diff mbox series

[V3,1/3] USB: serial: f81232: clear overrun flag

Message ID 1553848122-1227-1-git-send-email-hpeter+linux_kernel@gmail.com (mailing list archive)
State Superseded
Headers show
Series [V3,1/3] USB: serial: f81232: clear overrun flag | expand

Commit Message

Ji-Ze Hong (Peter Hong) March 29, 2019, 8:28 a.m. UTC 
The F81232 will report data and LSR with bulk like following format:
bulk-in data: [LSR(1Byte)+DATA(1Byte)][LSR(1Byte)+DATA(1Byte)]...

LSR will auto clear frame/parity/break error flag when reading by H/W,
but overrrun will only cleared when reading LSR. So this patch add a
worker to read LSR when overrun and flush the worker on close() &
suspend().

Cc: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
---
 drivers/usb/serial/f81232.c | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

Comments

Johan Hovold March 29, 2019, 2:40 p.m. UTC | #1 
On Fri, Mar 29, 2019 at 04:28:40PM +0800, Ji-Ze Hong (Peter Hong) wrote:
> The F81232 will report data and LSR with bulk like following format:
> bulk-in data: [LSR(1Byte)+DATA(1Byte)][LSR(1Byte)+DATA(1Byte)]...
> 
> LSR will auto clear frame/parity/break error flag when reading by H/W,
> but overrrun will only cleared when reading LSR. So this patch add a
> worker to read LSR when overrun and flush the worker on close() &
> suspend().
> 
> Cc: Oliver Neukum <oneukum@suse.com>
> Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
> ---

What changed since v2? Please always make sure to include a changelog
here below the cut-off line.

Thanks,
Johan
diff mbox series

Patch

diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 0dcdcb4b2cde..722a184db9fa 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -41,12 +41,14 @@  MODULE_DEVICE_TABLE(usb, id_table);
 #define FIFO_CONTROL_REGISTER		(0x02 + SERIAL_BASE_ADDRESS)
 #define LINE_CONTROL_REGISTER		(0x03 + SERIAL_BASE_ADDRESS)
 #define MODEM_CONTROL_REGISTER		(0x04 + SERIAL_BASE_ADDRESS)
+#define LINE_STATUS_REGISTER		(0x05 + SERIAL_BASE_ADDRESS)
 #define MODEM_STATUS_REGISTER		(0x06 + SERIAL_BASE_ADDRESS)
 
 struct f81232_private {
 	struct mutex lock;
 	u8 modem_control;
 	u8 modem_status;
+	struct work_struct lsr_work;
 	struct work_struct interrupt_work;
 	struct usb_serial_port *port;
 };
@@ -282,6 +284,7 @@  static void f81232_read_int_callback(struct urb *urb)
 static void f81232_process_read_urb(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
+	struct f81232_private *priv = usb_get_serial_port_data(port);
 	unsigned char *data = urb->transfer_buffer;
 	char tty_flag;
 	unsigned int i;
@@ -315,6 +318,7 @@  static void f81232_process_read_urb(struct urb *urb)
 
 			if (lsr & UART_LSR_OE) {
 				port->icount.overrun++;
+				schedule_work(&priv->lsr_work);
 				tty_insert_flip_char(&port->port, 0,
 						TTY_OVERRUN);
 			}
@@ -556,9 +560,12 @@  static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 static void f81232_close(struct usb_serial_port *port)
 {
+	struct f81232_private *port_priv = usb_get_serial_port_data(port);
+
 	f81232_port_disable(port);
 	usb_serial_generic_close(port);
 	usb_kill_urb(port->interrupt_in_urb);
+	flush_work(&port_priv->lsr_work);
 }
 
 static void f81232_dtr_rts(struct usb_serial_port *port, int on)
@@ -603,6 +610,21 @@  static void  f81232_interrupt_work(struct work_struct *work)
 	f81232_read_msr(priv->port);
 }
 
+static void f81232_lsr_worker(struct work_struct *work)
+{
+	struct f81232_private *priv;
+	struct usb_serial_port *port;
+	int status;
+	u8 tmp;
+
+	priv = container_of(work, struct f81232_private, lsr_work);
+	port = priv->port;
+
+	status = f81232_get_register(port, LINE_STATUS_REGISTER, &tmp);
+	if (status)
+		dev_warn(&port->dev, "read LSR failed: %d\n", status);
+}
+
 static int f81232_port_probe(struct usb_serial_port *port)
 {
 	struct f81232_private *priv;
@@ -613,6 +635,7 @@  static int f81232_port_probe(struct usb_serial_port *port)
 
 	mutex_init(&priv->lock);
 	INIT_WORK(&priv->interrupt_work,  f81232_interrupt_work);
+	INIT_WORK(&priv->lsr_work, f81232_lsr_worker);
 
 	usb_set_serial_port_data(port, priv);
 
@@ -632,6 +655,16 @@  static int f81232_port_remove(struct usb_serial_port *port)
 	return 0;
 }
 
+static int f81232_suspend(struct usb_serial *serial, pm_message_t message)
+{
+	struct f81232_private *port_priv;
+
+	port_priv = usb_get_serial_port_data(serial->port[0]);
+	flush_work(&port_priv->lsr_work);
+
+	return 0;
+}
+
 static struct usb_serial_driver f81232_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
@@ -655,6 +688,7 @@  static struct usb_serial_driver f81232_device = {
 	.read_int_callback =	f81232_read_int_callback,
 	.port_probe =		f81232_port_probe,
 	.port_remove =		f81232_port_remove,
+	.suspend =		f81232_suspend,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {