-flight for that, that I've included in this series for completeness. - Adds my SoB to relevant patches. - Drops gerrit ChangeId. 4. DWC3 usb-gpio-conn Needs to be a child node of the DWC3 driver so some code and DT binding is required for that. 5. QCOM-DWC3 Since we are role-switching with an external PMIC supplying VBUS we want to skip past toggling VBUS from QCOM-DWC3 controlled registers, so a patch is added to the qcom-dwc3 driver to do that. References: 1: USB SS PHY for Qualcomm's QCS404 https://lwn.net/ml/devicetree/20190207111734.24171-1-jorge.ramirez-ortiz@linaro.org/ 2: Add Synopsys High-Speed USB PHY driver for Qualcomm SoCs https://lore.kernel.org/linux-arm-msm/20181127100722.9993-3-shawn.guo@linaro.org/ https://www.spinics.net/lists/linux-usb/msg190003.html V2: - Fixes yaml error - Rob's YAML robot - Exclusive control of reset in PHY drivers - Philipp Zabel V3: - Fixes typo generating YAML warning - Rob's YAML robot V4: https://lore.kernel.org/linux-arm-msm/20200122185610.131930-1-bryan.odonoghue@linaro.org/ - Churn names of PHYs - Rob Herring Rob questioned the name of the SuperSpeed PHY in V3. Looking at available data usb-hs-28nm - There are two possible PHYs on 28nm litho node so it makes sense to name the PHY relating to its relevant litho node. usb-ss - This is not litho node dependent and is used on multiple SoCs and litho nodes. - Drop default mode for role switching - Felipe Balbi Felipe asked if the default mode for role switching was required and the answer is no. It makes no difference becuase the USB ID pin ultimately dictates the mode of operation. - Change "gpio_usb_connector" to "connector" - Rob This was a minor change in terms of DTS but, means I need to look for the DTS compatible string as opposed to a label given in the DTS. No matter what the name of the label, this is he right thing to do. - Used IS_ENABLED() - Felipe The logic is the same but IS_ENABLED() is used now. - Retained example of USB connector in dwc.txt - Rob, Felipe Rob pointed out adding the connector was redundant as the documentation already implies it. Felipe seemed in favour of I think adding the example. I've dropped the documentation of the connector and kept the example. https://lore.kernel.org/linux-arm-msm/20200122185610.131930-7-bryan.odonoghue@linaro.org/ - Added example of usb-role-switch in dwc3.txt - BOD - Incorporated various inputs from Rob on DTS/YAML - Added required: - Added additionalProperties: - Renamed "phy" clock to "ahb" - maxItems dropped as indicated V5: - https://lkml.org/lkml/2020/2/6/913 - Adds a notifier to DWC3 - BOD This is done in order to allow propagation of role-switch events from the DWC3 core to an associated binding layer. - Re-use the existent EXTCON VBUS power lane toggle logic - Jack Pham Jack flagged this for inclusion and as a result we need to make a small change to the qcom binding layer. - Squash DTS changes - BOD I've squashed down some of the DTS changes to stop the patch count in this series going up any further. Bjorn Andersson (1): arm64: dts: qcom: qcs404: Add USB devices and PHYs Bryan O'Donoghue (11): dt-bindings: usb: dwc3: Add a gpio-usb-connector example dt-bindings: usb: dwc3: Add a usb-role-switch to the example usb: dwc3: qcom: Add support for usb-conn-gpio connectors usb: dwc3: Add support for usb-conn-gpio connectors usb: dwc3: Add support for a role-switch notifier usb: dwc3: qcom: Enable gpio-usb-conn based role-switching arm64: dts: qcom: qcs404-evb: Define VBUS pins arm64: dts: qcom: qcs404-evb: Define USB ID pin arm64: dts: qcom: qcs404-evb: Describe external VBUS regulator arm64: dts: qcom: qcs404-evb: Raise vreg_l12_3p3 minimum voltage arm64: dts: qcom: qcs404-evb: Enable USB controllers Jorge Ramirez-Ortiz (3): dt-bindings: phy: remove qcom-dwc3-usb-phy dt-bindings: Add Qualcomm USB SuperSpeed PHY bindings phy: qualcomm: usb: Add SuperSpeed PHY driver Shawn Guo (1): phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver Sriharsha Allenki (1): dt-bindings: phy: Add Qualcomm Synopsys Hi-Speed USB PHY binding Yu Chen (1): usb: dwc3: Registering a role switch in the DRD code. .../bindings/phy/qcom,usb-hs-28nm.yaml | 90 ++++ .../devicetree/bindings/phy/qcom,usb-ss.yaml | 83 ++++ .../bindings/phy/qcom-dwc3-usb-phy.txt | 37 -- .../devicetree/bindings/usb/dwc3.txt | 9 + arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 90 +++- arch/arm64/boot/dts/qcom/qcs404.dtsi | 100 +++++ drivers/phy/qualcomm/Kconfig | 20 + drivers/phy/qualcomm/Makefile | 2 + drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c | 415 ++++++++++++++++++ drivers/phy/qualcomm/phy-qcom-usb-ss.c | 246 +++++++++++ drivers/usb/dwc3/core.h | 22 + drivers/usb/dwc3/drd.c | 117 ++++- drivers/usb/dwc3/dwc3-qcom.c | 31 +- 13 files changed, 1221 insertions(+), 41 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-ss.yaml delete mode 100644 Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt create mode 100644 drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c create mode 100644 drivers/phy/qualcomm/phy-qcom-usb-ss.c