Show patches with: Submitter = Jun Li       |    Archived = No       |   89 patches
Patch Series A/R/T S/W/F Date Submitter Delegate State
usb: typec: tcpm: try to get role switch from tcpc fwnode usb: typec: tcpm: try to get role switch from tcpc fwnode - 1 - --- 2023-03-28 Jun Li Accepted
[v2] usb: dwc3: add several registers dump for debugfs [v2] usb: dwc3: add several registers dump for debugfs 1 - - --- 2023-03-17 Jun Li Accepted
[v2,2/2] usb: phy: generic: Add wakeup capability [v2,1/2] dt-bindings: usb: usb-nop-xceiv: add wakeup-source property - - - --- 2022-10-26 Jun Li Accepted
[v2,1/2] dt-bindings: usb: usb-nop-xceiv: add wakeup-source property [v2,1/2] dt-bindings: usb: usb-nop-xceiv: add wakeup-source property 1 - - --- 2022-10-26 Jun Li Accepted
[2/2] usb: phy: generic: Add wakeup capability [1/2] dt-bindings: usb: usb-nop-xceiv: add wakeup-source property - - - --- 2022-10-24 Jun Li Superseded
[1/2] dt-bindings: usb: usb-nop-xceiv: add wakeup-source property [1/2] dt-bindings: usb: usb-nop-xceiv: add wakeup-source property - - - --- 2022-10-24 Jun Li Superseded
[v3] usb: dwc3: add power down scale setting [v3] usb: dwc3: add power down scale setting - 1 - --- 2022-06-07 Jun Li Accepted
[v2] usb: dwc3: add power down scale setting [v2] usb: dwc3: add power down scale setting - 1 - --- 2022-06-06 Jun Li Superseded
usb: dwc3: add power down scale setting usb: dwc3: add power down scale setting - - - --- 2022-05-27 Jun Li Superseded
usb: dwc3: core: balance phy init and exit usb: dwc3: core: balance phy init and exit 1 - 2 --- 2021-09-08 Jun Li Accepted
[v3] usb: chipidea: host: fix port index underflow and UBSAN complains [v3] usb: chipidea: host: fix port index underflow and UBSAN complains - - - --- 2021-06-18 Jun Li Accepted
[v2] usb: chipidea: host: fix port index underflow and UBSAN complains [v2] usb: chipidea: host: fix port index underflow and UBSAN complains - - - --- 2021-06-18 Jun Li Superseded
usb: chipidea: host: fix port index underflow and UBSAN complains usb: chipidea: host: fix port index underflow and UBSAN complains - - - --- 2021-06-16 Jun Li Superseded
[3/3] usb: typec: tcpm: cancel send discover hrtimer when unregister tcpm port [1/3] usb: typec: tcpm: cancel vdm and state machine hrtimer when unregister tcpm port 1 1 - --- 2021-06-02 Jun Li Accepted
[2/3] usb: typec: tcpm: cancel frs hrtimer when unregister tcpm port [1/3] usb: typec: tcpm: cancel vdm and state machine hrtimer when unregister tcpm port 1 1 - --- 2021-06-02 Jun Li Accepted
[1/3] usb: typec: tcpm: cancel vdm and state machine hrtimer when unregister tcpm port [1/3] usb: typec: tcpm: cancel vdm and state machine hrtimer when unregister tcpm port 1 1 - --- 2021-06-02 Jun Li Accepted
usb: chipidea: udc: assign interrupt number to USB gadget structure usb: chipidea: udc: assign interrupt number to USB gadget structure - - 1 --- 2021-05-14 Jun Li Superseded
[v3,3/3] usb: core: hcd: use map_urb_for_dma for single step set feature urb [v3,1/3] usb: host: move EH SINGLE_STEP_SET_FEATURE implementation to core - - - --- 2021-05-07 Jun Li Superseded
[v3,2/3] usb: host: xhci: add EH SINGLE_STEP_SET_FEATURE Test for USB2 [v3,1/3] usb: host: move EH SINGLE_STEP_SET_FEATURE implementation to core - - - --- 2021-05-07 Jun Li Superseded
[v3,1/3] usb: host: move EH SINGLE_STEP_SET_FEATURE implementation to core [v3,1/3] usb: host: move EH SINGLE_STEP_SET_FEATURE implementation to core 1 - - --- 2021-05-07 Jun Li Superseded
usb: dwc3: imx8mp: detect dwc3 core node via compatible string usb: dwc3: imx8mp: detect dwc3 core node via compatible string 1 - - --- 2021-04-30 Jun Li Accepted
