@@ -211,6 +211,7 @@ struct usbhs_priv;
/* DCPCTR */
#define BSTS (1 << 15) /* Buffer Status */
#define SUREQ (1 << 14) /* Sending SETUP Token */
+#define INBUFM (1 << 14) /* (PIPEnCTR) Transfer Buffer Monitor */
#define CSSTS (1 << 12) /* CSSTS Status */
#define ACLRM (1 << 9) /* Buffer Auto-Clear Mode */
#define SQCLR (1 << 8) /* Toggle Bit Clear */
@@ -89,7 +89,7 @@ static void __usbhsf_pkt_del(struct usbhs_pkt *pkt)
list_del_init(&pkt->node);
}
-static struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe)
+struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe)
{
return list_first_entry_or_null(&pipe->list, struct usbhs_pkt, node);
}
@@ -97,5 +97,6 @@ void usbhs_pkt_push(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt,
void *buf, int len, int zero, int sequence);
struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt);
void usbhs_pkt_start(struct usbhs_pipe *pipe);
+struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe);
#endif /* RENESAS_USB_FIFO_H */
@@ -722,6 +722,7 @@ static int __usbhsg_ep_set_halt_wedge(struct usb_ep *ep, int halt, int wedge)
struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
struct device *dev = usbhsg_gpriv_to_dev(gpriv);
unsigned long flags;
+ int ret = 0;
dev_dbg(dev, "set halt %d (pipe %d)\n",
halt, usbhs_pipe_number(pipe));
@@ -729,6 +730,18 @@ static int __usbhsg_ep_set_halt_wedge(struct usb_ep *ep, int halt, int wedge)
/******************** spin lock ********************/
usbhs_lock(priv, flags);
+ /*
+ * According to usb_ep_set_halt()'s description, this function should
+ * return -EAGAIN if the IN endpoint has any queue or data. Note
+ * that the usbhs_pipe_is_dir_in() returns false if the pipe is an
+ * IN endpoint in the gadget mode.
+ */
+ if (!usbhs_pipe_is_dir_in(pipe) && (__usbhsf_pkt_get(pipe) ||
+ usbhs_pipe_contains_transmittable_data(pipe))) {
+ ret = -EAGAIN;
+ goto out;
+ }
+
if (halt)
usbhs_pipe_stall(pipe);
else
@@ -739,10 +752,11 @@ static int __usbhsg_ep_set_halt_wedge(struct usb_ep *ep, int halt, int wedge)
else
usbhsg_status_clr(gpriv, USBHSG_STATUS_WEDGE);
+out:
usbhs_unlock(priv, flags);
/******************** spin unlock ******************/
- return 0;
+ return ret;
}
static int usbhsg_ep_set_halt(struct usb_ep *ep, int value)
@@ -277,6 +277,21 @@ int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe)
return -EBUSY;
}
+bool usbhs_pipe_contains_transmittable_data(struct usbhs_pipe *pipe)
+{
+ u16 val;
+
+ /* Do not support for DCP pipe */
+ if (usbhs_pipe_is_dcp(pipe))
+ return false;
+
+ val = usbhsp_pipectrl_get(pipe);
+ if (val & INBUFM)
+ return true;
+
+ return false;
+}
+
/*
* PID ctrl
*/
@@ -83,6 +83,7 @@ void usbhs_pipe_clear(struct usbhs_pipe *pipe);
void usbhs_pipe_clear_without_sequence(struct usbhs_pipe *pipe,
int needs_bfre, int bfre_enable);
int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe);
+bool usbhs_pipe_contains_transmittable_data(struct usbhs_pipe *pipe);
void usbhs_pipe_enable(struct usbhs_pipe *pipe);
void usbhs_pipe_disable(struct usbhs_pipe *pipe);
void usbhs_pipe_stall(struct usbhs_pipe *pipe);
According to usb_ep_set_halt()'s description, __usbhsg_ep_set_halt_wedge() should return -EAGAIN if the IN endpoint has any queue or data. Otherwise, this driver is possible to cause just STALL without sending a short packet data on g_mass_storage driver, and then a few resetting a device happens on a host side during a usb enumaration. Fixes: 2f98382dcdfe ("usb: renesas_usbhs: Add Renesas USBHS Gadget") Cc: <stable@vger.kernel.org> # v3.0+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> --- drivers/usb/renesas_usbhs/common.h | 1 + drivers/usb/renesas_usbhs/fifo.c | 2 +- drivers/usb/renesas_usbhs/fifo.h | 1 + drivers/usb/renesas_usbhs/mod_gadget.c | 16 +++++++++++++++- drivers/usb/renesas_usbhs/pipe.c | 15 +++++++++++++++ drivers/usb/renesas_usbhs/pipe.h | 1 + 6 files changed, 34 insertions(+), 2 deletions(-)