diff mbox series

[v7,10/10] usb: dwc3: Check MISSED ISOC bit only for ISOC endpoints

Message ID 1543662811-5194-11-git-send-email-anurag.kumar.vulisha@xilinx.com (mailing list archive)
State New, archived
Headers show
Series usb: dwc3: Fix broken BULK stream support to dwc3 gadget driver | expand

Commit Message

Anurag Kumar Vulisha Dec. 1, 2018, 11:13 a.m. UTC 
When streaming is enabled on BULK endpoints and LST bit is set
observed MISSED ISOC bit set in event->status for BULK ep. Since
this bit is only valid for isocronous endpoints, changed the code
to check for isocrnous endpoints when MISSED ISOC bit is set.

Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
Reviewed-by: Thinh Nguyen <thinhn@synopsys.com>
Tested-by: Tejas Joglekar <tejas.joglekar@synopsys.com>
---
 Changes in v7:
	1. None

 Changes in v6:
	1. None

 Changes in v5:
	1. None

 Changes in v4:
	1. None

 Changes in v3:
	1. None

 Changes in v2:
	1. None
---
 drivers/usb/dwc3/gadget.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 216179e..5d5c572 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2409,7 +2409,8 @@  static void dwc3_gadget_endpoint_transfer_in_progress(struct dwc3_ep *dep,
 	if (event->status & DEPEVT_STATUS_BUSERR)
 		status = -ECONNRESET;
 
-	if (event->status & DEPEVT_STATUS_MISSED_ISOC) {
+	if ((event->status & DEPEVT_STATUS_MISSED_ISOC) &&
+	    usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
 		status = -EXDEV;
 
 		if (list_empty(&dep->started_list))