[v2,3/3] usb: core: hcd: use map_urb_for_dma for single step set feature urb [v2,1/3] usb: host: move EH SINGLE_STEP_SET_FEATURE implementation to core - - - --- 2021-04-30 Jun Li Superseded
[v2,2/3] usb: host: xhci: add EH SINGLE_STEP_SET_FEATURE Test for USB2 [v2,1/3] usb: host: move EH SINGLE_STEP_SET_FEATURE implementation to core - - - --- 2021-04-30 Jun Li Superseded
[v2,1/3] usb: host: move EH SINGLE_STEP_SET_FEATURE implementation to core [v2,1/3] usb: host: move EH SINGLE_STEP_SET_FEATURE implementation to core 1 - - --- 2021-04-30 Jun Li Superseded
[2/2] usb: host: xhci: add EH SINGLE_STEP_SET_FEATURE Test for USB2 [1/2] usb: host: move EH SINGLE_STEP_SET_FEATURE implementation to core - - - --- 2021-04-12 Jun Li Superseded
[1/2] usb: host: move EH SINGLE_STEP_SET_FEATURE implementation to core [1/2] usb: host: move EH SINGLE_STEP_SET_FEATURE implementation to core - - - --- 2021-04-12 Jun Li Superseded
usb: dwc3: core: don't enable wakeup for runtime PM usb: dwc3: core: don't enable wakeup for runtime PM - - - --- 2021-03-03 Jun Li Superseded
[RESEND,v5,4/4] arm64: dts: imx8mp-evk: enable usb1 as host mode add NXP imx8mp usb support - 1 - --- 2020-12-29 Jun Li Accepted
[RESEND,v5,3/4] arm64: dtsi: imx8mp: add usb nodes add NXP imx8mp usb support - 1 - --- 2020-12-29 Jun Li Accepted
[RESEND,v5,2/4] usb: dwc3: add imx8mp dwc3 glue layer driver add NXP imx8mp usb support - - - --- 2020-12-29 Jun Li Accepted
[RESEND,v5,1/4] dt-bindings: usb: dwc3-imx8mp: add imx8mp dwc3 glue bindings add NXP imx8mp usb support - 2 - --- 2020-12-29 Jun Li Accepted
[v2] usb: host: xhci: wait USB2 port enter suspend for bus suspend [v2] usb: host: xhci: wait USB2 port enter suspend for bus suspend - - - --- 2020-12-02 Jun Li Accepted
[v6,6/6] usb: typec: mux: add typec switch simple driver [v6,1/6] dt-bindings: usb: add documentation for typec switch simple driver 1 - - --- 2020-11-23 Jun Li Superseded
[v6,5/6] usb: typec: mux: add typec switch via general mux control [v6,1/6] dt-bindings: usb: add documentation for typec switch simple driver - - - --- 2020-11-23 Jun Li Superseded
[v6,4/6] usb: typec: mux: use fwnode's dev for driver module user count [v6,1/6] dt-bindings: usb: add documentation for typec switch simple driver 1 - - --- 2020-11-23 Jun Li Superseded
[v6,3/6] usb: typec: mux: add "compatible" property for switch match [v6,1/6] dt-bindings: usb: add documentation for typec switch simple driver 1 - - --- 2020-11-23 Jun Li Superseded
[v6,2/6] device property: Add fwnode_is_compatible() and device_is_compatible() helpers [v6,1/6] dt-bindings: usb: add documentation for typec switch simple driver - - - --- 2020-11-23 Jun Li Superseded
[v6,1/6] dt-bindings: usb: add documentation for typec switch simple driver [v6,1/6] dt-bindings: usb: add documentation for typec switch simple driver - - - --- 2020-11-23 Jun Li Superseded
[v5,4/4] usb: typec: mux: add typec switch simple driver [v5,1/4] dt-bindings: usb: add documentation for typec switch simple driver 1 - - --- 2020-11-03 Jun Li Superseded
[v5,3/4] usb: typec: mux: add "compatible" property for switch match [v5,1/4] dt-bindings: usb: add documentation for typec switch simple driver 1 - - --- 2020-11-03 Jun Li Superseded
[v5,2/4] device property: Add fwnode_is_compatible() and device_is_compatible() helpers [v5,1/4] dt-bindings: usb: add documentation for typec switch simple driver - - - --- 2020-11-03 Jun Li Superseded
[v5,1/4] dt-bindings: usb: add documentation for typec switch simple driver [v5,1/4] dt-bindings: usb: add documentation for typec switch simple driver - - - --- 2020-11-03 Jun Li Superseded
