[v7,00/13] Add Qualcomm PMIC TPCM support

Message

Bryan O'Donoghue May 8, 2023, 2:22 p.m. UTC

I'm dropping the previous V1-V6 log because the text is getting too long
here's a link to the previous cover letter instead
Link: https://lore.kernel.org/linux-arm-msm/[e-mail]/

Bootable tree
Link: https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/linux-next-23-05-07-pm8150b-tcpm-qcom-wrapper-typec-mux-bjorn

Please note patch#5 and patch#6 should be merged in tandem not separately.

V7:
- Adds R/B to "dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: Add input and output ports" - Krzysztof
- Fixes indicated, adds R/B to "dt-bindings: usb: Add Qualcomm PMIC Type-C" - Krzysztof
- Fixes indicated, adds R/B to "usb: typec: qcom: Add Qualcomm PMIC Type-C driver" - Guenter
- Fixes indicated, adds R/B to "usb: typec: qcom: Add Qualcomm PMIC Type-C driver" - Caleb
- Adds R/B to "arm64: dts: qcom: sm8250: Define ports for qmpphy orientation-switching" - Konrad
- Adds R/B to "arm64: dts: qcom: qrb5165-rb5: Switch on Type-C VBUS boost" - Konrad
- Fixes indicated, adds R/B to "arm64: dts: qcom: qrb5165-rb5: Switch on basic TCPM" - Jianhua, Konrad
- Connector ports/endpoints left inside of connector
  Documentation/devicetree/bindings/connector/usb-connector.yaml - Jianhua
- dwc3_role_switch_in -> usb_1_dwc3_role_switch_in
  qmpphy_typec_mux_in -> usb_1_qmpphy_typec_mux_in
  Both ports/endpoints defined inside of pm8150b dtsi - Konrad

  I modified the name of both so that the port/endpoint would be directly
  adjacent to the containing node in the dtsi file for code locality/readbility - bod

- Fixes newline indicated "arm64: dts: qcom: qrb5165-rb5: Switch on TCPM usb-role-switching for usb_1" - Jianhua, Konrad
- Fixes newline indicated "arm64: dts: qcom: qrb5165-rb5: Switch on TCPM orientation-switch for usb_1_qmpphy" - Jianhua, Konrad

- connector
  I have left the connector defintion and its ports/endpoints in the platform dts

  The reason for this
  a) Prior art e.g. arch/arm64/boot/dts/qcom/sc8280xp*
  b) The connector is really a non-SoC/PMIC component its something that is defined
     for your platform.

  I'm open to further debate on this topic:
  Link: https://imgflip.com/i/7kw6ck

- port@1 -> port@1 "arm64: dts: qcom: qrb5165-rb5: Switch on TCPM orientation-switch for usb_1_qmpphy" - Jianhua

- OF: graph: no port node found in /soc@0/spmi@c440000/pmic@2/typec@1500

  I left this as-is since the DT model we want is to connect the connector directly to
  the PHY for orientation or controller for data-role switching

  I similarly didn't put this hack in place to remove the warning but "it would work"
  &pm8150b_typec {
        status = "okay";
 
  +       ports {
  +               port@0 {
  +                       reg = <0>;
  +               };
  +        };
  +

- Fairphone4 / sm7225
  pm7250b is a derivative of pm8150b I have the hardware but, haven't booted to test/debug on this hardware yet

- RB3 / sdm845
  Caleb has a WIP patchset based on this series which is our next likely upstream candidate

Here's how I'm testing using an RB5/SM8250

A) Confirm device mode works in both orientations

- Boot to a Linux shell
- Run usb-ecm-up.sh [1]
- This provides usb0 on the device side @ 192.168.8.2
- Attach Type-C cable to host PC
- On host PC "sudo ifconfig usb0 192.168.8.1"
- Ping 192.168.8.2 confirming ping works
- Switch cable orientation
- On the PC side re-assign the ip address "sudo ifconfig usb0 192.168.8.1"
- Ping again confirming connectivity

B) Test automatic host-mode transition, orientation and SuperSpeed
- Remove cable from PC
- Attach a Type-C USB key
- Validate the orientation detection
  cat /sys/class/typec/port0/orientation 
  normal 
- Confirm the RB5 sees the USB key as a SuperSpeed device
- Remove USB key and physically invert it along the horizontal axis
- Re-insert the key
- Confirm the RB5 sees the USB key as a SuperSpeed device
- Validate the orientation detection
  cat /sys/class/typec/port0/orientation 
  reverse

C) Test Type-C accessory automatic host-mode transition, orientation and SuperSpeed
- Remove USB key from RB5
- Attach a Type-C USB accessory
- Validate the orientation detection
  cat /sys/class/typec/port0/orientation 
  normal
- Attach a SuperSpeed capable USB key to the Type-C accessory
- Confirm the RB5 sees the USB key as a SuperSpeed device
- Remove the USB key from the Type-C accessory
- Remove the Type-C accessory from the RB5
- Physically invert the Type-C accessory along the horizontal axis
- Re-insert the Type-C accessory
- Validate the orientation detection
  cat /sys/class/typec/port0/orientation 
  reverse
- Re-insert the key
- Confirm the RB5 sees the USB key as a SuperSpeed device

