@@ -1576,6 +1576,74 @@ static int prepare_transfer(struct usbssp_udc *usbssp_data,
return 0;
}
+unsigned int count_trbs(u64 addr, u64 len)
+{
+ unsigned int num_trbs;
+
+ num_trbs = DIV_ROUND_UP(len + (addr & (TRB_MAX_BUFF_SIZE - 1)),
+ TRB_MAX_BUFF_SIZE);
+ if (num_trbs == 0)
+ num_trbs++;
+
+ return num_trbs;
+}
+
+static inline unsigned int count_trbs_needed(struct usbssp_request *req_priv)
+{
+ return count_trbs(req_priv->request.dma, req_priv->request.length);
+}
+
+static unsigned int count_sg_trbs_needed(struct usbssp_request *req_priv)
+{
+ struct scatterlist *sg;
+ unsigned int i, len, full_len, num_trbs = 0;
+
+ full_len = req_priv->request.length;
+
+ for_each_sg(req_priv->sg, sg, req_priv->num_pending_sgs, i) {
+ len = sg_dma_len(sg);
+ num_trbs += count_trbs(sg_dma_address(sg), len);
+ len = min_t(unsigned int, len, full_len);
+ full_len -= len;
+ if (full_len == 0)
+ break;
+ }
+
+ return num_trbs;
+}
+
+static void check_trb_math(struct usbssp_request *req_priv, int running_total)
+{
+ if (unlikely(running_total != req_priv->request.length))
+ dev_err(req_priv->dep->usbssp_data->dev,
+ "%s - ep %#x - Miscalculated tx length, "
+ "queued %#x (%d), asked for %#x (%d)\n",
+ __func__,
+ req_priv->dep->endpoint.desc->bEndpointAddress,
+ running_total, running_total,
+ req_priv->request.length,
+ req_priv->request.length);
+}
+
+static void giveback_first_trb(struct usbssp_udc *usbssp_data,
+ unsigned int ep_index,
+ unsigned int stream_id,
+ int start_cycle,
+ struct usbssp_generic_trb *start_trb)
+{
+ /*
+ * Pass all the TRBs to the hardware at once and make sure this write
+ * isn't reordered.
+ */
+ wmb();
+ if (start_cycle)
+ start_trb->field[3] |= cpu_to_le32(start_cycle);
+ else
+ start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
+
+ usbssp_ring_ep_doorbell(usbssp_data, ep_index, stream_id);
+}
+
/*
* USBSSP uses normal TRBs for both bulk and interrupt. When the interrupt
* endpoint is to be serviced, the DC will consume (at most) one TD. A TD
@@ -1631,12 +1699,228 @@ static u32 usbssp_td_remainder(struct usbssp_udc *usbssp_data,
return (total_packet_count - ((transferred + trb_buff_len) / maxp));
}
+static int usbssp_align_td(struct usbssp_udc *usbssp_data,
+ struct usbssp_request *req_priv, u32 enqd_len,
+ u32 *trb_buff_len, struct usbssp_segment *seg)
+{
+ struct device *dev = usbssp_data->dev;
+ unsigned int unalign;
+ unsigned int max_pkt;
+ u32 new_buff_len;
+
+ max_pkt = GET_MAX_PACKET(
+ usb_endpoint_maxp(req_priv->dep->endpoint.desc));
+ unalign = (enqd_len + *trb_buff_len) % max_pkt;
+
+ /* we got lucky, last normal TRB data on segment is packet aligned */
+ if (unalign == 0)
+ return 0;
+
+ usbssp_dbg(usbssp_data, "Unaligned %d bytes, buff len %d\n",
+ unalign, *trb_buff_len);
+
+ /* is the last nornal TRB alignable by splitting it */
+ if (*trb_buff_len > unalign) {
+ *trb_buff_len -= unalign;
+ usbssp_dbg(usbssp_data, "split align, new buff len %d\n",
+ *trb_buff_len);
+ return 0;
+ }
+
+ /*
+ * We want enqd_len + trb_buff_len to sum up to a number aligned to
+ * number which is divisible by the endpoint's wMaxPacketSize. IOW:
+ * (size of currently enqueued TRBs + remainder) % wMaxPacketSize == 0.