usb: host: xhci: wait USB2 port enter suspend for bus suspend usb: host: xhci: wait USB2 port enter suspend for bus suspend - - - --- 2020-11-03 Jun Li Superseded
[v4,4/4] usb: typec: mux: add typec switch simple driver [v4,1/4] dt-bindings: usb: add documentation for typec switch simple driver - - - --- 2020-10-19 Jun Li Superseded
[v4,3/4] usb: typec: mux: add "compatible" property for switch match [v4,1/4] dt-bindings: usb: add documentation for typec switch simple driver - - - --- 2020-10-19 Jun Li Superseded
[v4,2/4] device property: Add fwnode_is_compatible() and device_is_compatible() helpers [v4,1/4] dt-bindings: usb: add documentation for typec switch simple driver - - - --- 2020-10-19 Jun Li Superseded
[v4,1/4] dt-bindings: usb: add documentation for typec switch simple driver [v4,1/4] dt-bindings: usb: add documentation for typec switch simple driver - - - --- 2020-10-19 Jun Li Superseded
usb: typec: tcpm: reset hard_reset_count for any disconnect usb: typec: tcpm: reset hard_reset_count for any disconnect - 2 - --- 2020-10-12 Jun Li Accepted
[v3,6/6] arm64: dts: imx8mp-evk: enable usb1 as host mode add NXP imx8mp usb support - - - --- 2020-09-22 Jun Li Superseded
[v3,5/6] arm64: dtsi: imx8mp: add usb nodes add NXP imx8mp usb support - - - --- 2020-09-22 Jun Li Superseded
[v3,4/6] usb: dwc3: add imx8mp dwc3 glue layer driver add NXP imx8mp usb support - - - --- 2020-09-22 Jun Li Superseded
[v3,3/6] dt-bindings: usb: dwc3-imx8mp: add imx8mp dwc3 glue bindings add NXP imx8mp usb support - - - --- 2020-09-22 Jun Li Superseded
[v3,2/6] usb: host: xhci-plat: add support of XHCI_NO_64BIT_SUPPORT via property add NXP imx8mp usb support - - - --- 2020-09-22 Jun Li Superseded
[v3,1/6] dt-bindings: usb: xhci: add property to disable xhci 64bit support add NXP imx8mp usb support - - - --- 2020-09-22 Jun Li Superseded
[v3] usb: xhci: add debugfs support for ep with stream [v3] usb: xhci: add debugfs support for ep with stream - - - --- 2020-09-15 Jun Li Accepted
[2/2] usb: dwc3: core: add phy cleanup for probe error handling [1/2] usb: dwc3: core: don't trigger runtime pm when remove driver - - - --- 2020-07-28 Jun Li Accepted
[1/2] usb: dwc3: core: don't trigger runtime pm when remove driver [1/2] usb: dwc3: core: don't trigger runtime pm when remove driver - - - --- 2020-07-28 Jun Li Accepted
[v2] usb: dwc3: core: do not queue work if dr_mode is not USB_DR_MODE_OTG [v2] usb: dwc3: core: do not queue work if dr_mode is not USB_DR_MODE_OTG - - - --- 2020-07-26 Jun Li Accepted
usb: dwc3: debugfs: do not queue work if try to change mode on non-drd usb: dwc3: debugfs: do not queue work if try to change mode on non-drd - - - --- 2020-07-22 Jun Li Accepted
[v2] usb: xhci: add debugfs support for ep with stream [v2] usb: xhci: add debugfs support for ep with stream - - - --- 2020-07-16 Jun Li Superseded
usb: xhci: add debugfs support for ep with stream usb: xhci: add debugfs support for ep with stream - - - --- 2020-07-15 Jun Li Superseded
[6/6] dt-bindings: usb: dwc3-imx8mp: add imx8mp dwc3 glue bindings add NXP imx8mp usb support - - - --- 2020-06-09 Jun Li Superseded
[5/6] arm64: dts: imx8mp-evk: enable usb1 as host mode add NXP imx8mp usb support - - - --- 2020-06-09 Jun Li Superseded
[4/6] arm64: dtsi: imx8mp: add usb nodes add NXP imx8mp usb support - - - --- 2020-06-09 Jun Li Superseded
[3/6] usb: dwc3: add imx8mp dwc3 glue layer driver add NXP imx8mp usb support - - - --- 2020-06-09 Jun Li Superseded
[2/6] usb: host: xhci-plat: add quirk for XHCI_NO_64BIT_SUPPORT add NXP imx8mp usb support - - - --- 2020-06-09 Jun Li Superseded
[1/6] dt-bindings: usb: dwc3: add property to disable xhci 64bit support add NXP imx8mp usb support - - - --- 2020-06-09 Jun Li Superseded
