diff mbox series

[next,v9,09/11] usb: common: create Kconfig file

Message ID 1565695634-9711-10-git-send-email-chunfeng.yun@mediatek.com (mailing list archive)
State Superseded
Headers show
Series add USB GPIO based connection detection driver | expand

Commit Message

Chunfeng Yun Aug. 13, 2019, 11:27 a.m. UTC 
Create Kconfig file for USB common core, and move USB_LED_TRIG
and USB_ULPI_BUS configs into the new file from the parent Kconfig,
it will help to add new configs later.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v9 no changes

v8:
  new patch
---
 drivers/usb/Kconfig        | 35 +----------------------------------
 drivers/usb/common/Kconfig | 38 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 39 insertions(+), 34 deletions(-)
 create mode 100644 drivers/usb/common/Kconfig
diff mbox series

Patch

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 6e59d370ef81..7bf94e65ed2f 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -36,8 +36,7 @@  menuconfig USB_SUPPORT
 
 if USB_SUPPORT
 
-config USB_COMMON
-	tristate
+source "drivers/usb/common/Kconfig"
 
 config USB_ARCH_HAS_HCD
 	def_bool y
@@ -175,36 +174,4 @@  source "drivers/usb/typec/Kconfig"
 
 source "drivers/usb/roles/Kconfig"
 
-config USB_LED_TRIG
-	bool "USB LED Triggers"
-	depends on LEDS_CLASS && LEDS_TRIGGERS
-	select USB_COMMON
-	help
-	  This option adds LED triggers for USB host and/or gadget activity.
-
-	  Say Y here if you are working on a system with led-class supported
-	  LEDs and you want to use them as activity indicators for USB host or
-	  gadget.
-
-config USB_ULPI_BUS
-	tristate "USB ULPI PHY interface support"
-	select USB_COMMON
-	help
-	  UTMI+ Low Pin Interface (ULPI) is specification for a commonly used
-	  USB 2.0 PHY interface. The ULPI specification defines a standard set
-	  of registers that can be used to detect the vendor and product which
-	  allows ULPI to be handled as a bus. This module is the driver for that
-	  bus.
-
-	  The ULPI interfaces (the buses) are registered by the drivers for USB
-	  controllers which support ULPI register access and have ULPI PHY
-	  attached to them. The ULPI PHY drivers themselves are normal PHY
-	  drivers.
-
-	  ULPI PHYs provide often functions such as ADP sensing/probing (OTG
-	  protocol) and USB charger detection.
-
-	  To compile this driver as a module, choose M here: the module will
-	  be called ulpi.
-
 endif # USB_SUPPORT
diff --git a/drivers/usb/common/Kconfig b/drivers/usb/common/Kconfig
new file mode 100644
index 000000000000..848545b099cf
--- /dev/null
+++ b/drivers/usb/common/Kconfig
@@ -0,0 +1,38 @@ 
+# SPDX-License-Identifier: GPL-2.0
+
+config USB_COMMON
+	tristate
+
+
+config USB_LED_TRIG
+	bool "USB LED Triggers"
+	depends on LEDS_CLASS && LEDS_TRIGGERS
+	select USB_COMMON
+	help
+	  This option adds LED triggers for USB host and/or gadget activity.
+
+	  Say Y here if you are working on a system with led-class supported
+	  LEDs and you want to use them as activity indicators for USB host or
+	  gadget.
+
+config USB_ULPI_BUS
+	tristate "USB ULPI PHY interface support"
+	select USB_COMMON
+	help
+	  UTMI+ Low Pin Interface (ULPI) is specification for a commonly used
+	  USB 2.0 PHY interface. The ULPI specification defines a standard set
+	  of registers that can be used to detect the vendor and product which
+	  allows ULPI to be handled as a bus. This module is the driver for that
+	  bus.
+
+	  The ULPI interfaces (the buses) are registered by the drivers for USB
+	  controllers which support ULPI register access and have ULPI PHY
+	  attached to them. The ULPI PHY drivers themselves are normal PHY
+	  drivers.
+
+	  ULPI PHYs provide often functions such as ADP sensing/probing (OTG
+	  protocol) and USB charger detection.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called ulpi.
+