@@ -201,7 +201,6 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci)
struct device *dev = musb->controller;
struct musb_hdrc_platform_data *plat = dev_get_platdata(dev);
struct omap_musb_board_data *data = plat->board_data;
- struct usb_otg *otg = musb->xceiv->otg;
unsigned long flags;
irqreturn_t ret = IRQ_NONE;
u32 epintr, usbintr;
@@ -264,14 +263,12 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci)
WARNING("VBUS error workaround (delay coming)\n");
} else if (drvvbus) {
MUSB_HST_MODE(musb);
- otg->default_a = 1;
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
portstate(musb->port1_status |= USB_PORT_STAT_POWER);
del_timer(&musb->dev_timer);
} else {
musb->is_active = 0;
MUSB_DEV_MODE(musb);
- otg->default_a = 0;
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
}
@@ -280,7 +280,6 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
WARNING("VBUS error workaround (delay coming)\n");
} else if (drvvbus) {
MUSB_HST_MODE(musb);
- otg->default_a = 1;
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
portstate(musb->port1_status |= USB_PORT_STAT_POWER);
del_timer(&musb->dev_timer);
@@ -295,7 +294,6 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
*/
musb->is_active = 0;
MUSB_DEV_MODE(musb);
- otg->default_a = 0;
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
}
@@ -311,14 +311,12 @@ static irqreturn_t davinci_musb_interrupt(int irq, void *__hci)
WARNING("VBUS error workaround (delay coming)\n");
} else if (drvvbus) {
MUSB_HST_MODE(musb);
- otg->default_a = 1;
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
portstate(musb->port1_status |= USB_PORT_STAT_POWER);
del_timer(&musb->dev_timer);
} else {
musb->is_active = 0;
MUSB_DEV_MODE(musb);
- otg->default_a = 0;
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
}
@@ -425,6 +423,9 @@ static int davinci_musb_init(struct musb *musb)
static int davinci_musb_exit(struct musb *musb)
{
+ int maxdelay = 30;
+ u8 devctl, warn = 0;
+
del_timer_sync(&musb->dev_timer);
/* force VBUS off */
@@ -438,31 +439,27 @@ static int davinci_musb_exit(struct musb *musb)
davinci_musb_source_power(musb, 0 /*off*/, 1);
- /* delay, to avoid problems with module reload */
- if (musb->xceiv->otg->default_a) {
- int maxdelay = 30;
- u8 devctl, warn = 0;
+ /*
+ * delay, to avoid problems with module reload.
+ * if there's no peripheral connected, this can take a
+ * long time to fall, especially on EVM with huge C133.
+ */
+ do {
+ devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+ if (!(devctl & MUSB_DEVCTL_VBUS))
+ break;
+ if ((devctl & MUSB_DEVCTL_VBUS) != warn) {
+ warn = devctl & MUSB_DEVCTL_VBUS;
+ dev_dbg(musb->controller, "VBUS %d\n",
+ warn >> MUSB_DEVCTL_VBUS_SHIFT);
+ }
+ msleep(1000);
+ maxdelay--;
+ } while (maxdelay > 0);
- /* if there's no peripheral connected, this can take a
- * long time to fall, especially on EVM with huge C133.
- */
- do {
- devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
- if (!(devctl & MUSB_DEVCTL_VBUS))
- break;
- if ((devctl & MUSB_DEVCTL_VBUS) != warn) {
- warn = devctl & MUSB_DEVCTL_VBUS;
- dev_dbg(musb->controller, "VBUS %d\n",
- warn >> MUSB_DEVCTL_VBUS_SHIFT);
- }
- msleep(1000);
- maxdelay--;
- } while (maxdelay > 0);
-
- /* in OTG mode, another host might be connected */
- if (devctl & MUSB_DEVCTL_VBUS)
- dev_dbg(musb->controller, "VBUS off timeout (devctl %02x)\n", devctl);
- }
+ /* in OTG mode, another host might be connected */
+ if (devctl & MUSB_DEVCTL_VBUS)
+ dev_dbg(musb->controller, "VBUS off timeout (devctl %02x)\n", devctl);
phy_off();
@@ -2352,13 +2352,8 @@ static void musb_deassert_reset(struct work_struct *work)
musb_writeb(musb->mregs, MUSB_ULPI_BUSCONTROL, busctl);
}
- if (musb->xceiv->otg->default_a) {
- MUSB_HST_MODE(musb);
- musb->xceiv->otg->state = OTG_STATE_A_IDLE;
- } else {
- MUSB_DEV_MODE(musb);
- musb->xceiv->otg->state = OTG_STATE_B_IDLE;
- }
+ MUSB_DEV_MODE(musb);
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
switch (musb->port_mode) {
case MUSB_HOST:
@@ -360,13 +360,11 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
