diff mbox series

[v7,08/10] usb: dwc3: Correct the logic for checking TRB full in __dwc3_prepare_one_trb()

Message ID 1543662811-5194-9-git-send-email-anurag.kumar.vulisha@xilinx.com (mailing list archive)
State New, archived
Headers show
Series usb: dwc3: Fix broken BULK stream support to dwc3 gadget driver | expand

Commit Message

Anurag Kumar Vulisha Dec. 1, 2018, 11:13 a.m. UTC 
Availability of TRB's is calculated using dwc3_calc_trbs_left(), which
determines total available TRB's based on the HWO bit set in a TRB.

In the present code, __dwc3_prepare_one_trb() is called with a TRB which
needs to be prepared for transfer. This __dwc3_prepare_one_trb() calls
dwc3_calc_trbs_left() to determine total available TRBs and set IOC bit
if the total available TRBs are zero. Since the present working TRB (which
is passed as an argument to __dwc3_prepare_one_trb() )  doesn't yet have
the HWO bit set before calling dwc3_calc_trbs_left(), there are chances
that dwc3_calc_trbs_left() wrongly calculates this present working TRB
as free(since the HWO bit is not yet set) and returns the total available
TRBs as greater than zero (including the present working TRB). This could
be a problem.

This patch corrects the above mentioned problem in __dwc3_prepare_one_trb()
by increementing the dep->trb_enqueue at the last (after preparing the TRB)
instead of increementing at the start and setting the IOC bit only if the
total available TRBs returned by dwc3_calc_trbs_left() is 1 . Since we are
increementing the dep->trb_enqueue at the last, the present working TRB is
also considered as available by dwc3_calc_trbs_left() and non zero value is
returned . So, according to the modified logic, when the total available
TRBs is equal to 1 that means the total available TRBs in the pool are 0.

Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
Reviewed-by: Thinh Nguyen <thinhn@synopsys.com>
Tested-by: Tejas Joglekar <tejas.joglekar@synopsys.com>
---
 Changes in v7:
	1. None

 Changes in v6:
	1. None

 Changes in v5:
	1. None

 Changes in v4:
	1. Corrected the commit message as suggested by "Thinh Nguyen"

 Changes in v3:
	1. Corrected the logic for setting HWO bit as suggested by "Thinh Nguyen"

 Changes in v2:
	1. Changed the commit message
---
 drivers/usb/dwc3/gadget.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index d0de7dc..9ddc9fd 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -920,8 +920,6 @@  static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb,
 	struct usb_gadget	*gadget = &dwc->gadget;
 	enum usb_device_speed	speed = gadget->speed;
 
-	dwc3_ep_inc_enq(dep);
-
 	trb->size = DWC3_TRB_SIZE_LENGTH(length);
 	trb->bpl = lower_32_bits(dma);
 	trb->bph = upper_32_bits(dma);
@@ -1000,7 +998,7 @@  static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb,
 	}
 
 	if ((!no_interrupt && !chain) ||
-			(dwc3_calc_trbs_left(dep) == 0))
+			(dwc3_calc_trbs_left(dep) == 1))
 		trb->ctrl |= DWC3_TRB_CTRL_IOC;
 
 	if (chain)
@@ -1020,6 +1018,8 @@  static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb,
 
 	trb->ctrl |= DWC3_TRB_CTRL_HWO;
 
+	dwc3_ep_inc_enq(dep);
+
 	trace_dwc3_prepare_trb(dep, trb);
 }