mbox series

[0/7] SUNIV USB support (and updating mailmap)

Message ID 20220608070452.338006-1-uwu@icenowy.me (mailing list archive)
Headers show
Series SUNIV USB support (and updating mailmap) | expand

Message

Icenowy Zheng June 8, 2022, 7:04 a.m. UTC 
This patchset introduces support for F1C100s' USB.

As I switched to a new mail address, and this patchset contains patches
authored before this change, a mailmap update is added.

The DT binding and driver support for SUNIV USB PHY/MUSB are added, in
addition to DT changes to the DTSI and Lichee Nano DT.

Icenowy Zheng (7):
  mailmap: update Icenowy Zheng's mail address
  dt-bindings: phy: add binding document for Allwinner F1C100s USB PHY
  dt-bindings: usb: sunxi-musb: add F1C100s MUSB compatible string
  phy: sun4i-usb: add support for the USB PHY on F1C100s SoC
  musb: sunxi: add support for the F1C100s MUSB controller
  ARM: suniv: add USB-related device nodes
  ARM: suniv: f1c100s: enable USB on Lichee Pi Nano

 .mailmap                                      |  3 +
 .../phy/allwinner,suniv-f1c100s-usb-phy.yaml  | 83 +++++++++++++++++++
 .../usb/allwinner,sun4i-a10-musb.yaml         |  1 +
 .../boot/dts/suniv-f1c100s-licheepi-nano.dts  | 16 ++++
 arch/arm/boot/dts/suniv-f1c100s.dtsi          | 26 ++++++
 drivers/phy/allwinner/phy-sun4i-usb.c         | 11 +++
 drivers/usb/musb/sunxi.c                      |  8 +-
 7 files changed, 146 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/allwinner,suniv-f1c100s-usb-phy.yaml