WARNING("VBUS error workaround (delay coming)\n");
} else if (drvvbus) {
MUSB_HST_MODE(musb);
- musb->xceiv->otg->default_a = 1;
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
dsps_mod_timer_optional(glue);
} else {
musb->is_active = 0;
MUSB_DEV_MODE(musb);
- musb->xceiv->otg->default_a = 0;
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
}
@@ -1794,7 +1794,6 @@ int musb_gadget_setup(struct musb *musb)
musb->g.speed = USB_SPEED_UNKNOWN;
MUSB_DEV_MODE(musb);
- musb->xceiv->otg->default_a = 0;
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
/* this "gadget" abstracts/virtualizes the controller */
@@ -2752,7 +2752,6 @@ int musb_host_setup(struct musb *musb, int power_budget)
if (musb->port_mode == MUSB_HOST) {
MUSB_HST_MODE(musb);
- musb->xceiv->otg->default_a = 1;
musb->xceiv->otg->state = OTG_STATE_A_IDLE;
}
otg_set_host(musb->xceiv->otg, &hcd->self);
@@ -77,7 +77,6 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
otg_set_vbus(otg, 1);
} else {
musb->is_active = 1;
- otg->default_a = 1;
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
devctl |= MUSB_DEVCTL_SESSION;
MUSB_HST_MODE(musb);
@@ -89,7 +88,6 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
* jumping right to B_IDLE...
*/
- otg->default_a = 0;
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
devctl &= ~MUSB_DEVCTL_SESSION;
@@ -148,14 +146,12 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
struct musb_hdrc_platform_data *pdata =
dev_get_platdata(musb->controller);
struct omap_musb_board_data *data = pdata->board_data;
- struct usb_otg *otg = musb->xceiv->otg;
pm_runtime_get_sync(musb->controller);
switch (glue->status) {
case MUSB_ID_GROUND:
dev_dbg(musb->controller, "ID GND\n");
- otg->default_a = true;
musb->xceiv->otg->state = OTG_STATE_A_IDLE;
musb->xceiv->last_event = USB_EVENT_ID;
if (musb->gadget_driver) {
@@ -168,7 +164,6 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
case MUSB_VBUS_VALID:
dev_dbg(musb->controller, "VBUS Connect\n");
- otg->default_a = false;
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
musb->xceiv->last_event = USB_EVENT_VBUS;
omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
@@ -105,13 +105,11 @@ static void sunxi_musb_work(struct work_struct *work)
devctl = readb(musb->mregs + SUNXI_MUSB_DEVCTL);
if (test_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags)) {
set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
- musb->xceiv->otg->default_a = 1;
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
MUSB_HST_MODE(musb);
devctl |= MUSB_DEVCTL_SESSION;
} else {
clear_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
- musb->xceiv->otg->default_a = 0;
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
MUSB_DEV_MODE(musb);
devctl &= ~MUSB_DEVCTL_SESSION;
@@ -62,7 +62,6 @@ static void ux500_musb_set_vbus(struct musb *musb, int is_on)
} else {
musb->is_active = 1;
- musb->xceiv->otg->default_a = 1;
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
devctl |= MUSB_DEVCTL_SESSION;
MUSB_HST_MODE(musb);
@@ -73,7 +72,6 @@ static void ux500_musb_set_vbus(struct musb *musb, int is_on)
/* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and jumping
* right to B_IDLE...
*/
- musb->xceiv->otg->default_a = 0;
devctl &= ~MUSB_DEVCTL_SESSION;
MUSB_DEV_MODE(musb);
}
musb drivers do not use the otg fsm framework, so referencing to otg->default_a doesn't have any effect, so remove the references. But tusb6010 glue driver uses it locally to control the vbus power, so keep the references in tusb6010 only. Signed-off-by: Bin Liu <b-liu@ti.com> --- drivers/usb/musb/am35x.c | 3 --- drivers/usb/musb/da8xx.c | 2 -- drivers/usb/musb/davinci.c | 49 ++++++++++++++++++++---------------------- drivers/usb/musb/musb_core.c | 9 ++------ drivers/usb/musb/musb_dsps.c | 2 -- drivers/usb/musb/musb_gadget.c | 1 - drivers/usb/musb/musb_host.c | 1 - drivers/usb/musb/omap2430.c | 5 ----- drivers/usb/musb/sunxi.c | 2 -- drivers/usb/musb/ux500.c | 2 -- 10 files changed, 25 insertions(+), 51 deletions(-)