+ */
+ new_buff_len = max_pkt - (enqd_len % max_pkt);
+
+ if (new_buff_len > (req_priv->request.length - enqd_len))
+ new_buff_len = (req_priv->request.length - enqd_len);
+
+ /* create a max max_pkt sized bounce buffer pointed to by last trb */
+ if (req_priv->direction) {
+ sg_pcopy_to_buffer(req_priv->request.sg,
+ req_priv->request.num_mapped_sgs,
+ seg->bounce_buf, new_buff_len, enqd_len);
+ seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
+ max_pkt, DMA_TO_DEVICE);
+ } else {
+ seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
+ max_pkt, DMA_FROM_DEVICE);
+ }
+
+ if (dma_mapping_error(dev, seg->bounce_dma)) {
+ /* try without aligning.*/
+ usbssp_warn(usbssp_data,
+ "Failed mapping bounce buffer, not aligning\n");
+ return 0;
+ }
+ *trb_buff_len = new_buff_len;
+ seg->bounce_len = new_buff_len;
+ seg->bounce_offs = enqd_len;
+
+ usbssp_dbg(usbssp_data, "Bounce align, new buff len %d\n",
+ *trb_buff_len);
+
+ return 1;
+}
+
+
int usbssp_queue_bulk_tx(struct usbssp_udc *usbssp_data,
gfp_t mem_flags,
struct usbssp_request *req_priv,
unsigned int ep_index)
{
- /*TODO: function musb be implemented*/
+ struct usbssp_ring *ring;
+ struct usbssp_td *td;
+ struct usbssp_generic_trb *start_trb;
+ struct scatterlist *sg = NULL;
+ bool more_trbs_coming = true;
+ bool need_zero_pkt = false;
+ bool first_trb = true;
+ unsigned int num_trbs;
+ unsigned int start_cycle, num_sgs = 0;
+ unsigned int enqd_len, block_len, trb_buff_len, full_len;
+ int sent_len, ret;
+ u32 field, length_field, remainder;
+ u64 addr, send_addr;
+
+ ring = usbssp_request_to_transfer_ring(usbssp_data, req_priv);
+ if (!ring)
+ return -EINVAL;
+
+ full_len = req_priv->request.length;
+ /* If we have scatter/gather list, we use it. */
+ if (req_priv->request.num_sgs) {
+ num_sgs = req_priv->num_pending_sgs;
+ sg = req_priv->sg;
+ addr = (u64) sg_dma_address(sg);
+ block_len = sg_dma_len(sg);
+ num_trbs = count_sg_trbs_needed(req_priv);
+ } else {
+ num_trbs = count_trbs_needed(req_priv);
+ addr = (u64) req_priv->request.dma;
+ block_len = full_len;
+ }
+
+ ret = prepare_transfer(usbssp_data, &usbssp_data->devs,
+ ep_index, req_priv->request.stream_id,
+ num_trbs, req_priv, 0, mem_flags);
+ if (unlikely(ret < 0))
+ return ret;
+
+ /* Deal with request.zero - need one more td/trb */
+ if (req_priv->request.zero && req_priv->num_tds_done > 1)
+ need_zero_pkt = true;
+
+ td = &req_priv->td[0];
+
+ usbssp_dbg(usbssp_data, "Queue Bulk transfer to %s - ep_index: %d,"
+ " num trb: %d, block len %d, nzp: %d\n",
+ req_priv->dep->name, ep_index,
+ num_trbs, block_len, need_zero_pkt);
+
+ /*
+ * Don't give the first TRB to the hardware (by toggling the cycle bit)
+ * until we've finished creating all the other TRBs. The ring's cycle
+ * state may change as we enqueue the other TRBs, so save it too.
