@@ -351,6 +351,8 @@ struct renesas_usb3 {
int disabled_count;
struct usb_request *ep0_req;
+
+ enum usb_role connection_state;
u16 test_mode;
u8 ep0_buf[USB3_EP0_BUF_SIZE];
bool softconnect;
@@ -359,6 +361,7 @@ struct renesas_usb3 {
bool extcon_usb; /* check vbus and set EXTCON_USB */
bool forced_b_device;
bool start_to_connect;
+ bool role_sw_by_connector;
};
#define gadget_to_renesas_usb3(_gadget) \
@@ -699,8 +702,11 @@ static void usb3_mode_config(struct renesas_usb3 *usb3, bool host, bool a_dev)
unsigned long flags;
spin_lock_irqsave(&usb3->lock, flags);
- usb3_set_mode_by_role_sw(usb3, host);
- usb3_vbus_out(usb3, a_dev);
+ if (!usb3->role_sw_by_connector ||
+ usb3->connection_state != USB_ROLE_NONE) {
+ usb3_set_mode_by_role_sw(usb3, host);
+ usb3_vbus_out(usb3, a_dev);
+ }
/* for A-Peripheral or forced B-device mode */
if ((!host && a_dev) || usb3->start_to_connect)
usb3_connect(usb3);
@@ -716,7 +722,8 @@ static void usb3_check_id(struct renesas_usb3 *usb3)
{
usb3->extcon_host = usb3_is_a_device(usb3);
- if (usb3->extcon_host && !usb3->forced_b_device)
+ if ((!usb3->role_sw_by_connector && usb3->extcon_host &&
+ !usb3->forced_b_device) || usb3->connection_state == USB_ROLE_HOST)
usb3_mode_config(usb3, true, true);
else
usb3_mode_config(usb3, false, false);
@@ -2343,14 +2350,65 @@ static enum usb_role renesas_usb3_role_switch_get(struct device *dev)
return cur_role;
}
-static int renesas_usb3_role_switch_set(struct device *dev,
- enum usb_role role)
+static void handle_ext_role_switch_states(struct device *dev,
+ enum usb_role role)
+{
+ struct renesas_usb3 *usb3 = dev_get_drvdata(dev);
+ struct device *host = usb3->host_dev;
+ enum usb_role cur_role = renesas_usb3_role_switch_get(dev);
+
+ switch (role) {
+ case USB_ROLE_NONE:
+ usb3->connection_state = USB_ROLE_NONE;
+ if (usb3->driver)
+ usb3_disconnect(usb3);
+ usb3_vbus_out(usb3, false);
+ break;
+ case USB_ROLE_DEVICE:
+ if (usb3->connection_state == USB_ROLE_NONE) {
+ usb3->connection_state = USB_ROLE_DEVICE;
+ usb3_set_mode(usb3, false);
+ if (usb3->driver)
+ usb3_connect(usb3);
+ } else if (cur_role == USB_ROLE_HOST) {
+ device_release_driver(host);
+ usb3_set_mode(usb3, false);
+ if (usb3->driver)
+ usb3_connect(usb3);
+ }
+ usb3_vbus_out(usb3, false);
+ break;
+ case USB_ROLE_HOST:
+ if (usb3->connection_state == USB_ROLE_NONE) {
+ if (usb3->driver)
+ usb3_disconnect(usb3);
+
+ usb3->connection_state = USB_ROLE_HOST;
+ usb3_set_mode(usb3, true);
+ usb3_vbus_out(usb3, true);
+ if (device_attach(host) < 0)
+ dev_err(dev, "device_attach(host) failed\n");
+ } else if (cur_role == USB_ROLE_DEVICE) {
+ usb3_disconnect(usb3);
+ /* Must set the mode before device_attach of the host */
+ usb3_set_mode(usb3, true);
+ /* This device_attach() might sleep */
+ if (device_attach(host) < 0)
+ dev_err(dev, "device_attach(host) failed\n");
+ }
+ break;
+ default:
+ break;
+ }
+}
+
+static void handle_role_switch_states(struct device *dev,
+ enum usb_role role)
{
struct renesas_usb3 *usb3 = dev_get_drvdata(dev);
struct device *host = usb3->host_dev;
enum usb_role cur_role = renesas_usb3_role_switch_get(dev);
- pm_runtime_get_sync(dev);
if (cur_role == USB_ROLE_HOST && role == USB_ROLE_DEVICE) {
device_release_driver(host);
usb3_set_mode(usb3, false);
@@ -2361,6 +2419,20 @@ static int renesas_usb3_role_switch_set(struct device *dev,
if (device_attach(host) < 0)
dev_err(dev, "device_attach(host) failed\n");
}
+}
+
+static int renesas_usb3_role_switch_set(struct device *dev,
+ enum usb_role role)
+{
+ struct renesas_usb3 *usb3 = dev_get_drvdata(dev);
+
+ pm_runtime_get_sync(dev);
+
+ if (usb3->role_sw_by_connector)
+ handle_ext_role_switch_states(dev, role);
+ else
+ handle_role_switch_states(dev, role);
+
pm_runtime_put(dev);
return 0;
@@ -2650,7 +2722,7 @@ static const unsigned int renesas_usb3_cable[] = {
EXTCON_NONE,
};
-static const struct usb_role_switch_desc renesas_usb3_role_switch_desc = {
+static struct usb_role_switch_desc renesas_usb3_role_switch_desc = {
.set = renesas_usb3_role_switch_set,
.get = renesas_usb3_role_switch_get,
.allow_userspace_control = true,
@@ -2741,6 +2813,11 @@ static int renesas_usb3_probe(struct platform_device *pdev)
if (ret < 0)
goto err_dev_create;
+ if (device_property_read_bool(&pdev->dev, "usb-role-switch")) {
+ usb3->role_sw_by_connector = true;
+ renesas_usb3_role_switch_desc.fwnode = dev_fwnode(&pdev->dev);
+ }
+
INIT_WORK(&usb3->role_work, renesas_usb3_role_work);
usb3->role_sw = usb_role_switch_register(&pdev->dev,
&renesas_usb3_role_switch_desc);
The RZ/G2E cat874 board has a type-c connector connected to hd3ss3220 usb type-c drp port controller. Enhance role switch support to assign the role requested by connector device using the usb role switch class framework. Signed-off-by: Biju Das <biju.das@bp.renesas.com> --- V6-->V7 * Incorporated Shimoda-San and Chunfeng Yun's review comments (https://patchwork.kernel.org/patch/10944643/) V5-->V6 * Added graph api's to find the role supported by the connector. V4-->V5 * Incorporated Shimoda-san's review comment (https://patchwork.kernel.org/patch/10902537/) V3-->V4 * No Change V2-->V3 * Incorporated Shimoda-san's review comment (https://patchwork.kernel.org/patch/10852507/) * Used renesas,usb-role-switch property for differentiating USB role switch associated with Type-C port controller driver. V1-->V2 * Driver uses usb role clas for handling dual role switch and handling connect/disconnect events instead of extcon. --- drivers/usb/gadget/udc/renesas_usb3.c | 91 ++++++++++++++++++++++++++++++++--- 1 file changed, 84 insertions(+), 7 deletions(-)