@@ -1493,7 +1493,7 @@ static int musb_core_init(u16 musb_type, struct musb *musb)
hw_ep->fifo = musb->io.fifo_offset(i) + mbase;
#if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010)
- if (musb->io.quirks & MUSB_IN_TUSB) {
+ if (musb->ops->quirks & MUSB_IN_TUSB) {
hw_ep->fifo_async = musb->async + 0x400 +
musb->io.fifo_offset(i);
hw_ep->fifo_sync = musb->sync + 0x400 +
@@ -2176,11 +2176,9 @@ static void musb_deassert_reset(struct work_struct *work)
goto fail2;
}
- if (musb->ops->quirks)
- musb->io.quirks = musb->ops->quirks;
/* Most devices use indexed offset or flat offset */
- if (musb->io.quirks & MUSB_INDEXED_EP) {
+ if (musb->ops->quirks & MUSB_INDEXED_EP) {
musb->io.ep_offset = musb_indexed_ep_offset;
musb->io.ep_select = musb_indexed_ep_select;
} else {
@@ -2188,7 +2186,7 @@ static void musb_deassert_reset(struct work_struct *work)
musb->io.ep_select = musb_flat_ep_select;
}
- if (musb->io.quirks & MUSB_G_NO_SKB_RESERVE)
+ if (musb->ops->quirks & MUSB_G_NO_SKB_RESERVE)
musb->g.quirk_avoids_skb_reserve = 1;
/* At least tusb6010 has its own offsets */
@@ -2647,7 +2645,7 @@ static int musb_suspend(struct device *dev)
;
musb->flush_irq_work = false;
- if (!(musb->io.quirks & MUSB_PRESERVE_SESSION))
+ if (!(musb->ops->quirks & MUSB_PRESERVE_SESSION))
musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
WARN_ON(!list_empty(&musb->pending_list));
@@ -614,7 +614,7 @@ static int cppi41_dma_channel_abort(struct dma_channel *channel)
}
/* DA8xx Advisory 2.3.27: wait 250 ms before to start the teardown */
- if (musb->io.quirks & MUSB_DA8XX)
+ if (musb->ops->quirks & MUSB_DA8XX)
mdelay(250);
tdbit = 1 << cppi41_channel->port_num;
@@ -773,7 +773,7 @@ struct dma_controller *
controller->controller.is_compatible = cppi41_is_compatible;
controller->controller.musb = musb;
- if (musb->io.quirks & MUSB_DA8XX) {
+ if (musb->ops->quirks & MUSB_DA8XX) {
controller->tdown_reg = DA8XX_USB_TEARDOWN;
controller->autoreq_reg = DA8XX_USB_AUTOREQ;
controller->set_dma_mode = da8xx_set_dma_mode;
@@ -44,31 +44,31 @@
#endif
#ifdef CONFIG_USB_UX500_DMA
-#define musb_dma_ux500(musb) (musb->io.quirks & MUSB_DMA_UX500)
+#define musb_dma_ux500(musb) (musb->ops->quirks & MUSB_DMA_UX500)
#else
#define musb_dma_ux500(musb) 0
#endif
#ifdef CONFIG_USB_TI_CPPI41_DMA
-#define musb_dma_cppi41(musb) (musb->io.quirks & MUSB_DMA_CPPI41)
+#define musb_dma_cppi41(musb) (musb->ops->quirks & MUSB_DMA_CPPI41)
#else
#define musb_dma_cppi41(musb) 0
#endif
#ifdef CONFIG_USB_TI_CPPI_DMA
-#define musb_dma_cppi(musb) (musb->io.quirks & MUSB_DMA_CPPI)
+#define musb_dma_cppi(musb) (musb->ops->quirks & MUSB_DMA_CPPI)
#else
#define musb_dma_cppi(musb) 0
#endif
#ifdef CONFIG_USB_TUSB_OMAP_DMA
-#define tusb_dma_omap(musb) (musb->io.quirks & MUSB_DMA_TUSB_OMAP)
+#define tusb_dma_omap(musb) (musb->ops->quirks & MUSB_DMA_TUSB_OMAP)
#else
#define tusb_dma_omap(musb) 0
#endif
#ifdef CONFIG_USB_INVENTRA_DMA
-#define musb_dma_inventra(musb) (musb->io.quirks & MUSB_DMA_INVENTRA)
+#define musb_dma_inventra(musb) (musb->ops->quirks & MUSB_DMA_INVENTRA)
#else
#define musb_dma_inventra(musb) 0
#endif
@@ -16,7 +16,6 @@
/**
* struct musb_io - IO functions for MUSB
- * @quirks: platform specific flags
* @ep_offset: platform specific function to get end point offset
* @ep_select: platform specific function to select end point
* @fifo_offset: platform specific function to get fifo offset
@@ -25,7 +24,6 @@
* @busctl_offset: platform specific function to get busctl offset
*/
struct musb_io {
- u32 quirks;
u32 (*ep_offset)(u8 epnum, u16 offset);
void (*ep_select)(void __iomem *mbase, u8 epnum);
u32 (*fifo_offset)(u8 epnum);
Both musb_io and musb_platform_ops in struct musb define a quirks flag for the same purpose. Let's remove the one in struct musb_io, and use that in struct musb_platform_ops instead. Signed-off-by: Bin Liu <b-liu@ti.com> --- drivers/usb/musb/musb_core.c | 10 ++++------ drivers/usb/musb/musb_cppi41.c | 4 ++-- drivers/usb/musb/musb_dma.h | 10 +++++----- drivers/usb/musb/musb_io.h | 2 -- 4 files changed, 11 insertions(+), 15 deletions(-)