+ */
+ start_trb = &ring->enqueue->generic;
+ start_cycle = ring->cycle_state;
+ send_addr = addr;
+
+ /* Queue the TRBs, even if they are zero-length */
+ for (enqd_len = 0; first_trb || enqd_len < full_len;
+ enqd_len += trb_buff_len) {
+ field = TRB_TYPE(TRB_NORMAL);
+
+ /* TRB buffer should not cross 64KB boundaries */
+ trb_buff_len = TRB_BUFF_LEN_UP_TO_BOUNDARY(addr);
+ trb_buff_len = min_t(unsigned int, trb_buff_len, block_len);
+
+ if (enqd_len + trb_buff_len > full_len)
+ trb_buff_len = full_len - enqd_len;
+
+ /* Don't change the cycle bit of the first TRB until later */
+ if (first_trb) {
+ first_trb = false;
+ if (start_cycle == 0)
+ field |= TRB_CYCLE;
+ } else
+ field |= ring->cycle_state;
+
+ /* Chain all the TRBs together; clear the chain bit in the last
+ * TRB to indicate it's the last TRB in the chain.
+ */
+ if (enqd_len + trb_buff_len < full_len) {
+ field |= TRB_CHAIN;
+ if (trb_is_link(ring->enqueue + 1)) {
+ if (usbssp_align_td(usbssp_data, req_priv,
+ enqd_len, &trb_buff_len,
+ ring->enq_seg)) {
+ send_addr = ring->enq_seg->bounce_dma;
+ /* assuming TD won't span 2 segs */
+ td->bounce_seg = ring->enq_seg;
+ }
+ }
+ }
+ if (enqd_len + trb_buff_len >= full_len) {
+ field &= ~TRB_CHAIN;
+ field |= TRB_IOC;
+ more_trbs_coming = false;
+ td->last_trb = ring->enqueue;
+ }
+
+ /* Only set interrupt on short packet for OUT endpoints */
+ if (!req_priv->direction)
+ field |= TRB_ISP;
+
+ /* Set the TRB length, TD size, and interrupter fields. */
+ remainder = usbssp_td_remainder(usbssp_data, enqd_len,
+ trb_buff_len, full_len, req_priv,
+ more_trbs_coming);
+
+ length_field = TRB_LEN(trb_buff_len) |
+ TRB_TD_SIZE(remainder) |
+ TRB_INTR_TARGET(0);
+
+ queue_trb(usbssp_data, ring, more_trbs_coming | need_zero_pkt,
+ lower_32_bits(send_addr),
+ upper_32_bits(send_addr),
+ length_field,
+ field);
+
+ addr += trb_buff_len;
+ sent_len = trb_buff_len;
+
+ while (sg && sent_len >= block_len) {
+ /* New sg entry */
+ --num_sgs;
+ sent_len -= block_len;
+ if (num_sgs != 0) {
+ sg = sg_next(sg);
+ block_len = sg_dma_len(sg);
+ addr = (u64) sg_dma_address(sg);
+ addr += sent_len;
+ }
+ }
+ block_len -= sent_len;
+ send_addr = addr;
+ }
+
+ if (need_zero_pkt) {
+ ret = prepare_transfer(usbssp_data, &usbssp_data->devs,
+ ep_index, req_priv->request.stream_id,
+ 1, req_priv, 1, mem_flags);
+ req_priv->td[1].last_trb = ring->enqueue;
+ field = TRB_TYPE(TRB_NORMAL) | ring->cycle_state | TRB_IOC;
+ queue_trb(usbssp_data, ring, 0, 0, 0,
+ TRB_INTR_TARGET(0), field);
+ }
+
+ check_trb_math(req_priv, enqd_len);
+ giveback_first_trb(usbssp_data, ep_index, req_priv->request.stream_id,
+ start_cycle, start_trb);
return 0;
}
Patch adds usbssp_queue_bulk_tx and usbssp_queue_int_tx function that prepares TD, adds TD to transfer ring and arms the transfer. Signed-off-by: Pawel Laszczak <pawell@cadence.com> --- drivers/usb/usbssp/gadget-ring.c | 286 ++++++++++++++++++++++++++++++- 1 file changed, 285 insertions(+), 1 deletion(-)