@@ -65,6 +65,10 @@
#define XUSB_PADCTL_USB3_PAD_MUX_PCIE_IDDQ_DISABLE(x) (1 << (1 + (x)))
#define XUSB_PADCTL_USB3_PAD_MUX_SATA_IDDQ_DISABLE(x) (1 << (8 + (x)))
+#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL0(x) (0x080 + (x) * 0x40)
+#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL0_ZIP (1 << 18)
+#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL0_ZIN (1 << 22)
+
#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(x) (0x084 + (x) * 0x40)
#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_SHIFT 7
#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_MASK 0x3
@@ -227,6 +231,12 @@
#define XUSB_PADCTL_UPHY_USB3_PADX_ECTL6(x) (0xa74 + (x) * 0x40)
#define XUSB_PADCTL_UPHY_USB3_PAD_ECTL6_RX_EQ_CTRL_H_VAL 0xfcf01368
+#define XUSB_PADCTL_USB2_VBUS_ID 0xc60
+#define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_VBUS_ON (1 << 14)
+#define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_SHIFT 18
+#define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_MASK 0xf
+#define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_FLOATING 8
+
struct tegra210_xusb_fuse_calibration {
u32 hs_curr_level[4];
u32 hs_term_range_adj;
@@ -2016,6 +2026,51 @@ static const struct tegra_xusb_port_ops tegra210_usb3_port_ops = {
.map = tegra210_usb3_port_map,
};
+static int tegra210_xusb_padctl_vbus_override(struct tegra_xusb_padctl *padctl,
+ bool status)
+{
+ u32 value;
+
+ dev_dbg(padctl->dev, "%s vbus override\n", status ? "set" : "clear");
+
+ value = padctl_readl(padctl, XUSB_PADCTL_USB2_VBUS_ID);
+
+ if (status) {
+ value |= XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_VBUS_ON;
+ value &= ~(XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_MASK <<
+ XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_SHIFT);
+ value |= XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_FLOATING <<
+ XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_SHIFT;
+ } else
+ value &= ~XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_VBUS_ON;
+
+ padctl_writel(padctl, value, XUSB_PADCTL_USB2_VBUS_ID);
+
+ return 0;
+}
+
+static int tegra210_utmi_port_reset(struct phy *phy)
+{
+ struct tegra_xusb_padctl *padctl;
+ struct tegra_xusb_lane *lane;
+ u32 value;
+
+ lane = phy_get_drvdata(phy);
+ padctl = lane->pad->padctl;
+
+ value = padctl_readl(padctl,
+ XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL0(lane->index));
+
+ if ((value & XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL0_ZIP) ||
+ (value & XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL0_ZIN)) {
+ tegra210_xusb_padctl_vbus_override(padctl, false);
+ tegra210_xusb_padctl_vbus_override(padctl, true);
+ return 1;
+ }
+
+ return 0;
+}
+
static int
tegra210_xusb_read_fuse_calibration(struct tegra210_xusb_fuse_calibration *fuse)
{
@@ -2078,6 +2133,8 @@ static const struct tegra_xusb_padctl_ops tegra210_xusb_padctl_ops = {
.remove = tegra210_xusb_padctl_remove,
.usb3_set_lfps_detect = tegra210_usb3_set_lfps_detect,
.hsic_set_idle = tegra210_hsic_set_idle,
+ .vbus_override = tegra210_xusb_padctl_vbus_override,
+ .utmi_port_reset = tegra210_utmi_port_reset,
};
static const char * const tegra210_xusb_padctl_supply_names[] = {
@@ -1121,6 +1121,28 @@ int tegra_xusb_padctl_usb3_set_lfps_detect(struct tegra_xusb_padctl *padctl,
}
EXPORT_SYMBOL_GPL(tegra_xusb_padctl_usb3_set_lfps_detect);
+int tegra_xusb_padctl_set_vbus_override(struct tegra_xusb_padctl *padctl,
+ bool val)
+{
+ if (padctl->soc->ops->vbus_override)
+ return padctl->soc->ops->vbus_override(padctl, val);
+
+ return -ENOTSUPP;
+}
+EXPORT_SYMBOL_GPL(tegra_xusb_padctl_set_vbus_override);
+
+int tegra_phy_xusb_utmi_port_reset(struct phy *phy)
+{
+ struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+ struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+
+ if (padctl->soc->ops->utmi_port_reset)
+ return padctl->soc->ops->utmi_port_reset(phy);
+
+ return -ENOTSUPP;
+}
+EXPORT_SYMBOL_GPL(tegra_phy_xusb_utmi_port_reset);
+
MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
MODULE_DESCRIPTION("Tegra XUSB Pad Controller driver");
MODULE_LICENSE("GPL v2");
@@ -373,6 +373,8 @@ struct tegra_xusb_padctl_ops {
unsigned int index, bool idle);
int (*usb3_set_lfps_detect)(struct tegra_xusb_padctl *padctl,
unsigned int index, bool enable);
+ int (*vbus_override)(struct tegra_xusb_padctl *padctl, bool set);
+ int (*utmi_port_reset)(struct phy *phy);
};
struct tegra_xusb_padctl_soc {
@@ -18,5 +18,7 @@ int tegra_xusb_padctl_hsic_set_idle(struct tegra_xusb_padctl *padctl,
unsigned int port, bool idle);
int tegra_xusb_padctl_usb3_set_lfps_detect(struct tegra_xusb_padctl *padctl,
unsigned int port, bool enable);
-
+int tegra_xusb_padctl_set_vbus_override(struct tegra_xusb_padctl *padctl,
+ bool val);
+int tegra_phy_xusb_utmi_port_reset(struct phy *phy);
#endif /* PHY_TEGRA_XUSB_H */
Tegra XUSB device control driver needs to control vbus override during its operations, add API for the support. Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com> --- drivers/phy/tegra/xusb-tegra210.c | 57 +++++++++++++++++++++++++++++++++++++++ drivers/phy/tegra/xusb.c | 22 +++++++++++++++ drivers/phy/tegra/xusb.h | 2 ++ include/linux/phy/tegra/xusb.h | 4 ++- 4 files changed, 84 insertions(+), 1 deletion(-)