diff mbox series

[V7,6/8] arm64: tegra: Enable xudc on Jetson TX1

Message ID 1566553646-15338-7-git-send-email-nkristam@nvidia.com (mailing list archive)
State Superseded
Headers show
Series Tegra XUSB gadget driver support | expand

Commit Message

Nagarjuna Kristam Aug. 23, 2019, 9:47 a.m. UTC 
Enable XUSB device mode driver for USB0 slot on Jetson TX1.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Reviewed-by: JC Kuo <jckuo@nvidia.com>
---
 arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 31 +++++++++++++++++++++++++-
 1 file changed, 30 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index a7dc319..2c9de2b 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -1362,7 +1362,7 @@ 
 				status = "okay";
 
 				lanes {
-					usb2-0 {
+					micro_b: usb2-0 {
 						nvidia,function = "xusb";
 						status = "okay";
 					};
@@ -1483,6 +1483,21 @@ 
 		vmmc-supply = <&vdd_3v3_sd>;
 	};
 
+	usb@700d0000 {
+		status = "okay";
+		phys = <&micro_b>;
+		phy-names = "usb2";
+		avddio-usb-supply = <&vdd_3v3_sys>;
+		hvdd-usb-supply = <&vdd_1v8>;
+		usb-role-switch;
+
+		port {
+			usb_role_switch: endpoint {
+				remote-endpoint = <&usb_b_conn_ep>;
+			};
+		};
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -1641,4 +1656,18 @@ 
 			linux,code = <KEY_VOLUMEUP>;
 		};
 	};
+
+	usb_type_b: connector {
+		compatible = "linux,usb-conn-gpio", "usb-b-connector";
+		label = "micro-USB";
+		type = "micro";
+		vbus-gpio = <&gpio TEGRA_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+		port {
+			usb_b_conn_ep: endpoint {
+				remote-endpoint = <&usb_role_switch>;
+			};
+		};
+	};
+
 };