D) Goto Test-A
- Confirming that automatic switch to device mode happens
- Repeat the above loop in ~ any order

[1] usb-ecm-up.sh 
#!/usr/bin/env bash

# load libcomposite module
modprobe libcomposite

# ensure function is loaded
modprobe usb_f_ecm
modprobe usb_f_ncm

mount -t configfs none /sys/kernel/config/

# create a gadget
mkdir /sys/kernel/config/usb_gadget/g0

# cd to its configfs node
cd /sys/kernel/config/usb_gadget/g0

# configure it (vid/pid can be anything if USB Class is used for driver compat)
echo 0x0525 > idVendor
echo 0xa4a4 > idProduct

# configure its serial/mfg/product
mkdir strings/0x409

echo 0xCAFEBABE > strings/0x409/serialnumber
echo Linaro > strings/0x409/manufacturer
echo qrb5165-rb5 > strings/0x409/product

# create configs
mkdir configs/c.1
mkdir configs/c.1/strings/0x409

# create the function (name must match a usb_f_<name> module such as 'acm')
mkdir functions/ncm.0

echo "CDC ECM" > configs/c.1/strings/0x409/configuration

# associate function with config
ln -s functions/ncm.0 configs/c.1

# Set USB version 3.1
echo 0x0310 > bcdUSB

echo "super-speed-plus" > max_speed

# enable gadget by binding it to a UDC from /sys/class/udc
echo a600000.usb > UDC
# to unbind it: echo "" > UDC; sleep 1; rm -rf /sys/kernel/config/usb_gadget/g0

sleep 1

ifconfig usb0 192.168.8.2

Bryan O'Donoghue (13):
  dt-bindings: regulator: qcom,usb-vbus-regulator: Mark reg as required
  dt-bindings: regulator: qcom,usb-vbus-regulator: Mark
    regulator-*-microamp required
  dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: Add orientation-switch
    as optional
  dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: Add input and output
    ports
  dt-bindings: usb: Add Qualcomm PMIC Type-C
  dt-bindings: mfd: qcom,spmi-pmic: Add typec to SPMI device types
  usb: typec: qcom: Add Qualcomm PMIC Type-C driver
  arm64: dts: qcom: sm8250: Define ports for qmpphy
    orientation-switching
  arm64: dts: qcom: pm8150b: Add a TCPM description
  arm64: dts: qcom: qrb5165-rb5: Switch on Type-C VBUS boost
  arm64: dts: qcom: qrb5165-rb5: Switch on basic TCPM
  arm64: dts: qcom: qrb5165-rb5: Switch on TCPM usb-role-switching for
    usb_1
  arm64: dts: qcom: qrb5165-rb5: Switch on TCPM orientation-switch for
    usb_1_qmpphy

 .../bindings/mfd/qcom,spmi-pmic.yaml          |   4 +
 .../phy/qcom,sc7180-qmp-usb3-dp-phy.yaml      |  44 ++
 .../regulator/qcom,usb-vbus-regulator.yaml    |  10 +-
 .../bindings/usb/qcom,pmic-typec.yaml         | 190 ++++++
 MAINTAINERS                                   |  10 +
 arch/arm64/boot/dts/qcom/pm8150b.dtsi         |  40 ++
 arch/arm64/boot/dts/qcom/qrb5165-rb5.dts      |  54 +-
 arch/arm64/boot/dts/qcom/sm8250.dtsi          |  18 +
 drivers/usb/typec/Kconfig                     |  13 -
 drivers/usb/typec/Makefile                    |   1 -
 drivers/usb/typec/qcom-pmic-typec.c           | 261 --------
 drivers/usb/typec/tcpm/Kconfig                |  11 +
 drivers/usb/typec/tcpm/Makefile               |   1 +
 drivers/usb/typec/tcpm/qcom/Makefile          |   6 +
 drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c | 346 +++++++++++
 .../typec/tcpm/qcom/qcom_pmic_typec_pdphy.c   | 528 +++++++++++++++++
 .../typec/tcpm/qcom/qcom_pmic_typec_pdphy.h   | 119 ++++
 .../typec/tcpm/qcom/qcom_pmic_typec_port.c    | 556 ++++++++++++++++++
 .../typec/tcpm/qcom/qcom_pmic_typec_port.h    | 195 ++++++
 19 files changed, 2130 insertions(+), 277 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
 delete mode 100644 drivers/usb/typec/qcom-pmic-typec.c
 create mode 100644 drivers/usb/typec/tcpm/qcom/Makefile
 create mode 100644 drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c
 create mode 100644 drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c
 create mode 100644 drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.h
 create mode 100644 drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.c
 create mode 100644 drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.h