[v3] usb: typec: tcpci_rt1711h: avoid screaming irq causing boot hangs [v3] usb: typec: tcpci_rt1711h: avoid screaming irq causing boot hangs - 2 - --- 2020-06-04 Jun Li Mainlined
[v2] usb: typec: tcpci_rt1711h: avoid screaming irq causing boot hangs [v2] usb: typec: tcpci_rt1711h: avoid screaming irq causing boot hangs - 2 1 --- 2020-06-03 Jun Li Superseded
usb: typec: tcpci_rt1711h: avoid screaming irq causing boot hangs usb: typec: tcpci_rt1711h: avoid screaming irq causing boot hangs - 1 - --- 2020-06-02 Jun Li Superseded
usb: dwc3: Increase timeout for CmdAct cleared by device controller usb: dwc3: Increase timeout for CmdAct cleared by device controller - - - --- 2020-05-21 Jun Li Mainlined
[v2] usb: host: xhci-plat: keep runtime active when remove host [v2] usb: host: xhci-plat: keep runtime active when remove host - 1 1 --- 2020-05-14 Jun Li Mainlined
usb: dwc3: core: don't do suspend for device mode if already suspended usb: dwc3: core: don't do suspend for device mode if already suspended - - - --- 2020-02-19 Jun Li Mainlined
usb: typec: tcpm: move to SNK_UNATTACHED if sink removed for DRP usb: typec: tcpm: move to SNK_UNATTACHED if sink removed for DRP - 2 - --- 2020-02-19 Jun Li Mainlined
[v3] usb: typec: tcpm: set correct data role for non-DRD [v3] usb: typec: tcpm: set correct data role for non-DRD - - - --- 2020-02-14 Jun Li Mainlined
[v2] usb: typec: tcpm: set correct data role for non-DRD [v2] usb: typec: tcpm: set correct data role for non-DRD - 1 - --- 2020-02-12 Jun Li Superseded
[v3] usb: typec: tcpci: mask event interrupts when remove driver [v3] usb: typec: tcpci: mask event interrupts when remove driver - 2 - --- 2020-01-20 Jun Li Mainlined
[v2] usb: typec: tcpci: mask event interrupts when remove driver [v2] usb: typec: tcpci: mask event interrupts when remove driver - - - --- 2020-01-20 Jun Li Superseded
usb: typec: tcpci: mask event interrupts when remove driver usb: typec: tcpci: mask event interrupts when remove driver - - - --- 2020-01-19 Jun Li Superseded
usb: chipidea: imx: check data->usbmisc_data against NULL before access usb: chipidea: imx: check data->usbmisc_data against NULL before access - - - --- 2019-10-09 Jun Li Mainlined
[v2] usb: chipidea: imx: enable vbus and id wakeup only for OTG events [v2] usb: chipidea: imx: enable vbus and id wakeup only for OTG events - - - --- 2019-09-09 Jun Li Mainlined
[v3] usb: chipidea: add role switch class support [v3] usb: chipidea: add role switch class support - - - --- 2019-08-14 Jun Li Superseded
[2/2] usb: typec: tcpm: remove tcpm dir if no children [1/2] usb: typec: tcpm: free log buf memory when remove debug file - 1 - --- 2019-07-17 Jun Li Mainlined
[1/2] usb: typec: tcpm: free log buf memory when remove debug file [1/2] usb: typec: tcpm: free log buf memory when remove debug file - 1 - --- 2019-07-17 Jun Li Mainlined
[2/5] usb: chipidea: add role switch class support [1/5] usb: chipidea: replace ci_role with usb_role - - - --- 2019-07-03 Jun Li Superseded
[1/5] usb: chipidea: replace ci_role with usb_role [1/5] usb: chipidea: replace ci_role with usb_role - - - --- 2019-07-03 Jun Li Superseded
usb: dwc3: move core validation to be after clks enable usb: dwc3: move core validation to be after clks enable - - - --- 2019-05-08 Jun Li Superseded
usb: chipidea: imx: remove unused header files usb: chipidea: imx: remove unused header files - - - --- 2019-01-23 Jun Li Mainlined
usb: typec: tpcm: improve error handling of tcpm_register_port usb: typec: tpcm: improve error handling of tcpm_register_port - 2 - --- 2019-01-22 Jun Li Mainlined